OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
a8d48f59cd
qemu-e2k/include/hw/i2c/aspeed_i2c.h

378 lines
12 KiB
C
Raw Normal View History

i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
/*
* ASPEED AST2400 I2C Controller
*
* Copyright (C) 2016 IBM Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
include: Make headers more self-contained Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-12 07:23:31 +02:00
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
#ifndef ASPEED_I2C_H
#define ASPEED_I2C_H
#include "hw/i2c/i2c.h"
include: Make headers more self-contained Back in 2016, we discussed[1] rules for headers, and these were generally liked: 1. Have a carefully curated header that's included everywhere first. We got that already thanks to Peter: osdep.h. 2. Headers should normally include everything they need beyond osdep.h. If exceptions are needed for some reason, they must be documented in the header. If all that's needed from a header is typedefs, put those into qemu/typedefs.h instead of including the header. 3. Cyclic inclusion is forbidden. This patch gets include/ closer to obeying 2. It's actually extracted from my "[RFC] Baby steps towards saner headers" series[2], which demonstrates a possible path towards checking 2 automatically. It passes the RFC test there. [1] Message-ID: <87h9g8j57d.fsf@blackfin.pond.sub.org> https://lists.nongnu.org/archive/html/qemu-devel/2016-03/msg03345.html [2] Message-Id: <20190711122827.18970-1-armbru@redhat.com> https://lists.nongnu.org/archive/html/qemu-devel/2019-07/msg02715.html Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-2-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-12 07:23:31 +02:00
#include "hw/sysbus.h"
aspeed: i2c: Move regs and helpers to header file Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
#include "hw/registerfields.h"
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
#include "qom/object.h"
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
#define TYPE_ASPEED_I2C "aspeed.i2c"
aspeed/i2c: Introduce an object class per SoC It prepares ground for register differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:40 +02:00
#define TYPE_ASPEED_2400_I2C TYPE_ASPEED_I2C "-ast2400"
#define TYPE_ASPEED_2500_I2C TYPE_ASPEED_I2C "-ast2500"
aspeed/i2c: Add AST2600 support The I2C controller of the AST2400 and AST2500 SoCs have one IRQ shared by all I2C busses. The AST2600 SoC I2C controller has one IRQ per bus and 16 busses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:41 +02:00
#define TYPE_ASPEED_2600_I2C TYPE_ASPEED_I2C "-ast2600"
aspeed/i2c: Add ast1030 controller models Based on : https://lore.kernel.org/qemu-devel/20220324100439.478317-2-troy_lee@aspeedtech.com/ Cc: Troy Lee <troy_lee@aspeedtech.com> Cc: Jamin Lin <jamin_lin@aspeedtech.com> Cc: Steven Lee <steven_lee@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
#define TYPE_ASPEED_1030_I2C TYPE_ASPEED_I2C "-ast1030"
Use OBJECT_DECLARE_TYPE when possible This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-16 20:25:18 +02:00
OBJECT_DECLARE_TYPE(AspeedI2CState, AspeedI2CClass, ASPEED_I2C)
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
aspeed/i2c: Add AST2600 support The I2C controller of the AST2400 and AST2500 SoCs have one IRQ shared by all I2C busses. The AST2600 SoC I2C controller has one IRQ per bus and 16 busses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:41 +02:00
#define ASPEED_I2C_NR_BUSSES 16
aspeed/i2c: Add support for pool buffer transfers The Aspeed I2C controller can operate in different transfer modes : - Byte Buffer mode, using a dedicated register to transfer a byte. This is what the model supports today. - Pool Buffer mode, using an internal SRAM to transfer multiple bytes in the same command sequence. Each SoC has different SRAM characteristics. On the AST2400, 2048 bytes of SRAM are available at offset 0x800 of the controller AHB window. The pool buffer can be configured from 1 to 256 bytes per bus. On the AST2500, the SRAM is at offset 0x200 and the pool buffer is of 16 bytes per bus. On the AST2600, the SRAM is at offset 0xC00 and the pool buffer is of 32 bytes per bus. It can be splitted in two for TX and RX but the current model does not add support for it as it it unused by known drivers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:55 +01:00
#define ASPEED_I2C_MAX_POOL_SIZE 0x800
aspeed: i2c: Use reg array instead of individual vars Using a register array will allow us to represent old-mode and new-mode I2C registers by using the same underlying register array, instead of adding an entire new set of variables to represent new mode. As part of this, we also do additional cleanup to use ARRAY_FIELD_ macros instead of FIELD_ macros on registers. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: Ib94996b17c361b8490c042b43c99d8abc69332e3 [ clg: use of memset in aspeed_i2c_bus_reset() ] Message-Id: <20220331043248.2237838-5-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
#define ASPEED_I2C_OLD_NUM_REG 11
aspeed: i2c: Add new mode support On AST2600, I2C has a secondary mode, called "new mode", which changes the layout of registers, adds some minor behavior changes, and introduces a new way to transfer data called "packet mode". Most of the bit positions of the fields are the same between old and new mode, so we use SHARED_FIELD_XX macros to reuse most of the code between the different modes. For packet mode, most of the command behavior is the same compared to other modes, but there are some minor changes to how interrupts are handled compared to other modes. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e Message-Id: <20220331043248.2237838-6-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
#define ASPEED_I2C_NEW_NUM_REG 22
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
aspeed: i2c: Move regs and helpers to header file Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
/* Tx State Machine */
#define I2CD_TX_STATE_MASK 0xf
#define I2CD_IDLE 0x0
#define I2CD_MACTIVE 0x8
#define I2CD_MSTART 0x9
#define I2CD_MSTARTR 0xa
#define I2CD_MSTOP 0xb
#define I2CD_MTXD 0xc
#define I2CD_MRXACK 0xd
#define I2CD_MRXD 0xe
#define I2CD_MTXACK 0xf
#define I2CD_SWAIT 0x1
#define I2CD_SRXD 0x4
#define I2CD_STXACK 0x5
#define I2CD_STXD 0x6
#define I2CD_SRXACK 0x7
#define I2CD_RECOVER 0x3
/* I2C Global Register */
REG32(I2C_CTRL_STATUS, 0x0) /* Device Interrupt Status */
REG32(I2C_CTRL_ASSIGN, 0x8) /* Device Interrupt Target Assignment */
REG32(I2C_CTRL_GLOBAL, 0xC) /* Global Control Register */
FIELD(I2C_CTRL_GLOBAL, REG_MODE, 2, 1)
FIELD(I2C_CTRL_GLOBAL, SRAM_EN, 0, 1)
REG32(I2C_CTRL_NEW_CLK_DIVIDER, 0x10) /* New mode clock divider */
/* I2C Old Mode Device (Bus) Register */
REG32(I2CD_FUN_CTRL, 0x0) /* I2CD Function Control */
FIELD(I2CD_FUN_CTRL, POOL_PAGE_SEL, 20, 3) /* AST2400 */
SHARED_FIELD(M_SDA_LOCK_EN, 16, 1)
SHARED_FIELD(MULTI_MASTER_DIS, 15, 1)
SHARED_FIELD(M_SCL_DRIVE_EN, 14, 1)
SHARED_FIELD(MSB_STS, 9, 1)
SHARED_FIELD(SDA_DRIVE_IT_EN, 8, 1)
SHARED_FIELD(M_SDA_DRIVE_IT_EN, 7, 1)
SHARED_FIELD(M_HIGH_SPEED_EN, 6, 1)
SHARED_FIELD(DEF_ADDR_EN, 5, 1)
SHARED_FIELD(DEF_ALERT_EN, 4, 1)
SHARED_FIELD(DEF_ARP_EN, 3, 1)
SHARED_FIELD(DEF_GCALL_EN, 2, 1)
SHARED_FIELD(SLAVE_EN, 1, 1)
SHARED_FIELD(MASTER_EN, 0, 1)
REG32(I2CD_AC_TIMING1, 0x04) /* Clock and AC Timing Control #1 */
REG32(I2CD_AC_TIMING2, 0x08) /* Clock and AC Timing Control #2 */
REG32(I2CD_INTR_CTRL, 0x0C) /* I2CD Interrupt Control */
REG32(I2CD_INTR_STS, 0x10) /* I2CD Interrupt Status */
SHARED_FIELD(SLAVE_ADDR_MATCH, 31, 1) /* 0: addr1 1: addr2 */
SHARED_FIELD(SLAVE_ADDR_RX_PENDING, 29, 1)
SHARED_FIELD(SLAVE_INACTIVE_TIMEOUT, 15, 1)
SHARED_FIELD(SDA_DL_TIMEOUT, 14, 1)
SHARED_FIELD(BUS_RECOVER_DONE, 13, 1)
SHARED_FIELD(SMBUS_ALERT, 12, 1) /* Bus [0-3] only */
FIELD(I2CD_INTR_STS, SMBUS_ARP_ADDR, 11, 1) /* Removed */
FIELD(I2CD_INTR_STS, SMBUS_DEV_ALERT_ADDR, 10, 1) /* Removed */
FIELD(I2CD_INTR_STS, SMBUS_DEF_ADDR, 9, 1) /* Removed */
FIELD(I2CD_INTR_STS, GCALL_ADDR, 8, 1) /* Removed */
FIELD(I2CD_INTR_STS, SLAVE_ADDR_RX_MATCH, 7, 1) /* use RX_DONE */
SHARED_FIELD(SCL_TIMEOUT, 6, 1)
SHARED_FIELD(ABNORMAL, 5, 1)
SHARED_FIELD(NORMAL_STOP, 4, 1)
SHARED_FIELD(ARBIT_LOSS, 3, 1)
SHARED_FIELD(RX_DONE, 2, 1)
SHARED_FIELD(TX_NAK, 1, 1)
SHARED_FIELD(TX_ACK, 0, 1)
REG32(I2CD_CMD, 0x14) /* I2CD Command/Status */
SHARED_FIELD(SDA_OE, 28, 1)
SHARED_FIELD(SDA_O, 27, 1)
SHARED_FIELD(SCL_OE, 26, 1)
SHARED_FIELD(SCL_O, 25, 1)
SHARED_FIELD(TX_TIMING, 23, 2)
SHARED_FIELD(TX_STATE, 19, 4)
SHARED_FIELD(SCL_LINE_STS, 18, 1)
SHARED_FIELD(SDA_LINE_STS, 17, 1)
SHARED_FIELD(BUS_BUSY_STS, 16, 1)
SHARED_FIELD(SDA_OE_OUT_DIR, 15, 1)
SHARED_FIELD(SDA_O_OUT_DIR, 14, 1)
SHARED_FIELD(SCL_OE_OUT_DIR, 13, 1)
SHARED_FIELD(SCL_O_OUT_DIR, 12, 1)
SHARED_FIELD(BUS_RECOVER_CMD_EN, 11, 1)
SHARED_FIELD(S_ALT_EN, 10, 1)
/* Command Bits */
SHARED_FIELD(RX_DMA_EN, 9, 1)
SHARED_FIELD(TX_DMA_EN, 8, 1)
SHARED_FIELD(RX_BUFF_EN, 7, 1)
SHARED_FIELD(TX_BUFF_EN, 6, 1)
SHARED_FIELD(M_STOP_CMD, 5, 1)
SHARED_FIELD(M_S_RX_CMD_LAST, 4, 1)
SHARED_FIELD(M_RX_CMD, 3, 1)
SHARED_FIELD(S_TX_CMD, 2, 1)
SHARED_FIELD(M_TX_CMD, 1, 1)
SHARED_FIELD(M_START_CMD, 0, 1)
REG32(I2CD_DEV_ADDR, 0x18) /* Slave Device Address */
REG32(I2CD_POOL_CTRL, 0x1C) /* Pool Buffer Control */
SHARED_FIELD(RX_COUNT, 24, 5)
SHARED_FIELD(RX_SIZE, 16, 5)
SHARED_FIELD(TX_COUNT, 9, 5)
FIELD(I2CD_POOL_CTRL, OFFSET, 2, 6) /* AST2400 */
REG32(I2CD_BYTE_BUF, 0x20) /* Transmit/Receive Byte Buffer */
SHARED_FIELD(RX_BUF, 8, 8)
SHARED_FIELD(TX_BUF, 0, 8)
REG32(I2CD_DMA_ADDR, 0x24) /* DMA Buffer Address */
REG32(I2CD_DMA_LEN, 0x28) /* DMA Transfer Length < 4KB */
/* I2C New Mode Device (Bus) Register */
REG32(I2CC_FUN_CTRL, 0x0)
FIELD(I2CC_FUN_CTRL, RB_EARLY_DONE_EN, 22, 1)
FIELD(I2CC_FUN_CTRL, DMA_DIS_AUTO_RECOVER, 21, 1)
FIELD(I2CC_FUN_CTRL, S_SAVE_ADDR, 20, 1)
FIELD(I2CC_FUN_CTRL, M_PKT_RETRY_CNT, 18, 2)
/* 17:0 shared with I2CD_FUN_CTRL[17:0] */
REG32(I2CC_AC_TIMING, 0x04)
REG32(I2CC_MS_TXRX_BYTE_BUF, 0x08)
/* 31:16 shared with I2CD_CMD[31:16] */
/* 15:0 shared with I2CD_BYTE_BUF[15:0] */
REG32(I2CC_POOL_CTRL, 0x0c)
/* 31:0 shared with I2CD_POOL_CTRL[31:0] */
REG32(I2CM_INTR_CTRL, 0x10)
REG32(I2CM_INTR_STS, 0x14)
FIELD(I2CM_INTR_STS, PKT_STATE, 28, 4)
FIELD(I2CM_INTR_STS, PKT_CMD_TIMEOUT, 18, 1)
FIELD(I2CM_INTR_STS, PKT_CMD_FAIL, 17, 1)
FIELD(I2CM_INTR_STS, PKT_CMD_DONE, 16, 1)
FIELD(I2CM_INTR_STS, BUS_RECOVER_FAIL, 15, 1)
/* 14:0 shared with I2CD_INTR_STS[14:0] */
REG32(I2CM_CMD, 0x18)
FIELD(I2CM_CMD, W1_CTRL, 31, 1)
FIELD(I2CM_CMD, PKT_DEV_ADDR, 24, 7)
FIELD(I2CM_CMD, HS_MASTER_MODE_LSB, 17, 3)
FIELD(I2CM_CMD, PKT_OP_EN, 16, 1)
/* 15:0 shared with I2CD_CMD[15:0] */
REG32(I2CM_DMA_LEN, 0x1c)
FIELD(I2CM_DMA_LEN, RX_BUF_LEN_W1T, 31, 1)
FIELD(I2CM_DMA_LEN, RX_BUF_LEN, 16, 11)
FIELD(I2CM_DMA_LEN, TX_BUF_LEN_W1T, 15, 1)
FIELD(I2CM_DMA_LEN, TX_BUF_LEN, 0, 11)
REG32(I2CS_INTR_CTRL, 0x20)
REG32(I2CS_INTR_STS, 0x24)
/* 31:29 shared with I2CD_INTR_STS[31:29] */
FIELD(I2CS_INTR_STS, SLAVE_PARKING_STS, 24, 2)
FIELD(I2CS_INTR_STS, SLAVE_ADDR3_NAK, 22, 1)
FIELD(I2CS_INTR_STS, SLAVE_ADDR2_NAK, 21, 1)
FIELD(I2CS_INTR_STS, SLAVE_ADDR1_NAK, 20, 1)
FIELD(I2CS_INTR_STS, SLAVE_ADDR_INDICATOR, 18, 2)
FIELD(I2CS_INTR_STS, PKT_CMD_FAIL, 17, 1)
FIELD(I2CS_INTR_STS, PKT_CMD_DONE, 16, 1)
/* 14:0 shared with I2CD_INTR_STS[14:0] */
REG32(I2CS_CMD, 0x28)
FIELD(I2CS_CMD, W1_CTRL, 31, 1)
FIELD(I2CS_CMD, PKT_MODE_ACTIVE_ADDR, 17, 2)
FIELD(I2CS_CMD, PKT_MODE_EN, 16, 1)
FIELD(I2CS_CMD, AUTO_NAK_INACTIVE_ADDR, 15, 1)
FIELD(I2CS_CMD, AUTO_NAK_ACTIVE_ADDR, 14, 1)
/* 13:0 shared with I2CD_CMD[13:0] */
REG32(I2CS_DMA_LEN, 0x2c)
FIELD(I2CS_DMA_LEN, RX_BUF_LEN_W1T, 31, 1)
FIELD(I2CS_DMA_LEN, RX_BUF_LEN, 16, 11)
FIELD(I2CS_DMA_LEN, TX_BUF_LEN_W1T, 15, 1)
FIELD(I2CS_DMA_LEN, TX_BUF_LEN, 0, 11)
REG32(I2CM_DMA_TX_ADDR, 0x30)
FIELD(I2CM_DMA_TX_ADDR, ADDR, 0, 31)
REG32(I2CM_DMA_RX_ADDR, 0x34)
FIELD(I2CM_DMA_RX_ADDR, ADDR, 0, 31)
REG32(I2CS_DMA_TX_ADDR, 0x38)
FIELD(I2CS_DMA_TX_ADDR, ADDR, 0, 31)
REG32(I2CS_DMA_RX_ADDR, 0x3c)
FIELD(I2CS_DMA_RX_ADDR, ADDR, 0, 31)
REG32(I2CS_DEV_ADDR, 0x40)
REG32(I2CM_DMA_LEN_STS, 0x48)
FIELD(I2CM_DMA_LEN_STS, RX_LEN, 16, 13)
FIELD(I2CM_DMA_LEN_STS, TX_LEN, 0, 13)
REG32(I2CS_DMA_LEN_STS, 0x4c)
FIELD(I2CS_DMA_LEN_STS, RX_LEN, 16, 13)
FIELD(I2CS_DMA_LEN_STS, TX_LEN, 0, 13)
REG32(I2CC_DMA_ADDR, 0x50)
REG32(I2CC_DMA_LEN, 0x54)
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
struct AspeedI2CState;
aspeed/i2c: QOMify AspeedI2CBus Introduce an AspeedI2CBus SysBusDevice model and attach the associated memory region and IRQ to the newly instantiated objects. Before this change, the I2C bus IRQs were all attached to the SysBusDevice model of the I2C controller. Adapt the AST2600 SoC realize routine to take into account this change. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12 08:20:08 +02:00
#define TYPE_ASPEED_I2C_BUS "aspeed.i2c.bus"
OBJECT_DECLARE_SIMPLE_TYPE(AspeedI2CBus, ASPEED_I2C_BUS)
struct AspeedI2CBus {
SysBusDevice parent_obj;
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
struct AspeedI2CState *controller;
hw/i2c/aspeed: add slave device in old register mode Add slave mode functionality for the Aspeed I2C controller in old register mode. This is implemented by realizing an I2C slave device owned by the I2C controller and attached to its own bus. The I2C slave device only implements asynchronous sends on the bus, so slaves not supporting that will not be able to communicate with it. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: checkpatch fixes ] Message-Id: <20220601210831.67259-6-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-7-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
/* slave mode */
I2CSlave *slave;
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
MemoryRegion mr;
I2CBus *bus;
uint8_t id;
aspeed/i2c: Add AST2600 support The I2C controller of the AST2400 and AST2500 SoCs have one IRQ shared by all I2C busses. The AST2600 SoC I2C controller has one IRQ per bus and 16 busses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:41 +02:00
qemu_irq irq;
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
aspeed: i2c: Add new mode support On AST2600, I2C has a secondary mode, called "new mode", which changes the layout of registers, adds some minor behavior changes, and introduces a new way to transfer data called "packet mode". Most of the bit positions of the fields are the same between old and new mode, so we use SHARED_FIELD_XX macros to reuse most of the code between the different modes. For packet mode, most of the command behavior is the same compared to other modes, but there are some minor changes to how interrupts are handled compared to other modes. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e Message-Id: <20220331043248.2237838-6-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
uint32_t regs[ASPEED_I2C_NEW_NUM_REG];
aspeed/i2c: QOMify AspeedI2CBus Introduce an AspeedI2CBus SysBusDevice model and attach the associated memory region and IRQ to the newly instantiated objects. Before this change, the I2C bus IRQs were all attached to the SysBusDevice model of the I2C controller. Adapt the AST2600 SoC realize routine to take into account this change. Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-12 08:20:08 +02:00
};
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
struct AspeedI2CState {
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
SysBusDevice parent_obj;
MemoryRegion iomem;
qemu_irq irq;
uint32_t intr_status;
aspeed/i2c: Check SRAM enablement on AST2500 The SRAM must be enabled before using the Buffer Pool mode or the DMA mode. This is not required on other SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:56 +01:00
uint32_t ctrl_global;
aspeed: i2c: Add new mode support On AST2600, I2C has a secondary mode, called "new mode", which changes the layout of registers, adds some minor behavior changes, and introduces a new way to transfer data called "packet mode". Most of the bit positions of the fields are the same between old and new mode, so we use SHARED_FIELD_XX macros to reuse most of the code between the different modes. For packet mode, most of the command behavior is the same compared to other modes, but there are some minor changes to how interrupts are handled compared to other modes. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I072f8301964f623afc74af1fe50c12e5caef199e Message-Id: <20220331043248.2237838-6-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
uint32_t new_clk_divider;
aspeed/i2c: Add support for pool buffer transfers The Aspeed I2C controller can operate in different transfer modes : - Byte Buffer mode, using a dedicated register to transfer a byte. This is what the model supports today. - Pool Buffer mode, using an internal SRAM to transfer multiple bytes in the same command sequence. Each SoC has different SRAM characteristics. On the AST2400, 2048 bytes of SRAM are available at offset 0x800 of the controller AHB window. The pool buffer can be configured from 1 to 256 bytes per bus. On the AST2500, the SRAM is at offset 0x200 and the pool buffer is of 16 bytes per bus. On the AST2600, the SRAM is at offset 0xC00 and the pool buffer is of 32 bytes per bus. It can be splitted in two for TX and RX but the current model does not add support for it as it it unused by known drivers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:55 +01:00
MemoryRegion pool_iomem;
uint8_t pool[ASPEED_I2C_MAX_POOL_SIZE];
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
AspeedI2CBus busses[ASPEED_I2C_NR_BUSSES];
aspeed/i2c: Add support for DMA transfers The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA transfers to and from DRAM. A pair of registers defines the buffer address and the length of the DMA transfer. The address should be aligned on 4 bytes and the maximum length should not exceed 4K. The receive or transmit DMA transfer can then be initiated with specific bits in the Command/Status register of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:58 +01:00
MemoryRegion *dram_mr;
AddressSpace dram_as;
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
};
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
hw/i2c/aspeed: add slave device in old register mode Add slave mode functionality for the Aspeed I2C controller in old register mode. This is implemented by realizing an I2C slave device owned by the I2C controller and attached to its own bus. The I2C slave device only implements asynchronous sends on the bus, so slaves not supporting that will not be able to communicate with it. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: checkpatch fixes ] Message-Id: <20220601210831.67259-6-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-7-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:14 +02:00
#define TYPE_ASPEED_I2C_BUS_SLAVE "aspeed.i2c.slave"
OBJECT_DECLARE_SIMPLE_TYPE(AspeedI2CBusSlave, ASPEED_I2C_BUS_SLAVE)
struct AspeedI2CBusSlave {
I2CSlave i2c;
};
aspeed/i2c: Introduce an object class per SoC It prepares ground for register differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:40 +02:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
struct AspeedI2CClass {
aspeed/i2c: Introduce an object class per SoC It prepares ground for register differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:40 +02:00
SysBusDeviceClass parent_class;
uint8_t num_busses;
uint8_t reg_size;
uint8_t gap;
aspeed/i2c: Add AST2600 support The I2C controller of the AST2400 and AST2500 SoCs have one IRQ shared by all I2C busses. The AST2600 SoC I2C controller has one IRQ per bus and 16 busses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:41 +02:00
qemu_irq (*bus_get_irq)(AspeedI2CBus *);
aspeed/i2c: Add support for pool buffer transfers The Aspeed I2C controller can operate in different transfer modes : - Byte Buffer mode, using a dedicated register to transfer a byte. This is what the model supports today. - Pool Buffer mode, using an internal SRAM to transfer multiple bytes in the same command sequence. Each SoC has different SRAM characteristics. On the AST2400, 2048 bytes of SRAM are available at offset 0x800 of the controller AHB window. The pool buffer can be configured from 1 to 256 bytes per bus. On the AST2500, the SRAM is at offset 0x200 and the pool buffer is of 16 bytes per bus. On the AST2600, the SRAM is at offset 0xC00 and the pool buffer is of 32 bytes per bus. It can be splitted in two for TX and RX but the current model does not add support for it as it it unused by known drivers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:55 +01:00
uint64_t pool_size;
hwaddr pool_base;
uint8_t *(*bus_pool_base)(AspeedI2CBus *);
aspeed/i2c: Check SRAM enablement on AST2500 The SRAM must be enabled before using the Buffer Pool mode or the DMA mode. This is not required on other SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:56 +01:00
bool check_sram;
aspeed/i2c: Add support for DMA transfers The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA transfers to and from DRAM. A pair of registers defines the buffer address and the length of the DMA transfer. The address should be aligned on 4 bytes and the maximum length should not exceed 4K. The receive or transmit DMA transfer can then be initiated with specific bits in the Command/Status register of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:58 +01:00
bool has_dma;
aspeed/i2c: Check SRAM enablement on AST2500 The SRAM must be enabled before using the Buffer Pool mode or the DMA mode. This is not required on other SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-19 15:11:56 +01:00
Move QOM typedefs and add missing includes Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03 22:43:22 +02:00
};
aspeed/i2c: Introduce an object class per SoC It prepares ground for register differences between SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-16-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-25 16:32:40 +02:00
aspeed: i2c: Move regs and helpers to header file Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
static inline bool aspeed_i2c_is_new_mode(AspeedI2CState *s)
{
return FIELD_EX32(s->ctrl_global, I2C_CTRL_GLOBAL, REG_MODE);
}
static inline bool aspeed_i2c_bus_pkt_mode_en(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return ARRAY_FIELD_EX32(bus->regs, I2CM_CMD, PKT_OP_EN);
}
return false;
}
static inline uint32_t aspeed_i2c_bus_ctrl_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CC_FUN_CTRL;
}
return R_I2CD_FUN_CTRL;
}
static inline uint32_t aspeed_i2c_bus_cmd_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CM_CMD;
}
return R_I2CD_CMD;
}
hw/i2c/aspeed: add DEV_ADDR in old register mode Add support for writing and reading the device address register in old register mode. On the AST2400 (only 1 slave address) * no upper bits On the AST2500 (2 possible slave addresses), * bit[31] : Slave Address match indicator * bit[30] : Slave Address Receiving pending On the AST2600 (3 possible slave addresses), * bit[31-30] : Slave Address match indicator * bit[29] : Slave Address Receiving pending The model could be more precise to take into account all fields but since the Linux driver is masking the register value being set, it should be fine. See commit 3fb2e2aeafb2 ("i2c: aspeed: disable additional device addresses on ast2[56]xx") from Zeiv. This can be addressed later. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [ clg: add details to commit log ] Message-Id: <20220601210831.67259-3-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
static inline uint32_t aspeed_i2c_bus_dev_addr_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CS_DEV_ADDR;
}
return R_I2CD_DEV_ADDR;
}
aspeed: i2c: Move regs and helpers to header file Moves register definitions and short commonly used inlined functiosn to the header file to help tidy up the implementation file. Signed-off-by: Joe Komlodi <komlodi@google.com> Change-Id: I34dff7485b6bbe3c9482715ccd94dbd65dc5f324 Message-Id: <20220331043248.2237838-8-komlodi@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-13 14:05:48 +02:00
static inline uint32_t aspeed_i2c_bus_intr_ctrl_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CM_INTR_CTRL;
}
return R_I2CD_INTR_CTRL;
}
static inline uint32_t aspeed_i2c_bus_intr_sts_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CM_INTR_STS;
}
return R_I2CD_INTR_STS;
}
static inline uint32_t aspeed_i2c_bus_pool_ctrl_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CC_POOL_CTRL;
}
return R_I2CD_POOL_CTRL;
}
static inline uint32_t aspeed_i2c_bus_byte_buf_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CC_MS_TXRX_BYTE_BUF;
}
return R_I2CD_BYTE_BUF;
}
static inline uint32_t aspeed_i2c_bus_dma_len_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CC_DMA_LEN;
}
return R_I2CD_DMA_LEN;
}
static inline uint32_t aspeed_i2c_bus_dma_addr_offset(AspeedI2CBus *bus)
{
if (aspeed_i2c_is_new_mode(bus->controller)) {
return R_I2CC_DMA_ADDR;
}
return R_I2CD_DMA_ADDR;
}
static inline bool aspeed_i2c_bus_is_master(AspeedI2CBus *bus)
{
return SHARED_ARRAY_FIELD_EX32(bus->regs, aspeed_i2c_bus_ctrl_offset(bus),
MASTER_EN);
}
static inline bool aspeed_i2c_bus_is_enabled(AspeedI2CBus *bus)
{
uint32_t ctrl_reg = aspeed_i2c_bus_ctrl_offset(bus);
return SHARED_ARRAY_FIELD_EX32(bus->regs, ctrl_reg, MASTER_EN) ||
SHARED_ARRAY_FIELD_EX32(bus->regs, ctrl_reg, SLAVE_EN);
}
hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus() All the callers of aspeed_i2c_get_bus() have a AspeedI2CState and cast it to a DeviceState with DEVICE(), then aspeed_i2c_get_bus() cast the DeviceState to an AspeedI2CState with ASPEED_I2C()... Simplify aspeed_i2c_get_bus() callers by using AspeedI2CState argument. Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200705224154.16917-2-f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-06 00:41:50 +02:00
I2CBus *aspeed_i2c_get_bus(AspeedI2CState *s, int busnr);
i2c: add aspeed i2c controller The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06 17:59:29 +02:00
#endif /* ASPEED_I2C_H */
Reference in New Issue Copy Permalink