qemu-e2k/hw/pci-host/pnv_phb3.c

1203 lines
34 KiB
C
Raw Normal View History

/*
* QEMU PowerPC PowerNV (POWER8) PHB3 model
*
* Copyright (c) 2014-2020, IBM Corporation.
*
* This code is licensed under the GPL version 2 or later. See the
* COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qapi/visitor.h"
#include "qapi/error.h"
#include "hw/pci-host/pnv_phb3_regs.h"
#include "hw/pci-host/pnv_phb3.h"
#include "hw/pci/pcie_host.h"
#include "hw/pci/pcie_port.h"
#include "hw/ppc/pnv.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "qom/object.h"
#include "sysemu/sysemu.h"
#define phb3_error(phb, fmt, ...) \
qemu_log_mask(LOG_GUEST_ERROR, "phb3[%d:%d]: " fmt "\n", \
(phb)->chip_id, (phb)->phb_id, ## __VA_ARGS__)
static PCIDevice *pnv_phb3_find_cfg_dev(PnvPHB3 *phb)
{
PCIHostState *pci = PCI_HOST_BRIDGE(phb);
uint64_t addr = phb->regs[PHB_CONFIG_ADDRESS >> 3];
uint8_t bus, devfn;
if (!(addr >> 63)) {
return NULL;
}
bus = (addr >> 52) & 0xff;
devfn = (addr >> 44) & 0xff;
return pci_find_device(pci->bus, bus, devfn);
}
/*
* The CONFIG_DATA register expects little endian accesses, but as the
* region is big endian, we have to swap the value.
*/
static void pnv_phb3_config_write(PnvPHB3 *phb, unsigned off,
unsigned size, uint64_t val)
{
uint32_t cfg_addr, limit;
PCIDevice *pdev;
pdev = pnv_phb3_find_cfg_dev(phb);
if (!pdev) {
return;
}
cfg_addr = (phb->regs[PHB_CONFIG_ADDRESS >> 3] >> 32) & 0xffc;
cfg_addr |= off;
limit = pci_config_size(pdev);
if (limit <= cfg_addr) {
/*
* conventional pci device can be behind pcie-to-pci bridge.
* 256 <= addr < 4K has no effects.
*/
return;
}
switch (size) {
case 1:
break;
case 2:
val = bswap16(val);
break;
case 4:
val = bswap32(val);
break;
default:
g_assert_not_reached();
}
pci_host_config_write_common(pdev, cfg_addr, limit, val, size);
}
static uint64_t pnv_phb3_config_read(PnvPHB3 *phb, unsigned off,
unsigned size)
{
uint32_t cfg_addr, limit;
PCIDevice *pdev;
uint64_t val;
pdev = pnv_phb3_find_cfg_dev(phb);
if (!pdev) {
return ~0ull;
}
cfg_addr = (phb->regs[PHB_CONFIG_ADDRESS >> 3] >> 32) & 0xffc;
cfg_addr |= off;
limit = pci_config_size(pdev);
if (limit <= cfg_addr) {
/*
* conventional pci device can be behind pcie-to-pci bridge.
* 256 <= addr < 4K has no effects.
*/
return ~0ull;
}
val = pci_host_config_read_common(pdev, cfg_addr, limit, size);
switch (size) {
case 1:
return val;
case 2:
return bswap16(val);
case 4:
return bswap32(val);
default:
g_assert_not_reached();
}
}
static void pnv_phb3_check_m32(PnvPHB3 *phb)
{
uint64_t base, start, size;
MemoryRegion *parent;
PnvPBCQState *pbcq = &phb->pbcq;
if (memory_region_is_mapped(&phb->mr_m32)) {
memory_region_del_subregion(phb->mr_m32.container, &phb->mr_m32);
}
if (!(phb->regs[PHB_PHB3_CONFIG >> 3] & PHB_PHB3C_M32_EN)) {
return;
}
/* Grab geometry from registers */
base = phb->regs[PHB_M32_BASE_ADDR >> 3];
start = phb->regs[PHB_M32_START_ADDR >> 3];
size = ~(phb->regs[PHB_M32_BASE_MASK >> 3] | 0xfffc000000000000ull) + 1;
/* Check if it matches an enabled MMIO region in the PBCQ */
if (memory_region_is_mapped(&pbcq->mmbar0) &&
base >= pbcq->mmio0_base &&
(base + size) <= (pbcq->mmio0_base + pbcq->mmio0_size)) {
parent = &pbcq->mmbar0;
base -= pbcq->mmio0_base;
} else if (memory_region_is_mapped(&pbcq->mmbar1) &&
base >= pbcq->mmio1_base &&
(base + size) <= (pbcq->mmio1_base + pbcq->mmio1_size)) {
parent = &pbcq->mmbar1;
base -= pbcq->mmio1_base;
} else {
return;
}
/* Create alias */
memory_region_init_alias(&phb->mr_m32, OBJECT(phb), "phb3-m32",
&phb->pci_mmio, start, size);
memory_region_add_subregion(parent, base, &phb->mr_m32);
}
static void pnv_phb3_check_m64(PnvPHB3 *phb, uint32_t index)
{
uint64_t base, start, size, m64;
MemoryRegion *parent;
PnvPBCQState *pbcq = &phb->pbcq;
if (memory_region_is_mapped(&phb->mr_m64[index])) {
/* Should we destroy it in RCU friendly way... ? */
memory_region_del_subregion(phb->mr_m64[index].container,
&phb->mr_m64[index]);
}
/* Get table entry */
m64 = phb->ioda_M64BT[index];
if (!(m64 & IODA2_M64BT_ENABLE)) {
return;
}
/* Grab geometry from registers */
base = GETFIELD(IODA2_M64BT_BASE, m64) << 20;
if (m64 & IODA2_M64BT_SINGLE_PE) {
base &= ~0x1ffffffull;
}
size = GETFIELD(IODA2_M64BT_MASK, m64) << 20;
size |= 0xfffc000000000000ull;
size = ~size + 1;
start = base | (phb->regs[PHB_M64_UPPER_BITS >> 3]);
/* Check if it matches an enabled MMIO region in the PBCQ */
if (memory_region_is_mapped(&pbcq->mmbar0) &&
base >= pbcq->mmio0_base &&
(base + size) <= (pbcq->mmio0_base + pbcq->mmio0_size)) {
parent = &pbcq->mmbar0;
base -= pbcq->mmio0_base;
} else if (memory_region_is_mapped(&pbcq->mmbar1) &&
base >= pbcq->mmio1_base &&
(base + size) <= (pbcq->mmio1_base + pbcq->mmio1_size)) {
parent = &pbcq->mmbar1;
base -= pbcq->mmio1_base;
} else {
return;
}
/* Create alias */
memory_region_init_alias(&phb->mr_m64[index], OBJECT(phb), "phb3-m64",
&phb->pci_mmio, start, size);
memory_region_add_subregion(parent, base, &phb->mr_m64[index]);
}
static void pnv_phb3_check_all_m64s(PnvPHB3 *phb)
{
uint64_t i;
for (i = 0; i < PNV_PHB3_NUM_M64; i++) {
pnv_phb3_check_m64(phb, i);
}
}
static void pnv_phb3_lxivt_write(PnvPHB3 *phb, unsigned idx, uint64_t val)
{
uint8_t server, prio;
phb->ioda_LXIVT[idx] = val & (IODA2_LXIVT_SERVER |
IODA2_LXIVT_PRIORITY |
IODA2_LXIVT_NODE_ID);
server = GETFIELD(IODA2_LXIVT_SERVER, val);
prio = GETFIELD(IODA2_LXIVT_PRIORITY, val);
/*
* The low order 2 bits are the link pointer (Type II interrupts).
* Shift back to get a valid IRQ server.
*/
server >>= 2;
ics_write_xive(&phb->lsis, idx, server, prio, prio);
}
static uint64_t *pnv_phb3_ioda_access(PnvPHB3 *phb,
unsigned *out_table, unsigned *out_idx)
{
uint64_t adreg = phb->regs[PHB_IODA_ADDR >> 3];
unsigned int index = GETFIELD(PHB_IODA_AD_TADR, adreg);
unsigned int table = GETFIELD(PHB_IODA_AD_TSEL, adreg);
unsigned int mask;
uint64_t *tptr = NULL;
switch (table) {
case IODA2_TBL_LIST:
tptr = phb->ioda_LIST;
mask = 7;
break;
case IODA2_TBL_LXIVT:
tptr = phb->ioda_LXIVT;
mask = 7;
break;
case IODA2_TBL_IVC_CAM:
case IODA2_TBL_RBA:
mask = 31;
break;
case IODA2_TBL_RCAM:
mask = 63;
break;
case IODA2_TBL_MRT:
mask = 7;
break;
case IODA2_TBL_PESTA:
case IODA2_TBL_PESTB:
mask = 255;
break;
case IODA2_TBL_TVT:
tptr = phb->ioda_TVT;
mask = 511;
break;
case IODA2_TBL_TCAM:
case IODA2_TBL_TDR:
mask = 63;
break;
case IODA2_TBL_M64BT:
tptr = phb->ioda_M64BT;
mask = 15;
break;
case IODA2_TBL_M32DT:
tptr = phb->ioda_MDT;
mask = 255;
break;
case IODA2_TBL_PEEV:
tptr = phb->ioda_PEEV;
mask = 3;
break;
default:
phb3_error(phb, "invalid IODA table %d", table);
return NULL;
}
index &= mask;
if (out_idx) {
*out_idx = index;
}
if (out_table) {
*out_table = table;
}
if (tptr) {
tptr += index;
}
if (adreg & PHB_IODA_AD_AUTOINC) {
index = (index + 1) & mask;
adreg = SETFIELD(PHB_IODA_AD_TADR, adreg, index);
}
phb->regs[PHB_IODA_ADDR >> 3] = adreg;
return tptr;
}
static uint64_t pnv_phb3_ioda_read(PnvPHB3 *phb)
{
unsigned table;
uint64_t *tptr;
tptr = pnv_phb3_ioda_access(phb, &table, NULL);
if (!tptr) {
/* Return 0 on unsupported tables, not ff's */
return 0;
}
return *tptr;
}
static void pnv_phb3_ioda_write(PnvPHB3 *phb, uint64_t val)
{
unsigned table, idx;
uint64_t *tptr;
tptr = pnv_phb3_ioda_access(phb, &table, &idx);
if (!tptr) {
return;
}
/* Handle side effects */
switch (table) {
case IODA2_TBL_LXIVT:
pnv_phb3_lxivt_write(phb, idx, val);
break;
case IODA2_TBL_M64BT:
*tptr = val;
pnv_phb3_check_m64(phb, idx);
break;
default:
*tptr = val;
}
}
/*
* This is called whenever the PHB LSI, MSI source ID register or
* the PBCQ irq filters are written.
*/
void pnv_phb3_remap_irqs(PnvPHB3 *phb)
{
ICSState *ics = &phb->lsis;
uint32_t local, global, count, mask, comp;
uint64_t baren;
PnvPBCQState *pbcq = &phb->pbcq;
/*
* First check if we are enabled. Unlike real HW we don't separate
* TX and RX so we enable if both are set
*/
baren = pbcq->nest_regs[PBCQ_NEST_BAR_EN];
if (!(baren & PBCQ_NEST_BAR_EN_IRSN_RX) ||
!(baren & PBCQ_NEST_BAR_EN_IRSN_TX)) {
ics->offset = 0;
return;
}
/* Grab local LSI source ID */
local = GETFIELD(PHB_LSI_SRC_ID, phb->regs[PHB_LSI_SOURCE_ID >> 3]) << 3;
/* Grab global one and compare */
global = GETFIELD(PBCQ_NEST_LSI_SRC,
pbcq->nest_regs[PBCQ_NEST_LSI_SRC_ID]) << 3;
if (global != local) {
/*
* This happens during initialization, let's come back when we
* are properly configured
*/
ics->offset = 0;
return;
}
/* Get the base on the powerbus */
comp = GETFIELD(PBCQ_NEST_IRSN_COMP,
pbcq->nest_regs[PBCQ_NEST_IRSN_COMPARE]);
mask = GETFIELD(PBCQ_NEST_IRSN_COMP,
pbcq->nest_regs[PBCQ_NEST_IRSN_MASK]);
count = ((~mask) + 1) & 0x7ffff;
phb->total_irq = count;
/* Sanity checks */
if ((global + PNV_PHB3_NUM_LSI) > count) {
phb3_error(phb, "LSIs out of reach: LSI base=%d total irq=%d", global,
count);
}
if (count > 2048) {
phb3_error(phb, "More interrupts than supported: %d", count);
}
if ((comp & mask) != comp) {
phb3_error(phb, "IRQ compare bits not in mask: comp=0x%x mask=0x%x",
comp, mask);
comp &= mask;
}
/* Setup LSI offset */
ics->offset = comp + global;
/* Setup MSI offset */
pnv_phb3_msi_update_config(&phb->msis, comp, count - PNV_PHB3_NUM_LSI);
}
static void pnv_phb3_lsi_src_id_write(PnvPHB3 *phb, uint64_t val)
{
/* Sanitize content */
val &= PHB_LSI_SRC_ID;
phb->regs[PHB_LSI_SOURCE_ID >> 3] = val;
pnv_phb3_remap_irqs(phb);
}
static void pnv_phb3_rtc_invalidate(PnvPHB3 *phb, uint64_t val)
{
PnvPhb3DMASpace *ds;
/* Always invalidate all for now ... */
QLIST_FOREACH(ds, &phb->dma_spaces, list) {
ds->pe_num = PHB_INVALID_PE;
}
}
static void pnv_phb3_update_msi_regions(PnvPhb3DMASpace *ds)
{
uint64_t cfg = ds->phb->regs[PHB_PHB3_CONFIG >> 3];
if (cfg & PHB_PHB3C_32BIT_MSI_EN) {
if (!memory_region_is_mapped(&ds->msi32_mr)) {
memory_region_add_subregion(MEMORY_REGION(&ds->dma_mr),
0xffff0000, &ds->msi32_mr);
}
} else {
if (memory_region_is_mapped(&ds->msi32_mr)) {
memory_region_del_subregion(MEMORY_REGION(&ds->dma_mr),
&ds->msi32_mr);
}
}
if (cfg & PHB_PHB3C_64BIT_MSI_EN) {
if (!memory_region_is_mapped(&ds->msi64_mr)) {
memory_region_add_subregion(MEMORY_REGION(&ds->dma_mr),
(1ull << 60), &ds->msi64_mr);
}
} else {
if (memory_region_is_mapped(&ds->msi64_mr)) {
memory_region_del_subregion(MEMORY_REGION(&ds->dma_mr),
&ds->msi64_mr);
}
}
}
static void pnv_phb3_update_all_msi_regions(PnvPHB3 *phb)
{
PnvPhb3DMASpace *ds;
QLIST_FOREACH(ds, &phb->dma_spaces, list) {
pnv_phb3_update_msi_regions(ds);
}
}
void pnv_phb3_reg_write(void *opaque, hwaddr off, uint64_t val, unsigned size)
{
PnvPHB3 *phb = opaque;
bool changed;
/* Special case configuration data */
if ((off & 0xfffc) == PHB_CONFIG_DATA) {
pnv_phb3_config_write(phb, off & 0x3, size, val);
return;
}
/* Other registers are 64-bit only */
if (size != 8 || off & 0x7) {
phb3_error(phb, "Invalid register access, offset: 0x%"PRIx64" size: %d",
off, size);
return;
}
/* Handle masking & filtering */
switch (off) {
case PHB_M64_UPPER_BITS:
val &= 0xfffc000000000000ull;
break;
case PHB_Q_DMA_R:
/*
* This is enough logic to make SW happy but we aren't actually
* quiescing the DMAs
*/
if (val & PHB_Q_DMA_R_AUTORESET) {
val = 0;
} else {
val &= PHB_Q_DMA_R_QUIESCE_DMA;
}
break;
/* LEM stuff */
case PHB_LEM_FIR_AND_MASK:
phb->regs[PHB_LEM_FIR_ACCUM >> 3] &= val;
return;
case PHB_LEM_FIR_OR_MASK:
phb->regs[PHB_LEM_FIR_ACCUM >> 3] |= val;
return;
case PHB_LEM_ERROR_AND_MASK:
phb->regs[PHB_LEM_ERROR_MASK >> 3] &= val;
return;
case PHB_LEM_ERROR_OR_MASK:
phb->regs[PHB_LEM_ERROR_MASK >> 3] |= val;
return;
case PHB_LEM_WOF:
val = 0;
break;
}
/* Record whether it changed */
changed = phb->regs[off >> 3] != val;
/* Store in register cache first */
phb->regs[off >> 3] = val;
/* Handle side effects */
switch (off) {
case PHB_PHB3_CONFIG:
if (changed) {
pnv_phb3_update_all_msi_regions(phb);
}
/* fall through */
case PHB_M32_BASE_ADDR:
case PHB_M32_BASE_MASK:
case PHB_M32_START_ADDR:
if (changed) {
pnv_phb3_check_m32(phb);
}
break;
case PHB_M64_UPPER_BITS:
if (changed) {
pnv_phb3_check_all_m64s(phb);
}
break;
case PHB_LSI_SOURCE_ID:
if (changed) {
pnv_phb3_lsi_src_id_write(phb, val);
}
break;
/* IODA table accesses */
case PHB_IODA_DATA0:
pnv_phb3_ioda_write(phb, val);
break;
/* RTC invalidation */
case PHB_RTC_INVALIDATE:
pnv_phb3_rtc_invalidate(phb, val);
break;
/* FFI request */
case PHB_FFI_REQUEST:
pnv_phb3_msi_ffi(&phb->msis, val);
break;
/* Silent simple writes */
case PHB_CONFIG_ADDRESS:
case PHB_IODA_ADDR:
case PHB_TCE_KILL:
case PHB_TCE_SPEC_CTL:
case PHB_PEST_BAR:
case PHB_PELTV_BAR:
case PHB_RTT_BAR:
case PHB_RBA_BAR:
case PHB_IVT_BAR:
case PHB_FFI_LOCK:
case PHB_LEM_FIR_ACCUM:
case PHB_LEM_ERROR_MASK:
case PHB_LEM_ACTION0:
case PHB_LEM_ACTION1:
break;
/* Noise on anything else */
default:
qemu_log_mask(LOG_UNIMP, "phb3: reg_write 0x%"PRIx64"=%"PRIx64"\n",
off, val);
}
}
uint64_t pnv_phb3_reg_read(void *opaque, hwaddr off, unsigned size)
{
PnvPHB3 *phb = opaque;
PCIHostState *pci = PCI_HOST_BRIDGE(phb);
uint64_t val;
if ((off & 0xfffc) == PHB_CONFIG_DATA) {
return pnv_phb3_config_read(phb, off & 0x3, size);
}
/* Other registers are 64-bit only */
if (size != 8 || off & 0x7) {
phb3_error(phb, "Invalid register access, offset: 0x%"PRIx64" size: %d",
off, size);
return ~0ull;
}
/* Default read from cache */
val = phb->regs[off >> 3];
switch (off) {
/* Simulate venice DD2.0 */
case PHB_VERSION:
return 0x000000a300000005ull;
case PHB_PCIE_SYSTEM_CONFIG:
return 0x441100fc30000000;
/* IODA table accesses */
case PHB_IODA_DATA0:
return pnv_phb3_ioda_read(phb);
/* Link training always appears trained */
case PHB_PCIE_DLP_TRAIN_CTL:
if (!pci_find_device(pci->bus, 1, 0)) {
return 0;
}
return PHB_PCIE_DLP_INBAND_PRESENCE | PHB_PCIE_DLP_TC_DL_LINKACT;
/* FFI Lock */
case PHB_FFI_LOCK:
/* Set lock and return previous value */
phb->regs[off >> 3] |= PHB_FFI_LOCK_STATE;
return val;
/* DMA read sync: make it look like it's complete */
case PHB_DMARD_SYNC:
return PHB_DMARD_SYNC_COMPLETE;
/* Silent simple reads */
case PHB_PHB3_CONFIG:
case PHB_M32_BASE_ADDR:
case PHB_M32_BASE_MASK:
case PHB_M32_START_ADDR:
case PHB_CONFIG_ADDRESS:
case PHB_IODA_ADDR:
case PHB_RTC_INVALIDATE:
case PHB_TCE_KILL:
case PHB_TCE_SPEC_CTL:
case PHB_PEST_BAR:
case PHB_PELTV_BAR:
case PHB_RTT_BAR:
case PHB_RBA_BAR:
case PHB_IVT_BAR:
case PHB_M64_UPPER_BITS:
case PHB_LEM_FIR_ACCUM:
case PHB_LEM_ERROR_MASK:
case PHB_LEM_ACTION0:
case PHB_LEM_ACTION1:
break;
/* Noise on anything else */
default:
qemu_log_mask(LOG_UNIMP, "phb3: reg_read 0x%"PRIx64"=%"PRIx64"\n",
off, val);
}
return val;
}
static const MemoryRegionOps pnv_phb3_reg_ops = {
.read = pnv_phb3_reg_read,
.write = pnv_phb3_reg_write,
.valid.min_access_size = 1,
.valid.max_access_size = 8,
.impl.min_access_size = 1,
.impl.max_access_size = 8,
.endianness = DEVICE_BIG_ENDIAN,
};
static int pnv_phb3_map_irq(PCIDevice *pci_dev, int irq_num)
{
/* Check that out properly ... */
return irq_num & 3;
}
static void pnv_phb3_set_irq(void *opaque, int irq_num, int level)
{
PnvPHB3 *phb = opaque;
/* LSI only ... */
if (irq_num > 3) {
phb3_error(phb, "Unknown IRQ to set %d", irq_num);
}
qemu_set_irq(phb->qirqs[irq_num], level);
}
static bool pnv_phb3_resolve_pe(PnvPhb3DMASpace *ds)
{
uint64_t rtt, addr;
uint16_t rte;
int bus_num;
/* Already resolved ? */
if (ds->pe_num != PHB_INVALID_PE) {
return true;
}
/* We need to lookup the RTT */
rtt = ds->phb->regs[PHB_RTT_BAR >> 3];
if (!(rtt & PHB_RTT_BAR_ENABLE)) {
phb3_error(ds->phb, "DMA with RTT BAR disabled !");
/* Set error bits ? fence ? ... */
return false;
}
/* Read RTE */
bus_num = pci_bus_num(ds->bus);
addr = rtt & PHB_RTT_BASE_ADDRESS_MASK;
addr += 2 * ((bus_num << 8) | ds->devfn);
if (dma_memory_read(&address_space_memory, addr, &rte,
sizeof(rte), MEMTXATTRS_UNSPECIFIED)) {
phb3_error(ds->phb, "Failed to read RTT entry at 0x%"PRIx64, addr);
/* Set error bits ? fence ? ... */
return false;
}
rte = be16_to_cpu(rte);
/* Fail upon reading of invalid PE# */
if (rte >= PNV_PHB3_NUM_PE) {
phb3_error(ds->phb, "RTE for RID 0x%x invalid (%04x", ds->devfn, rte);
/* Set error bits ? fence ? ... */
return false;
}
ds->pe_num = rte;
return true;
}
static void pnv_phb3_translate_tve(PnvPhb3DMASpace *ds, hwaddr addr,
bool is_write, uint64_t tve,
IOMMUTLBEntry *tlb)
{
uint64_t tta = GETFIELD(IODA2_TVT_TABLE_ADDR, tve);
int32_t lev = GETFIELD(IODA2_TVT_NUM_LEVELS, tve);
uint32_t tts = GETFIELD(IODA2_TVT_TCE_TABLE_SIZE, tve);
uint32_t tps = GETFIELD(IODA2_TVT_IO_PSIZE, tve);
PnvPHB3 *phb = ds->phb;
/* Invalid levels */
if (lev > 4) {
phb3_error(phb, "Invalid #levels in TVE %d", lev);
return;
}
/* IO Page Size of 0 means untranslated, else use TCEs */
if (tps == 0) {
/*
* We only support non-translate in top window.
*
* TODO: Venice/Murano support it on bottom window above 4G and
* Naples suports it on everything
*/
if (!(tve & PPC_BIT(51))) {
phb3_error(phb, "xlate for invalid non-translate TVE");
return;
}
/* TODO: Handle boundaries */
/* Use 4k pages like q35 ... for now */
tlb->iova = addr & 0xfffffffffffff000ull;
tlb->translated_addr = addr & 0x0003fffffffff000ull;
tlb->addr_mask = 0xfffull;
tlb->perm = IOMMU_RW;
} else {
uint32_t tce_shift, tbl_shift, sh;
uint64_t base, taddr, tce, tce_mask;
/* TVE disabled ? */
if (tts == 0) {
phb3_error(phb, "xlate for invalid translated TVE");
return;
}
/* Address bits per bottom level TCE entry */
tce_shift = tps + 11;
/* Address bits per table level */
tbl_shift = tts + 8;
/* Top level table base address */
base = tta << 12;
/* Total shift to first level */
sh = tbl_shift * lev + tce_shift;
/* TODO: Multi-level untested */
do {
lev--;
/* Grab the TCE address */
taddr = base | (((addr >> sh) & ((1ul << tbl_shift) - 1)) << 3);
if (dma_memory_read(&address_space_memory, taddr, &tce,
sizeof(tce), MEMTXATTRS_UNSPECIFIED)) {
phb3_error(phb, "Failed to read TCE at 0x%"PRIx64, taddr);
return;
}
tce = be64_to_cpu(tce);
/* Check permission for indirect TCE */
if ((lev >= 0) && !(tce & 3)) {
phb3_error(phb, "Invalid indirect TCE at 0x%"PRIx64, taddr);
phb3_error(phb, " xlate %"PRIx64":%c TVE=%"PRIx64, addr,
is_write ? 'W' : 'R', tve);
phb3_error(phb, " tta=%"PRIx64" lev=%d tts=%d tps=%d",
tta, lev, tts, tps);
return;
}
sh -= tbl_shift;
base = tce & ~0xfffull;
} while (lev >= 0);
/* We exit the loop with TCE being the final TCE */
if ((is_write & !(tce & 2)) || ((!is_write) && !(tce & 1))) {
phb3_error(phb, "TCE access fault at 0x%"PRIx64, taddr);
phb3_error(phb, " xlate %"PRIx64":%c TVE=%"PRIx64, addr,
is_write ? 'W' : 'R', tve);
phb3_error(phb, " tta=%"PRIx64" lev=%d tts=%d tps=%d",
tta, lev, tts, tps);
return;
}
tce_mask = ~((1ull << tce_shift) - 1);
tlb->iova = addr & tce_mask;
tlb->translated_addr = tce & tce_mask;
tlb->addr_mask = ~tce_mask;
tlb->perm = tce & 3;
}
}
static IOMMUTLBEntry pnv_phb3_translate_iommu(IOMMUMemoryRegion *iommu,
hwaddr addr,
IOMMUAccessFlags flag,
int iommu_idx)
{
PnvPhb3DMASpace *ds = container_of(iommu, PnvPhb3DMASpace, dma_mr);
int tve_sel;
uint64_t tve, cfg;
IOMMUTLBEntry ret = {
.target_as = &address_space_memory,
.iova = addr,
.translated_addr = 0,
.addr_mask = ~(hwaddr)0,
.perm = IOMMU_NONE,
};
PnvPHB3 *phb = ds->phb;
/* Resolve PE# */
if (!pnv_phb3_resolve_pe(ds)) {
phb3_error(phb, "Failed to resolve PE# for bus @%p (%d) devfn 0x%x",
ds->bus, pci_bus_num(ds->bus), ds->devfn);
return ret;
}
/* Check top bits */
switch (addr >> 60) {
case 00:
/* DMA or 32-bit MSI ? */
cfg = ds->phb->regs[PHB_PHB3_CONFIG >> 3];
if ((cfg & PHB_PHB3C_32BIT_MSI_EN) &&
((addr & 0xffffffffffff0000ull) == 0xffff0000ull)) {
phb3_error(phb, "xlate on 32-bit MSI region");
return ret;
}
/* Choose TVE XXX Use PHB3 Control Register */
tve_sel = (addr >> 59) & 1;
tve = ds->phb->ioda_TVT[ds->pe_num * 2 + tve_sel];
pnv_phb3_translate_tve(ds, addr, flag & IOMMU_WO, tve, &ret);
break;
case 01:
phb3_error(phb, "xlate on 64-bit MSI region");
break;
default:
phb3_error(phb, "xlate on unsupported address 0x%"PRIx64, addr);
}
return ret;
}
#define TYPE_PNV_PHB3_IOMMU_MEMORY_REGION "pnv-phb3-iommu-memory-region"
DECLARE_INSTANCE_CHECKER(IOMMUMemoryRegion, PNV_PHB3_IOMMU_MEMORY_REGION,
TYPE_PNV_PHB3_IOMMU_MEMORY_REGION)
static void pnv_phb3_iommu_memory_region_class_init(ObjectClass *klass,
void *data)
{
IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
imrc->translate = pnv_phb3_translate_iommu;
}
static const TypeInfo pnv_phb3_iommu_memory_region_info = {
.parent = TYPE_IOMMU_MEMORY_REGION,
.name = TYPE_PNV_PHB3_IOMMU_MEMORY_REGION,
.class_init = pnv_phb3_iommu_memory_region_class_init,
};
/*
* MSI/MSIX memory region implementation.
* The handler handles both MSI and MSIX.
*/
static void pnv_phb3_msi_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
PnvPhb3DMASpace *ds = opaque;
/* Resolve PE# */
if (!pnv_phb3_resolve_pe(ds)) {
phb3_error(ds->phb, "Failed to resolve PE# for bus @%p (%d) devfn 0x%x",
ds->bus, pci_bus_num(ds->bus), ds->devfn);
return;
}
pnv_phb3_msi_send(&ds->phb->msis, addr, data, ds->pe_num);
}
/* There is no .read as the read result is undefined by PCI spec */
static uint64_t pnv_phb3_msi_read(void *opaque, hwaddr addr, unsigned size)
{
PnvPhb3DMASpace *ds = opaque;
phb3_error(ds->phb, "invalid read @ 0x%" HWADDR_PRIx, addr);
return -1;
}
static const MemoryRegionOps pnv_phb3_msi_ops = {
.read = pnv_phb3_msi_read,
.write = pnv_phb3_msi_write,
.endianness = DEVICE_LITTLE_ENDIAN
};
static AddressSpace *pnv_phb3_dma_iommu(PCIBus *bus, void *opaque, int devfn)
{
PnvPHB3 *phb = opaque;
PnvPhb3DMASpace *ds;
QLIST_FOREACH(ds, &phb->dma_spaces, list) {
if (ds->bus == bus && ds->devfn == devfn) {
break;
}
}
if (ds == NULL) {
ds = g_new0(PnvPhb3DMASpace, 1);
ds->bus = bus;
ds->devfn = devfn;
ds->pe_num = PHB_INVALID_PE;
ds->phb = phb;
memory_region_init_iommu(&ds->dma_mr, sizeof(ds->dma_mr),
TYPE_PNV_PHB3_IOMMU_MEMORY_REGION,
OBJECT(phb), "phb3_iommu", UINT64_MAX);
address_space_init(&ds->dma_as, MEMORY_REGION(&ds->dma_mr),
"phb3_iommu");
memory_region_init_io(&ds->msi32_mr, OBJECT(phb), &pnv_phb3_msi_ops,
ds, "msi32", 0x10000);
memory_region_init_io(&ds->msi64_mr, OBJECT(phb), &pnv_phb3_msi_ops,
ds, "msi64", 0x100000);
pnv_phb3_update_msi_regions(ds);
QLIST_INSERT_HEAD(&phb->dma_spaces, ds, list);
}
return &ds->dma_as;
}
static void pnv_phb3_instance_init(Object *obj)
{
PnvPHB3 *phb = PNV_PHB3(obj);
QLIST_INIT(&phb->dma_spaces);
/* LSI sources */
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 07:32:25 +02:00
object_initialize_child(obj, "lsi", &phb->lsis, TYPE_ICS);
/* Default init ... will be fixed by HW inits */
phb->lsis.offset = 0;
/* MSI sources */
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 07:32:25 +02:00
object_initialize_child(obj, "msi", &phb->msis, TYPE_PHB3_MSI);
/* Power Bus Common Queue */
qom: Less verbose object_initialize_child() All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-10 07:32:25 +02:00
object_initialize_child(obj, "pbcq", &phb->pbcq, TYPE_PNV_PBCQ);
}
static void pnv_phb3_realize(DeviceState *dev, Error **errp)
{
PnvPHB3 *phb = PNV_PHB3(dev);
PCIHostState *pci = PCI_HOST_BRIDGE(dev);
PnvMachineState *pnv = PNV_MACHINE(qdev_get_machine());
int i;
if (phb->phb_id >= PNV_CHIP_GET_CLASS(phb->chip)->num_phbs) {
error_setg(errp, "invalid PHB index: %d", phb->phb_id);
return;
}
/* LSI sources */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_link(OBJECT(&phb->lsis), "xics", OBJECT(pnv),
&error_abort);
object_property_set_int(OBJECT(&phb->lsis), "nr-irqs", PNV_PHB3_NUM_LSI,
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!qdev_realize(DEVICE(&phb->lsis), NULL, errp)) {
return;
}
for (i = 0; i < phb->lsis.nr_irqs; i++) {
ics_set_irq_type(&phb->lsis, i, true);
}
phb->qirqs = qemu_allocate_irqs(ics_set_irq, &phb->lsis, phb->lsis.nr_irqs);
/* MSI sources */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_link(OBJECT(&phb->msis), "phb", OBJECT(phb),
&error_abort);
object_property_set_link(OBJECT(&phb->msis), "xics", OBJECT(pnv),
&error_abort);
object_property_set_int(OBJECT(&phb->msis), "nr-irqs", PHB3_MAX_MSI,
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!qdev_realize(DEVICE(&phb->msis), NULL, errp)) {
return;
}
/* Power Bus Common Queue */
qom: Put name parameter before value / visitor parameter The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-07 18:05:54 +02:00
object_property_set_link(OBJECT(&phb->pbcq), "phb", OBJECT(phb),
&error_abort);
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
if (!qdev_realize(DEVICE(&phb->pbcq), NULL, errp)) {
return;
}
/* Controller Registers */
memory_region_init_io(&phb->mr_regs, OBJECT(phb), &pnv_phb3_reg_ops, phb,
"phb3-regs", 0x1000);
/*
* PHB3 doesn't support IO space. However, qemu gets very upset if
* we don't have an IO region to anchor IO BARs onto so we just
* initialize one which we never hook up to anything
*/
memory_region_init(&phb->pci_io, OBJECT(phb), "pci-io", 0x10000);
memory_region_init(&phb->pci_mmio, OBJECT(phb), "pci-mmio",
PCI_MMIO_TOTAL_SIZE);
pnv_phb3.c: do not set 'root-bus' as bus name All pnv-phb3-root-bus buses are being created as 'root-bus'. This makes it impossible to, for example, add a pnv-phb3-root-port in a specific root bus, since they all have the same name. By default the device will be parented by the pnv-phb3 device that precedeced it in the QEMU command line. Moreover, this doesn't all for custom bus naming. Libvirt, for instance, likes to name these buses as 'pcie.N', where 'N' is the index value of the controller in the domain XML, by using the 'id' command line attribute. At this moment this is also being ignored - the created root bus will always be named 'root-bus'. This patch fixes both scenarios by removing the 'root-bus' name from the pci_register_root_bus() call. If an "id" is provided, use that. Otherwise use 'NULL' as bus name. The 'NULL' value will be handled in qbus_init_internal() and it will defaulted as lowercase bus type + the global bus_id value. After this path we can define the bus name by using the 'id' attribute: qemu-system-ppc64 -m 4G -machine powernv8,accel=tcg \ -device pnv-phb3,chip-id=0,index=1,id=pcie.0 dev: pnv-phb3, id "pcie.0" index = 1 (0x1) chip-id = 0 (0x0) x-config-reg-migration-enabled = true bypass-iommu = false bus: pcie.0 type pnv-phb3-root-bus And without an 'id' we will have the following default: qemu-system-ppc64 -m 4G -machine powernv8,accel=tcg \ -device pnv-phb3,chip-id=0,index=1 dev: pnv-phb3, id "" index = 1 (0x1) chip-id = 0 (0x0) x-config-reg-migration-enabled = true bypass-iommu = false bus: pnv-phb3-root-bus.0 type pnv-phb3-root-bus Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211228193806.1198496-3-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-04 07:55:34 +01:00
pci->bus = pci_register_root_bus(dev,
dev->id ? dev->id : NULL,
pnv_phb3_set_irq, pnv_phb3_map_irq, phb,
&phb->pci_mmio, &phb->pci_io,
0, 4, TYPE_PNV_PHB3_ROOT_BUS);
pci_setup_iommu(pci->bus, pnv_phb3_dma_iommu, phb);
ppc/pnv: Remove user-created PHB{3,4,5} devices On a real system with POWER{8,9,10} processors, PHBs are sub-units of the processor, they can be deactivated by firmware but not plugged in or out like a PCI adapter on a slot. Nevertheless, having user-created PHBs in QEMU seemed to be a good idea for testing purposes : 1. having a limited set of PHBs speedups boot time. 2. it is useful to be able to mimic a partially broken topology you some time have to deal with during bring-up. PowerNV is also used for distro install tests and having libvirt support eases these tasks. libvirt prefers to run the machine with -nodefaults to be sure not to drag unexpected devices which would need to be defined in the domain file without being specified on the QEMU command line. For this reason : 3. -nodefaults should not include default PHBs User-created PHB{3,4,5} devices satisfied all these needs but reality proves to be a bit more complex, internally when modeling such devices, and externally when dealing with the user interface. Req 1. and 2. can be simply addressed differently with a machine option: "phb-mask=<uint>", which QEMU would use to enable/disable PHB device nodes when creating the device tree. For Req 3., we need to make sure we are taking the right approach. It seems that we should expose a new type of user-created PHB device, a generic virtualized one, that libvirt would use and not one depending on the processor revision. This needs more thinking. For now, remove user-created PHB{3,4,5} devices. All the cleanups we did are not lost and they will be useful for the next steps. Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices") Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices") Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220314130514.529931-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
pnv_phb_attach_root_port(PCI_HOST_BRIDGE(phb), TYPE_PNV_PHB3_ROOT_PORT);
}
void pnv_phb3_update_regions(PnvPHB3 *phb)
{
PnvPBCQState *pbcq = &phb->pbcq;
/* Unmap first always */
if (memory_region_is_mapped(&phb->mr_regs)) {
memory_region_del_subregion(&pbcq->phbbar, &phb->mr_regs);
}
/* Map registers if enabled */
if (memory_region_is_mapped(&pbcq->phbbar)) {
/* TODO: We should use the PHB BAR 2 register but we don't ... */
memory_region_add_subregion(&pbcq->phbbar, 0, &phb->mr_regs);
}
/* Check/update m32 */
if (memory_region_is_mapped(&phb->mr_m32)) {
pnv_phb3_check_m32(phb);
}
pnv_phb3_check_all_m64s(phb);
}
static const char *pnv_phb3_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
PnvPHB3 *phb = PNV_PHB3(host_bridge);
snprintf(phb->bus_path, sizeof(phb->bus_path), "00%02x:%02x",
phb->chip_id, phb->phb_id);
return phb->bus_path;
}
static Property pnv_phb3_properties[] = {
DEFINE_PROP_UINT32("index", PnvPHB3, phb_id, 0),
DEFINE_PROP_UINT32("chip-id", PnvPHB3, chip_id, 0),
DEFINE_PROP_LINK("chip", PnvPHB3, chip, TYPE_PNV_CHIP, PnvChip *),
DEFINE_PROP_END_OF_LIST(),
};
static void pnv_phb3_class_init(ObjectClass *klass, void *data)
{
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
hc->root_bus_path = pnv_phb3_root_bus_path;
dc->realize = pnv_phb3_realize;
device_class_set_props(dc, pnv_phb3_properties);
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
ppc/pnv: Remove user-created PHB{3,4,5} devices On a real system with POWER{8,9,10} processors, PHBs are sub-units of the processor, they can be deactivated by firmware but not plugged in or out like a PCI adapter on a slot. Nevertheless, having user-created PHBs in QEMU seemed to be a good idea for testing purposes : 1. having a limited set of PHBs speedups boot time. 2. it is useful to be able to mimic a partially broken topology you some time have to deal with during bring-up. PowerNV is also used for distro install tests and having libvirt support eases these tasks. libvirt prefers to run the machine with -nodefaults to be sure not to drag unexpected devices which would need to be defined in the domain file without being specified on the QEMU command line. For this reason : 3. -nodefaults should not include default PHBs User-created PHB{3,4,5} devices satisfied all these needs but reality proves to be a bit more complex, internally when modeling such devices, and externally when dealing with the user interface. Req 1. and 2. can be simply addressed differently with a machine option: "phb-mask=<uint>", which QEMU would use to enable/disable PHB device nodes when creating the device tree. For Req 3., we need to make sure we are taking the right approach. It seems that we should expose a new type of user-created PHB device, a generic virtualized one, that libvirt would use and not one depending on the processor revision. This needs more thinking. For now, remove user-created PHB{3,4,5} devices. All the cleanups we did are not lost and they will be useful for the next steps. Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices") Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices") Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220314130514.529931-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
dc->user_creatable = false;
}
static const TypeInfo pnv_phb3_type_info = {
.name = TYPE_PNV_PHB3,
.parent = TYPE_PCIE_HOST_BRIDGE,
.instance_size = sizeof(PnvPHB3),
.class_init = pnv_phb3_class_init,
.instance_init = pnv_phb3_instance_init,
};
static void pnv_phb3_root_bus_class_init(ObjectClass *klass, void *data)
{
BusClass *k = BUS_CLASS(klass);
/*
* PHB3 has only a single root complex. Enforce the limit on the
* parent bus
*/
k->max_dev = 1;
}
static const TypeInfo pnv_phb3_root_bus_info = {
.name = TYPE_PNV_PHB3_ROOT_BUS,
.parent = TYPE_PCIE_BUS,
.class_init = pnv_phb3_root_bus_class_init,
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_PCIE_DEVICE },
{ }
},
};
static void pnv_phb3_root_port_realize(DeviceState *dev, Error **errp)
{
PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
PCIDevice *pci = PCI_DEVICE(dev);
PCIBus *bus = pci_get_bus(pci);
PnvPHB3 *phb = NULL;
Error *local_err = NULL;
phb = (PnvPHB3 *) object_dynamic_cast(OBJECT(bus->qbus.parent),
TYPE_PNV_PHB3);
if (!phb) {
error_setg(errp,
"pnv_phb3_root_port devices must be connected to pnv-phb3 buses");
return;
}
/* Set unique chassis/slot values for the root port */
qdev_prop_set_uint8(&pci->qdev, "chassis", phb->chip_id);
qdev_prop_set_uint16(&pci->qdev, "slot", phb->phb_id);
rpc->parent_realize(dev, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
pci_config_set_interrupt_pin(pci->config, 0);
}
static void pnv_phb3_root_port_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
PCIERootPortClass *rpc = PCIE_ROOT_PORT_CLASS(klass);
dc->desc = "IBM PHB3 PCIE Root Port";
device_class_set_parent_realize(dc, pnv_phb3_root_port_realize,
&rpc->parent_realize);
ppc/pnv: Remove user-created PHB{3,4,5} devices On a real system with POWER{8,9,10} processors, PHBs are sub-units of the processor, they can be deactivated by firmware but not plugged in or out like a PCI adapter on a slot. Nevertheless, having user-created PHBs in QEMU seemed to be a good idea for testing purposes : 1. having a limited set of PHBs speedups boot time. 2. it is useful to be able to mimic a partially broken topology you some time have to deal with during bring-up. PowerNV is also used for distro install tests and having libvirt support eases these tasks. libvirt prefers to run the machine with -nodefaults to be sure not to drag unexpected devices which would need to be defined in the domain file without being specified on the QEMU command line. For this reason : 3. -nodefaults should not include default PHBs User-created PHB{3,4,5} devices satisfied all these needs but reality proves to be a bit more complex, internally when modeling such devices, and externally when dealing with the user interface. Req 1. and 2. can be simply addressed differently with a machine option: "phb-mask=<uint>", which QEMU would use to enable/disable PHB device nodes when creating the device tree. For Req 3., we need to make sure we are taking the right approach. It seems that we should expose a new type of user-created PHB device, a generic virtualized one, that libvirt would use and not one depending on the processor revision. This needs more thinking. For now, remove user-created PHB{3,4,5} devices. All the cleanups we did are not lost and they will be useful for the next steps. Fixes: 5bc67b052b51 ("ppc/pnv: Introduce user creatable pnv-phb4 devices") Fixes: 1f6a88fffc75 ("ppc/pnv: Introduce support for user created PHB3 devices") Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220314130514.529931-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-14 15:57:17 +01:00
dc->user_creatable = false;
k->vendor_id = PCI_VENDOR_ID_IBM;
k->device_id = 0x03dc;
k->revision = 0;
rpc->exp_offset = 0x48;
rpc->aer_offset = 0x100;
}
static const TypeInfo pnv_phb3_root_port_info = {
.name = TYPE_PNV_PHB3_ROOT_PORT,
.parent = TYPE_PCIE_ROOT_PORT,
.instance_size = sizeof(PnvPHB3RootPort),
.class_init = pnv_phb3_root_port_class_init,
};
static void pnv_phb3_register_types(void)
{
type_register_static(&pnv_phb3_root_bus_info);
type_register_static(&pnv_phb3_root_port_info);
type_register_static(&pnv_phb3_type_info);
type_register_static(&pnv_phb3_iommu_memory_region_info);
}
type_init(pnv_phb3_register_types)