qemu-e2k/hw/ide/ahci.c

1493 lines
44 KiB
C
Raw Normal View History

/*
* QEMU AHCI Emulation
*
* Copyright (c) 2010 qiaochong@loongson.cn
* Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
* Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
* Copyright (c) 2010 Alexander Graf <agraf@suse.de>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*
*/
#include <hw/hw.h>
#include <hw/pci/msi.h>
#include <hw/i386/pc.h>
#include <hw/pci/pci.h>
#include <hw/sysbus.h>
#include "monitor/monitor.h"
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
#include "internal.h"
#include <hw/ide/pci.h>
#include <hw/ide/ahci.h>
#define DEBUG_AHCI 0
#define DPRINTF(port, fmt, ...) \
do { \
if (DEBUG_AHCI) { \
fprintf(stderr, "ahci: %s: [%d] ", __func__, port); \
fprintf(stderr, fmt, ## __VA_ARGS__); \
} \
} while (0)
static void check_cmd(AHCIState *s, int port);
static int handle_cmd(AHCIState *s,int port,int slot);
static void ahci_reset_port(AHCIState *s, int port);
static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis);
static void ahci_init_d2h(AHCIDevice *ad);
static int ahci_dma_prepare_buf(IDEDMA *dma, int is_write);
static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes);
static uint32_t ahci_port_read(AHCIState *s, int port, int offset)
{
uint32_t val;
AHCIPortRegs *pr;
pr = &s->dev[port].port_regs;
switch (offset) {
case PORT_LST_ADDR:
val = pr->lst_addr;
break;
case PORT_LST_ADDR_HI:
val = pr->lst_addr_hi;
break;
case PORT_FIS_ADDR:
val = pr->fis_addr;
break;
case PORT_FIS_ADDR_HI:
val = pr->fis_addr_hi;
break;
case PORT_IRQ_STAT:
val = pr->irq_stat;
break;
case PORT_IRQ_MASK:
val = pr->irq_mask;
break;
case PORT_CMD:
val = pr->cmd;
break;
case PORT_TFDATA:
val = pr->tfdata;
break;
case PORT_SIG:
val = pr->sig;
break;
case PORT_SCR_STAT:
if (s->dev[port].port.ifs[0].blk) {
val = SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP |
SATA_SCR_SSTATUS_SPD_GEN1 | SATA_SCR_SSTATUS_IPM_ACTIVE;
} else {
val = SATA_SCR_SSTATUS_DET_NODEV;
}
break;
case PORT_SCR_CTL:
val = pr->scr_ctl;
break;
case PORT_SCR_ERR:
val = pr->scr_err;
break;
case PORT_SCR_ACT:
pr->scr_act &= ~s->dev[port].finished;
s->dev[port].finished = 0;
val = pr->scr_act;
break;
case PORT_CMD_ISSUE:
val = pr->cmd_issue;
break;
case PORT_RESERVED:
default:
val = 0;
}
DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val);
return val;
}
static void ahci_irq_raise(AHCIState *s, AHCIDevice *dev)
{
AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
PCIDevice *pci_dev =
(PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE);
DPRINTF(0, "raise irq\n");
if (pci_dev && msi_enabled(pci_dev)) {
msi_notify(pci_dev, 0);
} else {
qemu_irq_raise(s->irq);
}
}
static void ahci_irq_lower(AHCIState *s, AHCIDevice *dev)
{
AHCIPCIState *d = container_of(s, AHCIPCIState, ahci);
PCIDevice *pci_dev =
(PCIDevice *)object_dynamic_cast(OBJECT(d), TYPE_PCI_DEVICE);
DPRINTF(0, "lower irq\n");
if (!pci_dev || !msi_enabled(pci_dev)) {
qemu_irq_lower(s->irq);
}
}
static void ahci_check_irq(AHCIState *s)
{
int i;
DPRINTF(-1, "check irq %#x\n", s->control_regs.irqstatus);
s->control_regs.irqstatus = 0;
for (i = 0; i < s->ports; i++) {
AHCIPortRegs *pr = &s->dev[i].port_regs;
if (pr->irq_stat & pr->irq_mask) {
s->control_regs.irqstatus |= (1 << i);
}
}
if (s->control_regs.irqstatus &&
(s->control_regs.ghc & HOST_CTL_IRQ_EN)) {
ahci_irq_raise(s, NULL);
} else {
ahci_irq_lower(s, NULL);
}
}
static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d,
int irq_type)
{
DPRINTF(d->port_no, "trigger irq %#x -> %x\n",
irq_type, d->port_regs.irq_mask & irq_type);
d->port_regs.irq_stat |= irq_type;
ahci_check_irq(s);
}
static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr,
uint32_t wanted)
{
hwaddr len = wanted;
if (*ptr) {
dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
}
*ptr = dma_memory_map(as, addr, &len, DMA_DIRECTION_FROM_DEVICE);
if (len < wanted) {
dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
*ptr = NULL;
}
}
static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
DPRINTF(port, "offset: 0x%x val: 0x%x\n", offset, val);
switch (offset) {
case PORT_LST_ADDR:
pr->lst_addr = val;
map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_LST_ADDR_HI:
pr->lst_addr_hi = val;
map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_FIS_ADDR:
pr->fis_addr = val;
map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_FIS_ADDR_HI:
pr->fis_addr_hi = val;
map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_IRQ_STAT:
pr->irq_stat &= ~val;
ahci_check_irq(s);
break;
case PORT_IRQ_MASK:
pr->irq_mask = val & 0xfdc000ff;
ahci_check_irq(s);
break;
case PORT_CMD:
pr->cmd = val & ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON);
if (pr->cmd & PORT_CMD_START) {
pr->cmd |= PORT_CMD_LIST_ON;
}
if (pr->cmd & PORT_CMD_FIS_RX) {
pr->cmd |= PORT_CMD_FIS_ON;
}
/* XXX usually the FIS would be pending on the bus here and
issuing deferred until the OS enables FIS receival.
Instead, we only submit it once - which works in most
cases, but is a hack. */
if ((pr->cmd & PORT_CMD_FIS_ON) &&
!s->dev[port].init_d2h_sent) {
ahci_init_d2h(&s->dev[port]);
s->dev[port].init_d2h_sent = true;
}
check_cmd(s, port);
break;
case PORT_TFDATA:
/* Read Only. */
break;
case PORT_SIG:
/* Read Only */
break;
case PORT_SCR_STAT:
/* Read Only */
break;
case PORT_SCR_CTL:
if (((pr->scr_ctl & AHCI_SCR_SCTL_DET) == 1) &&
((val & AHCI_SCR_SCTL_DET) == 0)) {
ahci_reset_port(s, port);
}
pr->scr_ctl = val;
break;
case PORT_SCR_ERR:
pr->scr_err &= ~val;
break;
case PORT_SCR_ACT:
/* RW1 */
pr->scr_act |= val;
break;
case PORT_CMD_ISSUE:
pr->cmd_issue |= val;
check_cmd(s, port);
break;
default:
break;
}
}
static uint64_t ahci_mem_read(void *opaque, hwaddr addr,
unsigned size)
{
AHCIState *s = opaque;
uint32_t val = 0;
if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) {
switch (addr) {
case HOST_CAP:
val = s->control_regs.cap;
break;
case HOST_CTL:
val = s->control_regs.ghc;
break;
case HOST_IRQ_STAT:
val = s->control_regs.irqstatus;
break;
case HOST_PORTS_IMPL:
val = s->control_regs.impl;
break;
case HOST_VERSION:
val = s->control_regs.version;
break;
}
DPRINTF(-1, "(addr 0x%08X), val 0x%08X\n", (unsigned) addr, val);
} else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
(addr < (AHCI_PORT_REGS_START_ADDR +
(s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) {
val = ahci_port_read(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
addr & AHCI_PORT_ADDR_OFFSET_MASK);
}
return val;
}
static void ahci_mem_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
AHCIState *s = opaque;
/* Only aligned reads are allowed on AHCI */
if (addr & 3) {
fprintf(stderr, "ahci: Mis-aligned write to addr 0x"
TARGET_FMT_plx "\n", addr);
return;
}
if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) {
DPRINTF(-1, "(addr 0x%08X), val 0x%08"PRIX64"\n", (unsigned) addr, val);
switch (addr) {
case HOST_CAP: /* R/WO, RO */
/* FIXME handle R/WO */
break;
case HOST_CTL: /* R/W */
if (val & HOST_CTL_RESET) {
DPRINTF(-1, "HBA Reset\n");
ahci_reset(s);
} else {
s->control_regs.ghc = (val & 0x3) | HOST_CTL_AHCI_EN;
ahci_check_irq(s);
}
break;
case HOST_IRQ_STAT: /* R/WC, RO */
s->control_regs.irqstatus &= ~val;
ahci_check_irq(s);
break;
case HOST_PORTS_IMPL: /* R/WO, RO */
/* FIXME handle R/WO */
break;
case HOST_VERSION: /* RO */
/* FIXME report write? */
break;
default:
DPRINTF(-1, "write to unknown register 0x%x\n", (unsigned)addr);
}
} else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
(addr < (AHCI_PORT_REGS_START_ADDR +
(s->ports * AHCI_PORT_ADDR_OFFSET_LEN)))) {
ahci_port_write(s, (addr - AHCI_PORT_REGS_START_ADDR) >> 7,
addr & AHCI_PORT_ADDR_OFFSET_MASK, val);
}
}
static const MemoryRegionOps ahci_mem_ops = {
.read = ahci_mem_read,
.write = ahci_mem_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t ahci_idp_read(void *opaque, hwaddr addr,
unsigned size)
{
AHCIState *s = opaque;
if (addr == s->idp_offset) {
/* index register */
return s->idp_index;
} else if (addr == s->idp_offset + 4) {
/* data register - do memory read at location selected by index */
return ahci_mem_read(opaque, s->idp_index, size);
} else {
return 0;
}
}
static void ahci_idp_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
AHCIState *s = opaque;
if (addr == s->idp_offset) {
/* index register - mask off reserved bits */
s->idp_index = (uint32_t)val & ((AHCI_MEM_BAR_SIZE - 1) & ~3);
} else if (addr == s->idp_offset + 4) {
/* data register - do memory write at location selected by index */
ahci_mem_write(opaque, s->idp_index, val, size);
}
}
static const MemoryRegionOps ahci_idp_ops = {
.read = ahci_idp_read,
.write = ahci_idp_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void ahci_reg_init(AHCIState *s)
{
int i;
s->control_regs.cap = (s->ports - 1) |
(AHCI_NUM_COMMAND_SLOTS << 8) |
(AHCI_SUPPORTED_SPEED_GEN1 << AHCI_SUPPORTED_SPEED) |
HOST_CAP_NCQ | HOST_CAP_AHCI;
s->control_regs.impl = (1 << s->ports) - 1;
s->control_regs.version = AHCI_VERSION_1_0;
for (i = 0; i < s->ports; i++) {
s->dev[i].port_state = STATE_RUN;
}
}
static void check_cmd(AHCIState *s, int port)
{
AHCIPortRegs *pr = &s->dev[port].port_regs;
int slot;
if ((pr->cmd & PORT_CMD_START) && pr->cmd_issue) {
for (slot = 0; (slot < 32) && pr->cmd_issue; slot++) {
if ((pr->cmd_issue & (1U << slot)) &&
!handle_cmd(s, port, slot)) {
pr->cmd_issue &= ~(1U << slot);
}
}
}
}
static void ahci_check_cmd_bh(void *opaque)
{
AHCIDevice *ad = opaque;
qemu_bh_delete(ad->check_bh);
ad->check_bh = NULL;
if ((ad->busy_slot != -1) &&
!(ad->port.ifs[0].status & (BUSY_STAT|DRQ_STAT))) {
/* no longer busy */
ad->port_regs.cmd_issue &= ~(1 << ad->busy_slot);
ad->busy_slot = -1;
}
check_cmd(ad->hba, ad->port_no);
}
static void ahci_init_d2h(AHCIDevice *ad)
{
uint8_t init_fis[20];
IDEState *ide_state = &ad->port.ifs[0];
memset(init_fis, 0, sizeof(init_fis));
init_fis[4] = 1;
init_fis[12] = 1;
if (ide_state->drive_kind == IDE_CD) {
init_fis[5] = ide_state->lcyl;
init_fis[6] = ide_state->hcyl;
}
ahci_write_fis_d2h(ad, init_fis);
}
static void ahci_reset_port(AHCIState *s, int port)
{
AHCIDevice *d = &s->dev[port];
AHCIPortRegs *pr = &d->port_regs;
IDEState *ide_state = &d->port.ifs[0];
int i;
DPRINTF(port, "reset port\n");
ide_bus_reset(&d->port);
ide_state->ncq_queues = AHCI_MAX_CMDS;
pr->scr_stat = 0;
pr->scr_err = 0;
pr->scr_act = 0;
pr->tfdata = 0x7F;
pr->sig = 0xFFFFFFFF;
d->busy_slot = -1;
d->init_d2h_sent = false;
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->blk) {
return;
}
/* reset ncq queue */
for (i = 0; i < AHCI_MAX_CMDS; i++) {
NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[i];
if (!ncq_tfs->used) {
continue;
}
if (ncq_tfs->aiocb) {
blk_aio_cancel(ncq_tfs->aiocb);
ncq_tfs->aiocb = NULL;
}
/* Maybe we just finished the request thanks to blk_aio_cancel() */
if (!ncq_tfs->used) {
continue;
}
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_tfs->used = 0;
}
s->dev[port].port_state = STATE_RUN;
if (!ide_state->blk) {
pr->sig = 0;
ide_state->status = SEEK_STAT | WRERR_STAT;
} else if (ide_state->drive_kind == IDE_CD) {
pr->sig = SATA_SIGNATURE_CDROM;
ide_state->lcyl = 0x14;
ide_state->hcyl = 0xeb;
DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl);
ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT;
} else {
pr->sig = SATA_SIGNATURE_DISK;
ide_state->status = SEEK_STAT | WRERR_STAT;
}
ide_state->error = 1;
ahci_init_d2h(d);
}
static void debug_print_fis(uint8_t *fis, int cmd_len)
{
#if DEBUG_AHCI
int i;
fprintf(stderr, "fis:");
for (i = 0; i < cmd_len; i++) {
if ((i & 0xf) == 0) {
fprintf(stderr, "\n%02x:",i);
}
fprintf(stderr, "%02x ",fis[i]);
}
fprintf(stderr, "\n");
#endif
}
static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
{
AHCIDevice *ad = &s->dev[port];
AHCIPortRegs *pr = &ad->port_regs;
IDEState *ide_state;
SDBFIS *sdb_fis;
if (!s->dev[port].res_fis ||
!(pr->cmd & PORT_CMD_FIS_RX)) {
return;
}
sdb_fis = (SDBFIS *)&ad->res_fis[RES_FIS_SDBFIS];
ide_state = &ad->port.ifs[0];
sdb_fis->type = SATA_FIS_TYPE_SDB;
/* Interrupt pending & Notification bit */
sdb_fis->flags = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0);
sdb_fis->status = ide_state->status & 0x77;
sdb_fis->error = ide_state->error;
/* update SAct field in SDB_FIS */
s->dev[port].finished |= finished;
sdb_fis->payload = cpu_to_le32(ad->finished);
/* Update shadow registers (except BSY 0x80 and DRQ 0x08) */
pr->tfdata = (ad->port.ifs[0].error << 8) |
(ad->port.ifs[0].status & 0x77) |
(pr->tfdata & 0x88);
ahci_trigger_irq(s, ad, PORT_IRQ_SDB_FIS);
}
static void ahci_write_fis_pio(AHCIDevice *ad, uint16_t len)
{
AHCIPortRegs *pr = &ad->port_regs;
uint8_t *pio_fis, *cmd_fis;
uint64_t tbl_addr;
dma_addr_t cmd_len = 0x80;
IDEState *s = &ad->port.ifs[0];
if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) {
return;
}
/* map cmd_fis */
tbl_addr = le64_to_cpu(ad->cur_cmd->tbl_addr);
cmd_fis = dma_memory_map(ad->hba->as, tbl_addr, &cmd_len,
DMA_DIRECTION_TO_DEVICE);
if (cmd_fis == NULL) {
DPRINTF(ad->port_no, "dma_memory_map failed in ahci_write_fis_pio");
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_HBUS_ERR);
return;
}
if (cmd_len != 0x80) {
DPRINTF(ad->port_no,
"dma_memory_map mapped too few bytes in ahci_write_fis_pio");
dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len,
DMA_DIRECTION_TO_DEVICE, cmd_len);
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_HBUS_ERR);
return;
}
pio_fis = &ad->res_fis[RES_FIS_PSFIS];
pio_fis[0] = SATA_FIS_TYPE_PIO_SETUP;
pio_fis[1] = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0);
pio_fis[2] = s->status;
pio_fis[3] = s->error;
pio_fis[4] = s->sector;
pio_fis[5] = s->lcyl;
pio_fis[6] = s->hcyl;
pio_fis[7] = s->select;
pio_fis[8] = s->hob_sector;
pio_fis[9] = s->hob_lcyl;
pio_fis[10] = s->hob_hcyl;
pio_fis[11] = 0;
pio_fis[12] = cmd_fis[12];
pio_fis[13] = cmd_fis[13];
pio_fis[14] = 0;
pio_fis[15] = s->status;
pio_fis[16] = len & 255;
pio_fis[17] = len >> 8;
pio_fis[18] = 0;
pio_fis[19] = 0;
/* Update shadow registers: */
pr->tfdata = (ad->port.ifs[0].error << 8) |
ad->port.ifs[0].status;
if (pio_fis[2] & ERR_STAT) {
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
}
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_PIOS_FIS);
dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len,
DMA_DIRECTION_TO_DEVICE, cmd_len);
}
static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
{
AHCIPortRegs *pr = &ad->port_regs;
uint8_t *d2h_fis;
int i;
dma_addr_t cmd_len = 0x80;
int cmd_mapped = 0;
IDEState *s = &ad->port.ifs[0];
if (!ad->res_fis || !(pr->cmd & PORT_CMD_FIS_RX)) {
return;
}
if (!cmd_fis) {
/* map cmd_fis */
uint64_t tbl_addr = le64_to_cpu(ad->cur_cmd->tbl_addr);
cmd_fis = dma_memory_map(ad->hba->as, tbl_addr, &cmd_len,
DMA_DIRECTION_TO_DEVICE);
cmd_mapped = 1;
}
d2h_fis = &ad->res_fis[RES_FIS_RFIS];
d2h_fis[0] = SATA_FIS_TYPE_REGISTER_D2H;
d2h_fis[1] = (ad->hba->control_regs.irqstatus ? (1 << 6) : 0);
d2h_fis[2] = s->status;
d2h_fis[3] = s->error;
d2h_fis[4] = s->sector;
d2h_fis[5] = s->lcyl;
d2h_fis[6] = s->hcyl;
d2h_fis[7] = s->select;
d2h_fis[8] = s->hob_sector;
d2h_fis[9] = s->hob_lcyl;
d2h_fis[10] = s->hob_hcyl;
d2h_fis[11] = 0;
d2h_fis[12] = cmd_fis[12];
d2h_fis[13] = cmd_fis[13];
for (i = 14; i < 20; i++) {
d2h_fis[i] = 0;
}
/* Update shadow registers: */
pr->tfdata = (ad->port.ifs[0].error << 8) |
ad->port.ifs[0].status;
if (d2h_fis[2] & ERR_STAT) {
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
}
ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
if (cmd_mapped) {
dma_memory_unmap(ad->hba->as, cmd_fis, cmd_len,
DMA_DIRECTION_TO_DEVICE, cmd_len);
}
}
static int prdt_tbl_entry_size(const AHCI_SG *tbl)
{
return (le32_to_cpu(tbl->flags_size) & AHCI_PRDT_SIZE_MASK) + 1;
}
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
static int ahci_populate_sglist(AHCIDevice *ad, QEMUSGList *sglist,
int32_t offset)
{
AHCICmdHdr *cmd = ad->cur_cmd;
uint32_t opts = le32_to_cpu(cmd->opts);
uint64_t prdt_addr = le64_to_cpu(cmd->tbl_addr) + 0x80;
int sglist_alloc_hint = opts >> AHCI_CMD_HDR_PRDT_LEN;
dma_addr_t prdt_len = (sglist_alloc_hint * sizeof(AHCI_SG));
dma_addr_t real_prdt_len = prdt_len;
uint8_t *prdt;
int i;
int r = 0;
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
uint64_t sum = 0;
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
int off_idx = -1;
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
int64_t off_pos = -1;
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
int tbl_entry_size;
IDEBus *bus = &ad->port;
BusState *qbus = BUS(bus);
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
/*
* Note: AHCI PRDT can describe up to 256GiB. SATA/ATA only support
* transactions of up to 32MiB as of ATA8-ACS3 rev 1b, assuming a
* 512 byte sector size. We limit the PRDT in this implementation to
* a reasonably large 2GiB, which can accommodate the maximum transfer
* request for sector sizes up to 32K.
*/
if (!sglist_alloc_hint) {
DPRINTF(ad->port_no, "no sg list given by guest: 0x%08x\n", opts);
return -1;
}
/* map PRDT */
if (!(prdt = dma_memory_map(ad->hba->as, prdt_addr, &prdt_len,
DMA_DIRECTION_TO_DEVICE))){
DPRINTF(ad->port_no, "map failed\n");
return -1;
}
if (prdt_len < real_prdt_len) {
DPRINTF(ad->port_no, "mapped less than expected\n");
r = -1;
goto out;
}
/* Get entries in the PRDT, init a qemu sglist accordingly */
if (sglist_alloc_hint > 0) {
AHCI_SG *tbl = (AHCI_SG *)prdt;
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
sum = 0;
for (i = 0; i < sglist_alloc_hint; i++) {
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
/* flags_size is zero-based */
tbl_entry_size = prdt_tbl_entry_size(&tbl[i]);
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
if (offset <= (sum + tbl_entry_size)) {
off_idx = i;
off_pos = offset - sum;
break;
}
sum += tbl_entry_size;
}
if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
DPRINTF(ad->port_no, "%s: Incorrect offset! "
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
"off_idx: %d, off_pos: %"PRId64"\n",
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
__func__, off_idx, off_pos);
r = -1;
goto out;
}
qemu_sglist_init(sglist, qbus->parent, (sglist_alloc_hint - off_idx),
ad->hba->as);
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
qemu_sglist_add(sglist, le64_to_cpu(tbl[off_idx].addr + off_pos),
prdt_tbl_entry_size(&tbl[off_idx]) - off_pos);
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
for (i = off_idx + 1; i < sglist_alloc_hint; i++) {
/* flags_size is zero-based */
qemu_sglist_add(sglist, le64_to_cpu(tbl[i].addr),
prdt_tbl_entry_size(&tbl[i]));
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
if (sglist->size > INT32_MAX) {
error_report("AHCI Physical Region Descriptor Table describes "
"more than 2 GiB.\n");
qemu_sglist_destroy(sglist);
r = -1;
goto out;
}
}
}
out:
dma_memory_unmap(ad->hba->as, prdt, prdt_len,
DMA_DIRECTION_TO_DEVICE, prdt_len);
return r;
}
static void ncq_cb(void *opaque, int ret)
{
NCQTransferState *ncq_tfs = (NCQTransferState *)opaque;
IDEState *ide_state = &ncq_tfs->drive->port.ifs[0];
if (ret == -ECANCELED) {
return;
}
/* Clear bit for this tag in SActive */
ncq_tfs->drive->port_regs.scr_act &= ~(1 << ncq_tfs->tag);
if (ret < 0) {
/* error */
ide_state->error = ABRT_ERR;
ide_state->status = READY_STAT | ERR_STAT;
ncq_tfs->drive->port_regs.scr_err |= (1 << ncq_tfs->tag);
} else {
ide_state->status = READY_STAT | SEEK_STAT;
}
ahci_write_fis_sdb(ncq_tfs->drive->hba, ncq_tfs->drive->port_no,
(1 << ncq_tfs->tag));
DPRINTF(ncq_tfs->drive->port_no, "NCQ transfer tag %d finished\n",
ncq_tfs->tag);
block_acct_done(blk_get_stats(ncq_tfs->drive->port.ifs[0].blk),
&ncq_tfs->acct);
qemu_sglist_destroy(&ncq_tfs->sglist);
ncq_tfs->used = 0;
}
static int is_ncq(uint8_t ata_cmd)
{
/* Based on SATA 3.2 section 13.6.3.2 */
switch (ata_cmd) {
case READ_FPDMA_QUEUED:
case WRITE_FPDMA_QUEUED:
case NCQ_NON_DATA:
case RECEIVE_FPDMA_QUEUED:
case SEND_FPDMA_QUEUED:
return 1;
default:
return 0;
}
}
static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
int slot)
{
NCQFrame *ncq_fis = (NCQFrame*)cmd_fis;
uint8_t tag = ncq_fis->tag >> 3;
NCQTransferState *ncq_tfs = &s->dev[port].ncq_tfs[tag];
if (ncq_tfs->used) {
/* error - already in use */
fprintf(stderr, "%s: tag %d already used\n", __FUNCTION__, tag);
return;
}
ncq_tfs->used = 1;
ncq_tfs->drive = &s->dev[port];
ncq_tfs->slot = slot;
ncq_tfs->lba = ((uint64_t)ncq_fis->lba5 << 40) |
((uint64_t)ncq_fis->lba4 << 32) |
((uint64_t)ncq_fis->lba3 << 24) |
((uint64_t)ncq_fis->lba2 << 16) |
((uint64_t)ncq_fis->lba1 << 8) |
(uint64_t)ncq_fis->lba0;
/* Note: We calculate the sector count, but don't currently rely on it.
* The total size of the DMA buffer tells us the transfer size instead. */
ncq_tfs->sector_count = ((uint16_t)ncq_fis->sector_count_high << 8) |
ncq_fis->sector_count_low;
DPRINTF(port, "NCQ transfer LBA from %"PRId64" to %"PRId64", "
"drive max %"PRId64"\n",
ncq_tfs->lba, ncq_tfs->lba + ncq_tfs->sector_count - 2,
s->dev[port].port.ifs[0].nb_sectors - 1);
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
ahci_populate_sglist(&s->dev[port], &ncq_tfs->sglist, 0);
ncq_tfs->tag = tag;
switch(ncq_fis->command) {
case READ_FPDMA_QUEUED:
DPRINTF(port, "NCQ reading %d sectors from LBA %"PRId64", "
"tag %d\n",
ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag);
DPRINTF(port, "tag %d aio read %"PRId64"\n",
ncq_tfs->tag, ncq_tfs->lba);
dma_acct_start(ncq_tfs->drive->port.ifs[0].blk, &ncq_tfs->acct,
&ncq_tfs->sglist, BLOCK_ACCT_READ);
ncq_tfs->aiocb = dma_blk_read(ncq_tfs->drive->port.ifs[0].blk,
&ncq_tfs->sglist, ncq_tfs->lba,
ncq_cb, ncq_tfs);
break;
case WRITE_FPDMA_QUEUED:
DPRINTF(port, "NCQ writing %d sectors to LBA %"PRId64", tag %d\n",
ncq_tfs->sector_count-1, ncq_tfs->lba, ncq_tfs->tag);
DPRINTF(port, "tag %d aio write %"PRId64"\n",
ncq_tfs->tag, ncq_tfs->lba);
dma_acct_start(ncq_tfs->drive->port.ifs[0].blk, &ncq_tfs->acct,
&ncq_tfs->sglist, BLOCK_ACCT_WRITE);
ncq_tfs->aiocb = dma_blk_write(ncq_tfs->drive->port.ifs[0].blk,
&ncq_tfs->sglist, ncq_tfs->lba,
ncq_cb, ncq_tfs);
break;
default:
if (is_ncq(cmd_fis[2])) {
DPRINTF(port,
"error: unsupported NCQ command (0x%02x) received\n",
cmd_fis[2]);
} else {
DPRINTF(port,
"error: tried to process non-NCQ command as NCQ\n");
}
qemu_sglist_destroy(&ncq_tfs->sglist);
}
}
static void handle_reg_h2d_fis(AHCIState *s, int port,
int slot, uint8_t *cmd_fis)
{
IDEState *ide_state = &s->dev[port].port.ifs[0];
AHCICmdHdr *cmd = s->dev[port].cur_cmd;
uint32_t opts = le32_to_cpu(cmd->opts);
if (cmd_fis[1] & 0x0F) {
DPRINTF(port, "Port Multiplier not supported."
" cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
cmd_fis[0], cmd_fis[1], cmd_fis[2]);
return;
}
if (cmd_fis[1] & 0x70) {
DPRINTF(port, "Reserved flags set in H2D Register FIS."
" cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
cmd_fis[0], cmd_fis[1], cmd_fis[2]);
return;
}
if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) {
switch (s->dev[port].port_state) {
case STATE_RUN:
if (cmd_fis[15] & ATA_SRST) {
s->dev[port].port_state = STATE_RESET;
}
break;
case STATE_RESET:
if (!(cmd_fis[15] & ATA_SRST)) {
ahci_reset_port(s, port);
}
break;
}
return;
}
/* Check for NCQ command */
if (is_ncq(cmd_fis[2])) {
process_ncq_command(s, port, cmd_fis, slot);
return;
}
/* Decompose the FIS:
* AHCI does not interpret FIS packets, it only forwards them.
* SATA 1.0 describes how to decode LBA28 and CHS FIS packets.
* Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets.
*
* ATA4 describes sector number for LBA28/CHS commands.
* ATA6 describes sector number for LBA48 commands.
* ATA8 deprecates CHS fully, describing only LBA28/48.
*
* We dutifully convert the FIS into IDE registers, and allow the
* core layer to interpret them as needed. */
ide_state->feature = cmd_fis[3];
ide_state->sector = cmd_fis[4]; /* LBA 7:0 */
ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */
ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */
ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */
ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */
ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */
ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */
ide_state->hob_feature = cmd_fis[11];
ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
/* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */
/* 15: Only valid when UPDATE_COMMAND not set. */
/* Copy the ACMD field (ATAPI packet, if any) from the AHCI command
* table to ide_state->io_buffer */
if (opts & AHCI_CMD_ATAPI) {
memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
debug_print_fis(ide_state->io_buffer, 0x10);
s->dev[port].done_atapi_packet = false;
/* XXX send PIO setup FIS */
}
ide_state->error = 0;
/* Reset transferred byte counter */
cmd->status = 0;
/* We're ready to process the command in FIS byte 2. */
ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
}
static int handle_cmd(AHCIState *s, int port, int slot)
{
IDEState *ide_state;
uint64_t tbl_addr;
AHCICmdHdr *cmd;
uint8_t *cmd_fis;
dma_addr_t cmd_len;
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* Engine currently busy, try again later */
DPRINTF(port, "engine busy\n");
return -1;
}
if (!s->dev[port].lst) {
DPRINTF(port, "error: lst not given but cmd handled");
return -1;
}
cmd = &((AHCICmdHdr *)s->dev[port].lst)[slot];
/* remember current slot handle for later */
s->dev[port].cur_cmd = cmd;
/* The device we are working for */
ide_state = &s->dev[port].port.ifs[0];
if (!ide_state->blk) {
DPRINTF(port, "error: guest accessed unused port");
return -1;
}
tbl_addr = le64_to_cpu(cmd->tbl_addr);
cmd_len = 0x80;
cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len,
DMA_DIRECTION_FROM_DEVICE);
if (!cmd_fis) {
DPRINTF(port, "error: guest passed us an invalid cmd fis\n");
return -1;
} else if (cmd_len != 0x80) {
ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_HBUS_ERR);
DPRINTF(port, "error: dma_memory_map failed: "
"(len(%02"PRIx64") != 0x80)\n",
cmd_len);
goto out;
}
debug_print_fis(cmd_fis, 0x80);
switch (cmd_fis[0]) {
case SATA_FIS_TYPE_REGISTER_H2D:
handle_reg_h2d_fis(s, port, slot, cmd_fis);
break;
default:
DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
"cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
cmd_fis[2]);
break;
}
out:
dma_memory_unmap(s->as, cmd_fis, cmd_len, DMA_DIRECTION_FROM_DEVICE,
cmd_len);
if (s->dev[port].port.ifs[0].status & (BUSY_STAT|DRQ_STAT)) {
/* async command, complete later */
s->dev[port].busy_slot = slot;
return -1;
}
/* done handling the command */
return 0;
}
/* DMA dev <-> ram */
static void ahci_start_transfer(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
uint32_t size = (uint32_t)(s->data_end - s->data_ptr);
/* write == ram -> device */
uint32_t opts = le32_to_cpu(ad->cur_cmd->opts);
int is_write = opts & AHCI_CMD_WRITE;
int is_atapi = opts & AHCI_CMD_ATAPI;
int has_sglist = 0;
if (is_atapi && !ad->done_atapi_packet) {
/* already prepopulated iobuffer */
ad->done_atapi_packet = true;
size = 0;
goto out;
}
if (ahci_dma_prepare_buf(dma, is_write)) {
has_sglist = 1;
}
DPRINTF(ad->port_no, "%sing %d bytes on %s w/%s sglist\n",
is_write ? "writ" : "read", size, is_atapi ? "atapi" : "ata",
has_sglist ? "" : "o");
if (has_sglist && size) {
if (is_write) {
dma_buf_write(s->data_ptr, size, &s->sg);
} else {
dma_buf_read(s->data_ptr, size, &s->sg);
}
}
out:
/* declare that we processed everything */
s->data_ptr = s->data_end;
/* Update number of transferred bytes, destroy sglist */
ahci_commit_buf(dma, size);
s->end_transfer_func(s);
if (!(s->status & DRQ_STAT)) {
/* done with PIO send/receive */
ahci_write_fis_pio(ad, le32_to_cpu(ad->cur_cmd->status));
}
}
static void ahci_start_dma(IDEDMA *dma, IDEState *s,
BlockCompletionFunc *dma_cb)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
DPRINTF(ad->port_no, "\n");
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
s->io_buffer_offset = 0;
dma_cb(s, 0);
}
static void ahci_restart_dma(IDEDMA *dma)
{
/* Nothing to do, ahci_start_dma already resets s->io_buffer_offset. */
}
/**
* Called in DMA R/W chains to read the PRDT, utilizing ahci_populate_sglist.
* Not currently invoked by PIO R/W chains,
* which invoke ahci_populate_sglist via ahci_start_transfer.
*/
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
static int32_t ahci_dma_prepare_buf(IDEDMA *dma, int is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset) == -1) {
DPRINTF(ad->port_no, "ahci_dma_prepare_buf failed.\n");
return -1;
}
s->io_buffer_size = s->sg.size;
DPRINTF(ad->port_no, "len=%#x\n", s->io_buffer_size);
ide: Correct handling of malformed/short PRDTs This impacts both BMDMA and AHCI HBA interfaces for IDE. Currently, we confuse the difference between a PRDT having "0 bytes" and a PRDT having "0 complete sectors." When we receive an incomplete sector, inconsistent error checking leads to an infinite loop wherein the call succeeds, but it didn't give us enough bytes -- leading us to re-call the DMA chain over and over again. This leads to, in the BMDMA case, leaked memory for short PRDTs, and infinite loops and resource usage in the AHCI case. The .prepare_buf() callback is reworked to return the number of bytes that it successfully prepared. 0 is a valid, non-error answer that means the table was empty and described no bytes. -1 indicates an error. Our current implementation uses the io_buffer in IDEState to ultimately describe the size of a prepared scatter-gather list. Even though the AHCI PRDT/SGList can be as large as 256GiB, the AHCI command header limits transactions to just 4GiB. ATA8-ACS3, however, defines the largest transaction to be an LBA48 command that transfers 65,536 sectors. With a 512 byte sector size, this is just 32MiB. Since our current state structures use the int type to describe the size of the buffer, and this state is migrated as int32, we are limited to describing 2GiB buffer sizes unless we change the migration protocol. For this reason, this patch begins to unify the assertions in the IDE pathways that the scatter-gather list provided by either the AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum, 2GiB. This should be resilient enough unless we need a sector size that exceeds 32KiB. Further, the likelihood of any guest operating system actually attempting to transfer this much data in a single operation is very slim. To this end, the IDEState variables have been updated to more explicitly clarify our maximum supported size. Callers to the prepare_buf callback have been reworked to understand the new return code, and all versions of the prepare_buf callback have been adjusted accordingly. Lastly, the ahci_populate_sglist helper, relied upon by the AHCI implementation of .prepare_buf() as well as the PCI implementation of the callback have had overflow assertions added to help make clear the reasonings behind the various type changes. [Added %d -> %"PRId64" fix John sent because off_pos changed from int to int64_t. --Stefan] Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-31 21:03:39 +01:00
return s->io_buffer_size;
}
/**
* Destroys the scatter-gather list,
* and updates the command header with a bytes-read value.
* called explicitly via ahci_dma_rw_buf (ATAPI DMA),
* and ahci_start_transfer (PIO R/W),
* and called via callback from ide_dma_cb for DMA R/W paths.
*/
static void ahci_commit_buf(IDEDMA *dma, uint32_t tx_bytes)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
tx_bytes += le32_to_cpu(ad->cur_cmd->status);
ad->cur_cmd->status = cpu_to_le32(tx_bytes);
qemu_sglist_destroy(&s->sg);
}
static int ahci_dma_rw_buf(IDEDMA *dma, int is_write)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
IDEState *s = &ad->port.ifs[0];
uint8_t *p = s->io_buffer + s->io_buffer_index;
int l = s->io_buffer_size - s->io_buffer_index;
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
if (ahci_populate_sglist(ad, &s->sg, s->io_buffer_offset)) {
return 0;
}
if (is_write) {
dma_buf_read(p, l, &s->sg);
} else {
dma_buf_write(p, l, &s->sg);
}
/* free sglist, update byte count */
ahci_commit_buf(dma, l);
s->io_buffer_index += l;
ahci: Fix ahci cdrom read corruptions for reads > 128k While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-03 21:57:06 +02:00
s->io_buffer_offset += l;
DPRINTF(ad->port_no, "len=%#x\n", l);
return 1;
}
static void ahci_cmd_done(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
DPRINTF(ad->port_no, "cmd done\n");
/* update d2h status */
ahci_write_fis_d2h(ad, NULL);
if (!ad->check_bh) {
/* maybe we still have something to process, check later */
ad->check_bh = qemu_bh_new(ahci_check_cmd_bh, ad);
qemu_bh_schedule(ad->check_bh);
}
}
static void ahci_irq_set(void *opaque, int n, int level)
{
}
static const IDEDMAOps ahci_dma_ops = {
.start_dma = ahci_start_dma,
.restart_dma = ahci_restart_dma,
.start_transfer = ahci_start_transfer,
.prepare_buf = ahci_dma_prepare_buf,
.commit_buf = ahci_commit_buf,
.rw_buf = ahci_dma_rw_buf,
.cmd_done = ahci_cmd_done,
};
void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports)
{
qemu_irq *irqs;
int i;
s->as = as;
s->ports = ports;
s->dev = g_new0(AHCIDevice, ports);
ahci_reg_init(s);
/* XXX BAR size should be 1k, but that breaks, so bump it to 4k for now */
memory_region_init_io(&s->mem, OBJECT(qdev), &ahci_mem_ops, s,
"ahci", AHCI_MEM_BAR_SIZE);
memory_region_init_io(&s->idp, OBJECT(qdev), &ahci_idp_ops, s,
"ahci-idp", 32);
irqs = qemu_allocate_irqs(ahci_irq_set, s, s->ports);
for (i = 0; i < s->ports; i++) {
AHCIDevice *ad = &s->dev[i];
ide_bus_new(&ad->port, sizeof(ad->port), qdev, i, 1);
ide_init2(&ad->port, irqs[i]);
ad->hba = s;
ad->port_no = i;
ad->port.dma = &ad->dma;
ad->port.dma->ops = &ahci_dma_ops;
ide_register_restart_cb(&ad->port);
}
}
void ahci_uninit(AHCIState *s)
{
g_free(s->dev);
}
void ahci_reset(AHCIState *s)
{
AHCIPortRegs *pr;
int i;
s->control_regs.irqstatus = 0;
/* AHCI Enable (AE)
* The implementation of this bit is dependent upon the value of the
* CAP.SAM bit. If CAP.SAM is '0', then GHC.AE shall be read-write and
* shall have a reset value of '0'. If CAP.SAM is '1', then AE shall be
* read-only and shall have a reset value of '1'.
*
* We set HOST_CAP_AHCI so we must enable AHCI at reset.
*/
s->control_regs.ghc = HOST_CTL_AHCI_EN;
for (i = 0; i < s->ports; i++) {
pr = &s->dev[i].port_regs;
pr->irq_stat = 0;
pr->irq_mask = 0;
pr->scr_ctl = 0;
pr->cmd = PORT_CMD_SPIN_UP | PORT_CMD_POWER_ON;
ahci_reset_port(s, i);
}
}
static const VMStateDescription vmstate_ahci_device = {
.name = "ahci port",
.version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_IDE_BUS(port, AHCIDevice),
VMSTATE_IDE_DRIVE(port.ifs[0], AHCIDevice),
VMSTATE_UINT32(port_state, AHCIDevice),
VMSTATE_UINT32(finished, AHCIDevice),
VMSTATE_UINT32(port_regs.lst_addr, AHCIDevice),
VMSTATE_UINT32(port_regs.lst_addr_hi, AHCIDevice),
VMSTATE_UINT32(port_regs.fis_addr, AHCIDevice),
VMSTATE_UINT32(port_regs.fis_addr_hi, AHCIDevice),
VMSTATE_UINT32(port_regs.irq_stat, AHCIDevice),
VMSTATE_UINT32(port_regs.irq_mask, AHCIDevice),
VMSTATE_UINT32(port_regs.cmd, AHCIDevice),
VMSTATE_UINT32(port_regs.tfdata, AHCIDevice),
VMSTATE_UINT32(port_regs.sig, AHCIDevice),
VMSTATE_UINT32(port_regs.scr_stat, AHCIDevice),
VMSTATE_UINT32(port_regs.scr_ctl, AHCIDevice),
VMSTATE_UINT32(port_regs.scr_err, AHCIDevice),
VMSTATE_UINT32(port_regs.scr_act, AHCIDevice),
VMSTATE_UINT32(port_regs.cmd_issue, AHCIDevice),
VMSTATE_BOOL(done_atapi_packet, AHCIDevice),
VMSTATE_INT32(busy_slot, AHCIDevice),
VMSTATE_BOOL(init_d2h_sent, AHCIDevice),
VMSTATE_END_OF_LIST()
},
};
static int ahci_state_post_load(void *opaque, int version_id)
{
int i;
struct AHCIDevice *ad;
AHCIState *s = opaque;
for (i = 0; i < s->ports; i++) {
ad = &s->dev[i];
AHCIPortRegs *pr = &ad->port_regs;
map_page(s->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
map_page(s->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
/*
* If an error is present, ad->busy_slot will be valid and not -1.
* In this case, an operation is waiting to resume and will re-check
* for additional AHCI commands to execute upon completion.
*
* In the case where no error was present, busy_slot will be -1,
* and we should check to see if there are additional commands waiting.
*/
if (ad->busy_slot == -1) {
check_cmd(s, i);
} else {
/* We are in the middle of a command, and may need to access
* the command header in guest memory again. */
if (ad->busy_slot < 0 || ad->busy_slot >= AHCI_MAX_CMDS) {
return -1;
}
ad->cur_cmd = &((AHCICmdHdr *)ad->lst)[ad->busy_slot];
}
}
return 0;
}
const VMStateDescription vmstate_ahci = {
.name = "ahci",
.version_id = 1,
.post_load = ahci_state_post_load,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_VARRAY_POINTER_INT32(dev, AHCIState, ports,
vmstate_ahci_device, AHCIDevice),
VMSTATE_UINT32(control_regs.cap, AHCIState),
VMSTATE_UINT32(control_regs.ghc, AHCIState),
VMSTATE_UINT32(control_regs.irqstatus, AHCIState),
VMSTATE_UINT32(control_regs.impl, AHCIState),
VMSTATE_UINT32(control_regs.version, AHCIState),
VMSTATE_UINT32(idp_index, AHCIState),
VMSTATE_INT32_EQUAL(ports, AHCIState),
VMSTATE_END_OF_LIST()
},
};
#define TYPE_SYSBUS_AHCI "sysbus-ahci"
#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
typedef struct SysbusAHCIState {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
AHCIState ahci;
uint32_t num_ports;
} SysbusAHCIState;
static const VMStateDescription vmstate_sysbus_ahci = {
.name = "sysbus-ahci",
.unmigratable = 1, /* Still buggy under I/O load */
.fields = (VMStateField[]) {
VMSTATE_AHCI(ahci, SysbusAHCIState),
VMSTATE_END_OF_LIST()
},
};
static void sysbus_ahci_reset(DeviceState *dev)
{
SysbusAHCIState *s = SYSBUS_AHCI(dev);
ahci_reset(&s->ahci);
}
static void sysbus_ahci_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
SysbusAHCIState *s = SYSBUS_AHCI(dev);
ahci_init(&s->ahci, dev, &address_space_memory, s->num_ports);
sysbus_init_mmio(sbd, &s->ahci.mem);
sysbus_init_irq(sbd, &s->ahci.irq);
}
static Property sysbus_ahci_properties[] = {
DEFINE_PROP_UINT32("num-ports", SysbusAHCIState, num_ports, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void sysbus_ahci_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = sysbus_ahci_realize;
dc->vmsd = &vmstate_sysbus_ahci;
dc->props = sysbus_ahci_properties;
dc->reset = sysbus_ahci_reset;
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
}
static const TypeInfo sysbus_ahci_info = {
.name = TYPE_SYSBUS_AHCI,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SysbusAHCIState),
.class_init = sysbus_ahci_class_init,
};
static void sysbus_ahci_register_types(void)
{
type_register_static(&sysbus_ahci_info);
}
type_init(sysbus_ahci_register_types)
void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd)
{
AHCIPCIState *d = ICH_AHCI(dev);
AHCIState *ahci = &d->ahci;
int i;
for (i = 0; i < ahci->ports; i++) {
if (hd[i] == NULL) {
continue;
}
ide_create_drive(&ahci->dev[i].port, 0, hd[i]);
}
}