The illegal suffix behavior matches what was observed in a
POWER10 DD2.0 machine.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-6-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With prefixed instructions, the number of instructions
remaining until the page crossing is no longer constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These will be used by the decodetree trans_* functions
to early-exit when the instruction set is not enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210601193528.2533031-2-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only difference in the code for Instruction fetch, Data load and
Data store TLB miss errors is that when called from an unsupported
processor (i.e. not one of 602, 603, 603e, G2, 7x5 or 74xx), they
abort with a message specific to the operation type (insn fetch, data
load/store).
If a processor does not support those interrupts we should not be
registering them in init_excp_<proc> to begin with, so that error
message would never be used.
I'm leaving the message in for completeness, but making it generic and
consolidating the three interrupts into the same case statement body.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210601214649.785647-4-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is identical to dump_syscall, so use the latter for
system call vectored as well.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210601214649.785647-3-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Followed the suggested overhaul to store_fpscr logic, and moved it to
cpu.c where it can be accessed in !TCG builds.
The overhaul was suggested because storing a value to fpscr should
never raise an exception, so we could remove all the mess that happened
with POWERPC_EXCP_FP.
We also moved fpscr_set_rounding_mode into cpu.c as it could now be moved
there, and it is needed when a value for the fpscr is being stored
directly.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210527163522.23019-1-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This feature will no longer be useful as ppc moves to using decodetree
for TCG. And building with it enabled is no longer possible, due to
changes in opc_handler_t. Since the last commit that mentions it
happened in 2014, I think it is safe to remove it.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
since both, PPC_DO_STATISTICS and PPC_DUMP_CPU, are obsoleted as
target/ppc moves to decodetree, we can remove this ifdef based decision
tree, and only have what is now the standard option for the macro.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-4-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Documented the removal of the HMP command info cpustats
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210531145629.21300-3-bruno.larsen@eldorado.org.br>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Lucas Mateus <lucas.araujo@eldorado.org.br>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Fix a Sphinx formatting error]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
No more architectures set the pointer to dump_statistics, so there's no
point in keeping it, or the related cpu_dump_statistics function.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-6-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210531145629.21300-2-bruno.larsen@eldorado.org.br>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU is failing to launch a CGS pSeries guest in a host that has PEF
support:
qemu-system-ppc64: ../softmmu/vl.c:2585: qemu_machine_creation_done: Assertion `machine->cgs->ready' failed.
Aborted
This is happening because we're not setting the cgs->ready flag that is
asserted in qemu_machine_creation_done() during machine start.
cgs->ready is set in s390_pv_kvm_init() and sev_kvm_init(). Let's set it
in kvmppc_svm_init() as well.
Reported-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210528201619.52363-1-danielhb413@gmail.com>
Acked-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since ppc was the last architecture to collect these statistics and
it is currently phasing this collection out, the command that would query
this information is being removed.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-5-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Removed the commented out definition and all ifdefs relating to
PPC_DUMP_STATISTICS, as it's hardly ever used.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-4-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function requires surce code modification to be useful, which means
it probably is not used often, and the move to using decodetree means
the statistics won't even be collected anymore.
Also removed setting dump_statistics in ppc_cpu_realize, since it was
only useful when in conjunction with ppc_cpu_dump_statistics.
Suggested-by: Richard Henderson<richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526202104.127910-3-bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
updated build file to not compile some sources that are unnecessary if
TCG is disabled on the system.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-5-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Created a file with stubs needed to compile disabling TCG. *_ppc_opcodes
were created to make cpu_init.c have a few less ifdefs, since they are
not needed. softmmu_resize_hpt_* have to be created because the compiler
can't automatically know they aren't used, but they should never be
reached.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
excp_helper.c, mmu-hash64.c and mmu_helper.c have some function
declarations that are TCG-only, and couldn't be easily moved to a
TCG only file, so ifdefs were added around them.
We also needed ifdefs around some header files because helper-proto.h
includes trace/generated-helpers.h, which is never created when building
without TCG, and cpu_ldst.h includes tcg/tcg.h, whose containing folder
is not included as a -iquote. As future cleanup, we could change the
part of the configuration script to add those.
cpu_init.c also had a callback definition that is TCG only and could be
removed as part of a future cleanup (all the dump_statistics part is
almost never used and will become obsolete as we transition to using
decodetree).
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210525115355.8254-3-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The write calback decision when registering the MAS SPR has been turned
into a ternary operation, rather than an if-then-else block.
This was done because when building without TCG, even though the
compiler will optimize away the pointers to spr_write_generic*, it
doesn't optimize away the decision and assignment to the local pointer,
creating compiler errors. This cleanup looked better than using ifdefs,
so we decided to with it.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210525115355.8254-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TCG does not keep track of AIL mode in a central place, it's based on
the current LPCR[AIL] bits. Synchronize the new CPU's LPCR to the
current LPCR in rtas_start_cpu(), similarly to the way the ILE bit is
synchronized.
Open-code the ILE setting as well now that the caller's LPCR is
available directly, there is no need for the indirection.
Without this, under both TCG and KVM, adding a POWER8/9/10 class CPU
with a new core ID after a modern Linux has booted results in the new
CPU's LPCR missing the LPCR[AIL]=0b11 setting that the other CPUs have.
This can cause crashes and unexpected behaviour.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-3-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 47a9b55154 ("spapr: Clean up handling of LPCR power-saving exit
bits") moved this logic but did not remove the comment from the
previous location.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20210526091626.3388262-2-npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc_store_ptcr, defined in mmu_helper.c, was only used by
helper_store_ptcr, in misc_helper.c. To avoid possible confusion,
the function was folded into the helper.
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Message-Id: <20210526143516.125582-1-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The FDT code is adding the pmem root node by name "persistent-memory"
which should have been "ibm,persistent-memory".
The linux fetches the device tree nodes by type and it has been working
correctly as the type is correct. If someone searches by its intended
name it would fail, so fix that.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162204278956.219.9061511386011411578.stgit@cc493db1e665>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The subsequent patches add definitions which tend to get
the compilation to cyclic dependency. So, prepare with
forward declarations, move the definitions and clean up.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Message-Id: <162133925415.610.11584121797866216417.stgit@4f1e6f2bd33e>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With upstream kernel, especially after commit 98ba956f6a389
("powerpc/pseries/eeh: Rework device EEH PE determination") we see that KVM
guest isn't able to enable EEH option for PCI pass-through devices anymore.
[root@atest-guest ~]# dmesg | grep EEH
[ 0.032337] EEH: pSeries platform initialized
[ 0.298207] EEH: No capable adapters found: recovery disabled.
[root@atest-guest ~]#
So far the linux kernel was assuming pe_config_addr equal to device's
config_addr and using it to enable EEH on the PE through ibm,set-eeh-option
RTAS call. Which wasn't the correct way as per PAPR. The linux kernel
commit 98ba956f6a389 fixed this flow. With that fixed, linux now uses PE
config address returned by ibm,get-config-addr-info2 RTAS call to enable
EEH option per-PE basis instead of per-device basis. However this has
uncovered a bug in qemu where ibm,set-eeh-option is treating PE config
address as per-device config address.
Hence in qemu guest with recent kernel the ibm,set-eeh-option RTAS call
fails with -3 return value indicating that there is no PCI device exist for
the specified PE config address. The rtas_ibm_set_eeh_option call uses
pci_find_device() to get the PC device that matches specific bus and devfn
extracted from PE config address passed as argument. Thus it tries to map
the PE config address to a single specific PCI device 'bus->devices[devfn]'
which always results into checking device on slot 0 'bus->devices[0]'.
This succeeds when there is a pass-through device (vfio-pci) present on
slot 0. But in cases where there is no pass-through device present in slot
0, but present in non-zero slots, ibm,set-eeh-option call fails to enable
the EEH capability.
hw/ppc/spapr_pci_vfio.c: spapr_phb_vfio_eeh_set_option()
case RTAS_EEH_ENABLE: {
PCIHostState *phb;
PCIDevice *pdev;
/*
* The EEH functionality is enabled on basis of PCI device,
* instead of PE. We need check the validity of the PCI
* device address.
*/
phb = PCI_HOST_BRIDGE(sphb);
pdev = pci_find_device(phb->bus,
(addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
return RTAS_OUT_PARAM_ERROR;
}
hw/pci/pci.c:pci_find_device()
PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn)
{
bus = pci_find_bus_nr(bus, bus_num);
if (!bus)
return NULL;
return bus->devices[devfn];
}
This patch fixes ibm,set-eeh-option to check for presence of any PCI device
(vfio-pci) under specified bus and enable the EEH if found. The current
code already makes sure that all the devices on that bus are from same
iommu group (within same PE) and fail very early if it does not.
After this fix guest is able to find EEH capable devices and enable EEH
recovery on it.
[root@atest-guest ~]# dmesg | grep EEH
[ 0.048139] EEH: pSeries platform initialized
[ 0.405115] EEH: Capable adapter found: recovery enabled.
[root@atest-guest ~]#
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Message-Id: <162158429107.145117.5843504911924013125.stgit@jupiter>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU 6.0 moved all the -boot variables to the machine. Especially, the
removal of the boot_order static changed the handling of '-boot once'
from:
if (boot_once) {
qemu_boot_set(boot_once, &error_fatal);
qemu_register_reset(restore_boot_order, g_strdup(boot_order));
}
to
if (current_machine->boot_once) {
qemu_boot_set(current_machine->boot_once, &error_fatal);
qemu_register_reset(restore_boot_order,
g_strdup(current_machine->boot_order));
}
This means that we now register as subsequent boot order a copy
of current_machine->boot_once that was just set with the previous
call to qemu_boot_set(), i.e. we never transition away from the
once boot order.
It is certainly fragile^Wwrong for the spapr code to hijack a
field of the base machine type object like that. The boot order
rework simply turned this software boundary violation into an
actual bug.
Have the spapr code to handle that with its own field in
SpaprMachineState. Also kfree() the initial boot device
string when "once" was used.
Fixes: 4b7acd2ac8 ("vl: clean up -boot variables")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1960119
Cc: pbonzini@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210521160735.1901914-1-groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These files included helper-proto.h, but didn't use or declare any
helpers, so the #include has been removed
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-6-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is preferable to store the current rounding mode and retore from that
than recalculating from fpscr, so we changed the behavior of do_fri and
VSX_ROUND to do it like that.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-4-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These functions are used in hw/ppc logic, during machine startup, which
means it must be compiled when --disable-tcg is selected, and so it has
been moved into a common code file
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210521201759.85475-3-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Changed how the function ppc_store_sdr1, from error_report(...) to
qemu_log_mask(LOG_GUEST_ERROR, ...).
Signed-off-by: Bruno Larsen (billionai) <bruno.larsen@eldorado.org.br>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210521201759.85475-2-bruno.larsen@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
-----BEGIN PGP SIGNATURE-----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=gSq/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
# gpg: Signature made Wed 02 Jun 2021 14:44:15 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
docs/secure-coding-practices: Describe how to use 'null-co' block driver
block-copy: refactor copy_range handling
block-copy: fix block_copy_task_entry() progress update
nbd/server: Use drained block ops to quiesce the server
block-backend: add drained_poll
block: improve permission conflict error message
block: simplify bdrv_child_user_desc()
block/vvfat: inherit child_vvfat_qcow from child_of_bds
block: improve bdrv_child_get_parent_desc()
block-backend: improve blk_root_get_parent_desc()
block: document child argument of bdrv_attach_child_common()
block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
block: drop BlockBackendRootState::read_only
block: drop BlockDriverState::read_only
block: consistently use bdrv_is_read_only()
block/vvfat: fix vvfat_child_perm crash
block/vvfat: child_vvfat_qcow: add .get_parent_aio_context, fix crash
qemu-io-cmds: assert that we don't have .perm requested in no-blk case
block/quorum: Provide .bdrv_co_flush instead of .bdrv_co_flush_to_disk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document that security reports must use 'null-co,read-zeroes=on'
because otherwise the memory is left uninitialized (which is an
on-purpose performance feature).
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210601162548.2076631-1-philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we update s->use_copy_range and s->copy_size in
block_copy_do_copy().
It's not very good:
1. block_copy_do_copy() is intended to be a simple function, that wraps
bdrv_co_<io> functions for need of block copy. That's why we don't pass
BlockCopyTask into it. So, block_copy_do_copy() is bad place for
manipulation with generic state of block-copy process
2. We are going to make block-copy thread-safe. So, it's good to move
manipulation with state of block-copy to the places where we'll need
critical sections anyway, to not introduce extra synchronization
primitives in block_copy_do_copy().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210528141628.44287-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't report successful progress on failure, when call_state->ret is
set.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210528141628.44287-2-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before switching between AioContexts we need to make sure that we're
fully quiesced ("nb_requests == 0" for every client) when entering the
drained section.
To do this, we set "quiescing = true" for every client on
".drained_begin" to prevent new coroutines from being created, and
check if "nb_requests == 0" on ".drained_poll". Finally, once we're
exiting the drained section, on ".drained_end" we set "quiescing =
false" and call "nbd_client_receive_next_request()" to resume the
processing of new requests.
With these changes, "blk_aio_attach()" and "blk_aio_detach()" can be
reverted to be as simple as they were before f148ae7d36.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1960137
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210602060552.17433-3-slp@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow block backends to poll their devices/users to check if they have
been quiesced when entering a drained section.
This will be used in the next patch to wait for the NBD server to be
completely quiesced.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20210602060552.17433-2-slp@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now permissions are updated as follows:
1. do graph modifications ignoring permissions
2. do permission update
(of course, we rollback [1] if [2] fails)
So, on stage [2] we can't say which users are "old" and which are
"new" and exist only since [1]. And current error message is a bit
outdated. Let's improve it, to make everything clean.
While being here, add also a comment and some good assertions.
iotests 283, 307, qsd-jobs outputs are updated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210601075218.79249-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All child classes have this callback. So, drop unreachable code.
Still add an assertion to bdrv_attach_child_common(), to early detect
bad classes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210601075218.79249-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recently we've fixed a crash by adding .get_parent_aio_context handler
to child_vvfat_qcow. Now we want it to support .get_parent_desc as
well. child_vvfat_qcow wants to implement own .inherit_options, it's
not bad. But omitting all other handlers is a bad idea. Let's inherit
the class from child_of_bds instead, similar to chain_child_class and
detach_by_driver_cb_class in test-bdrv-drain.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210601075218.79249-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have different types of parents: block nodes, block backends and
jobs. So, it makes sense to specify type together with name.
Next, this handler us used to compose an error message about permission
conflict. And permission conflict occurs in a specific place of block
graph. We shouldn't report name of parent device (as it refers another
place in block graph), but exactly and only the name of the node. So,
use bdrv_get_node_name() directly.
iotest 283 output is updated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210601075218.79249-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have different types of parents: block nodes, block backends and
jobs. So, it makes sense to specify type together with name.
While being here also use g_autofree.
iotest 307 output is updated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20210601075218.79249-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The logic around **child is not obvious: this reference is used not
only to return resulting child, but also to rollback NULL value on
transaction abort.
So, let's add documentation and some assertions.
While being here, drop extra declaration of bdrv_attach_child_noperm().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210601075218.79249-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If fallocate(... FALLOC_FL_ZERO_RANGE ...) returns EINVAL, it's likely
an indication that the file system is buggy and does not implement
unaligned accesses right. We still might be lucky with the other
fallback fallocate() calls later in this function, though, so we should
not return immediately and try the others first.
Since FALLOC_FL_ZERO_RANGE could also return EINVAL if the file descriptor
is not a regular file, we ignore this filesystem bug silently, without
printing an error message for the user.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-3-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A customer reported that running
qemu-img convert -t none -O qcow2 -f qcow2 input.qcow2 output.qcow2
fails for them with the following error message when the images are
stored on a GPFS file system :
qemu-img: error while writing sector 0: Invalid argument
After analyzing the strace output, it seems like the problem is in
handle_aiocb_write_zeroes(): The call to fallocate(FALLOC_FL_PUNCH_HOLE)
returns EINVAL, which can apparently happen if the file system has
a different idea of the granularity of the operation. It's arguably
a bug in GPFS, since the PUNCH_HOLE mode should not result in EINVAL
according to the man-page of fallocate(), but the file system is out
there in production and so we have to deal with it. In commit 294682cc3a
("block: workaround for unaligned byte range in fallocate()") we also
already applied the a work-around for the same problem to the earlier
fallocate(FALLOC_FL_ZERO_RANGE) call, so do it now similar with the
PUNCH_HOLE call. But instead of silently catching and returning
-ENOTSUP (which causes the caller to fall back to writing zeroes),
let's rather inform the user once about the buggy file system and
try the other fallback instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-2-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of keeping additional boolean field, let's store the
information in BDRV_O_RDWR bit of BlockBackendRootState::open_flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This variable is just a cache for !(bs->open_flags & BDRV_O_RDWR),
which we have to synchronize everywhere. Let's just drop it and
consistently use bdrv_is_read_only().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's better to use accessor function instead of bs->read_only directly.
In some places use bdrv_is_writable() instead of
checking both BDRV_O_RDWR set and BDRV_O_INACTIVE not set.
In bdrv_open_common() it's a bit strange to add one more variable, but
we are going to drop bs->read_only in the next patch, so new ro local
variable substitutes it here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
