qemu-e2k/hw/mips/mips_r4k.c

308 lines
9.6 KiB
C
Raw Normal View History

/*
* QEMU/MIPS pseudo-board
*
* emulates a simple machine with ISA-like bus.
* ISA IO space mapped to the 0x14000000 (PHYS) and
* ISA memory at the 0x10000000 (PHYS, 16Mb in size).
* All peripherial devices are attached to this "bus" with
* the standard PC ISA addresses.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "hw/hw.h"
#include "hw/mips/mips.h"
#include "hw/mips/cpudevs.h"
#include "hw/i386/pc.h"
#include "hw/char/serial.h"
#include "hw/isa/isa.h"
#include "net/net.h"
#include "hw/net/ne2000-isa.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "hw/block/flash.h"
#include "qemu/log.h"
#include "hw/mips/bios.h"
#include "hw/ide.h"
#include "hw/loader.h"
#include "elf.h"
#include "hw/timer/mc146818rtc.h"
#include "hw/input/i8042.h"
#include "hw/timer/i8254.h"
#include "exec/address-spaces.h"
#include "sysemu/qtest.h"
#include "qemu/error-report.h"
#define MAX_IDE_BUS 2
static const int ide_iobase[2] = { 0x1f0, 0x170 };
static const int ide_iobase2[2] = { 0x3f6, 0x376 };
static const int ide_irq[2] = { 14, 15 };
static ISADevice *pit; /* PIT i8254 */
/* i8254 PIT is attached to the IRQ0 at PIC i8259 */
static struct _loaderparams {
int ram_size;
const char *kernel_filename;
const char *kernel_cmdline;
const char *initrd_filename;
} loaderparams;
static void mips_qemu_write (void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
if ((addr & 0xffff) == 0 && val == 42)
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
else if ((addr & 0xffff) == 4 && val == 42)
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
}
static uint64_t mips_qemu_read (void *opaque, hwaddr addr,
unsigned size)
{
return 0;
}
static const MemoryRegionOps mips_qemu_ops = {
.read = mips_qemu_read,
.write = mips_qemu_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
typedef struct ResetData {
MIPSCPU *cpu;
uint64_t vector;
} ResetData;
static int64_t load_kernel(void)
{
const size_t params_size = 264;
int64_t entry, kernel_high, initrd_size;
long kernel_size;
ram_addr_t initrd_offset;
uint32_t *params_buf;
int big_endian;
#ifdef TARGET_WORDS_BIGENDIAN
big_endian = 1;
#else
big_endian = 0;
#endif
kernel_size = load_elf(loaderparams.kernel_filename, NULL,
cpu_mips_kseg0_to_phys, NULL,
(uint64_t *)&entry, NULL,
(uint64_t *)&kernel_high, big_endian,
EM_MIPS, 1, 0);
if (kernel_size >= 0) {
if ((entry & ~0x7fffffffULL) == 0x80000000)
entry = (int32_t)entry;
} else {
hw/mips: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-6-armbru@redhat.com>
2018-02-03 09:43:06 +01:00
error_report("could not load kernel '%s': %s",
loaderparams.kernel_filename,
load_elf_strerror(kernel_size));
exit(1);
}
/* load initrd */
initrd_size = 0;
initrd_offset = 0;
if (loaderparams.initrd_filename) {
initrd_size = get_image_size (loaderparams.initrd_filename);
if (initrd_size > 0) {
initrd_offset = (kernel_high + ~INITRD_PAGE_MASK) & INITRD_PAGE_MASK;
if (initrd_offset + initrd_size > ram_size) {
hw/mips: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-6-armbru@redhat.com>
2018-02-03 09:43:06 +01:00
error_report("memory too small for initial ram disk '%s'",
loaderparams.initrd_filename);
exit(1);
}
initrd_size = load_image_targphys(loaderparams.initrd_filename,
initrd_offset,
ram_size - initrd_offset);
}
if (initrd_size == (target_ulong) -1) {
hw/mips: Replace fprintf(stderr, "*\n" with error_report() Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-6-armbru@redhat.com>
2018-02-03 09:43:06 +01:00
error_report("could not load initial ram disk '%s'",
loaderparams.initrd_filename);
exit(1);
}
}
/* Store command line. */
params_buf = g_malloc(params_size);
params_buf[0] = tswap32(ram_size);
params_buf[1] = tswap32(0x12345678);
if (initrd_size > 0) {
snprintf((char *)params_buf + 8, 256, "rd_start=0x%" PRIx64 " rd_size=%" PRId64 " %s",
cpu_mips_phys_to_kseg0(NULL, initrd_offset),
initrd_size, loaderparams.kernel_cmdline);
} else {
snprintf((char *)params_buf + 8, 256, "%s", loaderparams.kernel_cmdline);
}
rom_add_blob_fixed("params", params_buf, params_size,
16 * MiB - params_size);
g_free(params_buf);
return entry;
}
static void main_cpu_reset(void *opaque)
{
ResetData *s = (ResetData *)opaque;
CPUMIPSState *env = &s->cpu->env;
cpu_reset(CPU(s->cpu));
env->active_tc.PC = s->vector;
}
static const int sector_len = 32 * KiB;
static
void mips_r4k_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
char *filename;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *bios;
MemoryRegion *iomem = g_new(MemoryRegion, 1);
MemoryRegion *isa_io = g_new(MemoryRegion, 1);
MemoryRegion *isa_mem = g_new(MemoryRegion, 1);
int bios_size;
MIPSCPU *cpu;
CPUMIPSState *env;
ResetData *reset_info;
int i;
qemu_irq *i8259;
ISABus *isa_bus;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
DriveInfo *dinfo;
int be;
/* init CPUs */
cpu = MIPS_CPU(cpu_create(machine->cpu_type));
env = &cpu->env;
reset_info = g_malloc0(sizeof(ResetData));
reset_info->cpu = cpu;
reset_info->vector = env->active_tc.PC;
qemu_register_reset(main_cpu_reset, reset_info);
/* allocate RAM */
if (ram_size > 256 * MiB) {
error_report("Too much memory for this machine: %" PRId64 "MB,"
" maximum 256MB", ram_size / MiB);
exit(1);
}
memory_region_allocate_system_memory(ram, NULL, "mips_r4k.ram", ram_size);
memory_region_add_subregion(address_space_mem, 0, ram);
memory_region_init_io(iomem, NULL, &mips_qemu_ops, NULL, "mips-qemu", 0x10000);
memory_region_add_subregion(address_space_mem, 0x1fbf0000, iomem);
/* Try to load a BIOS image. If this fails, we continue regardless,
but initialize the hardware ourselves. When a kernel gets
preloaded we also initialize the hardware, since the BIOS wasn't
run. */
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (filename) {
bios_size = get_image_size(filename);
} else {
bios_size = -1;
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if ((bios_size > 0) && (bios_size <= BIOS_SIZE)) {
bios = g_new(MemoryRegion, 1);
memory_region_init_ram(bios, NULL, "mips_r4k.bios", BIOS_SIZE,
Fix bad error handling after memory_region_init_ram() Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-11 16:51:43 +02:00
&error_fatal);
memory_region_set_readonly(bios, true);
memory_region_add_subregion(get_system_memory(), 0x1fc00000, bios);
load_image_targphys(filename, 0x1fc00000, BIOS_SIZE);
} else if ((dinfo = drive_get(IF_PFLASH, 0, 0)) != NULL) {
uint32_t mips_rom = 0x00400000;
if (!pflash_cfi01_register(0x1fc00000, NULL, "mips_r4k.bios", mips_rom,
blk_by_legacy_dinfo(dinfo),
sector_len, mips_rom / sector_len,
4, 0, 0, 0, 0, be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-13 23:37:37 +01:00
}
} else if (!qtest_enabled()) {
Convert multi-line fprintf() to warn_report() Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"... to use warn_report() instead. This helps standardise on a single method of printing warnings to the user. All of the warnings were changed using these commands: find ./* -type f -exec sed -i \ 'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \ {} + Indentation fixed up manually afterwards. Some of the lines were manually edited to reduce the line length to below 80 charecters. Some of the lines with newlines in the middle of the string were also manually edit to avoid checkpatch errrors. The #include lines were manually updated to allow the code to compile. Several of the warning messages can be improved after this patch, to keep this patch mechanical this has been moved into a later patch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Jason Wang <jasowang@redhat.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-11 21:52:53 +02:00
/* not fatal */
warn_report("could not load MIPS bios '%s'", bios_name);
}
g_free(filename);
if (kernel_filename) {
loaderparams.ram_size = ram_size;
loaderparams.kernel_filename = kernel_filename;
loaderparams.kernel_cmdline = kernel_cmdline;
loaderparams.initrd_filename = initrd_filename;
reset_info->vector = load_kernel();
}
/* Init CPU internal devices */
cpu_mips_irq_init_cpu(cpu);
cpu_mips_clock_init(cpu);
/* ISA bus: IO space at 0x14000000, mem space at 0x10000000 */
memory_region_init_alias(isa_io, NULL, "isa-io",
get_system_io(), 0, 0x00010000);
memory_region_init(isa_mem, NULL, "isa-mem", 0x01000000);
memory_region_add_subregion(get_system_memory(), 0x14000000, isa_io);
memory_region_add_subregion(get_system_memory(), 0x10000000, isa_mem);
isa: Clean up error handling around isa_bus_new() We can have at most one ISA bus. If you try to create another one, isa_bus_new() complains to stderr and returns null. isa_bus_new() is called in two contexts, machine's init() and device's realize() methods. Since complaining to stderr is not proper in the latter context, convert isa_bus_new() to Error. Machine's init(): * mips_jazz_init(), called from the init() methods of machines "magnum" and "pica" * mips_r4k_init(), the init() method of machine "mips" * pc_init1() called from the init() methods of non-q35 PC machines * typhoon_init(), called from clipper_init(), the init() method of machine "clipper" These callers always create the first ISA bus, hence isa_bus_new() can't fail. Simply pass &error_abort. Device's realize(): * i82378_realize(), of PCI device "i82378" * ich9_lpc_realize(), of PCI device "ICH9-LPC" * pci_ebus_realize(), of PCI device "ebus" * piix3_realize(), of PCI device "pci-piix3", abstract parent of "PIIX3" and "PIIX3-xen" * piix4_realize(), of PCI device "PIIX4" * vt82c686b_realize(), of PCI device "VT82C686B" Propagate the error. Note that these devices are typically created only by machine init() methods with qdev_init_nofail() or similar. If we screwed up and created an ISA bus before that call, we now give up right away. Before, we'd hobble on, and typically die in isa_bus_irqs(). Similar if someone finds a way to hot-plug one of these critters. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2015-12-17 17:35:18 +01:00
isa_bus = isa_bus_new(NULL, isa_mem, get_system_io(), &error_abort);
/* The PIC is attached to the MIPS CPU INT0 pin */
i8259 = i8259_init(isa_bus, env->irq[2]);
isa_bus_irqs(isa_bus, i8259);
mc146818_rtc_init(isa_bus, 2000, NULL);
pit = i8254_pit_init(isa_bus, 0x40, 0, NULL);
serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS);
isa_vga_init(isa_bus);
if (nd_table[0].used)
isa_ne2000_init(isa_bus, 0x300, 9, &nd_table[0]);
ide_drive_get(hd, ARRAY_SIZE(hd));
for(i = 0; i < MAX_IDE_BUS; i++)
isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i],
hd[MAX_IDE_DEVS * i],
avoid TABs in files that only contain a few Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-13 23:37:37 +01:00
hd[MAX_IDE_DEVS * i + 1]);
isa_create_simple(isa_bus, TYPE_I8042);
}
static void mips_machine_init(MachineClass *mc)
{
mc->desc = "mips r4k platform";
mc->init = mips_r4k_init;
mc->block_default_type = IF_IDE;
#ifdef TARGET_MIPS64
mc->default_cpu_type = MIPS_CPU_TYPE_NAME("R4000");
#else
mc->default_cpu_type = MIPS_CPU_TYPE_NAME("24Kf");
#endif
}
DEFINE_MACHINE("mips", mips_machine_init)