OpenE2K
/
qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
qemu-e2k/default-configs/pci.mak

52 lines
1015 B
Makefile
Raw Normal View History

Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_PCI=y
Allow ISA bus to be configured out Currently, the code to handle the legacy ISA bus is always included in qemu. However there are lots of platforms that don't include ISA legacy devies, and quite a few that have never used ISA legacy devices at all. This patch allows the ISA bus code to be disabled in the configuration for platforms where it doesn't make sense. For now, the default configs are adjusted to include ISA on all platforms including PCI: anything with PCI can at least in principle add an i82378 PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak requires ISA support. We also explicitly enable ISA on some other non-PCI platforms which include ISA devices: moxie, sparc and unicore32. We may want to pare this down in future. The platforms that will lose ISA by default are: cris, lm32, microblazeel, microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can tell none of these ever used ISA. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-09 03:31:22 +01:00
# For now, CONFIG_IDE_CORE requires ISA, so we enable it here
CONFIG_ISA_BUS=y
Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_VIRTIO_PCI=y
hw: make virtio devices configurable via default-configs/ This is only half of the work, because the proxy devices (virtio-*-pci, virtio-*-ccw, etc.) are still included unconditionally. It is still a move in the right direction. Based-on: <20180522194943.24871-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-22 21:48:22 +02:00
include virtio.mak
Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_USB_UHCI=y
CONFIG_USB_OHCI=y
usb: add ehci adapter This patch finally merges the EHCI host adapter aka USB 2.0 support. Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci EHCI has a long out-of-tree history. Project was started by Mark Burkley, with contributions by Niels de Vos. David S. Ahern continued working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed bugfixes. /me (Gerd Hoffmann) picked it up where it left off, prepared the code for merge, fixed a few bugs and added basic user docs. Cc: David S. Ahern <daahern@cisco.com> Cc: Jan Kiszka <jan.kiszka@web.de> Cc: Kevin Wolf <mail@kevin-wolf.de> Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-03 16:17:28 +01:00
CONFIG_USB_EHCI=y
xhci: Initial xHCI implementation Based on the implementation from Hector Martin <hector@marcansoft.com> Hectors's implementation completely sidestepped the qemu usb system and used libusb directly for usb device pass through. So I've ripped out the libusb bits (or left them in disabled, as reference for further coding) and hooked up the qemu subsystem instead. That work is not complete yet though, partly due to limitations of the qemu usb subsystem. Nevertheless I think it is better to continue development in-tree, especially as the qemu usb bits need a bunch of improvements too for decent usb 3.0 support. Current state: - usb-storage emulation should work ok. - Devices which need constant polling (HID emulation like usb-tablet) are known to not work. - ISO xfers are not implemented yet. - superspeed ports are not implemented yet. - usb pass-through is completely untested so far. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-02-27 21:09:09 +01:00
CONFIG_USB_XHCI=y
xhci: add CONFIG_USB_XHCI_NEC option Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1451189 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170517103313.8459-2-kraxel@redhat.com
2017-05-17 12:33:13 +02:00
CONFIG_USB_XHCI_NEC=y
Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_NE2000_PCI=y
CONFIG_EEPRO100_PCI=y
CONFIG_PCNET_PCI=y
Split out common pcnet code The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 12:23:34 +01:00
CONFIG_PCNET_COMMON=y
audio: enable PCI audio cards for all PCI-enabled targets Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-18 18:44:04 +02:00
CONFIG_AC97=y
CONFIG_HDA=y
CONFIG_ES1370=y
hw: allow compiling out SCSI Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-22 21:44:55 +02:00
CONFIG_SCSI=y
Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_LSI_SCSI_PCI=y
scsi: VMWare PVSCSI paravirtual device implementation Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> [ Rename files to vmw_pvscsi, fix setting of hostStatus in pvscsi_request_cancelled - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 09:05:46 +02:00
CONFIG_VMW_PVSCSI_SCSI_PCI=y
Revert "megasas: disable due to build breakage" This reverts commit 92336855975805d88c7979f53bc05c2d47abab04. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-01 12:56:17 +02:00
CONFIG_MEGASAS_SCSI_PCI=y
hw: Add support for LSI SAS1068 (mptsas) device This adds the SAS1068 device, a SAS disk controller used in VMware that is oldish but widely supported and has decent performance. Unlike megasas, it presents itself as a SAS controller and not as a RAID controller. The device corresponds to the mptsas kernel driver in Linux. A few small things in the device setup are based on Don Slutz's old patch, but the device emulation was written from scratch based on Don's SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines shorter than Don's patch (and roughly the same size as MegaSAS---also because it doesn't support the similar SPI controller), implements SCSI task management functions (with asynchronous cancellation), supports big-endian hosts, has complete support for migration and follows the QEMU coding standards much more closely. To write the driver, I first split Don's patch in two parts, with the configuration bits in one file and the rest in a separate file. I first left mptconfig.c in place and rewrote the rest, then deleted mptconfig.c as well. The configuration pages are still based mostly on VirtualBox's, though not exactly the same. However, the implementation is completely different. The contents of the pages themselves should not be copyrightable. Signed-off-by: Don Slutz <Don@CloudSwitch.com> Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-27 18:26:06 +01:00
CONFIG_MPTSAS_SCSI_PCI=y
Fix previous commit Fix breakage from previous commit (missing pci.mak, and incorrect include in default-configs/s390x-softmmu.mak). Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 01:34:15 +01:00
CONFIG_RTL8139_PCI=y
CONFIG_E1000_PCI=y
hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Change the CONFIGs for PCI EXPRESS and make module name more clear for code files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-5-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-02 08:24:33 +01:00
CONFIG_E1000E_PCI_EXPRESS=y
config: move ide core and pci to pci.mak Every device that can do PCI should also be able to do IDE. So let's move the IDE definitions over to pci.mak. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 01:34:41 +01:00
CONFIG_IDE_CORE=y
CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
config: add ahci for pci capable machines This patch enables AHCI for all machines supporting PCI. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-14 01:34:42 +01:00
CONFIG_AHCI=y
esp: enable for all PCI machines Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-02 15:41:47 +02:00
CONFIG_ESP=y
esp: move PCI emulation to a new file esp-pci.c sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-04 21:10:04 +02:00
CONFIG_ESP_PCI=y
serial: add pci variant So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-17 09:54:20 +02:00
CONFIG_SERIAL=y
Split serial-isa into its own config option At present, the core device model code for 8250-like serial ports (serial.c) and the code for serial ports attached to ISA-style legacy IO (serial-isa.c) are both controlled by the CONFIG_SERIAL variable. There are lots and lots of embedded platforms that have 8250-like serial ports but have never had anything resembling ISA legacy IO. Therefore, split serial-isa into its own CONFIG_SERIAL_ISA option so it can be disabled for platforms where it's not appropriate. For now, I enabled CONFIG_SERIAL_ISA in every default-config where CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best as I can tell, those platforms never used legacy ISA, and also don't include PCI support (which would allow connection of a PCI->ISA bridge and/or a southbridge including legacy ISA serial ports). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-08 01:36:54 +01:00
CONFIG_SERIAL_ISA=y
serial: add pci variant So we get a hot-pluggable 16550 uart. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-17 09:54:20 +02:00
CONFIG_SERIAL_PCI=y
net/can: simple messages transport implementation for QEMU The CanBusState state structure is created for each emulated CAN channel. Individual clients/emulated CAN interfaces or host interface connection registers to the bus by CanBusClientState structure. The CAN core is prepared to support connection to the real host CAN bus network. The commit with such support for Linux SocketCAN follows. Implementation is as simple as possible. There is no state to be migrated, and messages prioritization and queuing are not considered for now. But it is intended to be extended when need arises. Development repository and more documentation at https://gitlab.fel.cvut.cz/canbus/qemu-canbus The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-27 17:41:07 +01:00
CONFIG_CAN_BUS=y
hw/net/can: SJA1000 chip register level emulation for QEMU The core SJA1000 support is independent of following patches which map SJA1000 chip to PCI boards. The work is based on Jin Yang GSoC 2013 work funded by Google and mentored in frame of RTEMS project GSoC slot donated to QEMU. Rewritten for QEMU-2.0+ versions and architecture cleanup by Pavel Pisa (Czech Technical University in Prague). Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-27 17:43:21 +01:00
CONFIG_CAN_SJA1000=y
hw/net/can: Kvaser PCI CAN-S (single SJA1000 channel) emulation Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-27 18:06:57 +01:00
CONFIG_CAN_PCI=y
Add TEWS TPCI200 IndustryPack emulation The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-11 18:25:29 +01:00
CONFIG_IPACK=y
hw: move watchdogs to hw/watchdog, configure via default-configs/ Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-05 12:27:44 +01:00
CONFIG_WDT_IB6300ESB=y
pci: add pci test device This device is used for kvm unit tests, currently it supports testing performance of ioeventfd. Using updated kvm unittest, here's an example output: mmio-no-eventfd:pci-mem 8796 mmio-wildcard-eventfd:pci-mem 3609 mmio-datamatch-eventfd:pci-mem 3685 portio-no-eventfd:pci-io 5287 portio-wildcard-eventfd:pci-io 1762 portio-datamatch-eventfd:pci-io 1777 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-31 14:31:14 +02:00
CONFIG_PCI_TESTDEV=y
NVMe: Initial commit for new storage interface Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci storage device. NVMe is an open, industry driven storage specification defining an optimized register and command set designed to deliver the full capabilities of non-volatile memory on PCIe SSDs. Further information may be found on the organizations website at: http://www.nvmexpress.org/ This commit implements the minimum from the specification to work with existing drivers. Cc: Keith Busch <keith.busch@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04 17:17:10 +02:00
CONFIG_NVME_PCI=y
sdhci: Support SDHCI devices on PCI Support for PCI devices following the "SD Host Controller Simplified Specification Version 2.00" spec. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-09 00:10:33 +01:00
CONFIG_SD=y
CONFIG_SDHCI=y
hw: misc, add educational driver I am using qemu for teaching the Linux kernel at our university. I wrote a simple PCI device that can answer to writes/reads, generate interrupts and perform DMA. As I am dragging it locally over 2 years, I am sending it to you now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [Fix 32-bit compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-21 17:48:33 +01:00
CONFIG_EDU=y
pci: Move PCI VGA to pci.mak Every platform that supports PCI can also spawn the Bochs VGA PCI adapter. Move it to pci.mak to enable it for everyone. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-13 06:46:08 +01:00
CONFIG_VGA=y
CONFIG_VGA_PCI=y
display: add separate config option for bochs-display This allows modern architectures which don't care about vga compatibility (risc-v for example) build bochs-display without including all vga emulation too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181005160147.892-2-kraxel@redhat.com
2018-10-05 18:01:46 +02:00
CONFIG_BOCHS_DISPLAY=y
configure: Use an explicit CONFIG_IVSHMEM rather than CONFIG_EVENTFD Rather than relying on everywhere that cares about whether the host supports ivshmem using CONFIG_EVENTFD, make configure set an explicit CONFIG_IVSHMEM. Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org [PMM: split out from another patch, add commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-14 10:33:44 +02:00
CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
rocker: add new rocker switch device Rocker is a simulated ethernet switch device. The device supports up to 62 front-panel ports and supports L2 switching and L3 routing functions, as well as L2/L3/L4 ACLs. The device presents a single PCI device for each switch, with a memory-mapped register space for device driver access. Rocker device is invoked with -device, for example a 4-port switch: -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \ ports[2]=dev2,ports[3]=dev3 Each port is a netdev and can be paired with using -netdev id=<port name>. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David Ahern <dsahern@gmail.com> Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com rocker: fix clang compiler errors Consolidate all forward typedef declarations to rocker.h. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> rocker: add support for flow modification We had support for flow add/del. This adds support for flow mod. I needed this for L3 support where an existing route is modified using NLM_F_REPLACE. For example: ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1 ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2 The first cmd adds the route. The second cmd changes the existing route by changing its nexthop info. In the device, a mod operation results in the matching flow enty being modified with the new settings. This is atomic to the device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-03-14 05:09:30 +01:00
CONFIG_ROCKER=y
hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Make hw/vfio configurable and add new CONFIG_VFIO_* to the default-configs/s390x*-softmmu.mak. This allow a finer-grain selection of the various VFIO backends. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-02 08:24:56 +01:00
CONFIG_VFIO=$(CONFIG_LINUX)
CONFIG_VFIO_PCI=y