qemu-e2k/qga/commands-posix.c

2007 lines
54 KiB
C
Raw Normal View History

/*
* QEMU Guest Agent POSIX-specific command implementations
*
* Copyright IBM Corp. 2011
*
* Authors:
* Michael Roth <mdroth@linux.vnet.ibm.com>
* Michal Privoznik <mprivozn@redhat.com>
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include <glib.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/wait.h>
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
#include <dirent.h>
#include <stdio.h>
#include <string.h>
#include <sys/stat.h>
#include <inttypes.h>
#include "qga/guest-agent-core.h"
#include "qga-qmp-commands.h"
#include "qapi/qmp/qerror.h"
#include "qemu/queue.h"
#include "qemu/host-utils.h"
#ifndef CONFIG_HAS_ENVIRON
#ifdef __APPLE__
#include <crt_externs.h>
#define environ (*_NSGetEnviron())
#else
extern char **environ;
#endif
#endif
#if defined(__linux__)
#include <mntent.h>
#include <linux/fs.h>
#include <ifaddrs.h>
#include <arpa/inet.h>
#include <sys/socket.h>
#include <net/if.h>
#ifdef FIFREEZE
#define CONFIG_FSFREEZE
#endif
#ifdef FITRIM
#define CONFIG_FSTRIM
#endif
#endif
static void ga_wait_child(pid_t pid, int *status, Error **errp)
{
pid_t rpid;
*status = 0;
do {
rpid = waitpid(pid, status, 0);
} while (rpid == -1 && errno == EINTR);
if (rpid == -1) {
error_setg_errno(errp, errno, "failed to wait for child (pid: %d)",
pid);
return;
}
g_assert(rpid == pid);
}
void qmp_guest_shutdown(bool has_mode, const char *mode, Error **errp)
{
const char *shutdown_flag;
Error *local_err = NULL;
pid_t pid;
int status;
slog("guest-shutdown called, mode: %s", mode);
if (!has_mode || strcmp(mode, "powerdown") == 0) {
shutdown_flag = "-P";
} else if (strcmp(mode, "halt") == 0) {
shutdown_flag = "-H";
} else if (strcmp(mode, "reboot") == 0) {
shutdown_flag = "-r";
} else {
error_setg(errp,
"mode is invalid (valid values are: halt|powerdown|reboot");
return;
}
pid = fork();
if (pid == 0) {
/* child, start the shutdown */
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
execle("/sbin/shutdown", "shutdown", "-h", shutdown_flag, "+0",
"hypervisor initiated shutdown", (char*)NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
return;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "child process has failed to shutdown");
return;
}
/* succeeded */
}
int64_t qmp_guest_get_time(Error **errp)
{
int ret;
qemu_timeval tq;
int64_t time_ns;
ret = qemu_gettimeofday(&tq);
if (ret < 0) {
error_setg_errno(errp, errno, "Failed to get time");
return -1;
}
time_ns = tq.tv_sec * 1000000000LL + tq.tv_usec * 1000;
return time_ns;
}
void qmp_guest_set_time(bool has_time, int64_t time_ns, Error **errp)
{
int ret;
int status;
pid_t pid;
Error *local_err = NULL;
struct timeval tv;
/* If user has passed a time, validate and set it. */
if (has_time) {
/* year-2038 will overflow in case time_t is 32bit */
if (time_ns / 1000000000 != (time_t)(time_ns / 1000000000)) {
error_setg(errp, "Time %" PRId64 " is too large", time_ns);
return;
}
tv.tv_sec = time_ns / 1000000000;
tv.tv_usec = (time_ns % 1000000000) / 1000;
ret = settimeofday(&tv, NULL);
if (ret < 0) {
error_setg_errno(errp, errno, "Failed to set time to guest");
return;
}
}
/* Now, if user has passed a time to set and the system time is set, we
* just need to synchronize the hardware clock. However, if no time was
* passed, user is requesting the opposite: set the system time from the
* hardware clock (RTC). */
pid = fork();
if (pid == 0) {
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
/* Use '/sbin/hwclock -w' to set RTC from the system time,
* or '/sbin/hwclock -s' to set the system time from RTC. */
execle("/sbin/hwclock", "hwclock", has_time ? "-w" : "-s",
NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
return;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "hwclock failed to set hardware clock to system time");
return;
}
}
typedef struct GuestFileHandle {
uint64_t id;
FILE *fh;
QTAILQ_ENTRY(GuestFileHandle) next;
} GuestFileHandle;
static struct {
QTAILQ_HEAD(, GuestFileHandle) filehandles;
} guest_file_state;
static int64_t guest_file_handle_add(FILE *fh, Error **errp)
{
GuestFileHandle *gfh;
int64_t handle;
handle = ga_get_fd_handle(ga_state, errp);
if (handle < 0) {
return -1;
}
gfh = g_malloc0(sizeof(GuestFileHandle));
gfh->id = handle;
gfh->fh = fh;
QTAILQ_INSERT_TAIL(&guest_file_state.filehandles, gfh, next);
return handle;
}
static GuestFileHandle *guest_file_handle_find(int64_t id, Error **errp)
{
GuestFileHandle *gfh;
QTAILQ_FOREACH(gfh, &guest_file_state.filehandles, next)
{
if (gfh->id == id) {
return gfh;
}
}
error_setg(errp, "handle '%" PRId64 "' has not been found", id);
return NULL;
}
typedef const char * const ccpc;
#ifndef O_BINARY
#define O_BINARY 0
#endif
/* http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html */
static const struct {
ccpc *forms;
int oflag_base;
} guest_file_open_modes[] = {
{ (ccpc[]){ "r", NULL }, O_RDONLY },
{ (ccpc[]){ "rb", NULL }, O_RDONLY | O_BINARY },
{ (ccpc[]){ "w", NULL }, O_WRONLY | O_CREAT | O_TRUNC },
{ (ccpc[]){ "wb", NULL }, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY },
{ (ccpc[]){ "a", NULL }, O_WRONLY | O_CREAT | O_APPEND },
{ (ccpc[]){ "ab", NULL }, O_WRONLY | O_CREAT | O_APPEND | O_BINARY },
{ (ccpc[]){ "r+", NULL }, O_RDWR },
{ (ccpc[]){ "rb+", "r+b", NULL }, O_RDWR | O_BINARY },
{ (ccpc[]){ "w+", NULL }, O_RDWR | O_CREAT | O_TRUNC },
{ (ccpc[]){ "wb+", "w+b", NULL }, O_RDWR | O_CREAT | O_TRUNC | O_BINARY },
{ (ccpc[]){ "a+", NULL }, O_RDWR | O_CREAT | O_APPEND },
{ (ccpc[]){ "ab+", "a+b", NULL }, O_RDWR | O_CREAT | O_APPEND | O_BINARY }
};
static int
find_open_flag(const char *mode_str, Error **errp)
{
unsigned mode;
for (mode = 0; mode < ARRAY_SIZE(guest_file_open_modes); ++mode) {
ccpc *form;
form = guest_file_open_modes[mode].forms;
while (*form != NULL && strcmp(*form, mode_str) != 0) {
++form;
}
if (*form != NULL) {
break;
}
}
if (mode == ARRAY_SIZE(guest_file_open_modes)) {
error_setg(errp, "invalid file open mode '%s'", mode_str);
return -1;
}
return guest_file_open_modes[mode].oflag_base | O_NOCTTY | O_NONBLOCK;
}
#define DEFAULT_NEW_FILE_MODE (S_IRUSR | S_IWUSR | \
S_IRGRP | S_IWGRP | \
S_IROTH | S_IWOTH)
static FILE *
safe_open_or_create(const char *path, const char *mode, Error **errp)
{
Error *local_err = NULL;
int oflag;
oflag = find_open_flag(mode, &local_err);
if (local_err == NULL) {
int fd;
/* If the caller wants / allows creation of a new file, we implement it
* with a two step process: open() + (open() / fchmod()).
*
* First we insist on creating the file exclusively as a new file. If
* that succeeds, we're free to set any file-mode bits on it. (The
* motivation is that we want to set those file-mode bits independently
* of the current umask.)
*
* If the exclusive creation fails because the file already exists
* (EEXIST is not possible for any other reason), we just attempt to
* open the file, but in this case we won't be allowed to change the
* file-mode bits on the preexistent file.
*
* The pathname should never disappear between the two open()s in
* practice. If it happens, then someone very likely tried to race us.
* In this case just go ahead and report the ENOENT from the second
* open() to the caller.
*
* If the caller wants to open a preexistent file, then the first
* open() is decisive and its third argument is ignored, and the second
* open() and the fchmod() are never called.
*/
fd = open(path, oflag | ((oflag & O_CREAT) ? O_EXCL : 0), 0);
if (fd == -1 && errno == EEXIST) {
oflag &= ~(unsigned)O_CREAT;
fd = open(path, oflag);
}
if (fd == -1) {
error_setg_errno(&local_err, errno, "failed to open file '%s' "
"(mode: '%s')", path, mode);
} else {
qemu_set_cloexec(fd);
if ((oflag & O_CREAT) && fchmod(fd, DEFAULT_NEW_FILE_MODE) == -1) {
error_setg_errno(&local_err, errno, "failed to set permission "
"0%03o on new file '%s' (mode: '%s')",
(unsigned)DEFAULT_NEW_FILE_MODE, path, mode);
} else {
FILE *f;
f = fdopen(fd, mode);
if (f == NULL) {
error_setg_errno(&local_err, errno, "failed to associate "
"stdio stream with file descriptor %d, "
"file '%s' (mode: '%s')", fd, path, mode);
} else {
return f;
}
}
close(fd);
if (oflag & O_CREAT) {
unlink(path);
}
}
}
error_propagate(errp, local_err);
return NULL;
}
int64_t qmp_guest_file_open(const char *path, bool has_mode, const char *mode,
Error **errp)
{
FILE *fh;
Error *local_err = NULL;
int fd;
int64_t ret = -1, handle;
if (!has_mode) {
mode = "r";
}
slog("guest-file-open called, filepath: %s, mode: %s", path, mode);
fh = safe_open_or_create(path, mode, &local_err);
if (local_err != NULL) {
error_propagate(errp, local_err);
return -1;
}
/* set fd non-blocking to avoid common use cases (like reading from a
* named pipe) from hanging the agent
*/
fd = fileno(fh);
ret = fcntl(fd, F_GETFL);
ret = fcntl(fd, F_SETFL, ret | O_NONBLOCK);
if (ret == -1) {
error_setg_errno(errp, errno, "failed to make file '%s' non-blocking",
path);
fclose(fh);
return -1;
}
handle = guest_file_handle_add(fh, errp);
if (handle < 0) {
fclose(fh);
return -1;
}
slog("guest-file-open, handle: %" PRId64, handle);
return handle;
}
void qmp_guest_file_close(int64_t handle, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
int ret;
slog("guest-file-close called, handle: %" PRId64, handle);
if (!gfh) {
return;
}
ret = fclose(gfh->fh);
if (ret == EOF) {
error_setg_errno(errp, errno, "failed to close handle");
return;
}
QTAILQ_REMOVE(&guest_file_state.filehandles, gfh, next);
g_free(gfh);
}
struct GuestFileRead *qmp_guest_file_read(int64_t handle, bool has_count,
int64_t count, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
GuestFileRead *read_data = NULL;
guchar *buf;
FILE *fh;
size_t read_count;
if (!gfh) {
return NULL;
}
if (!has_count) {
count = QGA_READ_COUNT_DEFAULT;
} else if (count < 0) {
error_setg(errp, "value '%" PRId64 "' is invalid for argument count",
count);
return NULL;
}
fh = gfh->fh;
buf = g_malloc0(count+1);
read_count = fread(buf, 1, count, fh);
if (ferror(fh)) {
error_setg_errno(errp, errno, "failed to read file");
slog("guest-file-read failed, handle: %" PRId64, handle);
} else {
buf[read_count] = 0;
read_data = g_malloc0(sizeof(GuestFileRead));
read_data->count = read_count;
read_data->eof = feof(fh);
if (read_count) {
read_data->buf_b64 = g_base64_encode(buf, read_count);
}
}
g_free(buf);
clearerr(fh);
return read_data;
}
GuestFileWrite *qmp_guest_file_write(int64_t handle, const char *buf_b64,
bool has_count, int64_t count,
Error **errp)
{
GuestFileWrite *write_data = NULL;
guchar *buf;
gsize buf_len;
int write_count;
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
FILE *fh;
if (!gfh) {
return NULL;
}
fh = gfh->fh;
buf = g_base64_decode(buf_b64, &buf_len);
if (!has_count) {
count = buf_len;
} else if (count < 0 || count > buf_len) {
error_setg(errp, "value '%" PRId64 "' is invalid for argument count",
count);
g_free(buf);
return NULL;
}
write_count = fwrite(buf, 1, count, fh);
if (ferror(fh)) {
error_setg_errno(errp, errno, "failed to write to file");
slog("guest-file-write failed, handle: %" PRId64, handle);
} else {
write_data = g_malloc0(sizeof(GuestFileWrite));
write_data->count = write_count;
write_data->eof = feof(fh);
}
g_free(buf);
clearerr(fh);
return write_data;
}
struct GuestFileSeek *qmp_guest_file_seek(int64_t handle, int64_t offset,
int64_t whence, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
GuestFileSeek *seek_data = NULL;
FILE *fh;
int ret;
if (!gfh) {
return NULL;
}
fh = gfh->fh;
ret = fseek(fh, offset, whence);
if (ret == -1) {
error_setg_errno(errp, errno, "failed to seek file");
} else {
seek_data = g_new0(GuestFileSeek, 1);
seek_data->position = ftell(fh);
seek_data->eof = feof(fh);
}
clearerr(fh);
return seek_data;
}
void qmp_guest_file_flush(int64_t handle, Error **errp)
{
GuestFileHandle *gfh = guest_file_handle_find(handle, errp);
FILE *fh;
int ret;
if (!gfh) {
return;
}
fh = gfh->fh;
ret = fflush(fh);
if (ret == EOF) {
error_setg_errno(errp, errno, "failed to flush file");
}
}
static void guest_file_init(void)
{
QTAILQ_INIT(&guest_file_state.filehandles);
}
/* linux-specific implementations. avoid this if at all possible. */
#if defined(__linux__)
#if defined(CONFIG_FSFREEZE) || defined(CONFIG_FSTRIM)
typedef struct FsMount {
char *dirname;
char *devtype;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
unsigned int devmajor, devminor;
QTAILQ_ENTRY(FsMount) next;
} FsMount;
typedef QTAILQ_HEAD(FsMountList, FsMount) FsMountList;
static void free_fs_mount_list(FsMountList *mounts)
{
FsMount *mount, *temp;
if (!mounts) {
return;
}
QTAILQ_FOREACH_SAFE(mount, mounts, next, temp) {
QTAILQ_REMOVE(mounts, mount, next);
g_free(mount->dirname);
g_free(mount->devtype);
g_free(mount);
}
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static int dev_major_minor(const char *devpath,
unsigned int *devmajor, unsigned int *devminor)
{
struct stat st;
*devmajor = 0;
*devminor = 0;
if (stat(devpath, &st) < 0) {
slog("failed to stat device file '%s': %s", devpath, strerror(errno));
return -1;
}
if (S_ISDIR(st.st_mode)) {
/* It is bind mount */
return -2;
}
if (S_ISBLK(st.st_mode)) {
*devmajor = major(st.st_rdev);
*devminor = minor(st.st_rdev);
return 0;
}
return -1;
}
/*
* Walk the mount table and build a list of local file systems
*/
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static void build_fs_mount_list_from_mtab(FsMountList *mounts, Error **errp)
{
struct mntent *ment;
FsMount *mount;
char const *mtab = "/proc/self/mounts";
FILE *fp;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
unsigned int devmajor, devminor;
fp = setmntent(mtab, "r");
if (!fp) {
error_setg(errp, "failed to open mtab file: '%s'", mtab);
return;
}
while ((ment = getmntent(fp))) {
/*
* An entry which device name doesn't start with a '/' is
* either a dummy file system or a network file system.
* Add special handling for smbfs and cifs as is done by
* coreutils as well.
*/
if ((ment->mnt_fsname[0] != '/') ||
(strcmp(ment->mnt_type, "smbfs") == 0) ||
(strcmp(ment->mnt_type, "cifs") == 0)) {
continue;
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (dev_major_minor(ment->mnt_fsname, &devmajor, &devminor) == -2) {
/* Skip bind mounts */
continue;
}
mount = g_malloc0(sizeof(FsMount));
mount->dirname = g_strdup(ment->mnt_dir);
mount->devtype = g_strdup(ment->mnt_type);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
mount->devmajor = devmajor;
mount->devminor = devminor;
QTAILQ_INSERT_TAIL(mounts, mount, next);
}
endmntent(fp);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static void decode_mntname(char *name, int len)
{
int i, j = 0;
for (i = 0; i <= len; i++) {
if (name[i] != '\\') {
name[j++] = name[i];
} else if (name[i + 1] == '\\') {
name[j++] = '\\';
i++;
} else if (name[i + 1] >= '0' && name[i + 1] <= '3' &&
name[i + 2] >= '0' && name[i + 2] <= '7' &&
name[i + 3] >= '0' && name[i + 3] <= '7') {
name[j++] = (name[i + 1] - '0') * 64 +
(name[i + 2] - '0') * 8 +
(name[i + 3] - '0');
i += 3;
} else {
name[j++] = name[i];
}
}
}
static void build_fs_mount_list(FsMountList *mounts, Error **errp)
{
FsMount *mount;
char const *mountinfo = "/proc/self/mountinfo";
FILE *fp;
char *line = NULL, *dash;
size_t n;
char check;
unsigned int devmajor, devminor;
int ret, dir_s, dir_e, type_s, type_e, dev_s, dev_e;
fp = fopen(mountinfo, "r");
if (!fp) {
build_fs_mount_list_from_mtab(mounts, errp);
return;
}
while (getline(&line, &n, fp) != -1) {
ret = sscanf(line, "%*u %*u %u:%u %*s %n%*s%n%c",
&devmajor, &devminor, &dir_s, &dir_e, &check);
if (ret < 3) {
continue;
}
dash = strstr(line + dir_e, " - ");
if (!dash) {
continue;
}
ret = sscanf(dash, " - %n%*s%n %n%*s%n%c",
&type_s, &type_e, &dev_s, &dev_e, &check);
if (ret < 1) {
continue;
}
line[dir_e] = 0;
dash[type_e] = 0;
dash[dev_e] = 0;
decode_mntname(line + dir_s, dir_e - dir_s);
decode_mntname(dash + dev_s, dev_e - dev_s);
if (devmajor == 0) {
/* btrfs reports major number = 0 */
if (strcmp("btrfs", dash + type_s) != 0 ||
dev_major_minor(dash + dev_s, &devmajor, &devminor) < 0) {
continue;
}
}
mount = g_malloc0(sizeof(FsMount));
mount->dirname = g_strdup(line + dir_s);
mount->devtype = g_strdup(dash + type_s);
mount->devmajor = devmajor;
mount->devminor = devminor;
QTAILQ_INSERT_TAIL(mounts, mount, next);
}
free(line);
fclose(fp);
}
#endif
#if defined(CONFIG_FSFREEZE)
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
static char *get_pci_driver(char const *syspath, int pathlen, Error **errp)
{
char *path;
char *dpath;
char *driver = NULL;
char buf[PATH_MAX];
ssize_t len;
path = g_strndup(syspath, pathlen);
dpath = g_strdup_printf("%s/driver", path);
len = readlink(dpath, buf, sizeof(buf) - 1);
if (len != -1) {
buf[len] = 0;
driver = g_strdup(basename(buf));
}
g_free(dpath);
g_free(path);
return driver;
}
static int compare_uint(const void *_a, const void *_b)
{
unsigned int a = *(unsigned int *)_a;
unsigned int b = *(unsigned int *)_b;
return a < b ? -1 : a > b ? 1 : 0;
}
/* Walk the specified sysfs and build a sorted list of host or ata numbers */
static int build_hosts(char const *syspath, char const *host, bool ata,
unsigned int *hosts, int hosts_max, Error **errp)
{
char *path;
DIR *dir;
struct dirent *entry;
int i = 0;
path = g_strndup(syspath, host - syspath);
dir = opendir(path);
if (!dir) {
error_setg_errno(errp, errno, "opendir(\"%s\")", path);
g_free(path);
return -1;
}
while (i < hosts_max) {
entry = readdir(dir);
if (!entry) {
break;
}
if (ata && sscanf(entry->d_name, "ata%d", hosts + i) == 1) {
++i;
} else if (!ata && sscanf(entry->d_name, "host%d", hosts + i) == 1) {
++i;
}
}
qsort(hosts, i, sizeof(hosts[0]), compare_uint);
g_free(path);
closedir(dir);
return i;
}
/* Store disk device info specified by @sysfs into @fs */
static void build_guest_fsinfo_for_real_device(char const *syspath,
GuestFilesystemInfo *fs,
Error **errp)
{
unsigned int pci[4], host, hosts[8], tgt[3];
int i, nhosts = 0, pcilen;
GuestDiskAddress *disk;
GuestPCIAddress *pciaddr;
GuestDiskAddressList *list = NULL;
bool has_ata = false, has_host = false, has_tgt = false;
char *p, *q, *driver = NULL;
p = strstr(syspath, "/devices/pci");
if (!p || sscanf(p + 12, "%*x:%*x/%x:%x:%x.%x%n",
pci, pci + 1, pci + 2, pci + 3, &pcilen) < 4) {
g_debug("only pci device is supported: sysfs path \"%s\"", syspath);
return;
}
driver = get_pci_driver(syspath, (p + 12 + pcilen) - syspath, errp);
if (!driver) {
goto cleanup;
}
p = strstr(syspath, "/target");
if (p && sscanf(p + 7, "%*u:%*u:%*u/%*u:%u:%u:%u",
tgt, tgt + 1, tgt + 2) == 3) {
has_tgt = true;
}
p = strstr(syspath, "/ata");
if (p) {
q = p + 4;
has_ata = true;
} else {
p = strstr(syspath, "/host");
q = p + 5;
}
if (p && sscanf(q, "%u", &host) == 1) {
has_host = true;
nhosts = build_hosts(syspath, p, has_ata, hosts,
sizeof(hosts) / sizeof(hosts[0]), errp);
if (nhosts < 0) {
goto cleanup;
}
}
pciaddr = g_malloc0(sizeof(*pciaddr));
pciaddr->domain = pci[0];
pciaddr->bus = pci[1];
pciaddr->slot = pci[2];
pciaddr->function = pci[3];
disk = g_malloc0(sizeof(*disk));
disk->pci_controller = pciaddr;
list = g_malloc0(sizeof(*list));
list->value = disk;
if (strcmp(driver, "ata_piix") == 0) {
/* a host per ide bus, target*:0:<unit>:0 */
if (!has_host || !has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
for (i = 0; i < nhosts; i++) {
if (host == hosts[i]) {
disk->bus_type = GUEST_DISK_BUS_TYPE_IDE;
disk->bus = i;
disk->unit = tgt[1];
break;
}
}
if (i >= nhosts) {
g_debug("no host for '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
} else if (strcmp(driver, "sym53c8xx") == 0) {
/* scsi(LSI Logic): target*:0:<unit>:0 */
if (!has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
disk->bus_type = GUEST_DISK_BUS_TYPE_SCSI;
disk->unit = tgt[1];
} else if (strcmp(driver, "virtio-pci") == 0) {
if (has_tgt) {
/* virtio-scsi: target*:0:0:<unit> */
disk->bus_type = GUEST_DISK_BUS_TYPE_SCSI;
disk->unit = tgt[2];
} else {
/* virtio-blk: 1 disk per 1 device */
disk->bus_type = GUEST_DISK_BUS_TYPE_VIRTIO;
}
} else if (strcmp(driver, "ahci") == 0) {
/* ahci: 1 host per 1 unit */
if (!has_host || !has_tgt) {
g_debug("invalid sysfs path '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
for (i = 0; i < nhosts; i++) {
if (host == hosts[i]) {
disk->unit = i;
disk->bus_type = GUEST_DISK_BUS_TYPE_SATA;
break;
}
}
if (i >= nhosts) {
g_debug("no host for '%s' (driver '%s')", syspath, driver);
goto cleanup;
}
} else {
g_debug("unknown driver '%s' (sysfs path '%s')", driver, syspath);
goto cleanup;
}
list->next = fs->disk;
fs->disk = list;
g_free(driver);
return;
cleanup:
if (list) {
qapi_free_GuestDiskAddressList(list);
}
g_free(driver);
}
static void build_guest_fsinfo_for_device(char const *devpath,
GuestFilesystemInfo *fs,
Error **errp);
/* Store a list of slave devices of virtual volume specified by @syspath into
* @fs */
static void build_guest_fsinfo_for_virtual_device(char const *syspath,
GuestFilesystemInfo *fs,
Error **errp)
{
DIR *dir;
char *dirpath;
struct dirent *entry;
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
dirpath = g_strdup_printf("%s/slaves", syspath);
dir = opendir(dirpath);
if (!dir) {
error_setg_errno(errp, errno, "opendir(\"%s\")", dirpath);
g_free(dirpath);
return;
}
for (;;) {
errno = 0;
entry = readdir(dir);
if (entry == NULL) {
if (errno) {
error_setg_errno(errp, errno, "readdir(\"%s\")", dirpath);
}
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
break;
}
if (entry->d_type == DT_LNK) {
char *path;
g_debug(" slave device '%s'", entry->d_name);
path = g_strdup_printf("%s/slaves/%s", syspath, entry->d_name);
build_guest_fsinfo_for_device(path, fs, errp);
g_free(path);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
if (*errp) {
break;
}
}
}
g_free(dirpath);
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
closedir(dir);
}
/* Dispatch to functions for virtual/real device */
static void build_guest_fsinfo_for_device(char const *devpath,
GuestFilesystemInfo *fs,
Error **errp)
{
char *syspath = realpath(devpath, NULL);
if (!syspath) {
error_setg_errno(errp, errno, "realpath(\"%s\")", devpath);
return;
}
if (!fs->name) {
fs->name = g_strdup(basename(syspath));
}
g_debug(" parse sysfs path '%s'", syspath);
if (strstr(syspath, "/devices/virtual/block/")) {
build_guest_fsinfo_for_virtual_device(syspath, fs, errp);
} else {
build_guest_fsinfo_for_real_device(syspath, fs, errp);
}
free(syspath);
}
/* Return a list of the disk device(s)' info which @mount lies on */
static GuestFilesystemInfo *build_guest_fsinfo(struct FsMount *mount,
Error **errp)
{
GuestFilesystemInfo *fs = g_malloc0(sizeof(*fs));
char *devpath = g_strdup_printf("/sys/dev/block/%u:%u",
mount->devmajor, mount->devminor);
fs->mountpoint = g_strdup(mount->dirname);
fs->type = g_strdup(mount->devtype);
build_guest_fsinfo_for_device(devpath, fs, errp);
g_free(devpath);
return fs;
}
GuestFilesystemInfoList *qmp_guest_get_fsinfo(Error **errp)
{
FsMountList mounts;
struct FsMount *mount;
GuestFilesystemInfoList *new, *ret = NULL;
Error *local_err = NULL;
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return NULL;
}
QTAILQ_FOREACH(mount, &mounts, next) {
g_debug("Building guest fsinfo for '%s'", mount->dirname);
new = g_malloc0(sizeof(*ret));
new->value = build_guest_fsinfo(mount, &local_err);
new->next = ret;
ret = new;
if (local_err) {
error_propagate(errp, local_err);
qapi_free_GuestFilesystemInfoList(ret);
ret = NULL;
break;
}
}
free_fs_mount_list(&mounts);
return ret;
}
typedef enum {
FSFREEZE_HOOK_THAW = 0,
FSFREEZE_HOOK_FREEZE,
} FsfreezeHookArg;
static const char *fsfreeze_hook_arg_string[] = {
"thaw",
"freeze",
};
static void execute_fsfreeze_hook(FsfreezeHookArg arg, Error **errp)
{
int status;
pid_t pid;
const char *hook;
const char *arg_str = fsfreeze_hook_arg_string[arg];
Error *local_err = NULL;
hook = ga_fsfreeze_hook(ga_state);
if (!hook) {
return;
}
if (access(hook, X_OK) != 0) {
error_setg_errno(errp, errno, "can't access fsfreeze hook '%s'", hook);
return;
}
slog("executing fsfreeze hook with arg '%s'", arg_str);
pid = fork();
if (pid == 0) {
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
execle(hook, hook, arg_str, NULL, environ);
_exit(EXIT_FAILURE);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
return;
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (!WIFEXITED(status)) {
error_setg(errp, "fsfreeze hook has terminated abnormally");
return;
}
status = WEXITSTATUS(status);
if (status) {
error_setg(errp, "fsfreeze hook has failed with status %d", status);
return;
}
}
/*
* Return status of freeze/thaw
*/
GuestFsfreezeStatus qmp_guest_fsfreeze_status(Error **errp)
{
if (ga_is_frozen(ga_state)) {
return GUEST_FSFREEZE_STATUS_FROZEN;
}
return GUEST_FSFREEZE_STATUS_THAWED;
}
int64_t qmp_guest_fsfreeze_freeze(Error **errp)
{
return qmp_guest_fsfreeze_freeze_list(false, NULL, errp);
}
/*
* Walk list of mounted file systems in the guest, and freeze the ones which
* are real local file systems.
*/
int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints,
strList *mountpoints,
Error **errp)
{
int ret = 0, i = 0;
strList *list;
FsMountList mounts;
struct FsMount *mount;
Error *local_err = NULL;
int fd;
slog("guest-fsfreeze called");
execute_fsfreeze_hook(FSFREEZE_HOOK_FREEZE, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
/* cannot risk guest agent blocking itself on a write in this state */
ga_set_frozen(ga_state);
QTAILQ_FOREACH_REVERSE(mount, &mounts, FsMountList, next) {
/* To issue fsfreeze in the reverse order of mounts, check if the
* mount is listed in the list here */
if (has_mountpoints) {
for (list = mountpoints; list; list = list->next) {
if (strcmp(list->value, mount->dirname) == 0) {
break;
}
}
if (!list) {
continue;
}
}
fd = qemu_open(mount->dirname, O_RDONLY);
if (fd == -1) {
error_setg_errno(errp, errno, "failed to open %s", mount->dirname);
goto error;
}
/* we try to cull filesytems we know won't work in advance, but other
* filesytems may not implement fsfreeze for less obvious reasons.
* these will report EOPNOTSUPP. we simply ignore these when tallying
* the number of frozen filesystems.
*
* any other error means a failure to freeze a filesystem we
* expect to be freezable, so return an error in those cases
* and return system to thawed state.
*/
ret = ioctl(fd, FIFREEZE);
if (ret == -1) {
if (errno != EOPNOTSUPP) {
error_setg_errno(errp, errno, "failed to freeze %s",
mount->dirname);
close(fd);
goto error;
}
} else {
i++;
}
close(fd);
}
free_fs_mount_list(&mounts);
return i;
error:
free_fs_mount_list(&mounts);
qmp_guest_fsfreeze_thaw(NULL);
return 0;
}
/*
* Walk list of frozen file systems in the guest, and thaw them.
*/
int64_t qmp_guest_fsfreeze_thaw(Error **errp)
{
int ret;
FsMountList mounts;
FsMount *mount;
int fd, i = 0, logged;
Error *local_err = NULL;
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return 0;
}
QTAILQ_FOREACH(mount, &mounts, next) {
logged = false;
fd = qemu_open(mount->dirname, O_RDONLY);
if (fd == -1) {
continue;
}
/* we have no way of knowing whether a filesystem was actually unfrozen
* as a result of a successful call to FITHAW, only that if an error
* was returned the filesystem was *not* unfrozen by that particular
* call.
*
* since multiple preceding FIFREEZEs require multiple calls to FITHAW
* to unfreeze, continuing issuing FITHAW until an error is returned,
* in which case either the filesystem is in an unfreezable state, or,
* more likely, it was thawed previously (and remains so afterward).
*
* also, since the most recent successful call is the one that did
* the actual unfreeze, we can use this to provide an accurate count
* of the number of filesystems unfrozen by guest-fsfreeze-thaw, which
* may * be useful for determining whether a filesystem was unfrozen
* during the freeze/thaw phase by a process other than qemu-ga.
*/
do {
ret = ioctl(fd, FITHAW);
if (ret == 0 && !logged) {
i++;
logged = true;
}
} while (ret == 0);
close(fd);
}
ga_unset_frozen(ga_state);
free_fs_mount_list(&mounts);
execute_fsfreeze_hook(FSFREEZE_HOOK_THAW, errp);
return i;
}
static void guest_fsfreeze_cleanup(void)
{
Error *err = NULL;
if (ga_is_frozen(ga_state) == GUEST_FSFREEZE_STATUS_FROZEN) {
qmp_guest_fsfreeze_thaw(&err);
if (err) {
slog("failed to clean up frozen filesystems: %s",
error_get_pretty(err));
error_free(err);
}
}
}
#endif /* CONFIG_FSFREEZE */
#if defined(CONFIG_FSTRIM)
/*
* Walk list of mounted file systems in the guest, and trim them.
*/
void qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
{
int ret = 0;
FsMountList mounts;
struct FsMount *mount;
int fd;
Error *local_err = NULL;
struct fstrim_range r = {
.start = 0,
.len = -1,
.minlen = has_minimum ? minimum : 0,
};
slog("guest-fstrim called");
QTAILQ_INIT(&mounts);
build_fs_mount_list(&mounts, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
QTAILQ_FOREACH(mount, &mounts, next) {
fd = qemu_open(mount->dirname, O_RDONLY);
if (fd == -1) {
error_setg_errno(errp, errno, "failed to open %s", mount->dirname);
goto error;
}
/* We try to cull filesytems we know won't work in advance, but other
* filesytems may not implement fstrim for less obvious reasons. These
* will report EOPNOTSUPP; we simply ignore these errors. Any other
* error means an unexpected error, so return it in those cases. In
* some other cases ENOTTY will be reported (e.g. CD-ROMs).
*/
ret = ioctl(fd, FITRIM, &r);
if (ret == -1) {
if (errno != ENOTTY && errno != EOPNOTSUPP) {
error_setg_errno(errp, errno, "failed to trim %s",
mount->dirname);
close(fd);
goto error;
}
}
close(fd);
}
error:
free_fs_mount_list(&mounts);
}
#endif /* CONFIG_FSTRIM */
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
#define LINUX_SYS_STATE_FILE "/sys/power/state"
#define SUSPEND_SUPPORTED 0
#define SUSPEND_NOT_SUPPORTED 1
static void bios_supports_mode(const char *pmutils_bin, const char *pmutils_arg,
const char *sysfile_str, Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
Error *local_err = NULL;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
char *pmutils_path;
pid_t pid;
int status;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
pmutils_path = g_find_program_in_path(pmutils_bin);
pid = fork();
if (!pid) {
char buf[32]; /* hopefully big enough */
ssize_t ret;
int fd;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
if (pmutils_path) {
execle(pmutils_path, pmutils_bin, pmutils_arg, NULL, environ);
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
/*
* If we get here either pm-utils is not installed or execle() has
* failed. Let's try the manual method if the caller wants it.
*/
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (!sysfile_str) {
_exit(SUSPEND_NOT_SUPPORTED);
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
fd = open(LINUX_SYS_STATE_FILE, O_RDONLY);
if (fd < 0) {
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
_exit(SUSPEND_NOT_SUPPORTED);
}
ret = read(fd, buf, sizeof(buf)-1);
if (ret <= 0) {
_exit(SUSPEND_NOT_SUPPORTED);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
buf[ret] = '\0';
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (strstr(buf, sysfile_str)) {
_exit(SUSPEND_SUPPORTED);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
_exit(SUSPEND_NOT_SUPPORTED);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
goto out;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto out;
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
goto out;
}
switch (WEXITSTATUS(status)) {
case SUSPEND_SUPPORTED:
goto out;
case SUSPEND_NOT_SUPPORTED:
error_setg(errp,
"the requested suspend mode is not supported by the guest");
goto out;
default:
error_setg(errp,
"the helper program '%s' returned an unexpected exit status"
" code (%d)", pmutils_path, WEXITSTATUS(status));
goto out;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
out:
g_free(pmutils_path);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
static void guest_suspend(const char *pmutils_bin, const char *sysfile_str,
Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
Error *local_err = NULL;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
char *pmutils_path;
pid_t pid;
int status;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
pmutils_path = g_find_program_in_path(pmutils_bin);
pid = fork();
if (pid == 0) {
/* child */
int fd;
setsid();
reopen_fd_to_null(0);
reopen_fd_to_null(1);
reopen_fd_to_null(2);
if (pmutils_path) {
execle(pmutils_path, pmutils_bin, NULL, environ);
}
/*
* If we get here either pm-utils is not installed or execle() has
* failed. Let's try the manual method if the caller wants it.
*/
if (!sysfile_str) {
_exit(EXIT_FAILURE);
}
fd = open(LINUX_SYS_STATE_FILE, O_WRONLY);
if (fd < 0) {
_exit(EXIT_FAILURE);
}
if (write(fd, sysfile_str, strlen(sysfile_str)) < 0) {
_exit(EXIT_FAILURE);
}
_exit(EXIT_SUCCESS);
} else if (pid < 0) {
error_setg_errno(errp, errno, "failed to create child process");
goto out;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
ga_wait_child(pid, &status, &local_err);
if (local_err) {
error_propagate(errp, local_err);
goto out;
}
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
if (!WIFEXITED(status)) {
error_setg(errp, "child process has terminated abnormally");
goto out;
}
if (WEXITSTATUS(status)) {
error_setg(errp, "child process has failed to suspend");
goto out;
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
out:
g_free(pmutils_path);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
void qmp_guest_suspend_disk(Error **errp)
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
{
Error *local_err = NULL;
bios_supports_mode("pm-is-supported", "--hibernate", "disk", &local_err);
if (local_err) {
error_propagate(errp, local_err);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
return;
}
guest_suspend("pm-hibernate", "disk", errp);
qemu-ga: add guest-suspend-disk As the command name implies, this command suspends the guest to disk. The suspend operation is implemented by two functions: bios_supports_mode() and guest_suspend(). Both functions are generic enough to be used by other suspend modes (introduced by next commits). Both functions will try to use the scripts provided by the pm-utils package if it's available. If it's not available, a manual method, which consists of directly writing to '/sys/power/state', will be used. To reap terminated children, a new signal handler is installed in the parent to catch SIGCHLD signals and a non-blocking call to waitpid() is done to collect their exit statuses. The statuses, however, are discarded. The approach used to query the guest for suspend support deserves some explanation. It's implemented by bios_supports_mode() and shown below: qemu-ga | create pipe | fork() ----------------- | | | | | fork() | -------------------------- | | | | | | | | exec('pm-is-supported') | | | wait() | write exit status to pipe | exit | read pipe This might look complex, but the resulting code is quite simple. The purpose of that approach is to allow qemu-ga to reap its children (semi-)automatically from its SIGCHLD handler. Implementing this the obvious way, that's, doing the exec() call from the first child process, would force us to introduce a more complex way to reap qemu-ga's children. Like registering PIDs to be reaped and having a way to wait for them when returning their exit status to qemu-ga is necessary. The approach explained above avoids that complexity. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-02-28 15:03:03 +01:00
}
void qmp_guest_suspend_ram(Error **errp)
{
Error *local_err = NULL;
bios_supports_mode("pm-is-supported", "--suspend", "mem", &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
guest_suspend("pm-suspend", "mem", errp);
}
void qmp_guest_suspend_hybrid(Error **errp)
{
Error *local_err = NULL;
bios_supports_mode("pm-is-supported", "--suspend-hybrid", NULL,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
guest_suspend("pm-suspend-hybrid", NULL, errp);
}
static GuestNetworkInterfaceList *
guest_find_interface(GuestNetworkInterfaceList *head,
const char *name)
{
for (; head; head = head->next) {
if (strcmp(head->value->name, name) == 0) {
break;
}
}
return head;
}
/*
* Build information about guest interfaces
*/
GuestNetworkInterfaceList *qmp_guest_network_get_interfaces(Error **errp)
{
GuestNetworkInterfaceList *head = NULL, *cur_item = NULL;
struct ifaddrs *ifap, *ifa;
if (getifaddrs(&ifap) < 0) {
error_setg_errno(errp, errno, "getifaddrs failed");
goto error;
}
for (ifa = ifap; ifa; ifa = ifa->ifa_next) {
GuestNetworkInterfaceList *info;
GuestIpAddressList **address_list = NULL, *address_item = NULL;
char addr4[INET_ADDRSTRLEN];
char addr6[INET6_ADDRSTRLEN];
int sock;
struct ifreq ifr;
unsigned char *mac_addr;
void *p;
g_debug("Processing %s interface", ifa->ifa_name);
info = guest_find_interface(head, ifa->ifa_name);
if (!info) {
info = g_malloc0(sizeof(*info));
info->value = g_malloc0(sizeof(*info->value));
info->value->name = g_strdup(ifa->ifa_name);
if (!cur_item) {
head = cur_item = info;
} else {
cur_item->next = info;
cur_item = info;
}
}
if (!info->value->has_hardware_address &&
ifa->ifa_flags & SIOCGIFHWADDR) {
/* we haven't obtained HW address yet */
sock = socket(PF_INET, SOCK_STREAM, 0);
if (sock == -1) {
error_setg_errno(errp, errno, "failed to create socket");
goto error;
}
memset(&ifr, 0, sizeof(ifr));
pstrcpy(ifr.ifr_name, IF_NAMESIZE, info->value->name);
if (ioctl(sock, SIOCGIFHWADDR, &ifr) == -1) {
error_setg_errno(errp, errno,
"failed to get MAC address of %s",
ifa->ifa_name);
close(sock);
goto error;
}
close(sock);
mac_addr = (unsigned char *) &ifr.ifr_hwaddr.sa_data;
info->value->hardware_address =
g_strdup_printf("%02x:%02x:%02x:%02x:%02x:%02x",
(int) mac_addr[0], (int) mac_addr[1],
(int) mac_addr[2], (int) mac_addr[3],
(int) mac_addr[4], (int) mac_addr[5]);
info->value->has_hardware_address = true;
}
if (ifa->ifa_addr &&
ifa->ifa_addr->sa_family == AF_INET) {
/* interface with IPv4 address */
p = &((struct sockaddr_in *)ifa->ifa_addr)->sin_addr;
if (!inet_ntop(AF_INET, p, addr4, sizeof(addr4))) {
error_setg_errno(errp, errno, "inet_ntop failed");
goto error;
}
address_item = g_malloc0(sizeof(*address_item));
address_item->value = g_malloc0(sizeof(*address_item->value));
address_item->value->ip_address = g_strdup(addr4);
address_item->value->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV4;
if (ifa->ifa_netmask) {
/* Count the number of set bits in netmask.
* This is safe as '1' and '0' cannot be shuffled in netmask. */
p = &((struct sockaddr_in *)ifa->ifa_netmask)->sin_addr;
address_item->value->prefix = ctpop32(((uint32_t *) p)[0]);
}
} else if (ifa->ifa_addr &&
ifa->ifa_addr->sa_family == AF_INET6) {
/* interface with IPv6 address */
p = &((struct sockaddr_in6 *)ifa->ifa_addr)->sin6_addr;
if (!inet_ntop(AF_INET6, p, addr6, sizeof(addr6))) {
error_setg_errno(errp, errno, "inet_ntop failed");
goto error;
}
address_item = g_malloc0(sizeof(*address_item));
address_item->value = g_malloc0(sizeof(*address_item->value));
address_item->value->ip_address = g_strdup(addr6);
address_item->value->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV6;
if (ifa->ifa_netmask) {
/* Count the number of set bits in netmask.
* This is safe as '1' and '0' cannot be shuffled in netmask. */
p = &((struct sockaddr_in6 *)ifa->ifa_netmask)->sin6_addr;
address_item->value->prefix =
ctpop32(((uint32_t *) p)[0]) +
ctpop32(((uint32_t *) p)[1]) +
ctpop32(((uint32_t *) p)[2]) +
ctpop32(((uint32_t *) p)[3]);
}
}
if (!address_item) {
continue;
}
address_list = &info->value->ip_addresses;
while (*address_list && (*address_list)->next) {
address_list = &(*address_list)->next;
}
if (!*address_list) {
*address_list = address_item;
} else {
(*address_list)->next = address_item;
}
info->value->has_ip_addresses = true;
}
freeifaddrs(ifap);
return head;
error:
freeifaddrs(ifap);
qapi_free_GuestNetworkInterfaceList(head);
return NULL;
}
#define SYSCONF_EXACT(name, errp) sysconf_exact((name), #name, (errp))
static long sysconf_exact(int name, const char *name_str, Error **errp)
{
long ret;
errno = 0;
ret = sysconf(name);
if (ret == -1) {
if (errno == 0) {
error_setg(errp, "sysconf(%s): value indefinite", name_str);
} else {
error_setg_errno(errp, errno, "sysconf(%s)", name_str);
}
}
return ret;
}
/* Transfer online/offline status between @vcpu and the guest system.
*
* On input either @errp or *@errp must be NULL.
*
* In system-to-@vcpu direction, the following @vcpu fields are accessed:
* - R: vcpu->logical_id
* - W: vcpu->online
* - W: vcpu->can_offline
*
* In @vcpu-to-system direction, the following @vcpu fields are accessed:
* - R: vcpu->logical_id
* - R: vcpu->online
*
* Written members remain unmodified on error.
*/
static void transfer_vcpu(GuestLogicalProcessor *vcpu, bool sys2vcpu,
Error **errp)
{
char *dirpath;
int dirfd;
dirpath = g_strdup_printf("/sys/devices/system/cpu/cpu%" PRId64 "/",
vcpu->logical_id);
dirfd = open(dirpath, O_RDONLY | O_DIRECTORY);
if (dirfd == -1) {
error_setg_errno(errp, errno, "open(\"%s\")", dirpath);
} else {
static const char fn[] = "online";
int fd;
int res;
fd = openat(dirfd, fn, sys2vcpu ? O_RDONLY : O_RDWR);
if (fd == -1) {
if (errno != ENOENT) {
error_setg_errno(errp, errno, "open(\"%s/%s\")", dirpath, fn);
} else if (sys2vcpu) {
vcpu->online = true;
vcpu->can_offline = false;
} else if (!vcpu->online) {
error_setg(errp, "logical processor #%" PRId64 " can't be "
"offlined", vcpu->logical_id);
} /* otherwise pretend successful re-onlining */
} else {
unsigned char status;
res = pread(fd, &status, 1, 0);
if (res == -1) {
error_setg_errno(errp, errno, "pread(\"%s/%s\")", dirpath, fn);
} else if (res == 0) {
error_setg(errp, "pread(\"%s/%s\"): unexpected EOF", dirpath,
fn);
} else if (sys2vcpu) {
vcpu->online = (status != '0');
vcpu->can_offline = true;
} else if (vcpu->online != (status != '0')) {
status = '0' + vcpu->online;
if (pwrite(fd, &status, 1, 0) == -1) {
error_setg_errno(errp, errno, "pwrite(\"%s/%s\")", dirpath,
fn);
}
} /* otherwise pretend successful re-(on|off)-lining */
res = close(fd);
g_assert(res == 0);
}
res = close(dirfd);
g_assert(res == 0);
}
g_free(dirpath);
}
GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp)
{
int64_t current;
GuestLogicalProcessorList *head, **link;
long sc_max;
Error *local_err = NULL;
current = 0;
head = NULL;
link = &head;
sc_max = SYSCONF_EXACT(_SC_NPROCESSORS_CONF, &local_err);
while (local_err == NULL && current < sc_max) {
GuestLogicalProcessor *vcpu;
GuestLogicalProcessorList *entry;
vcpu = g_malloc0(sizeof *vcpu);
vcpu->logical_id = current++;
vcpu->has_can_offline = true; /* lolspeak ftw */
transfer_vcpu(vcpu, true, &local_err);
entry = g_malloc0(sizeof *entry);
entry->value = vcpu;
*link = entry;
link = &entry->next;
}
if (local_err == NULL) {
/* there's no guest with zero VCPUs */
g_assert(head != NULL);
return head;
}
qapi_free_GuestLogicalProcessorList(head);
error_propagate(errp, local_err);
return NULL;
}
int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
{
int64_t processed;
Error *local_err = NULL;
processed = 0;
while (vcpus != NULL) {
transfer_vcpu(vcpus->value, false, &local_err);
if (local_err != NULL) {
break;
}
++processed;
vcpus = vcpus->next;
}
if (local_err != NULL) {
if (processed == 0) {
error_propagate(errp, local_err);
} else {
error_free(local_err);
}
}
return processed;
}
#else /* defined(__linux__) */
void qmp_guest_suspend_disk(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
}
void qmp_guest_suspend_ram(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
}
void qmp_guest_suspend_hybrid(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
}
GuestNetworkInterfaceList *qmp_guest_network_get_interfaces(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return NULL;
}
GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return NULL;
}
int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return -1;
}
#endif
#if !defined(CONFIG_FSFREEZE)
qga: Add guest-get-fsinfo command Add command to get mounted filesystems information in the guest. The returned value contains a list of mountpoint paths and corresponding disks info such as disk bus type, drive address, and the disk controllers' PCI addresses, so that management layer such as libvirt can resolve the disk backends. For example, when `lsblk' result is: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 1G 0 disk `-sdb1 8:17 0 1024M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test sdc 8:32 0 1G 0 disk `-sdc1 8:33 0 512M 0 part `-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test vda 252:0 0 25G 0 disk `-vda1 252:1 0 25G 0 part / where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1, sdc is an IDE disk with PCI controller 0000:00:01.1, and vda is a virtio-blk disk with PCI device 0000:00:06.0, guest-get-fsinfo command will return the following result: {"return": [{"name":"dm-1", "mountpoint":"/mnt/test", "disk":[ {"bus-type":"scsi","bus":0,"unit":1,"target":0, "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}}, {"bus-type":"ide","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}], "type":"xfs"}, {"name":"vda1", "mountpoint":"/", "disk":[ {"bus-type":"virtio","bus":0,"unit":0,"target":0, "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}], "type":"ext4"}]} In Linux guest, the disk information is resolved from sysfs. So far, it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86 hosts, and "disk" parameter may be empty for unsupported disk types. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> *updated schema to report 2.2 as initial supported version Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2014-06-30 23:51:34 +02:00
GuestFilesystemInfoList *qmp_guest_get_fsinfo(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return NULL;
}
GuestFsfreezeStatus qmp_guest_fsfreeze_status(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_freeze(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints,
strList *mountpoints,
Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return 0;
}
int64_t qmp_guest_fsfreeze_thaw(Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
return 0;
}
#endif /* CONFIG_FSFREEZE */
#if !defined(CONFIG_FSTRIM)
void qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp)
{
error_set(errp, QERR_UNSUPPORTED);
}
#endif
/* add unsupported commands to the blacklist */
GList *ga_command_blacklist_init(GList *blacklist)
{
#if !defined(__linux__)
{
const char *list[] = {
"guest-suspend-disk", "guest-suspend-ram",
"guest-suspend-hybrid", "guest-network-get-interfaces",
"guest-get-vcpus", "guest-set-vcpus", NULL};
char **p = (char **)list;
while (*p) {
blacklist = g_list_append(blacklist, *p++);
}
}
#endif
#if !defined(CONFIG_FSFREEZE)
{
const char *list[] = {
"guest-get-fsinfo", "guest-fsfreeze-status",
"guest-fsfreeze-freeze", "guest-fsfreeze-freeze-list",
"guest-fsfreeze-thaw", "guest-get-fsinfo", NULL};
char **p = (char **)list;
while (*p) {
blacklist = g_list_append(blacklist, *p++);
}
}
#endif
#if !defined(CONFIG_FSTRIM)
blacklist = g_list_append(blacklist, (char *)"guest-fstrim");
#endif
return blacklist;
}
/* register init/cleanup routines for stateful command groups */
void ga_command_state_init(GAState *s, GACommandState *cs)
{
#if defined(CONFIG_FSFREEZE)
ga_command_state_add(cs, NULL, guest_fsfreeze_cleanup);
#endif
ga_command_state_add(cs, guest_file_init, NULL);
}