qemu-e2k/Makefile.target

243 lines
7.1 KiB
Makefile
Raw Normal View History

# -*- Mode: makefile -*-
BUILD_DIR?=$(CURDIR)/..
include ../config-host.mak
include config-target.mak
include config-devices.mak
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_NAME)
QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
$(QEMU_PROG): $(QEMU_PROGW)
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG),"GEN","$(TARGET_DIR)$(QEMU_PROG)")
QEMU_PROG_BUILD = $(QEMU_PROGW)
else
QEMU_PROG_BUILD = $(QEMU_PROG)
endif
endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(bindir)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp-installed")
$(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(realpath .)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp")
$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--group=all \
--format=simpletrace-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
$< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
else
stap:
endif
.PHONY: stap
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
#########################################################
# cpu emulator library
obj-y = exec.o translate-all.o cpu-exec.o
obj-y += translate-common.o
obj-y += cpu-exec-common.o
obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-y += tcg/tcg-common.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-y += fpu/softfloat.o
obj-y += target/$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-y += tcg-runtime.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
obj-$(call lnot,$(CONFIG_HAX)) += hax-stub.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
linux-user: Provide safe_syscall for fixing races between signals and syscalls If a signal is delivered immediately before a blocking system call the handler will only be called after the system call returns, which may be a long time later or never. This is fixed by using a function (safe_syscall) that checks if a guest signal is pending prior to making a system call, and if so does not call the system call and returns -TARGET_ERESTARTSYS. If a signal is received between the check and the system call host_signal_handler() rewinds execution to before the check. This rewinding has the effect of closing the race window so that safe_syscall will reliably either (a) go into the host syscall with no unprocessed guest signals pending or or (b) return -TARGET_ERESTARTSYS so that the caller can deal with the signals. Implementing this requires a per-host-architecture assembly language fragment. This will also resolve the mishandling of the SA_RESTART flag where we would restart a host system call and not call the guest signal handler until the syscall finally completed -- syscall restarting now always happens at the guest syscall level so the guest signal handler will run. (The host syscall will never be restarted because if the host kernel rewinds the PC to point at the syscall insn for a restart then our host_signal_handler() will see this and arrange the guest PC rewind.) This commit contains the infrastructure for implementing safe_syscall and the assembly language fragment for x86-64, but does not change any syscalls to use it. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: * Avoid having an architecture if-ladder in configure by putting linux-user/host/$(ARCH) on the include path and including safe-syscall.inc.S from it * Avoid ifdef ladder in signal.c by creating new hostdep.h to hold host-architecture-specific things * Added copyright/license header to safe-syscall.inc.S * Rewrote commit message * Added comments to safe-syscall.inc.S * Changed calling convention of safe_syscall() to match syscall() (returns -1 and host error in errno on failure) * Added a long comment in qemu.h about how to use safe_syscall() to implement guest syscalls. ] RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts" patch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 19:47:46 +02:00
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/linux-user/host/$(ARCH) \
linux-user: Provide safe_syscall for fixing races between signals and syscalls If a signal is delivered immediately before a blocking system call the handler will only be called after the system call returns, which may be a long time later or never. This is fixed by using a function (safe_syscall) that checks if a guest signal is pending prior to making a system call, and if so does not call the system call and returns -TARGET_ERESTARTSYS. If a signal is received between the check and the system call host_signal_handler() rewinds execution to before the check. This rewinding has the effect of closing the race window so that safe_syscall will reliably either (a) go into the host syscall with no unprocessed guest signals pending or or (b) return -TARGET_ERESTARTSYS so that the caller can deal with the signals. Implementing this requires a per-host-architecture assembly language fragment. This will also resolve the mishandling of the SA_RESTART flag where we would restart a host system call and not call the guest signal handler until the syscall finally completed -- syscall restarting now always happens at the guest syscall level so the guest signal handler will run. (The host syscall will never be restarted because if the host kernel rewinds the PC to point at the syscall insn for a restart then our host_signal_handler() will see this and arrange the guest PC rewind.) This commit contains the infrastructure for implementing safe_syscall and the assembly language fragment for x86-64, but does not change any syscalls to use it. Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-14-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: * Avoid having an architecture if-ladder in configure by putting linux-user/host/$(ARCH) on the include path and including safe-syscall.inc.S from it * Avoid ifdef ladder in signal.c by creating new hostdep.h to hold host-architecture-specific things * Added copyright/license header to safe-syscall.inc.S * Rewrote commit message * Added comments to safe-syscall.inc.S * Changed calling convention of safe_syscall() to match syscall() (returns -1 and host error in errno on failure) * Added a long comment in qemu.h about how to use safe_syscall() to implement guest syscalls. ] RV: squashed Peters "fixup! linux-user: compile on non-x86-64 hosts" patch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 19:47:46 +02:00
-I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o user-exec.o user-exec-stub.o
endif #CONFIG_LINUX_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
obj-y += bsd-user/
obj-y += gdbstub.o user-exec.o user-exec-stub.o
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o bootdevice.o
obj-y += hw/
obj-$(CONFIG_KVM) += kvm-all.o
obj-y += memory.o cputlb.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-y += migration/ram.o migration/savevm.o
LIBS := $(libs_softmmu) $(LIBS)
# xen support
obj-$(CONFIG_XEN) += xen-common.o
obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
obj-$(call lnot,$(CONFIG_XEN)) += xen-common-stub.o
obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
# Hardware support
ifeq ($(TARGET_NAME), sparc64)
obj-y += hw/sparc64/
else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
GENERATED_FILES += hmp-commands.h hmp-commands-info.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
chardev-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
block-obj-y \
block-obj-m \
chardev-obj-y \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m \
trace-obj-y)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
$(QEMU_PROG_BUILD): config-devices.mak
COMMON_LDADDS = $(trace-obj-y) ../libqemuutil.a ../libqemustub.a
# build either PROG or PROGW
$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS)
$(call LINK, $(filter-out %.mak, $^))
ifdef CONFIG_DARWIN
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"GEN","$(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
rules.mak: quiet-command: Split command name and args to print The quiet-command make rule currently takes two arguments: the command and arguments to run, and a string to print if the V flag is not set (ie we are not being verbose). By convention, the string printed is of the form " NAME some args". Unfortunately to get nicely lined up output all the strings have to agree about what column the arguments should start in, which means that if we add a new quiet-command usage which wants a slightly longer CMD name then we either put up with misalignment or change every quiet-command string. Split the quiet-mode string into two, the "NAME" and the "same args" part, and use printf(1) to format the string automatically. This means we only need to change one place if we want to support a longer maximum name. In particular, we can now print 7-character names lined up properly (they are needed for the OSX "SETTOOL" invocation). Change all the uses of quiet-command to the new syntax. (Any which are missed or inadvertently reintroduced via later merges will result in slightly misformatted quiet output rather than disaster.) A few places in the pc-bios/ makefiles are updated to use "BUILD", "SIGN" and "STRIP" rather than "Building", "Signing" and "Stripping" for consistency and to keep them below 7 characters. Module .mo links now print "LD" rather than the nonstandard "LD -r". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-04 18:27:21 +02:00
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
clean: clean-target
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
install: all
ifneq ($(PROGS),)
$(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
endif
GENERATED_FILES += config-target.h
Makefile: $(GENERATED_FILES)