qemu-e2k/Makefile.objs

#######################################################################
# QObject
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
qobject-obj-y += qerror.o

#######################################################################
# oslib-obj-y is code depending on the OS (win32 vs posix)
oslib-obj-y = osdep.o
oslib-obj-$(CONFIG_WIN32) += oslib-win32.o
oslib-obj-$(CONFIG_POSIX) += oslib-posix.o

#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img

block-obj-y = cutils.o cache-utils.o qemu-malloc.o qemu-option.o module.o
block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o

block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
block-nested-y += qed-check.o
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
block-nested-$(CONFIG_WIN32) += raw-win32.o
block-nested-$(CONFIG_POSIX) += raw-posix.o
block-nested-$(CONFIG_CURL) += curl.o
block-nested-$(CONFIG_RBD) += rbd.o

block-obj-y +=  $(addprefix block/, $(block-nested-y))

net-obj-y = net.o
net-nested-y = queue.o checksum.o util.o
net-nested-y += socket.o
net-nested-y += dump.o
net-nested-$(CONFIG_POSIX) += tap.o
net-nested-$(CONFIG_LINUX) += tap-linux.o
net-nested-$(CONFIG_WIN32) += tap-win32.o
net-nested-$(CONFIG_BSD) += tap-bsd.o
net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
net-nested-$(CONFIG_AIX) += tap-aix.o
net-nested-$(CONFIG_HAIKU) += tap-haiku.o
net-nested-$(CONFIG_SLIRP) += slirp.o
net-nested-$(CONFIG_VDE) += vde.o
net-obj-y += $(addprefix net/, $(net-nested-y))

ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS),yy)
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
# only pull in the actual virtio-9p device if we also enabled virtio.
CONFIG_REALLY_VIRTFS=y
endif
fsdev-nested-$(CONFIG_VIRTFS) = qemu-fsdev.o
fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))

######################################################################
# libqemu_common.a: Target independent part of system emulation. The
# long term path is to suppress *all* target specific code in case of
# system emulation, i.e. a single QEMU executable should support all
# CPUs and machines.

common-obj-y = $(block-obj-y) blockdev.o
common-obj-y += $(net-obj-y)
common-obj-y += $(qobject-obj-y)
common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
common-obj-y += readline.o console.o cursor.o async.o qemu-error.o
common-obj-y += $(oslib-obj-y)
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o

common-obj-y += tcg-runtime.o host-utils.o
common-obj-y += irq.o ioport.o input.o
common-obj-$(CONFIG_PTIMER) += ptimer.o
common-obj-$(CONFIG_MAX7310) += max7310.o
common-obj-$(CONFIG_WM8750) += wm8750.o
common-obj-$(CONFIG_TWL92230) += twl92230.o
common-obj-$(CONFIG_TSC2005) += tsc2005.o
common-obj-$(CONFIG_LM832X) += lm832x.o
common-obj-$(CONFIG_TMP105) += tmp105.o
common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
common-obj-$(CONFIG_SSD0303) += ssd0303.o
common-obj-$(CONFIG_SSD0323) += ssd0323.o
common-obj-$(CONFIG_ADS7846) += ads7846.o
common-obj-$(CONFIG_MAX111X) += max111x.o
common-obj-$(CONFIG_DS1338) += ds1338.o
common-obj-y += i2c.o smbus.o smbus_eeprom.o
common-obj-y += eeprom93xx.o
common-obj-y += scsi-disk.o cdrom.o
common-obj-y += scsi-generic.o scsi-bus.o
common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
common-obj-$(CONFIG_SSI) += ssi.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
common-obj-$(CONFIG_SD) += sd.o
common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
common-obj-y += bt-hci-csr.o
common-obj-y += buffered_file.o migration.o migration-tcp.o qemu-sockets.o
common-obj-y += qemu-char.o savevm.o #aio.o
common-obj-y += msmouse.o ps2.o
common-obj-y += qdev.o qdev-properties.o
common-obj-y += block-migration.o
common-obj-y += pflib.o
common-obj-y += bitmap.o bitops.o

common-obj-$(CONFIG_BRLAPI) += baum.o
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
common-obj-$(CONFIG_WIN32) += version.o

common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o

audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
audio-obj-$(CONFIG_SDL) += sdlaudio.o
audio-obj-$(CONFIG_OSS) += ossaudio.o
audio-obj-$(CONFIG_SPICE) += spiceaudio.o
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
audio-obj-$(CONFIG_ESD) += esdaudio.o
audio-obj-$(CONFIG_PA) += paaudio.o
audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
audio-obj-y += wavcapture.o
common-obj-y += $(addprefix audio/, $(audio-obj-y))

ui-obj-y += keymaps.o
ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
ui-obj-$(CONFIG_CURSES) += curses.o
ui-obj-y += vnc.o d3des.o
ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
ui-obj-y += vnc-enc-tight.o vnc-palette.o
ui-obj-y += vnc-enc-zrle.o
ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
ui-obj-$(CONFIG_COCOA) += cocoa.o
ifdef CONFIG_VNC_THREAD
ui-obj-y += vnc-jobs-async.o
else
ui-obj-y += vnc-jobs-sync.o
endif
common-obj-y += $(addprefix ui/, $(ui-obj-y))

common-obj-y += iov.o acl.o
common-obj-$(CONFIG_THREAD) += qemu-thread.o
common-obj-$(CONFIG_POSIX) += compatfd.o
common-obj-y += notify.o event_notifier.o
common-obj-y += qemu-timer.o qemu-timer-common.o

slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o
common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))

# xen backend driver support
common-obj-$(CONFIG_XEN) += xen_backend.o xen_devconfig.o
common-obj-$(CONFIG_XEN) += xen_console.o xenfb.o xen_disk.o xen_nic.o

######################################################################
# libuser

user-obj-y =
user-obj-y += envlist.o path.o
user-obj-y += tcg-runtime.o host-utils.o
user-obj-y += cutils.o cache-utils.o

######################################################################
# libhw

hw-obj-y =
hw-obj-y += vl.o loader.o
hw-obj-$(CONFIG_VIRTIO) += virtio.o virtio-console.o
hw-obj-y += fw_cfg.o
hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
hw-obj-$(CONFIG_PCI) += msix.o msi.o
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
hw-obj-y += watchdog.o
hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
hw-obj-$(CONFIG_ECC) += ecc.o
hw-obj-$(CONFIG_NAND) += nand.o
hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o

hw-obj-$(CONFIG_M48T59) += m48t59.o
hw-obj-$(CONFIG_ESCC) += escc.o
hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o

hw-obj-$(CONFIG_SERIAL) += serial.o
hw-obj-$(CONFIG_PARALLEL) += parallel.o
hw-obj-$(CONFIG_I8254) += i8254.o
hw-obj-$(CONFIG_PCSPK) += pcspk.o
hw-obj-$(CONFIG_PCKBD) += pckbd.o
hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
hw-obj-$(CONFIG_FDC) += fdc.o
hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
hw-obj-$(CONFIG_DMA) += dma.o
hw-obj-$(CONFIG_HPET) += hpet.o
hw-obj-$(CONFIG_APPLESMC) += applesmc.o

# PPC devices
hw-obj-$(CONFIG_OPENPIC) += openpic.o
hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
# Mac shared devices
hw-obj-$(CONFIG_MACIO) += macio.o
hw-obj-$(CONFIG_CUDA) += cuda.o
hw-obj-$(CONFIG_ADB) += adb.o
hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
# OldWorld PowerMac
hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
# NewWorld PowerMac
hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
# PowerPC E500 boards
hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o

# MIPS devices
hw-obj-$(CONFIG_PIIX4) += piix4.o

# PCI watchdog devices
hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o

hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o

# PCI network cards
hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
hw-obj-$(CONFIG_E1000_PCI) += e1000.o
hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o

hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
hw-obj-$(CONFIG_LAN9118) += lan9118.o
hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o

# IDE
hw-obj-$(CONFIG_IDE_CORE) += ide/core.o
hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
hw-obj-$(CONFIG_AHCI) += ide/ahci.o
hw-obj-$(CONFIG_AHCI) += ide/ich.o

# SCSI layer
hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
hw-obj-$(CONFIG_ESP) += esp.o

hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
hw-obj-y += qdev-addr.o

# VGA
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o

hw-obj-$(CONFIG_RC4030) += rc4030.o
hw-obj-$(CONFIG_DP8393X) += dp8393x.o
hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
hw-obj-$(CONFIG_MIPSNET) += mipsnet.o

# Sound
sound-obj-y =
sound-obj-$(CONFIG_SB16) += sb16.o
sound-obj-$(CONFIG_ES1370) += es1370.o
sound-obj-$(CONFIG_AC97) += ac97.o
sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
sound-obj-$(CONFIG_CS4231A) += cs4231a.o
sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o

adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)

hw-obj-$(CONFIG_REALLY_VIRTFS) += virtio-9p-debug.o
hw-obj-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
hw-obj-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o

######################################################################
# libdis
# NOTE: the disassembler code is only needed for debugging

libdis-y =
libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
libdis-$(CONFIG_ARM_DIS) += arm-dis.o
libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
libdis-$(CONFIG_I386_DIS) += i386-dis.o
libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
libdis-$(CONFIG_S390_DIS) += s390-dis.o
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o

######################################################################
# trace

ifeq ($(TRACE_BACKEND),dtrace)
trace-obj-y = trace-dtrace.o
else
trace-obj-y = trace.o
ifeq ($(TRACE_BACKEND),simple)
trace-obj-y += simpletrace.o
user-obj-y += qemu-timer-common.o
endif
endif

vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)

vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)