qemu-e2k/qga/commands-posix.c

3306 lines
91 KiB
C
Raw Normal View History

/*
* QEMU Guest Agent POSIX-specific command implementations
*
* Copyright IBM Corp. 2011
*
* Authors:
* Michael Roth <mdroth@linux.vnet.ibm.com>
* Michal Privoznik <mprivozn@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include <sys/ioctl.h>
#include <sys/utsname.h>
#include <sys/wait.h>
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
#include <dirent.h>
#include "qemu-common.h"
#include "guest-agent-core.h"
#include "qga-qapi-commands.h"
#include "qapi/error.h"
#include "qapi/qmp/qerror.h"
#include "qemu/queue.h"
#include "qemu/host-utils.h"
#include "qemu/sockets.h"
#include "qemu/base64.h"
#include "qemu/cutils.h"
#include "commands-common.h"
#ifdef HAVE_UTMPX
#include <utmpx.h>
#endif
#ifndef CONFIG_HAS_ENVIRON
#ifdef __APPLE__
#include <crt_externs.h>
#define environ (*_NSGetEnviron())
#else
extern char **environ;
#endif
#endif
#if defined(__linux__)
#include <mntent.h>
#include <linux/fs.h>
#include <ifaddrs.h>
#include <arpa/inet.h>
#include <sys/socket.h>
#include <net/if.h>
#include <sys/statvfs.h>
#ifdef CONFIG_LIBUDEV
#include <libudev.h>
#endif
#ifdef FIFREEZE
#define CONFIG_FSFREEZE
#endif
#ifdef FITRIM
#define CONFIG_FSTRIM
#endif
#endif
static void ga_wait_child(pid_t pid, int *status, Error **errp)
{
pid_t rpid;
*status = 0;
do {
rpid = waitpid(pid, status, 0);
} while (rpid == -1 && errno == EINTR);
if (rpid == -1) {
error_setg_errno(errp, errno, "failed to wait for child (pid: %d)",
pid);
return;
}
g_assert(rpid == pid);
}
void qmp_guest_shutdown(bool has_mode, const char *mode, Error **errp)
{
const char *shutdown_flag;
Error *local_err = NULL;
pid_t pid;
int status;
slog("guest-shutdown called, mode: %s", mode);
if (!has_mode || strcmp(mode, "powerdown") == 0) {
shutdown_flag = "-P";
} else if (strcmp(mode, "halt") == 0) {
shutdown_flag = "-H";
} else if (strcmp(mode, "reboot") == 0) {
shutdown_flag = "-r";
} else {
error_setg(errp,
"mode is invalid (valid values are: halt|powerdown|reboot");
return;
}
pid = fork();
if (pid == 0) {
/* child, start the shutdown */
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
execle("/sbin/shutdown", "shutdown", "-h", shutdown_flag, "+0",
"hypervisor initiated shutdown", (char *)NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
return;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "child process has failed to shutdown");
return;
}
/* succeeded */
}
int64_t qmp_guest_get_time(Error **errp)
{
int ret;
qemu_timeval tq;
ret = qemu_gettimeofday(&tq);
if (ret < 0) {
error_setg_errno(errp, errno, "Failed to get time");
return -1;
}
return tq.tv_sec * 1000000000LL + tq.tv_usec * 1000;
}
void qmp_guest_set_time(bool has_time, int64_t time_ns, Error **errp)
{
int ret;
int status;
pid_t pid;
Error *local_err = NULL;
struct timeval tv;
static const char hwclock_path[] = "/sbin/hwclock";
static int hwclock_available = -1;
if (hwclock_available < 0) {
hwclock_available = (access(hwclock_path, X_OK) == 0);
}
if (!hwclock_available) {
error_setg(errp, QERR_UNSUPPORTED);
return;
}
/* If user has passed a time, validate and set it. */
if (has_time) {
GDate date = { 0, };
/* year-2038 will overflow in case time_t is 32bit */
if (time_ns / 1000000000 != (time_t)(time_ns / 1000000000)) {
error_setg(errp, "Time %" PRId64 " is too large", time_ns);
return;
}
tv.tv_sec = time_ns / 1000000000;
tv.tv_usec = (time_ns % 1000000000) / 1000;
g_date_set_time_t(&date, tv.tv_sec);
if (date.year < 1970 || date.year >= 2070) {
error_setg_errno(errp, errno, "Invalid time");
return;
}
ret = settimeofday(&tv, NULL);
if (ret < 0) {
error_setg_errno(errp, errno, "Failed to set time to guest");
return;
}
}
/* Now, if user has passed a time to set and the system time is set, we
* just need to synchronize the hardware clock. However, if no time was
* passed, user is requesting the opposite: set the system time from the
* hardware clock (RTC). */
pid = fork();
if (pid == 0) {
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
/* Use '/sbin/hwclock -w' to set RTC from the system time,
* or '/sbin/hwclock -s' to set the system time from RTC. */
execle(hwclock_path, "hwclock", has_time ? "-w" : "-s",
NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
return;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "hwclock failed to set hardware clock to system time");
return;
}
}
typedef enum {
RW_STATE_NEW,
RW_STATE_READING,
RW_STATE_WRITING,
} RwState;
struct GuestFileHandle {
uint64_t id;
FILE *fh;
RwState state;
QTAILQ_ENTRY(GuestFileHandle) next;
};
static struct {
QTAILQ_HEAD(, GuestFileHandle) filehandles;
} guest_file_state = {
.filehandles = QTAILQ_HEAD_INITIALIZER(guest_file_state.filehandles),
};
static int64_t guest_file_handle_add(FILE *fh, Error **errp)
{
GuestFileHandle *gfh;
int64_t handle;
handle = ga_get_fd_handle(ga_state, errp);
if (handle < 0) {
return -1;
}
gfh = g_new0(GuestFileHandle, 1);
gfh->id = handle;
gfh->fh = fh;
QTAILQ_INSERT_TAIL(&guest_file_state.filehandles, gfh, next);
return handle;
}
GuestFileHandle *guest_file_handle_find(int64_t id, Error **errp)
{
GuestFileHandle *gfh;
QTAILQ_FOREACH(gfh, &guest_file_state.filehandles, next)
{
if (gfh->id == id) {
return gfh;
}
}
error_setg(errp, "handle '%" PRId64 "' has not been found", id);
return NULL;
}
typedef const char * const ccpc;
#ifndef O_BINARY
#define O_BINARY 0
#endif
/* http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html */
static const struct {
ccpc *forms;
int oflag_base;
} guest_file_open_modes[] = {
{ (ccpc[]){ "r", NULL }, O_RDONLY },
{ (ccpc[]){ "rb", NULL }, O_RDONLY | O_BINARY },
{ (ccpc[]){ "w", NULL }, O_WRONLY | O_CREAT | O_TRUNC },
{ (ccpc[]){ "wb", NULL }, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY },
{ (ccpc[]){ "a", NULL }, O_WRONLY | O_CREAT | O_APPEND },
{ (ccpc[]){ "ab", NULL }, O_WRONLY | O_CREAT | O_APPEND | O_BINARY },
{ (ccpc[]){ "r+", NULL }, O_RDWR },
{ (ccpc[]){ "rb+", "r+b", NULL }, O_RDWR | O_BINARY },
{ (ccpc[]){ "w+", NULL }, O_RDWR | O_CREAT | O_TRUNC },
{ (ccpc[]){ "wb+", "w+b", NULL }, O_RDWR | O_CREAT | O_TRUNC | O_BINARY },
{ (ccpc[]){ "a+", NULL }, O_RDWR | O_CREAT | O_APPEND },
{ (ccpc[]){ "ab+", "a+b", NULL }, O_RDWR | O_CREAT | O_APPEND | O_BINARY }
};
static int
find_open_flag(const char *mode_str, Error **errp)
{
unsigned mode;
for (mode = 0; mode < ARRAY_SIZE(guest_file_open_modes); ++mode) {
ccpc *form;
form = guest_file_open_modes[mode].forms;
while (*form != NULL && strcmp(*form, mode_str) != 0) {
++form;
}
if (*form != NULL) {
break;
}
}
if (mode == ARRAY_SIZE(guest_file_open_modes)) {
error_setg(errp, "invalid file open mode '%s'", mode_str);
return -1;
}
return guest_file_open_modes[mode].oflag_base | O_NOCTTY | O_NONBLOCK;
}
#define DEFAULT_NEW_FILE_MODE (S_IRUSR | S_IWUSR | \
S_IRGRP | S_IWGRP | \
S_IROTH | S_IWOTH)
static FILE *
safe_open_or_create(const char *path, const char *mode, Error **errp)
{
Error *local_err = NULL;
int oflag;
oflag = find_open_flag(mode, &local_err);
if (local_err == NULL) {
int fd;
/* If the caller wants / allows creation of a new file, we implement it
* with a two step process: open() + (open() / fchmod()).
*
* First we insist on creating the file exclusively as a new file. If
* that succeeds, we're free to set any file-mode bits on it. (The
* motivation is that we want to set those file-mode bits independently
* of the current umask.)
*
* If the exclusive creation fails because the file already exists
* (EEXIST is not possible for any other reason), we just attempt to
* open the file, but in this case we won't be allowed to change the
* file-mode bits on the preexistent file.
*
* The pathname should never disappear between the two open()s in
* practice. If it happens, then someone very likely tried to race us.
* In this case just go ahead and report the ENOENT from the second
* open() to the caller.
*
* If the caller wants to open a preexistent file, then the first
* open() is decisive and its third argument is ignored, and the second
* open() and the fchmod() are never called.
*/
fd = open(path, oflag | ((oflag & O_CREAT) ? O_EXCL : 0), 0);
if (fd == -1 && errno == EEXIST) {
oflag &= ~(unsigned)O_CREAT;
fd = open(path, oflag);
}
if (fd == -1) {
error_setg_errno(&local_err, errno, "failed to open file '%s' "
"(mode: '%s')", path, mode);
} else {
qemu_set_cloexec(fd);
if ((oflag & O_CREAT) && fchmod(fd, DEFAULT_NEW_FILE_MODE) == -1) {
error_setg_errno(&local_err, errno, "failed to set permission "
"0%03o on new file '%s' (mode: '%s')",
(unsigned)DEFAULT_NEW_FILE_MODE, path, mode);
} else {
FILE *f;
f = fdopen(fd, mode);
if (f == NULL) {
error_setg_errno(&local_err, errno, "failed to associate "
"stdio stream with file descriptor %d, "
"file '%s' (mode: '%s')", fd, path, mode);
} else {
return f;
}
}
close(fd);
if (oflag & O_CREAT) {
unlink(path);
}
}
}
error_propagate(errp, local_err);
return NULL;
}
int64_t qmp_guest_file_open(const char *path, bool has_mode, const char *mode,
Error **errp)
{
FILE *fh;
Error *local_err = NULL;
int64_t handle;
if (!has_mode) {
mode = "r";
}
slog("guest-file-open called, filepath: %s, mode: %s", path, mode);
fh = safe_open_or_create(path, mode, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return -1;
}
/* set fd non-blocking to avoid common use cases (like reading from a
* named pipe) from hanging the agent
*/
qemu_set_nonblock(fileno(fh));
handle = guest_file_handle_add(fh, errp);
if (handle < 0) {
fclose(fh);
return -1;
}
slog("guest-file-open, handle: %" PRId64, handle);
return handle;
}
void qmp_guest_file_close(int64_t handle, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
int ret;
slog("guest-file-close called, handle: %" PRId64, handle);
if (!gfh) {
return;
}
ret = fclose(gfh->fh);
if (ret == EOF) {
error_setg_errno(errp, errno, "failed to close handle");
return;
}
QTAILQ_REMOVE(&guest_file_state.filehandles, gfh, next);
g_free(gfh);
}
GuestFileRead *guest_file_read_unsafe(GuestFileHandle *gfh,
int64_t count, Error **errp)
{
GuestFileRead *read_data = NULL;
guchar *buf;
FILE *fh = gfh->fh;
size_t read_count;
/* explicitly flush when switching from writing to reading */
if (gfh->state == RW_STATE_WRITING) {
int ret = fflush(fh);
if (ret == EOF) {
error_setg_errno(errp, errno, "failed to flush file");
return NULL;
}
gfh->state = RW_STATE_NEW;
}
buf = g_malloc0(count + 1);
read_count = fread(buf, 1, count, fh);
if (ferror(fh)) {
error_setg_errno(errp, errno, "failed to read file");
} else {
buf[read_count] = 0;
read_data = g_new0(GuestFileRead, 1);
read_data->count = read_count;
read_data->eof = feof(fh);
if (read_count) {
read_data->buf_b64 = g_base64_encode(buf, read_count);
}
gfh->state = RW_STATE_READING;
}
g_free(buf);
clearerr(fh);
return read_data;
}
GuestFileWrite *qmp_guest_file_write(int64_t handle, const char *buf_b64,
bool has_count, int64_t count,
Error **errp)
{
GuestFileWrite *write_data = NULL;
guchar *buf;
gsize buf_len;
int write_count;
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
FILE *fh;
if (!gfh) {
return NULL;
}
fh = gfh->fh;
if (gfh->state == RW_STATE_READING) {
int ret = fseek(fh, 0, SEEK_CUR);
if (ret == -1) {
error_setg_errno(errp, errno, "failed to seek file");
return NULL;
}
gfh->state = RW_STATE_NEW;
}
buf = qbase64_decode(buf_b64, -1, &buf_len, errp);
if (!buf) {
return NULL;
}
if (!has_count) {
count = buf_len;
} else if (count < 0 || count > buf_len) {
error_setg(errp, "value '%" PRId64 "' is invalid for argument count",
count);
g_free(buf);
return NULL;
}
write_count = fwrite(buf, 1, count, fh);
if (ferror(fh)) {
error_setg_errno(errp, errno, "failed to write to file");
slog("guest-file-write failed, handle: %" PRId64, handle);
} else {
write_data = g_new0(GuestFileWrite, 1);
write_data->count = write_count;
write_data->eof = feof(fh);
gfh->state = RW_STATE_WRITING;
}
g_free(buf);
clearerr(fh);
return write_data;
}
struct GuestFileSeek *qmp_guest_file_seek(int64_t handle, int64_t offset,
GuestFileWhence *whence_code,
Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
GuestFileSeek *seek_data = NULL;
FILE *fh;
int ret;
int whence;
Error *err = NULL;
if (!gfh) {
return NULL;
}
/* We stupidly exposed 'whence':'int' in our qapi */
whence = ga_parse_whence(whence_code, &err);
if (err) {
error_propagate(errp, err);
return NULL;
}
fh = gfh->fh;
ret = fseek(fh, offset, whence);
if (ret == -1) {
error_setg_errno(errp, errno, "failed to seek file");
if (errno == ESPIPE) {
/* file is non-seekable, stdio shouldn't be buffering anyways */
gfh->state = RW_STATE_NEW;
}
} else {
seek_data = g_new0(GuestFileSeek, 1);
seek_data->position = ftell(fh);
seek_data->eof = feof(fh);
gfh->state = RW_STATE_NEW;
}
clearerr(fh);
return seek_data;
}
void qmp_guest_file_flush(int64_t handle, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
FILE *fh;
int ret;
if (!gfh) {
return;
}
fh = gfh->fh;
ret = fflush(fh);
if (ret == EOF) {
error_setg_errno(errp, errno, "failed to flush file");
} else {
gfh->state = RW_STATE_NEW;
}
}
/* linux-specific implementations. avoid this if at all possible. */
#if defined(__linux__)
#if defined(CONFIG_FSFREEZE) || defined(CONFIG_FSTRIM)
typedef struct FsMount {
char *dirname;
char *devtype;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
unsigned int devmajor, devminor;
QTAILQ_ENTRY(FsMount) next;
} FsMount;
typedef QTAILQ_HEAD(FsMountList, FsMount) FsMountList;
static void free_fs_mount_list(FsMountList *mounts)
{
FsMount *mount, *temp;
if (!mounts) {
return;
}
QTAILQ_FOREACH_SAFE(mount, mounts, next, temp) {
QTAILQ_REMOVE(mounts, mount, next);
g_free(mount->dirname);
g_free(mount->devtype);
g_free(mount);
}
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static int dev_major_minor(const char *devpath,
unsigned int *devmajor, unsigned int *devminor)
{
struct stat st;
*devmajor = 0;
*devminor = 0;
if (stat(devpath, &st) < 0) {
slog("failed to stat device file '%s': %s", devpath, strerror(errno));
return -1;
}
if (S_ISDIR(st.st_mode)) {
/* It is bind mount */
return -2;
}
if (S_ISBLK(st.st_mode)) {
*devmajor = major(st.st_rdev);
*devminor = minor(st.st_rdev);
return 0;
}
return -1;
}
/*
* Walk the mount table and build a list of local file systems
*/
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static void build_fs_mount_list_from_mtab(FsMountList *mounts, Error **errp)
{
struct mntent *ment;
FsMount *mount;
char const *mtab = "/proc/self/mounts";
FILE *fp;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
unsigned int devmajor, devminor;
fp = setmntent(mtab, "r");
if (!fp) {
error_setg(errp, "failed to open mtab file: '%s'", mtab);
return;
}
while ((ment = getmntent(fp))) {
/*
* An entry which device name doesn't start with a '/' is
* either a dummy file system or a network file system.
* Add special handling for smbfs and cifs as is done by
* coreutils as well.
*/
if ((ment->mnt_fsname[0] != '/') ||
(strcmp(ment->mnt_type, "smbfs") == 0) ||
(strcmp(ment->mnt_type, "cifs") == 0)) {
continue;
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (dev_major_minor(ment->mnt_fsname, &devmajor, &devminor) == -2) {
/* Skip bind mounts */
continue;
}
mount = g_new0(FsMount, 1);
mount->dirname = g_strdup(ment->mnt_dir);
mount->devtype = g_strdup(ment->mnt_type);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
mount->devmajor = devmajor;
mount->devminor = devminor;
QTAILQ_INSERT_TAIL(mounts, mount, next);
}
endmntent(fp);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static void decode_mntname(char *name, int len)
{
int i, j = 0;
for (i = 0; i <= len; i++) {
if (name[i] != '\\') {
name[j++] = name[i];
} else if (name[i + 1] == '\\') {
name[j++] = '\\';
i++;
} else if (name[i + 1] >= '0' && name[i + 1] <= '3' &&
name[i + 2] >= '0' && name[i + 2] <= '7' &&
name[i + 3] >= '0' && name[i + 3] <= '7') {
name[j++] = (name[i + 1] - '0') * 64 +
(name[i + 2] - '0') * 8 +
(name[i + 3] - '0');
i += 3;
} else {
name[j++] = name[i];
}
}
}
static void build_fs_mount_list(FsMountList *mounts, Error **errp)
{
FsMount *mount;
char const *mountinfo = "/proc/self/mountinfo";
FILE *fp;
char *line = NULL, *dash;
size_t n;
char check;
unsigned int devmajor, devminor;
int ret, dir_s, dir_e, type_s, type_e, dev_s, dev_e;
fp = fopen(mountinfo, "r");
if (!fp) {
build_fs_mount_list_from_mtab(mounts, errp);
return;
}
while (getline(&line, &n, fp) != -1) {
ret = sscanf(line, "%*u %*u %u:%u %*s %n%*s%n%c",
&devmajor, &devminor, &dir_s, &dir_e, &check);
if (ret < 3) {
continue;
}
dash = strstr(line + dir_e, " - ");
if (!dash) {
continue;
}
ret = sscanf(dash, " - %n%*s%n %n%*s%n%c",
&type_s, &type_e, &dev_s, &dev_e, &check);
if (ret < 1) {
continue;
}
line[dir_e] = 0;
dash[type_e] = 0;
dash[dev_e] = 0;
decode_mntname(line + dir_s, dir_e - dir_s);
decode_mntname(dash + dev_s, dev_e - dev_s);
if (devmajor == 0) {
/* btrfs reports major number = 0 */
if (strcmp("btrfs", dash + type_s) != 0 ||
dev_major_minor(dash + dev_s, &devmajor, &devminor) < 0) {
continue;
}
}
mount = g_new0(FsMount, 1);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
mount->dirname = g_strdup(line + dir_s);
mount->devtype = g_strdup(dash + type_s);
mount->devmajor = devmajor;
mount->devminor = devminor;
QTAILQ_INSERT_TAIL(mounts, mount, next);
}
free(line);
fclose(fp);
}
#endif
#if defined(CONFIG_FSFREEZE)
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static char *get_pci_driver(char const *syspath, int pathlen, Error **errp)
{
char *path;
char *dpath;
char *driver = NULL;
char buf[PATH_MAX];
ssize_t len;
path = g_strndup(syspath, pathlen);
dpath = g_strdup_printf("%s/driver", path);
len = readlink(dpath, buf, sizeof(buf) - 1);
if (len != -1) {
buf[len] = 0;
driver = g_path_get_basename(buf);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
g_free(dpath);
g_free(path);
return driver;
}
static int compare_uint(const void *_a, const void *_b)
{
unsigned int a = *(unsigned int *)_a;
unsigned int b = *(unsigned int *)_b;
return a < b ? -1 : a > b ? 1 : 0;
}
/* Walk the specified sysfs and build a sorted list of host or ata numbers */
static int build_hosts(char const *syspath, char const *host, bool ata,
unsigned int *hosts, int hosts_max, Error **errp)
{
char *path;
DIR *dir;
struct dirent *entry;
int i = 0;
path = g_strndup(syspath, host - syspath);
dir = opendir(path);
if (!dir) {
error_setg_errno(errp, errno, "opendir(\"%s\")", path);
g_free(path);
return -1;
}
while (i < hosts_max) {
entry = readdir(dir);
if (!entry) {
break;
}
if (ata && sscanf(entry->d_name, "ata%d", hosts + i) == 1) {
++i;
} else if (!ata && sscanf(entry->d_name, "host%d", hosts + i) == 1) {
++i;
}
}
qsort(hosts, i, sizeof(hosts[0]), compare_uint);
g_free(path);
closedir(dir);
return i;
}
/*
* Store disk device info for devices on the PCI bus.
* Returns true if information has been stored, or false for failure.
*/
static bool build_guest_fsinfo_for_pci_dev(char const *syspath,
GuestDiskAddress *disk,
Error **errp)
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
{
unsigned int pci[4], host, hosts[8], tgt[3];
int i, nhosts = 0, pcilen;
GuestPCIAddress *pciaddr = disk->pci_controller;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
bool has_ata = false, has_host = false, has_tgt = false;
char *p, *q, *driver = NULL;
bool ret = false;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
p = strstr(syspath, "/devices/pci");
if (!p || sscanf(p + 12, "%*x:%*x/%x:%x:%x.%x%n",
pci, pci + 1, pci + 2, pci + 3, &pcilen) < 4) {
g_debug("only pci device is supported: sysfs path '%s'", syspath);
return false;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
p += 12 + pcilen;
while (true) {
driver = get_pci_driver(syspath, p - syspath, errp);
if (driver && (g_str_equal(driver, "ata_piix") ||
g_str_equal(driver, "sym53c8xx") ||
g_str_equal(driver, "virtio-pci") ||
g_str_equal(driver, "ahci"))) {
break;
}
g_free(driver);
if (sscanf(p, "/%x:%x:%x.%x%n",
pci, pci + 1, pci + 2, pci + 3, &pcilen) == 4) {
p += pcilen;
continue;
}
g_debug("unsupported driver or sysfs path '%s'", syspath);
return false;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
p = strstr(syspath, "/target");
if (p && sscanf(p + 7, "%*u:%*u:%*u/%*u:%u:%u:%u",
tgt, tgt + 1, tgt + 2) == 3) {
has_tgt = true;
}
p = strstr(syspath, "/ata");
if (p) {
q = p + 4;
has_ata = true;
} else {
p = strstr(syspath, "/host");
q = p + 5;
}
if (p && sscanf(q, "%u", &host) == 1) {
has_host = true;
nhosts = build_hosts(syspath, p, has_ata, hosts,
ARRAY_SIZE(hosts), errp);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (nhosts < 0) {
goto cleanup;
}
}
pciaddr->domain = pci[0];
pciaddr->bus = pci[1];
pciaddr->slot = pci[2];
pciaddr->function = pci[3];
if (strcmp(driver, "ata_piix") == 0) {
/* a host per ide bus, target*:0:<unit>:0 */
if (!has_host || !has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
for (i = 0; i < nhosts; i++) {
if (host == hosts[i]) {
disk->bus_type = GUEST_DISK_BUS_TYPE_IDE;
disk->bus = i;
disk->unit = tgt[1];
break;
}
}
if (i >= nhosts) {
g_debug("no host for '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
} else if (strcmp(driver, "sym53c8xx") == 0) {
/* scsi(LSI Logic): target*:0:<unit>:0 */
if (!has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
disk->bus_type = GUEST_DISK_BUS_TYPE_SCSI;
disk->unit = tgt[1];
} else if (strcmp(driver, "virtio-pci") == 0) {
if (has_tgt) {
/* virtio-scsi: target*:0:0:<unit> */
disk->bus_type = GUEST_DISK_BUS_TYPE_SCSI;
disk->unit = tgt[2];
} else {
/* virtio-blk: 1 disk per 1 device */
disk->bus_type = GUEST_DISK_BUS_TYPE_VIRTIO;
}
} else if (strcmp(driver, "ahci") == 0) {
/* ahci: 1 host per 1 unit */
if (!has_host || !has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
for (i = 0; i < nhosts; i++) {
if (host == hosts[i]) {
disk->unit = i;
disk->bus_type = GUEST_DISK_BUS_TYPE_SATA;
break;
}
}
if (i >= nhosts) {
g_debug("no host for '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
} else {
g_debug("unknown driver '%s' (sysfs path '%s')", driver, syspath);
goto cleanup;
}
ret = true;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
cleanup:
g_free(driver);
return ret;
}
/*
* Store disk device info for non-PCI virtio devices (for example s390x
* channel I/O devices). Returns true if information has been stored, or
* false for failure.
*/
static bool build_guest_fsinfo_for_nonpci_virtio(char const *syspath,
GuestDiskAddress *disk,
Error **errp)
{
unsigned int tgt[3];
char *p;
if (!strstr(syspath, "/virtio") || !strstr(syspath, "/block")) {
g_debug("Unsupported virtio device '%s'", syspath);
return false;
}
p = strstr(syspath, "/target");
if (p && sscanf(p + 7, "%*u:%*u:%*u/%*u:%u:%u:%u",
&tgt[0], &tgt[1], &tgt[2]) == 3) {
/* virtio-scsi: target*:0:<target>:<unit> */
disk->bus_type = GUEST_DISK_BUS_TYPE_SCSI;
disk->bus = tgt[0];
disk->target = tgt[1];
disk->unit = tgt[2];
} else {
/* virtio-blk: 1 disk per 1 device */
disk->bus_type = GUEST_DISK_BUS_TYPE_VIRTIO;
}
return true;
}
/*
* Store disk device info for CCW devices (s390x channel I/O devices).
* Returns true if information has been stored, or false for failure.
*/
static bool build_guest_fsinfo_for_ccw_dev(char const *syspath,
GuestDiskAddress *disk,
Error **errp)
{
unsigned int cssid, ssid, subchno, devno;
char *p;
p = strstr(syspath, "/devices/css");
if (!p || sscanf(p + 12, "%*x/%x.%x.%x/%*x.%*x.%x/",
&cssid, &ssid, &subchno, &devno) < 4) {
g_debug("could not parse ccw device sysfs path: %s", syspath);
return false;
}
disk->has_ccw_address = true;
disk->ccw_address = g_new0(GuestCCWAddress, 1);
disk->ccw_address->cssid = cssid;
disk->ccw_address->ssid = ssid;
disk->ccw_address->subchno = subchno;
disk->ccw_address->devno = devno;
if (strstr(p, "/virtio")) {
build_guest_fsinfo_for_nonpci_virtio(syspath, disk, errp);
}
return true;
}
/* Store disk device info specified by @sysfs into @fs */
static void build_guest_fsinfo_for_real_device(char const *syspath,
GuestFilesystemInfo *fs,
Error **errp)
{
GuestDiskAddress *disk;
GuestPCIAddress *pciaddr;
bool has_hwinf;
#ifdef CONFIG_LIBUDEV
struct udev *udev = NULL;
struct udev_device *udevice = NULL;
#endif
pciaddr = g_new0(GuestPCIAddress, 1);
pciaddr->domain = -1; /* -1 means field is invalid */
pciaddr->bus = -1;
pciaddr->slot = -1;
pciaddr->function = -1;
disk = g_new0(GuestDiskAddress, 1);
disk->pci_controller = pciaddr;
disk->bus_type = GUEST_DISK_BUS_TYPE_UNKNOWN;
#ifdef CONFIG_LIBUDEV
udev = udev_new();
udevice = udev_device_new_from_syspath(udev, syspath);
if (udev == NULL || udevice == NULL) {
g_debug("failed to query udev");
} else {
const char *devnode, *serial;
devnode = udev_device_get_devnode(udevice);
if (devnode != NULL) {
disk->dev = g_strdup(devnode);
disk->has_dev = true;
}
serial = udev_device_get_property_value(udevice, "ID_SERIAL");
if (serial != NULL && *serial != 0) {
disk->serial = g_strdup(serial);
disk->has_serial = true;
}
}
udev_unref(udev);
udev_device_unref(udevice);
#endif
if (strstr(syspath, "/devices/pci")) {
has_hwinf = build_guest_fsinfo_for_pci_dev(syspath, disk, errp);
} else if (strstr(syspath, "/devices/css")) {
has_hwinf = build_guest_fsinfo_for_ccw_dev(syspath, disk, errp);
} else if (strstr(syspath, "/virtio")) {
has_hwinf = build_guest_fsinfo_for_nonpci_virtio(syspath, disk, errp);
} else {
g_debug("Unsupported device type for '%s'", syspath);
has_hwinf = false;
}
if (has_hwinf || disk->has_dev || disk->has_serial) {
QAPI_LIST_PREPEND(fs->disk, disk);
} else {
qapi_free_GuestDiskAddress(disk);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
static void build_guest_fsinfo_for_device(char const *devpath,
GuestFilesystemInfo *fs,
Error **errp);
/* Store a list of slave devices of virtual volume specified by @syspath into
* @fs */
static void build_guest_fsinfo_for_virtual_device(char const *syspath,
GuestFilesystemInfo *fs,
Error **errp)
{
Error *err = NULL;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
DIR *dir;
char *dirpath;
struct dirent *entry;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
dirpath = g_strdup_printf("%s/slaves", syspath);
dir = opendir(dirpath);
if (!dir) {
if (errno != ENOENT) {
error_setg_errno(errp, errno, "opendir(\"%s\")", dirpath);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
g_free(dirpath);
return;
}
for (;;) {
errno = 0;
entry = readdir(dir);
if (entry == NULL) {
if (errno) {
error_setg_errno(errp, errno, "readdir(\"%s\")", dirpath);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
break;
}
if (entry->d_type == DT_LNK) {
char *path;
g_debug(" slave device '%s'", entry->d_name);
path = g_strdup_printf("%s/slaves/%s", syspath, entry->d_name);
build_guest_fsinfo_for_device(path, fs, &err);
g_free(path);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (err) {
error_propagate(errp, err);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
break;
}
}
}
g_free(dirpath);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
closedir(dir);
}
static bool is_disk_virtual(const char *devpath, Error **errp)
{
g_autofree char *syspath = realpath(devpath, NULL);
if (!syspath) {
error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
return false;
}
return strstr(syspath, "/devices/virtual/block/") != NULL;
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
/* Dispatch to functions for virtual/real device */
static void build_guest_fsinfo_for_device(char const *devpath,
GuestFilesystemInfo *fs,
Error **errp)
{
ERRP_GUARD();
g_autofree char *syspath = NULL;
bool is_virtual = false;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
syspath = realpath(devpath, NULL);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (!syspath) {
error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
return;
}
if (!fs->name) {
fs->name = g_path_get_basename(syspath);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
g_debug(" parse sysfs path '%s'", syspath);
is_virtual = is_disk_virtual(syspath, errp);
if (*errp != NULL) {
return;
}
if (is_virtual) {
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
build_guest_fsinfo_for_virtual_device(syspath, fs, errp);
} else {
build_guest_fsinfo_for_real_device(syspath, fs, errp);
}
}
#ifdef CONFIG_LIBUDEV
/*
* Wrapper around build_guest_fsinfo_for_device() for getting just
* the disk address.
*/
static GuestDiskAddress *get_disk_address(const char *syspath, Error **errp)
{
g_autoptr(GuestFilesystemInfo) fs = NULL;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
fs = g_new0(GuestFilesystemInfo, 1);
build_guest_fsinfo_for_device(syspath, fs, errp);
if (fs->disk != NULL) {
return g_steal_pointer(&fs->disk->value);
}
return NULL;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
}
static char *get_alias_for_syspath(const char *syspath)
{
struct udev *udev = NULL;
struct udev_device *udevice = NULL;
char *ret = NULL;
udev = udev_new();
if (udev == NULL) {
g_debug("failed to query udev");
goto out;
}
udevice = udev_device_new_from_syspath(udev, syspath);
if (udevice == NULL) {
g_debug("failed to query udev for path: %s", syspath);
goto out;
} else {
const char *alias = udev_device_get_property_value(
udevice, "DM_NAME");
/*
* NULL means there was an error and empty string means there is no
* alias. In case of no alias we return NULL instead of empty string.
*/
if (alias == NULL) {
g_debug("failed to query udev for device alias for: %s",
syspath);
} else if (*alias != 0) {
ret = g_strdup(alias);
}
}
out:
udev_unref(udev);
udev_device_unref(udevice);
return ret;
}
static char *get_device_for_syspath(const char *syspath)
{
struct udev *udev = NULL;
struct udev_device *udevice = NULL;
char *ret = NULL;
udev = udev_new();
if (udev == NULL) {
g_debug("failed to query udev");
goto out;
}
udevice = udev_device_new_from_syspath(udev, syspath);
if (udevice == NULL) {
g_debug("failed to query udev for path: %s", syspath);
goto out;
} else {
ret = g_strdup(udev_device_get_devnode(udevice));
}
out:
udev_unref(udev);
udev_device_unref(udevice);
return ret;
}
static void get_disk_deps(const char *disk_dir, GuestDiskInfo *disk)
{
g_autofree char *deps_dir = NULL;
const gchar *dep;
GDir *dp_deps = NULL;
/* List dependent disks */
deps_dir = g_strdup_printf("%s/slaves", disk_dir);
g_debug(" listing entries in: %s", deps_dir);
dp_deps = g_dir_open(deps_dir, 0, NULL);
if (dp_deps == NULL) {
g_debug("failed to list entries in %s", deps_dir);
return;
}
disk->has_dependencies = true;
while ((dep = g_dir_read_name(dp_deps)) != NULL) {
g_autofree char *dep_dir = NULL;
char *dev_name;
/* Add dependent disks */
dep_dir = g_strdup_printf("%s/%s", deps_dir, dep);
dev_name = get_device_for_syspath(dep_dir);
if (dev_name != NULL) {
g_debug(" adding dependent device: %s", dev_name);
QAPI_LIST_PREPEND(disk->dependencies, dev_name);
}
}
g_dir_close(dp_deps);
}
/*
* Detect partitions subdirectory, name is "<disk_name><number>" or
* "<disk_name>p<number>"
*
* @disk_name -- last component of /sys path (e.g. sda)
* @disk_dir -- sys path of the disk (e.g. /sys/block/sda)
* @disk_dev -- device node of the disk (e.g. /dev/sda)
*/
static GuestDiskInfoList *get_disk_partitions(
GuestDiskInfoList *list,
const char *disk_name, const char *disk_dir,
const char *disk_dev)
{
GuestDiskInfoList *ret = list;
struct dirent *de_disk;
DIR *dp_disk = NULL;
size_t len = strlen(disk_name);
dp_disk = opendir(disk_dir);
while ((de_disk = readdir(dp_disk)) != NULL) {
g_autofree char *partition_dir = NULL;
char *dev_name;
GuestDiskInfo *partition;
if (!(de_disk->d_type & DT_DIR)) {
continue;
}
if (!(strncmp(disk_name, de_disk->d_name, len) == 0 &&
((*(de_disk->d_name + len) == 'p' &&
isdigit(*(de_disk->d_name + len + 1))) ||
isdigit(*(de_disk->d_name + len))))) {
continue;
}
partition_dir = g_strdup_printf("%s/%s",
disk_dir, de_disk->d_name);
dev_name = get_device_for_syspath(partition_dir);
if (dev_name == NULL) {
g_debug("Failed to get device name for syspath: %s",
disk_dir);
continue;
}
partition = g_new0(GuestDiskInfo, 1);
partition->name = dev_name;
partition->partition = true;
partition->has_dependencies = true;
/* Add parent disk as dependent for easier tracking of hierarchy */
QAPI_LIST_PREPEND(partition->dependencies, g_strdup(disk_dev));
QAPI_LIST_PREPEND(ret, partition);
}
closedir(dp_disk);
return ret;
}
GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
{
GuestDiskInfoList *ret = NULL;
GuestDiskInfo *disk;
DIR *dp = NULL;
struct dirent *de = NULL;
g_debug("listing /sys/block directory");
dp = opendir("/sys/block");
if (dp == NULL) {
error_setg_errno(errp, errno, "Can't open directory \"/sys/block\"");
return NULL;
}
while ((de = readdir(dp)) != NULL) {
g_autofree char *disk_dir = NULL, *line = NULL,
*size_path = NULL;
char *dev_name;
Error *local_err = NULL;
if (de->d_type != DT_LNK) {
g_debug(" skipping entry: %s", de->d_name);
continue;
}
/* Check size and skip zero-sized disks */
g_debug(" checking disk size");
size_path = g_strdup_printf("/sys/block/%s/size", de->d_name);
if (!g_file_get_contents(size_path, &line, NULL, NULL)) {
g_debug(" failed to read disk size");
continue;
}
if (g_strcmp0(line, "0\n") == 0) {
g_debug(" skipping zero-sized disk");
continue;
}
g_debug(" adding %s", de->d_name);
disk_dir = g_strdup_printf("/sys/block/%s", de->d_name);
dev_name = get_device_for_syspath(disk_dir);
if (dev_name == NULL) {
g_debug("Failed to get device name for syspath: %s",
disk_dir);
continue;
}
disk = g_new0(GuestDiskInfo, 1);
disk->name = dev_name;
disk->partition = false;
disk->alias = get_alias_for_syspath(disk_dir);
disk->has_alias = (disk->alias != NULL);
QAPI_LIST_PREPEND(ret, disk);
/* Get address for non-virtual devices */
bool is_virtual = is_disk_virtual(disk_dir, &local_err);
if (local_err != NULL) {
g_debug(" failed to check disk path, ignoring error: %s",
error_get_pretty(local_err));
error_free(local_err);
local_err = NULL;
/* Don't try to get the address */
is_virtual = true;
}
if (!is_virtual) {
disk->address = get_disk_address(disk_dir, &local_err);
if (local_err != NULL) {
g_debug(" failed to get device info, ignoring error: %s",
error_get_pretty(local_err));
error_free(local_err);
local_err = NULL;
} else if (disk->address != NULL) {
disk->has_address = true;
}
}
get_disk_deps(disk_dir, disk);
ret = get_disk_partitions(ret, de->d_name, disk_dir, dev_name);
}
closedir(dp);
return ret;
}
#else
GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
#endif
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
/* Return a list of the disk device(s)' info which @mount lies on */
static GuestFilesystemInfo *build_guest_fsinfo(struct FsMount *mount,
Error **errp)
{
GuestFilesystemInfo *fs = g_malloc0(sizeof(*fs));
struct statvfs buf;
unsigned long used, nonroot_total, fr_size;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
char *devpath = g_strdup_printf("/sys/dev/block/%u:%u",
mount->devmajor, mount->devminor);
fs->mountpoint = g_strdup(mount->dirname);
fs->type = g_strdup(mount->devtype);
build_guest_fsinfo_for_device(devpath, fs, errp);
if (statvfs(fs->mountpoint, &buf) == 0) {
fr_size = buf.f_frsize;
used = buf.f_blocks - buf.f_bfree;
nonroot_total = used + buf.f_bavail;
fs->used_bytes = used * fr_size;
fs->total_bytes = nonroot_total * fr_size;
fs->has_total_bytes = true;
fs->has_used_bytes = true;
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
g_free(devpath);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
return fs;
}
GuestFilesystemInfoList *qmp_guest_get_fsinfo(Error **errp)
{
FsMountList mounts;
struct FsMount *mount;
GuestFilesystemInfoList *ret = NULL;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
Error *local_err = NULL;
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return NULL;
}
QTAILQ_FOREACH(mount, &mounts, next) {
g_debug("Building guest fsinfo for '%s'", mount->dirname);
QAPI_LIST_PREPEND(ret, build_guest_fsinfo(mount, &local_err));
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (local_err) {
error_propagate(errp, local_err);
qapi_free_GuestFilesystemInfoList(ret);
ret = NULL;
break;
}
}
free_fs_mount_list(&mounts);
return ret;
}
typedef enum {
FSFREEZE_HOOK_THAW = 0,
FSFREEZE_HOOK_FREEZE,
} FsfreezeHookArg;
static const char *fsfreeze_hook_arg_string[] = {
"thaw",
"freeze",
};
static void execute_fsfreeze_hook(FsfreezeHookArg arg, Error **errp)
{
int status;
pid_t pid;
const char *hook;
const char *arg_str = fsfreeze_hook_arg_string[arg];
Error *local_err = NULL;
hook = ga_fsfreeze_hook(ga_state);
if (!hook) {
return;
}
if (access(hook, X_OK) != 0) {
error_setg_errno(errp, errno, "can't access fsfreeze hook '%s'", hook);
return;
}
slog("executing fsfreeze hook with arg '%s'", arg_str);
pid = fork();
if (pid == 0) {
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
execle(hook, hook, arg_str, NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "fsfreeze hook has terminated abnormally");
return;
}
status = WEXITSTATUS(status);
if (status) {
error_setg(errp, "fsfreeze hook has failed with status %d", status);
return;
}
}
/*
* Return status of freeze/thaw
*/
GuestFsfreezeStatus qmp_guest_fsfreeze_status(Error **errp)
{
if (ga_is_frozen(ga_state)) {
return GUEST_FSFREEZE_STATUS_FROZEN;
}
return GUEST_FSFREEZE_STATUS_THAWED;
}
int64_t qmp_guest_fsfreeze_freeze(Error **errp)
{
return qmp_guest_fsfreeze_freeze_list(false, NULL, errp);
}
/*
* Walk list of mounted file systems in the guest, and freeze the ones which
* are real local file systems.
*/
int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints,
strList *mountpoints,
Error **errp)
{
int ret = 0, i = 0;
strList *list;
FsMountList mounts;
struct FsMount *mount;
Error *local_err = NULL;
int fd;
slog("guest-fsfreeze called");
execute_fsfreeze_hook(FSFREEZE_HOOK_FREEZE, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
/* cannot risk guest agent blocking itself on a write in this state */
ga_set_frozen(ga_state);
QTAILQ_FOREACH_REVERSE(mount, &mounts, next) {
/* To issue fsfreeze in the reverse order of mounts, check if the
* mount is listed in the list here */
if (has_mountpoints) {
for (list = mountpoints; list; list = list->next) {
if (strcmp(list->value, mount->dirname) == 0) {
break;
}
}
if (!list) {
continue;
}
}
fd = qemu_open_old(mount->dirname, O_RDONLY);
if (fd == -1) {
error_setg_errno(errp, errno, "failed to open %s", mount->dirname);
goto error;
}
/* we try to cull filesystems we know won't work in advance, but other
* filesystems may not implement fsfreeze for less obvious reasons.
* these will report EOPNOTSUPP. we simply ignore these when tallying
* the number of frozen filesystems.
* if a filesystem is mounted more than once (aka bind mount) a
* consecutive attempt to freeze an already frozen filesystem will
* return EBUSY.
*
* any other error means a failure to freeze a filesystem we
* expect to be freezable, so return an error in those cases
* and return system to thawed state.
*/
ret = ioctl(fd, FIFREEZE);
if (ret == -1) {
if (errno != EOPNOTSUPP && errno != EBUSY) {
error_setg_errno(errp, errno, "failed to freeze %s",
mount->dirname);
close(fd);
goto error;
}
} else {
i++;
}
close(fd);
}
free_fs_mount_list(&mounts);
/* We may not issue any FIFREEZE here.
* Just unset ga_state here and ready for the next call.
*/
if (i == 0) {
ga_unset_frozen(ga_state);
}
return i;
error:
free_fs_mount_list(&mounts);
qmp_guest_fsfreeze_thaw(NULL);
return 0;
}
/*
* Walk list of frozen file systems in the guest, and thaw them.
*/
int64_t qmp_guest_fsfreeze_thaw(Error **errp)
{
int ret;
FsMountList mounts;
FsMount *mount;
int fd, i = 0, logged;
Error *local_err = NULL;
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return 0;
}
QTAILQ_FOREACH(mount, &mounts, next) {
logged = false;
fd = qemu_open_old(mount->dirname, O_RDONLY);
if (fd == -1) {
continue;
}
/* we have no way of knowing whether a filesystem was actually unfrozen
* as a result of a successful call to FITHAW, only that if an error
* was returned the filesystem was *not* unfrozen by that particular
* call.
*
* since multiple preceding FIFREEZEs require multiple calls to FITHAW
* to unfreeze, continuing issuing FITHAW until an error is returned,
* in which case either the filesystem is in an unfreezable state, or,
* more likely, it was thawed previously (and remains so afterward).
*
* also, since the most recent successful call is the one that did
* the actual unfreeze, we can use this to provide an accurate count
* of the number of filesystems unfrozen by guest-fsfreeze-thaw, which
* may * be useful for determining whether a filesystem was unfrozen
* during the freeze/thaw phase by a process other than qemu-ga.
*/
do {
ret = ioctl(fd, FITHAW);
if (ret == 0 && !logged) {
i++;
logged = true;
}
} while (ret == 0);
close(fd);
}
ga_unset_frozen(ga_state);
free_fs_mount_list(&mounts);
execute_fsfreeze_hook(FSFREEZE_HOOK_THAW, errp);
return i;
}
static void guest_fsfreeze_cleanup(void)
{
Error *err = NULL;
if (ga_is_frozen(ga_state) == GUEST_FSFREEZE_STATUS_FROZEN) {
qmp_guest_fsfreeze_thaw(&err);
if (err) {
slog("failed to clean up frozen filesystems: %s",
error_get_pretty(err));
error_free(err);
}
}
}
#endif /* CONFIG_FSFREEZE */
#if defined(CONFIG_FSTRIM)
/*
* Walk list of mounted file systems in the guest, and trim them.
*/
GuestFilesystemTrimResponse *
qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
{
GuestFilesystemTrimResponse *response;
GuestFilesystemTrimResult *result;
int ret = 0;
FsMountList mounts;
struct FsMount *mount;
int fd;
Error *local_err = NULL;
struct fstrim_range r;
slog("guest-fstrim called");
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return NULL;
}
response = g_malloc0(sizeof(*response));
QTAILQ_FOREACH(mount, &mounts, next) {
result = g_malloc0(sizeof(*result));
result->path = g_strdup(mount->dirname);
QAPI_LIST_PREPEND(response->paths, result);
fd = qemu_open_old(mount->dirname, O_RDONLY);
if (fd == -1) {
result->error = g_strdup_printf("failed to open: %s",
strerror(errno));
result->has_error = true;
continue;
}
/* We try to cull filesystems we know won't work in advance, but other
* filesystems may not implement fstrim for less obvious reasons.
* These will report EOPNOTSUPP; while in some other cases ENOTTY
* will be reported (e.g. CD-ROMs).
* Any other error means an unexpected error.
*/
r.start = 0;
r.len = -1;
r.minlen = has_minimum ? minimum : 0;
ret = ioctl(fd, FITRIM, &r);
if (ret == -1) {
result->has_error = true;
if (errno == ENOTTY || errno == EOPNOTSUPP) {
result->error = g_strdup("trim not supported");
} else {
result->error = g_strdup_printf("failed to trim: %s",
strerror(errno));
}
close(fd);
continue;
}
result->has_minimum = true;
result->minimum = r.minlen;
result->has_trimmed = true;
result->trimmed = r.len;
close(fd);
}
free_fs_mount_list(&mounts);
return response;
}
#endif /* CONFIG_FSTRIM */
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
#define LINUX_SYS_STATE_FILE "/sys/power/state"
#define SUSPEND_SUPPORTED 0
#define SUSPEND_NOT_SUPPORTED 1
typedef enum {
SUSPEND_MODE_DISK = 0,
SUSPEND_MODE_RAM = 1,
SUSPEND_MODE_HYBRID = 2,
} SuspendMode;
/*
* Executes a command in a child process using g_spawn_sync,
* returning an int >= 0 representing the exit status of the
* process.
*
* If the program wasn't found in path, returns -1.
*
* If a problem happened when creating the child process,
* returns -1 and errp is set.
*/
static int run_process_child(const char *command[], Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
int exit_status, spawn_flag;
GError *g_err = NULL;
bool success;
spawn_flag = G_SPAWN_SEARCH_PATH | G_SPAWN_STDOUT_TO_DEV_NULL |
G_SPAWN_STDERR_TO_DEV_NULL;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
success = g_spawn_sync(NULL, (char **)command, environ, spawn_flag,
NULL, NULL, NULL, NULL,
&exit_status, &g_err);
if (success) {
return WEXITSTATUS(exit_status);
}
if (g_err && (g_err->code != G_SPAWN_ERROR_NOENT)) {
error_setg(errp, "failed to create child process, error '%s'",
g_err->message);
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
g_error_free(g_err);
return -1;
}
static bool systemd_supports_mode(SuspendMode mode, Error **errp)
{
const char *systemctl_args[3] = {"systemd-hibernate", "systemd-suspend",
"systemd-hybrid-sleep"};
const char *cmd[4] = {"systemctl", "status", systemctl_args[mode], NULL};
int status;
status = run_process_child(cmd, errp);
/*
* systemctl status uses LSB return codes so we can expect
* status > 0 and be ok. To assert if the guest has support
* for the selected suspend mode, status should be < 4. 4 is
* the code for unknown service status, the return value when
* the service does not exist. A common value is status = 3
* (program is not running).
*/
if (status > 0 && status < 4) {
return true;
}
return false;
}
static void systemd_suspend(SuspendMode mode, Error **errp)
{
Error *local_err = NULL;
const char *systemctl_args[3] = {"hibernate", "suspend", "hybrid-sleep"};
const char *cmd[3] = {"systemctl", systemctl_args[mode], NULL};
int status;
status = run_process_child(cmd, &local_err);
if (status == 0) {
return;
}
if ((status == -1) && !local_err) {
error_setg(errp, "the helper program 'systemctl %s' was not found",
systemctl_args[mode]);
return;
}
if (local_err) {
error_propagate(errp, local_err);
} else {
error_setg(errp, "the helper program 'systemctl %s' returned an "
"unexpected exit status code (%d)",
systemctl_args[mode], status);
}
}
static bool pmutils_supports_mode(SuspendMode mode, Error **errp)
{
Error *local_err = NULL;
const char *pmutils_args[3] = {"--hibernate", "--suspend",
"--suspend-hybrid"};
const char *cmd[3] = {"pm-is-supported", pmutils_args[mode], NULL};
int status;
status = run_process_child(cmd, &local_err);
if (status == SUSPEND_SUPPORTED) {
return true;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
if ((status == -1) && !local_err) {
return false;
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (local_err) {
error_propagate(errp, local_err);
} else {
error_setg(errp,
"the helper program '%s' returned an unexpected exit"
" status code (%d)", "pm-is-supported", status);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
return false;
}
static void pmutils_suspend(SuspendMode mode, Error **errp)
{
Error *local_err = NULL;
const char *pmutils_binaries[3] = {"pm-hibernate", "pm-suspend",
"pm-suspend-hybrid"};
const char *cmd[2] = {pmutils_binaries[mode], NULL};
int status;
status = run_process_child(cmd, &local_err);
if (status == 0) {
return;
}
if ((status == -1) && !local_err) {
error_setg(errp, "the helper program '%s' was not found",
pmutils_binaries[mode]);
return;
}
if (local_err) {
error_propagate(errp, local_err);
} else {
error_setg(errp,
"the helper program '%s' returned an unexpected exit"
" status code (%d)", pmutils_binaries[mode], status);
}
}
static bool linux_sys_state_supports_mode(SuspendMode mode, Error **errp)
{
const char *sysfile_strs[3] = {"disk", "mem", NULL};
const char *sysfile_str = sysfile_strs[mode];
char buf[32]; /* hopefully big enough */
int fd;
ssize_t ret;
if (!sysfile_str) {
error_setg(errp, "unknown guest suspend mode");
return false;
}
fd = open(LINUX_SYS_STATE_FILE, O_RDONLY);
if (fd < 0) {
return false;
}
ret = read(fd, buf, sizeof(buf) - 1);
close(fd);
if (ret <= 0) {
return false;
}
buf[ret] = '\0';
if (strstr(buf, sysfile_str)) {
return true;
}
return false;
}
static void linux_sys_state_suspend(SuspendMode mode, Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
Error *local_err = NULL;
const char *sysfile_strs[3] = {"disk", "mem", NULL};
const char *sysfile_str = sysfile_strs[mode];
pid_t pid;
int status;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (!sysfile_str) {
error_setg(errp, "unknown guest suspend mode");
return;
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
pid = fork();
if (!pid) {
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
/* child */
int fd;
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
fd = open(LINUX_SYS_STATE_FILE, O_WRONLY);
if (fd < 0) {
_exit(EXIT_FAILURE);
}
if (write(fd, sysfile_str, strlen(sysfile_str)) < 0) {
_exit(EXIT_FAILURE);
}
_exit(EXIT_SUCCESS);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "child process has failed to suspend");
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
}
static void guest_suspend(SuspendMode mode, Error **errp)
{
Error *local_err = NULL;
bool mode_supported = false;
if (systemd_supports_mode(mode, &local_err)) {
mode_supported = true;
systemd_suspend(mode, &local_err);
}
if (!local_err) {
return;
}
error_free(local_err);
local_err = NULL;
if (pmutils_supports_mode(mode, &local_err)) {
mode_supported = true;
pmutils_suspend(mode, &local_err);
}
if (!local_err) {
return;
}
error_free(local_err);
local_err = NULL;
if (linux_sys_state_supports_mode(mode, &local_err)) {
mode_supported = true;
linux_sys_state_suspend(mode, &local_err);
}
if (!mode_supported) {
error_free(local_err);
error_setg(errp,
"the requested suspend mode is not supported by the guest");
} else {
error_propagate(errp, local_err);
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
void qmp_guest_suspend_disk(Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
guest_suspend(SUSPEND_MODE_DISK, errp);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
void qmp_guest_suspend_ram(Error **errp)
{
guest_suspend(SUSPEND_MODE_RAM, errp);
}
void qmp_guest_suspend_hybrid(Error **errp)
{
guest_suspend(SUSPEND_MODE_HYBRID, errp);
}
static GuestNetworkInterface *
guest_find_interface(GuestNetworkInterfaceList *head,
const char *name)
{
for (; head; head = head->next) {
if (strcmp(head->value->name, name) == 0) {
return head->value;
}
}
return NULL;
}
static int guest_get_network_stats(const char *name,
GuestNetworkInterfaceStat *stats)
{
int name_len;
char const *devinfo = "/proc/net/dev";
FILE *fp;
char *line = NULL, *colon;
size_t n = 0;
fp = fopen(devinfo, "r");
if (!fp) {
return -1;
}
name_len = strlen(name);
while (getline(&line, &n, fp) != -1) {
long long dummy;
long long rx_bytes;
long long rx_packets;
long long rx_errs;
long long rx_dropped;
long long tx_bytes;
long long tx_packets;
long long tx_errs;
long long tx_dropped;
char *trim_line;
trim_line = g_strchug(line);
if (trim_line[0] == '\0') {
continue;
}
colon = strchr(trim_line, ':');
if (!colon) {
continue;
}
if (colon - name_len == trim_line &&
strncmp(trim_line, name, name_len) == 0) {
if (sscanf(colon + 1,
"%lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld",
&rx_bytes, &rx_packets, &rx_errs, &rx_dropped,
&dummy, &dummy, &dummy, &dummy,
&tx_bytes, &tx_packets, &tx_errs, &tx_dropped,
&dummy, &dummy, &dummy, &dummy) != 16) {
continue;
}
stats->rx_bytes = rx_bytes;
stats->rx_packets = rx_packets;
stats->rx_errs = rx_errs;
stats->rx_dropped = rx_dropped;
stats->tx_bytes = tx_bytes;
stats->tx_packets = tx_packets;
stats->tx_errs = tx_errs;
stats->tx_dropped = tx_dropped;
fclose(fp);
g_free(line);
return 0;
}
}
fclose(fp);
g_free(line);
g_debug("/proc/net/dev: Interface '%s' not found", name);
return -1;
}
/*
* Build information about guest interfaces
*/
GuestNetworkInterfaceList *qmp_guest_network_get_interfaces(Error **errp)
{
GuestNetworkInterfaceList *head = NULL, **tail = &head;
struct ifaddrs *ifap, *ifa;
if (getifaddrs(&ifap) < 0) {
error_setg_errno(errp, errno, "getifaddrs failed");
goto error;
}
for (ifa = ifap; ifa; ifa = ifa->ifa_next) {
GuestNetworkInterface *info;
GuestIpAddressList **address_tail;
GuestIpAddress *address_item = NULL;
GuestNetworkInterfaceStat *interface_stat = NULL;
char addr4[INET_ADDRSTRLEN];
char addr6[INET6_ADDRSTRLEN];
int sock;
struct ifreq ifr;
unsigned char *mac_addr;
void *p;
g_debug("Processing %s interface", ifa->ifa_name);
info = guest_find_interface(head, ifa->ifa_name);
if (!info) {
info = g_malloc0(sizeof(*info));
info->name = g_strdup(ifa->ifa_name);
QAPI_LIST_APPEND(tail, info);
}
if (!info->has_hardware_address && ifa->ifa_flags & SIOCGIFHWADDR) {
/* we haven't obtained HW address yet */
sock = socket(PF_INET, SOCK_STREAM, 0);
if (sock == -1) {
error_setg_errno(errp, errno, "failed to create socket");
goto error;
}
memset(&ifr, 0, sizeof(ifr));
pstrcpy(ifr.ifr_name, IF_NAMESIZE, info->name);
if (ioctl(sock, SIOCGIFHWADDR, &ifr) == -1) {
error_setg_errno(errp, errno,
"failed to get MAC address of %s",
ifa->ifa_name);
close(sock);
goto error;
}
close(sock);
mac_addr = (unsigned char *) &ifr.ifr_hwaddr.sa_data;
info->hardware_address =
g_strdup_printf("%02x:%02x:%02x:%02x:%02x:%02x",
(int) mac_addr[0], (int) mac_addr[1],
(int) mac_addr[2], (int) mac_addr[3],
(int) mac_addr[4], (int) mac_addr[5]);
info->has_hardware_address = true;
}
if (ifa->ifa_addr &&
ifa->ifa_addr->sa_family == AF_INET) {
/* interface with IPv4 address */
p = &((struct sockaddr_in *)ifa->ifa_addr)->sin_addr;
if (!inet_ntop(AF_INET, p, addr4, sizeof(addr4))) {
error_setg_errno(errp, errno, "inet_ntop failed");
goto error;
}
address_item = g_malloc0(sizeof(*address_item));
address_item->ip_address = g_strdup(addr4);
address_item->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV4;
if (ifa->ifa_netmask) {
/* Count the number of set bits in netmask.
* This is safe as '1' and '0' cannot be shuffled in netmask. */
p = &((struct sockaddr_in *)ifa->ifa_netmask)->sin_addr;
address_item->prefix = ctpop32(((uint32_t *) p)[0]);
}
} else if (ifa->ifa_addr &&
ifa->ifa_addr->sa_family == AF_INET6) {
/* interface with IPv6 address */
p = &((struct sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
if (!inet_ntop(AF_INET6, p, addr6, sizeof(addr6))) {
error_setg_errno(errp, errno, "inet_ntop failed");
goto error;
}
address_item = g_malloc0(sizeof(*address_item));
address_item->ip_address = g_strdup(addr6);
address_item->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV6;
if (ifa->ifa_netmask) {
/* Count the number of set bits in netmask.
* This is safe as '1' and '0' cannot be shuffled in netmask. */
p = &((struct sockaddr_in6 *)ifa->ifa_netmask)->sin6_addr;
address_item->prefix =
ctpop32(((uint32_t *) p)[0]) +
ctpop32(((uint32_t *) p)[1]) +
ctpop32(((uint32_t *) p)[2]) +
ctpop32(((uint32_t *) p)[3]);
}
}
if (!address_item) {
continue;
}
address_tail = &info->ip_addresses;
while (*address_tail) {
address_tail = &(*address_tail)->next;
}
QAPI_LIST_APPEND(address_tail, address_item);
info->has_ip_addresses = true;
if (!info->has_statistics) {
interface_stat = g_malloc0(sizeof(*interface_stat));
if (guest_get_network_stats(info->name, interface_stat) == -1) {
info->has_statistics = false;
g_free(interface_stat);
} else {
info->statistics = interface_stat;
info->has_statistics = true;
}
}
}
freeifaddrs(ifap);
return head;
error:
freeifaddrs(ifap);
qapi_free_GuestNetworkInterfaceList(head);
return NULL;
}
/* Transfer online/offline status between @vcpu and the guest system.
*
* On input either @errp or *@errp must be NULL.
*
* In system-to-@vcpu direction, the following @vcpu fields are accessed:
* - R: vcpu->logical_id
* - W: vcpu->online
* - W: vcpu->can_offline
*
* In @vcpu-to-system direction, the following @vcpu fields are accessed:
* - R: vcpu->logical_id
* - R: vcpu->online
*
* Written members remain unmodified on error.
*/
static void transfer_vcpu(GuestLogicalProcessor *vcpu, bool sys2vcpu,
char *dirpath, Error **errp)
{
int fd;
int res;
int dirfd;
static const char fn[] = "online";
dirfd = open(dirpath, O_RDONLY | O_DIRECTORY);
if (dirfd == -1) {
error_setg_errno(errp, errno, "open(\"%s\")", dirpath);
return;
}
fd = openat(dirfd, fn, sys2vcpu ? O_RDONLY : O_RDWR);
if (fd == -1) {
if (errno != ENOENT) {
error_setg_errno(errp, errno, "open(\"%s/%s\")", dirpath, fn);
} else if (sys2vcpu) {
vcpu->online = true;
vcpu->can_offline = false;
} else if (!vcpu->online) {
error_setg(errp, "logical processor #%" PRId64 " can't be "
"offlined", vcpu->logical_id);
} /* otherwise pretend successful re-onlining */
} else {
unsigned char status;
res = pread(fd, &status, 1, 0);
if (res == -1) {
error_setg_errno(errp, errno, "pread(\"%s/%s\")", dirpath, fn);
} else if (res == 0) {
error_setg(errp, "pread(\"%s/%s\"): unexpected EOF", dirpath,
fn);
} else if (sys2vcpu) {
vcpu->online = (status != '0');
vcpu->can_offline = true;
} else if (vcpu->online != (status != '0')) {
status = '0' + vcpu->online;
if (pwrite(fd, &status, 1, 0) == -1) {
error_setg_errno(errp, errno, "pwrite(\"%s/%s\")", dirpath,
fn);
}
} /* otherwise pretend successful re-(on|off)-lining */
res = close(fd);
g_assert(res == 0);
}
res = close(dirfd);
g_assert(res == 0);
}
GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp)
{
GuestLogicalProcessorList *head, **tail;
qga: Correct loop count in qmp_guest_get_vcpus() The guest-get-vcpus returns incorrect vcpu info in case we hotunplug vcpus(not the last one). e.g.: A VM has 4 VCPUs: cpu0 + 3 hotunpluggable online vcpus(cpu1, cpu2 and cpu3). Hotunplug cpu2, Now only cpu0, cpu1 and cpu3 are present & online. ./qmp-shell /tmp/qmp-monitor.sock (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu2", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} (QEMU) device_del id=cpu2 {"return": {}} (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} Before: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}]} After: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}, {"online": true, "can-offline": true, "logical-id": 3}]} Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> *fix build breakage by using PRId64 for sscanf Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-02-24 06:14:28 +01:00
const char *cpu_dir = "/sys/devices/system/cpu";
const gchar *line;
g_autoptr(GDir) cpu_gdir = NULL;
Error *local_err = NULL;
head = NULL;
tail = &head;
qga: Correct loop count in qmp_guest_get_vcpus() The guest-get-vcpus returns incorrect vcpu info in case we hotunplug vcpus(not the last one). e.g.: A VM has 4 VCPUs: cpu0 + 3 hotunpluggable online vcpus(cpu1, cpu2 and cpu3). Hotunplug cpu2, Now only cpu0, cpu1 and cpu3 are present & online. ./qmp-shell /tmp/qmp-monitor.sock (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu2", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} (QEMU) device_del id=cpu2 {"return": {}} (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} Before: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}]} After: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}, {"online": true, "can-offline": true, "logical-id": 3}]} Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> *fix build breakage by using PRId64 for sscanf Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-02-24 06:14:28 +01:00
cpu_gdir = g_dir_open(cpu_dir, 0, NULL);
qga: Correct loop count in qmp_guest_get_vcpus() The guest-get-vcpus returns incorrect vcpu info in case we hotunplug vcpus(not the last one). e.g.: A VM has 4 VCPUs: cpu0 + 3 hotunpluggable online vcpus(cpu1, cpu2 and cpu3). Hotunplug cpu2, Now only cpu0, cpu1 and cpu3 are present & online. ./qmp-shell /tmp/qmp-monitor.sock (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu2", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} (QEMU) device_del id=cpu2 {"return": {}} (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} Before: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}]} After: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}, {"online": true, "can-offline": true, "logical-id": 3}]} Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> *fix build breakage by using PRId64 for sscanf Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-02-24 06:14:28 +01:00
if (cpu_gdir == NULL) {
error_setg_errno(errp, errno, "failed to list entries: %s", cpu_dir);
return NULL;
}
qga: Correct loop count in qmp_guest_get_vcpus() The guest-get-vcpus returns incorrect vcpu info in case we hotunplug vcpus(not the last one). e.g.: A VM has 4 VCPUs: cpu0 + 3 hotunpluggable online vcpus(cpu1, cpu2 and cpu3). Hotunplug cpu2, Now only cpu0, cpu1 and cpu3 are present & online. ./qmp-shell /tmp/qmp-monitor.sock (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu2", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} (QEMU) device_del id=cpu2 {"return": {}} (QEMU) query-hotpluggable-cpus {"return": [ {"props": {"core-id": 0, "thread-id": 0, "socket-id": 3}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu3", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 2}, "vcpus-count": 1, "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 1}, "vcpus-count": 1, "qom-path": "/machine/peripheral/cpu1", "type": "host-x86_64-cpu"}, {"props": {"core-id": 0, "thread-id": 0, "socket-id": 0}, "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]", "type": "host-x86_64-cpu"} ]} Before: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}]} After: ./qmp-shell -N /tmp/qmp-ga.sock Welcome to the QMP low-level shell! Connected (QEMU) guest-get-vcpus {"return": [ {"online": true, "can-offline": false, "logical-id": 0}, {"online": true, "can-offline": true, "logical-id": 1}, {"online": true, "can-offline": true, "logical-id": 3}]} Signed-off-by: Lin Ma <lma@suse.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> *fix build breakage by using PRId64 for sscanf Signed-off-by: Michael Roth <michael.roth@amd.com>
2021-02-24 06:14:28 +01:00
while (local_err == NULL && (line = g_dir_read_name(cpu_gdir)) != NULL) {
GuestLogicalProcessor *vcpu;
int64_t id;
if (sscanf(line, "cpu%" PRId64, &id)) {
g_autofree char *path = g_strdup_printf("/sys/devices/system/cpu/"
"cpu%" PRId64 "/", id);
vcpu = g_malloc0(sizeof *vcpu);
vcpu->logical_id = id;
vcpu->has_can_offline = true; /* lolspeak ftw */
transfer_vcpu(vcpu, true, path, &local_err);
QAPI_LIST_APPEND(tail, vcpu);
}
}
if (local_err == NULL) {
/* there's no guest with zero VCPUs */
g_assert(head != NULL);
return head;
}
qapi_free_GuestLogicalProcessorList(head);
error_propagate(errp, local_err);
return NULL;
}
int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
{
int64_t processed;
Error *local_err = NULL;
processed = 0;
while (vcpus != NULL) {
char *path = g_strdup_printf("/sys/devices/system/cpu/cpu%" PRId64 "/",
vcpus->value->logical_id);
transfer_vcpu(vcpus->value, false, path, &local_err);
g_free(path);
if (local_err != NULL) {
break;
}
++processed;
vcpus = vcpus->next;
}
if (local_err != NULL) {
if (processed == 0) {
error_propagate(errp, local_err);
} else {
error_free(local_err);
}
}
return processed;
}
qga: add guest-set-user-password command Add a new 'guest-set-user-password' command for changing the password of guest OS user accounts. This command is needed to enable OpenStack to support its API for changing the admin password of guests running on KVM/QEMU. It is not practical to provide a command at the QEMU level explicitly targetting administrator account password change only, since different guest OS have different names for the admin account. While UNIX systems use 'root', Windows systems typically use 'Administrator' and even that can be renamed. Higher level apps like OpenStack have the ability to figure out the correct admin account name since they have info that QEMU/libvirt do not. The command accepts either the clear text password string, encoded in base64 to make it 8-bit safe in JSON: $ echo -n "123456" | base64 MTIzNDU2 $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": false, "username": "root", "password": "MTIzNDU2" } }' {"return":{}} Or a password that has already been run though a crypt(3) like algorithm appropriate for the guest, again then base64 encoded: $ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64 JDYkb...snip...YT2Ey $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": true, "username": "root", "password": "JDYkb...snip...YT2Ey" } }' NB windows support is desirable, but not implemented in this patch. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-02-11 12:26:12 +01:00
void qmp_guest_set_user_password(const char *username,
const char *password,
bool crypted,
Error **errp)
{
Error *local_err = NULL;
char *passwd_path = NULL;
pid_t pid;
int status;
int datafd[2] = { -1, -1 };
char *rawpasswddata = NULL;
size_t rawpasswdlen;
char *chpasswddata = NULL;
size_t chpasswdlen;
rawpasswddata = (char *)qbase64_decode(password, -1, &rawpasswdlen, errp);
if (!rawpasswddata) {
return;
}
qga: add guest-set-user-password command Add a new 'guest-set-user-password' command for changing the password of guest OS user accounts. This command is needed to enable OpenStack to support its API for changing the admin password of guests running on KVM/QEMU. It is not practical to provide a command at the QEMU level explicitly targetting administrator account password change only, since different guest OS have different names for the admin account. While UNIX systems use 'root', Windows systems typically use 'Administrator' and even that can be renamed. Higher level apps like OpenStack have the ability to figure out the correct admin account name since they have info that QEMU/libvirt do not. The command accepts either the clear text password string, encoded in base64 to make it 8-bit safe in JSON: $ echo -n "123456" | base64 MTIzNDU2 $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": false, "username": "root", "password": "MTIzNDU2" } }' {"return":{}} Or a password that has already been run though a crypt(3) like algorithm appropriate for the guest, again then base64 encoded: $ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64 JDYkb...snip...YT2Ey $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": true, "username": "root", "password": "JDYkb...snip...YT2Ey" } }' NB windows support is desirable, but not implemented in this patch. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-02-11 12:26:12 +01:00
rawpasswddata = g_renew(char, rawpasswddata, rawpasswdlen + 1);
rawpasswddata[rawpasswdlen] = '\0';
if (strchr(rawpasswddata, '\n')) {
error_setg(errp, "forbidden characters in raw password");
goto out;
}
if (strchr(username, '\n') ||
strchr(username, ':')) {
error_setg(errp, "forbidden characters in username");
goto out;
}
chpasswddata = g_strdup_printf("%s:%s\n", username, rawpasswddata);
chpasswdlen = strlen(chpasswddata);
passwd_path = g_find_program_in_path("chpasswd");
if (!passwd_path) {
error_setg(errp, "cannot find 'passwd' program in PATH");
goto out;
}
if (pipe(datafd) < 0) {
error_setg(errp, "cannot create pipe FDs");
goto out;
}
pid = fork();
if (pid == 0) {
close(datafd[1]);
/* child */
setsid();
dup2(datafd[0], 0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
if (crypted) {
execle(passwd_path, "chpasswd", "-e", NULL, environ);
} else {
execle(passwd_path, "chpasswd", NULL, environ);
}
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
goto out;
}
close(datafd[0]);
datafd[0] = -1;
if (qemu_write_full(datafd[1], chpasswddata, chpasswdlen) != chpasswdlen) {
error_setg_errno(errp, errno, "cannot write new account password");
goto out;
}
close(datafd[1]);
datafd[1] = -1;
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto out;
}
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
goto out;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "child process has failed to set user password");
goto out;
}
out:
g_free(chpasswddata);
g_free(rawpasswddata);
g_free(passwd_path);
if (datafd[0] != -1) {
close(datafd[0]);
}
if (datafd[1] != -1) {
close(datafd[1]);
}
}
static void ga_read_sysfs_file(int dirfd, const char *pathname, char *buf,
int size, Error **errp)
{
int fd;
int res;
errno = 0;
fd = openat(dirfd, pathname, O_RDONLY);
if (fd == -1) {
error_setg_errno(errp, errno, "open sysfs file \"%s\"", pathname);
return;
}
res = pread(fd, buf, size, 0);
if (res == -1) {
error_setg_errno(errp, errno, "pread sysfs file \"%s\"", pathname);
} else if (res == 0) {
error_setg(errp, "pread sysfs file \"%s\": unexpected EOF", pathname);
}
close(fd);
}
static void ga_write_sysfs_file(int dirfd, const char *pathname,
const char *buf, int size, Error **errp)
{
int fd;
errno = 0;
fd = openat(dirfd, pathname, O_WRONLY);
if (fd == -1) {
error_setg_errno(errp, errno, "open sysfs file \"%s\"", pathname);
return;
}
if (pwrite(fd, buf, size, 0) == -1) {
error_setg_errno(errp, errno, "pwrite sysfs file \"%s\"", pathname);
}
close(fd);
}
/* Transfer online/offline status between @mem_blk and the guest system.
*
* On input either @errp or *@errp must be NULL.
*
* In system-to-@mem_blk direction, the following @mem_blk fields are accessed:
* - R: mem_blk->phys_index
* - W: mem_blk->online
* - W: mem_blk->can_offline
*
* In @mem_blk-to-system direction, the following @mem_blk fields are accessed:
* - R: mem_blk->phys_index
* - R: mem_blk->online
*- R: mem_blk->can_offline
* Written members remain unmodified on error.
*/
static void transfer_memory_block(GuestMemoryBlock *mem_blk, bool sys2memblk,
GuestMemoryBlockResponse *result,
Error **errp)
{
char *dirpath;
int dirfd;
char *status;
Error *local_err = NULL;
if (!sys2memblk) {
DIR *dp;
if (!result) {
error_setg(errp, "Internal error, 'result' should not be NULL");
return;
}
errno = 0;
dp = opendir("/sys/devices/system/memory/");
/* if there is no 'memory' directory in sysfs,
* we think this VM does not support online/offline memory block,
* any other solution?
*/
if (!dp) {
if (errno == ENOENT) {
result->response =
GUEST_MEMORY_BLOCK_RESPONSE_TYPE_OPERATION_NOT_SUPPORTED;
}
goto out1;
}
closedir(dp);
}
dirpath = g_strdup_printf("/sys/devices/system/memory/memory%" PRId64 "/",
mem_blk->phys_index);
dirfd = open(dirpath, O_RDONLY | O_DIRECTORY);
if (dirfd == -1) {
if (sys2memblk) {
error_setg_errno(errp, errno, "open(\"%s\")", dirpath);
} else {
if (errno == ENOENT) {
result->response = GUEST_MEMORY_BLOCK_RESPONSE_TYPE_NOT_FOUND;
} else {
result->response =
GUEST_MEMORY_BLOCK_RESPONSE_TYPE_OPERATION_FAILED;
}
}
g_free(dirpath);
goto out1;
}
g_free(dirpath);
status = g_malloc0(10);
ga_read_sysfs_file(dirfd, "state", status, 10, &local_err);
if (local_err) {
/* treat with sysfs file that not exist in old kernel */
if (errno == ENOENT) {
error_free(local_err);
if (sys2memblk) {
mem_blk->online = true;
mem_blk->can_offline = false;
} else if (!mem_blk->online) {
result->response =
GUEST_MEMORY_BLOCK_RESPONSE_TYPE_OPERATION_NOT_SUPPORTED;
}
} else {
if (sys2memblk) {
error_propagate(errp, local_err);
} else {
error_free(local_err);
result->response =
GUEST_MEMORY_BLOCK_RESPONSE_TYPE_OPERATION_FAILED;
}
}
goto out2;
}
if (sys2memblk) {
char removable = '0';
mem_blk->online = (strncmp(status, "online", 6) == 0);
ga_read_sysfs_file(dirfd, "removable", &removable, 1, &local_err);
if (local_err) {
/* if no 'removable' file, it doesn't support offline mem blk */
if (errno == ENOENT) {
error_free(local_err);
mem_blk->can_offline = false;
} else {
error_propagate(errp, local_err);
}
} else {
mem_blk->can_offline = (removable != '0');
}
} else {
if (mem_blk->online != (strncmp(status, "online", 6) == 0)) {
const char *new_state = mem_blk->online ? "online" : "offline";
ga_write_sysfs_file(dirfd, "state", new_state, strlen(new_state),
&local_err);
if (local_err) {
error_free(local_err);
result->response =
GUEST_MEMORY_BLOCK_RESPONSE_TYPE_OPERATION_FAILED;
goto out2;
}
result->response = GUEST_MEMORY_BLOCK_RESPONSE_TYPE_SUCCESS;
result->has_error_code = false;
} /* otherwise pretend successful re-(on|off)-lining */
}
g_free(status);
close(dirfd);
return;
out2:
g_free(status);
close(dirfd);
out1:
if (!sys2memblk) {
result->has_error_code = true;
result->error_code = errno;
}
}
GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
{
GuestMemoryBlockList *head, **tail;
Error *local_err = NULL;
struct dirent *de;
DIR *dp;
head = NULL;
tail = &head;
dp = opendir("/sys/devices/system/memory/");
if (!dp) {
/* it's ok if this happens to be a system that doesn't expose
* memory blocks via sysfs, but otherwise we should report
* an error
*/
if (errno != ENOENT) {
error_setg_errno(errp, errno, "Can't open directory"
"\"/sys/devices/system/memory/\"");
}
return NULL;
}
/* Note: the phys_index of memory block may be discontinuous,
* this is because a memblk is the unit of the Sparse Memory design, which
* allows discontinuous memory ranges (ex. NUMA), so here we should
* traverse the memory block directory.
*/
while ((de = readdir(dp)) != NULL) {
GuestMemoryBlock *mem_blk;
if ((strncmp(de->d_name, "memory", 6) != 0) ||
!(de->d_type & DT_DIR)) {
continue;
}
mem_blk = g_malloc0(sizeof *mem_blk);
/* The d_name is "memoryXXX", phys_index is block id, same as XXX */
mem_blk->phys_index = strtoul(&de->d_name[6], NULL, 10);
mem_blk->has_can_offline = true; /* lolspeak ftw */
transfer_memory_block(mem_blk, true, NULL, &local_err);
if (local_err) {
break;
}
QAPI_LIST_APPEND(tail, mem_blk);
}
closedir(dp);
if (local_err == NULL) {
/* there's no guest with zero memory blocks */
if (head == NULL) {
error_setg(errp, "guest reported zero memory blocks!");
}
return head;
}
qapi_free_GuestMemoryBlockList(head);
error_propagate(errp, local_err);
return NULL;
}
GuestMemoryBlockResponseList *
qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
{
GuestMemoryBlockResponseList *head, **tail;
Error *local_err = NULL;
head = NULL;
tail = &head;
while (mem_blks != NULL) {
GuestMemoryBlockResponse *result;
GuestMemoryBlock *current_mem_blk = mem_blks->value;
result = g_malloc0(sizeof(*result));
result->phys_index = current_mem_blk->phys_index;
transfer_memory_block(current_mem_blk, false, result, &local_err);
if (local_err) { /* should never happen */
goto err;
}
QAPI_LIST_APPEND(tail, result);
mem_blks = mem_blks->next;
}
return head;
err:
qapi_free_GuestMemoryBlockResponseList(head);
error_propagate(errp, local_err);
return NULL;
}
GuestMemoryBlockInfo *qmp_guest_get_memory_block_info(Error **errp)
{
Error *local_err = NULL;
char *dirpath;
int dirfd;
char *buf;
GuestMemoryBlockInfo *info;
dirpath = g_strdup_printf("/sys/devices/system/memory/");
dirfd = open(dirpath, O_RDONLY | O_DIRECTORY);
if (dirfd == -1) {
error_setg_errno(errp, errno, "open(\"%s\")", dirpath);
g_free(dirpath);
return NULL;
}
g_free(dirpath);
buf = g_malloc0(20);
ga_read_sysfs_file(dirfd, "block_size_bytes", buf, 20, &local_err);
close(dirfd);
if (local_err) {
g_free(buf);
error_propagate(errp, local_err);
return NULL;
}
info = g_new0(GuestMemoryBlockInfo, 1);
info->size = strtol(buf, NULL, 16); /* the unit is bytes */
g_free(buf);
return info;
}
#else /* defined(__linux__) */
void qmp_guest_suspend_disk(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
}
void qmp_guest_suspend_ram(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
}
void qmp_guest_suspend_hybrid(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
}
GuestNetworkInterfaceList *qmp_guest_network_get_interfaces(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return -1;
}
qga: add guest-set-user-password command Add a new 'guest-set-user-password' command for changing the password of guest OS user accounts. This command is needed to enable OpenStack to support its API for changing the admin password of guests running on KVM/QEMU. It is not practical to provide a command at the QEMU level explicitly targetting administrator account password change only, since different guest OS have different names for the admin account. While UNIX systems use 'root', Windows systems typically use 'Administrator' and even that can be renamed. Higher level apps like OpenStack have the ability to figure out the correct admin account name since they have info that QEMU/libvirt do not. The command accepts either the clear text password string, encoded in base64 to make it 8-bit safe in JSON: $ echo -n "123456" | base64 MTIzNDU2 $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": false, "username": "root", "password": "MTIzNDU2" } }' {"return":{}} Or a password that has already been run though a crypt(3) like algorithm appropriate for the guest, again then base64 encoded: $ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64 JDYkb...snip...YT2Ey $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": true, "username": "root", "password": "JDYkb...snip...YT2Ey" } }' NB windows support is desirable, but not implemented in this patch. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-02-11 12:26:12 +01:00
void qmp_guest_set_user_password(const char *username,
const char *password,
bool crypted,
Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
qga: add guest-set-user-password command Add a new 'guest-set-user-password' command for changing the password of guest OS user accounts. This command is needed to enable OpenStack to support its API for changing the admin password of guests running on KVM/QEMU. It is not practical to provide a command at the QEMU level explicitly targetting administrator account password change only, since different guest OS have different names for the admin account. While UNIX systems use 'root', Windows systems typically use 'Administrator' and even that can be renamed. Higher level apps like OpenStack have the ability to figure out the correct admin account name since they have info that QEMU/libvirt do not. The command accepts either the clear text password string, encoded in base64 to make it 8-bit safe in JSON: $ echo -n "123456" | base64 MTIzNDU2 $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": false, "username": "root", "password": "MTIzNDU2" } }' {"return":{}} Or a password that has already been run though a crypt(3) like algorithm appropriate for the guest, again then base64 encoded: $ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64 JDYkb...snip...YT2Ey $ virsh -c qemu:///system qemu-agent-command f21x86_64 \ '{ "execute": "guest-set-user-password", "arguments": { "crypted": true, "username": "root", "password": "JDYkb...snip...YT2Ey" } }' NB windows support is desirable, but not implemented in this patch. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-02-11 12:26:12 +01:00
}
GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
GuestMemoryBlockResponseList *
qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
GuestMemoryBlockInfo *qmp_guest_get_memory_block_info(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
#endif
#if !defined(CONFIG_FSFREEZE)
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
GuestFilesystemInfoList *qmp_guest_get_fsinfo(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
return NULL;
}
GuestFsfreezeStatus qmp_guest_fsfreeze_status(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_freeze(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints,
strList *mountpoints,
Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_thaw(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return 0;
}
GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
#endif /* CONFIG_FSFREEZE */
#if !defined(CONFIG_FSTRIM)
GuestFilesystemTrimResponse *
qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
#endif
/* add unsupported commands to the blacklist */
GList *ga_command_blacklist_init(GList *blacklist)
{
#if !defined(__linux__)
{
const char *list[] = {
"guest-suspend-disk", "guest-suspend-ram",
"guest-suspend-hybrid", "guest-network-get-interfaces",
"guest-get-vcpus", "guest-set-vcpus",
"guest-get-memory-blocks", "guest-set-memory-blocks",
"guest-get-memory-block-size", "guest-get-memory-block-info",
NULL};
char **p = (char **)list;
while (*p) {
blacklist = g_list_append(blacklist, g_strdup(*p++));
}
}
#endif
#if !defined(CONFIG_FSFREEZE)
{
const char *list[] = {
"guest-get-fsinfo", "guest-fsfreeze-status",
"guest-fsfreeze-freeze", "guest-fsfreeze-freeze-list",
"guest-fsfreeze-thaw", "guest-get-fsinfo",
"guest-get-disks", NULL};
char **p = (char **)list;
while (*p) {
blacklist = g_list_append(blacklist, g_strdup(*p++));
}
}
#endif
#if !defined(CONFIG_FSTRIM)
blacklist = g_list_append(blacklist, g_strdup("guest-fstrim"));
#endif
blacklist = g_list_append(blacklist, g_strdup("guest-get-devices"));
return blacklist;
}
/* register init/cleanup routines for stateful command groups */
void ga_command_state_init(GAState *s, GACommandState *cs)
{
#if defined(CONFIG_FSFREEZE)
ga_command_state_add(cs, NULL, guest_fsfreeze_cleanup);
#endif
}
#ifdef HAVE_UTMPX
#define QGA_MICRO_SECOND_TO_SECOND 1000000
static double ga_get_login_time(struct utmpx *user_info)
{
double seconds = (double)user_info->ut_tv.tv_sec;
double useconds = (double)user_info->ut_tv.tv_usec;
useconds /= QGA_MICRO_SECOND_TO_SECOND;
return seconds + useconds;
}
GuestUserList *qmp_guest_get_users(Error **errp)
{
GHashTable *cache = NULL;
GuestUserList *head = NULL, **tail = &head;
struct utmpx *user_info = NULL;
gpointer value = NULL;
GuestUser *user = NULL;
double login_time = 0;
cache = g_hash_table_new(g_str_hash, g_str_equal);
setutxent();
for (;;) {
user_info = getutxent();
if (user_info == NULL) {
break;
} else if (user_info->ut_type != USER_PROCESS) {
continue;
} else if (g_hash_table_contains(cache, user_info->ut_user)) {
value = g_hash_table_lookup(cache, user_info->ut_user);
user = (GuestUser *)value;
login_time = ga_get_login_time(user_info);
/* We're ensuring the earliest login time to be sent */
if (login_time < user->login_time) {
user->login_time = login_time;
}
continue;
}
user = g_new0(GuestUser, 1);
user->user = g_strdup(user_info->ut_user);
user->login_time = ga_get_login_time(user_info);
g_hash_table_insert(cache, user->user, user);
QAPI_LIST_APPEND(tail, user);
}
endutxent();
g_hash_table_destroy(cache);
return head;
}
#else
GuestUserList *qmp_guest_get_users(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}
#endif
/* Replace escaped special characters with theire real values. The replacement
* is done in place -- returned value is in the original string.
*/
static void ga_osrelease_replace_special(gchar *value)
{
gchar *p, *p2, quote;
/* Trim the string at first space or semicolon if it is not enclosed in
* single or double quotes. */
if ((value[0] != '"') || (value[0] == '\'')) {
p = strchr(value, ' ');
if (p != NULL) {
*p = 0;
}
p = strchr(value, ';');
if (p != NULL) {
*p = 0;
}
return;
}
quote = value[0];
p2 = value;
p = value + 1;
while (*p != 0) {
if (*p == '\\') {
p++;
switch (*p) {
case '$':
case '\'':
case '"':
case '\\':
case '`':
break;
default:
/* Keep literal backslash followed by whatever is there */
p--;
break;
}
} else if (*p == quote) {
*p2 = 0;
break;
}
*(p2++) = *(p++);
}
}
static GKeyFile *ga_parse_osrelease(const char *fname)
{
gchar *content = NULL;
gchar *content2 = NULL;
GError *err = NULL;
GKeyFile *keys = g_key_file_new();
const char *group = "[os-release]\n";
if (!g_file_get_contents(fname, &content, NULL, &err)) {
slog("failed to read '%s', error: %s", fname, err->message);
goto fail;
}
if (!g_utf8_validate(content, -1, NULL)) {
slog("file is not utf-8 encoded: %s", fname);
goto fail;
}
content2 = g_strdup_printf("%s%s", group, content);
if (!g_key_file_load_from_data(keys, content2, -1, G_KEY_FILE_NONE,
&err)) {
slog("failed to parse file '%s', error: %s", fname, err->message);
goto fail;
}
g_free(content);
g_free(content2);
return keys;
fail:
g_error_free(err);
g_free(content);
g_free(content2);
g_key_file_free(keys);
return NULL;
}
GuestOSInfo *qmp_guest_get_osinfo(Error **errp)
{
GuestOSInfo *info = NULL;
struct utsname kinfo;
GKeyFile *osrelease = NULL;
const char *qga_os_release = g_getenv("QGA_OS_RELEASE");
info = g_new0(GuestOSInfo, 1);
if (uname(&kinfo) != 0) {
error_setg_errno(errp, errno, "uname failed");
} else {
info->has_kernel_version = true;
info->kernel_version = g_strdup(kinfo.version);
info->has_kernel_release = true;
info->kernel_release = g_strdup(kinfo.release);
info->has_machine = true;
info->machine = g_strdup(kinfo.machine);
}
if (qga_os_release != NULL) {
osrelease = ga_parse_osrelease(qga_os_release);
} else {
osrelease = ga_parse_osrelease("/etc/os-release");
if (osrelease == NULL) {
osrelease = ga_parse_osrelease("/usr/lib/os-release");
}
}
if (osrelease != NULL) {
char *value;
#define GET_FIELD(field, osfield) do { \
value = g_key_file_get_value(osrelease, "os-release", osfield, NULL); \
if (value != NULL) { \
ga_osrelease_replace_special(value); \
info->has_ ## field = true; \
info->field = value; \
} \
} while (0)
GET_FIELD(id, "ID");
GET_FIELD(name, "NAME");
GET_FIELD(pretty_name, "PRETTY_NAME");
GET_FIELD(version, "VERSION");
GET_FIELD(version_id, "VERSION_ID");
GET_FIELD(variant, "VARIANT");
GET_FIELD(variant_id, "VARIANT_ID");
#undef GET_FIELD
g_key_file_free(osrelease);
}
return info;
}
GuestDeviceInfoList *qmp_guest_get_devices(Error **errp)
{
error_setg(errp, QERR_UNSUPPORTED);
return NULL;
}