The handling of the GLUE (General Logic Unit) device is
currently open-coded. Make this into a proper QOM device.
This minor piece of modernisation gets rid of the free
floating qemu_irq array 'pic', which Coverity points out
is technically leaked when we exit the machine init function.
(The replacement glue device is not leaked because it gets
added to the sysbus, so it's accessible via that.)
Fixes: Coverity CID 1421883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201106235109.7066-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The q800 board code connects both of the IRQ outputs of the ESCC
to the same pic[3] qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the PIC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201106235109.7066-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the machine properties instead.
Cc: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity points out that the realize function for the TYPE_MCF5206_MBAR
device leaks the IRQ array it allocates with qemu_allocate_irqs().
Keep a pointer to it in the device state struct to avoid the leak.
(Since it needs to stay around for the life of the simulation there
is no need to actually free it, and the leak was harmless.)
Fixes: Coverity CID 1432412
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120172314.14725-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make the type checking macro name consistent with the TYPE_*
constant.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20200902224311.1321159-40-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The mcf5206 system integration module should be a proper device.
Let's finally QOMify it.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200819065201.4045-1-huth@tuxfamily.org>
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
hw_error() dumps the CPU state and exits QEMU. This is ok during initial
code development (to see where the guest code is currently executing),
but it is certainly not the desired behavior that we want to present to
normal users, and it can also cause trouble when e.g. fuzzing devices.
Thus let's replace these hw_error()s by qemu_log_mask()s instead.
Message-Id: <20200611055807.15921-1-huth@tuxfamily.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526094052.1723-3-f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
All calls to m5206_mbar_read/m5206_mbar_write are used with
'offset = hwaddr & 0x3ff', so we are sure the offset fits
in 16-bit.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526094052.1723-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no good reason for it to be type int, change it to bool.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200207161948.15972-3-philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The MachineClass is already zeroed on creation.
Note: The code setting is_default=0 in hw/i386/pc_piix.c is
different (related to compat options). When adding a
new versioned machine, we want it to be the new default,
so we have to mark the previous one as not default.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200207161948.15972-2-philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This series removes ad hoc RAM allocation API (memory_region_allocate_system_memory)
and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option,
fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways
to allocate RAM.
* reuse hostmem backends of a choice for main RAM without adding extra CLI
options to duplicate hostmem features. A recent case was -mem-shared, to
enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and
provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- (POSTPONED, waiting on libvirt side) "forbid '-numa node,mem' for 5.0 and newer machine types"
- (POSTPONED) "numa: remove deprecated implicit RAM distribution between nodes"
Introduce a new machine.memory-backend property and wrapper code that aliases
global -mem-path and -mem-alloc into automatically created hostmem backend
properties (provided memory-backend was not set explicitly given by user).
A bulk of trivial patches then follow to incrementally convert individual
boards to using machine.memory-backend provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id
so generic code could create default backend if user didn't explicitly provide
memory-backend or -m options
* dropping memory_region_allocate_system_memory() call
* using convenience MachineState::ram MemoryRegion, which points to MemoryRegion
allocated by ram-memdev
On top of that for some boards:
* missing ram_size checks are added (typically it were boards with fixed ram size)
* ram_size fixups are replaced by checks and hard errors, forcing user to
provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted, the old API is removed and memory allocation
routines are cleaned up.
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-50-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-49-imammedo@redhat.com>
Switch to using generic main RAM allocation. To do this set
MachineClass::default_ram_id to m68k_mac.ram and use
MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-48-imammedo@redhat.com>
memory_region_allocate_system_memory() API is going away, so
replace it with memdev allocated MemoryRegion. The later is
initialized by generic code, so board only needs to opt in
to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing
RAM memory region.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200219160953.13771-47-imammedo@redhat.com>
Fixes: 956a78118b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While loading the executable, some platforms (like AVR) need to
detect CPU type that executable is built for - and, with this patch,
this is enabled by reading the field 'e_flags' of the ELF header of
the executable in question. The change expands functionality of
the following functions:
- load_elf()
- load_elf_as()
- load_elf_ram()
- load_elf_ram_sym()
The argument added to these functions is called 'pflags' and is of
type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word'
being the type of the field 'e_flags', in both 32-bit and 64-bit
variants of ELF header). Callers are allowed to pass NULL as that
argument, and in such case no lookup to the field 'e_flags' will
happen, and no information will be returned, of course.
CC: Richard Henderson <rth@twiddle.net>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Edgar E. Iglesias <edgar.iglesias@gmail.com>
CC: Michael Walle <michael@walle.cc>
CC: Thomas Huth <huth@tuxfamily.org>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Philippe Mathieu-Daudé <f4bug@amsat.org>
CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
CC: Aurelien Jarno <aurelien@aurel32.net>
CC: Jia Liu <proljc@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: BALATON Zoltan <balaton@eik.bme.hu>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Thomas Huth <thuth@redhat.com>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
CC: Fabien Chouteau <chouteau@adacore.com>
CC: KONRAD Frederic <frederic.konrad@adacore.com>
CC: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
-----BEGIN PGP SIGNATURE-----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=iYVd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' into staging
Clean-ups: qom-ify serial and remove QDEV_PROP_PTR
Hi,
QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove
me". In most cases, it can be easily replaced with QDEV_PROP_LINK when
the pointer points to an Object.
There are a few places where such substitution isn't possible. For
those places, it seems reasonable to use a specific setter method
instead, and keep the user_creatable = false. In other places,
proper usage of qdev or other facilies is the solution.
The serial code wasn't converted to qdev, which makes it a bit more
archaic to deal with. Let's convert it first, so we can more easily
embed it from other devices, and re-export some properties and drop
QDEV_PROP_PTR usage.
# gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/prop-ptr-pull-request: (37 commits)
qdev/qom: remove some TODO limitations now that PROP_PTR is gone
qdev: remove QDEV_PROP_PTR
qdev: remove PROP_MEMORY_REGION
omap-gpio: remove PROP_PTR
omap-i2c: remove PROP_PTR
omap-intc: remove PROP_PTR
smbus-eeprom: remove PROP_PTR
cris: improve passing PIC interrupt vector to the CPU
mips/cps: fix setting saar property
qdev: use g_strcmp0() instead of open-coding it
leon3: use qdev gpio facilities for the PIL
leon3: use qemu_irq framework instead of callback as property
dp8393x: replace PROP_PTR with PROP_LINK
etraxfs: remove PROP_PTR usage
lance: replace PROP_PTR with PROP_LINK
vmmouse: replace PROP_PTR with PROP_LINK
sm501: make SerialMM a child, export chardev property
mips: use sysbus_mmio_get_region() instead of internal fields
mips: use sysbus_add_io()
mips: baudbase is 115200 by default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Link property is the correct way to pass a MemoryRegion to a device
for DMA purposes.
Sidenote: as a sysbus device, this remains non-usercreatable
even though we can drop the specific flag here.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
On Linux, calling `reboot(RB_AUTOBOOT);` will result in
arch/m68k/mac/misc.c's mac_reset function being called. That in turn
looks at the rombase (or uses 0x40800000 is there's no rombase), adds
0xa, and jumps to that address. At the moment, there's nothing there, so
the kernel just crashes when trying to reboot. So, this commit adds a
very simple implementation at that location, which just writes to via2
to power down. We also correct the value of ROMBASE while we're at it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200102120150.281082-1-Jason@zx2c4.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows to save and restore the content of the PRAM.
It may be useful if we want to check the configuration or to change it.
The backend is added using mtd interface, for instance:
... -drive file=pram.img,format=raw,if=mtd ...
where pram.img is the file where the data will be stored, its size must
be 256 bytes.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191219201439.84804-3-laurent@vivier.eu>
Linux kernel 5.4 will introduce a new memory map for SWIM device.
(aee6bff1c325 ("m68k: mac: Revisit floppy disc controller base addresses"))
Until this release all MMIO are mapped between 0x50f00000 and 0x50f40000,
but it appears that for real hardware 0x50f00000 is not the base address:
the MMIO region spans 0x50000000 through 0x60000000, and 0x50040000 through
0x54000000 is repeated images of 0x50000000 to 0x50040000.
Fixed: 04e7ca8d0f ("hw/m68k: define Macintosh Quadra 800")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191104101513.29518-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If you want to test the machine, it doesn't yet boot a MacROM, but you can
boot a linux kernel from the command line.
You can install your own disk using debian-installer with:
./qemu-system-m68k \
-M q800 \
-serial none -serial mon:stdio \
-m 1000M -drive file=m68k.qcow2,format=qcow2 \
-net nic,model=dp83932,addr=09:00:07:12:34:57 \
-append "console=ttyS0 vga=off" \
-kernel vmlinux-4.15.0-2-m68k \
-initrd initrd.gz \
-drive file=debian-9.0-m68k-NETINST-1.iso \
-drive file=m68k.qcow2,format=qcow2 \
-nographic
If you use a graphic adapter instead of "-nographic", you can use "-g"
to set the size of the display (I use "-g 1600x800x24").
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20191026164546.30020-11-laurent@vivier.eu>
SWIM (Sander-Wozniak Integrated Machine) is the floppy controller of
the 680x0 Macintosh.
This patch introduces only the basic support: it allows to switch from
IWM (Integrated WOZ Machine) mode to the SWIM mode and makes the linux
driver happy.
It cannot read any floppy image.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-10-laurent@vivier.eu>
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
This patch adds basic support for the NuBus bus. This is used by 680x0
Macintosh.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-8-laurent@vivier.eu>
Inside the 680x0 Macintosh, VIA (Versatile Interface Adapter) is used
to interface the keyboard, Mouse, and real-time clock. It also provides
control line for the floppy disk driver, video interface, sound circuitry
and serial interface.
This implementation is based on the MOS6522 object.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <20191026164546.30020-6-laurent@vivier.eu>
Switch the mcf5206 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191021140600.10725-1-peter.maydell@linaro.org
Switch the mcf5208 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Huth <huth@tuxfamily.org>
Message-id: 20191017132905.5604-9-peter.maydell@linaro.org
Currently the ptimer design uses a QEMU bottom-half as its
mechanism for calling back into the device model using the
ptimer when the timer has expired. Unfortunately this design
is fatally flawed, because it means that there is a lag
between the ptimer updating its own state and the device
callback function updating device state, and guest accesses
to device registers between the two can return inconsistent
device state.
We want to replace the bottom-half design with one where
the guest device's callback is called either immediately
(when the ptimer triggers by timeout) or when the device
model code closes a transaction-begin/end section (when the
ptimer triggers because the device model changed the
ptimer's count value or other state). As the first step,
rename ptimer_init() to ptimer_init_with_bh(), to free up
the ptimer_init() name for the new API. We can then convert
all the ptimer users away from ptimer_init_with_bh() before
removing it entirely.
(Commit created with
git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/'
and three overlong lines folded by hand.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
The array returned by qemu_allocate_irqs is malloced, free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Coverity currently complains that the "if (0x00 & (0x80 >> (phase - 8))"
in next-cube.c can never be true. Right it is. The "0x00" is meant as value
of the control register of the RTC, which is currently not implemented yet.
Thus, let's add a register variable for this now. However, the RTC
registers are currently defined as static variables in nextscr2_write(),
which is quite ugly. Thus let's also move the RTC variables to the main
machine state instead. In the long run, we should likely even refactor
the whole RTC code into a separate device in a separate file, but that's
something for calm winter nights later... as a first step, cleaning up
the static variables and shutting up the warning from Coverity should
be sufficient.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190921091738.26953-1-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXTcube uses a normal 8530 serial controller, so we can simply use
our normal "escc" device here.
While we're at it, also add a boot-serial-test for the next-cube machine,
now that the serial output works.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-6-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is still quite incomplete (no SCSI, no floppy emulation, no network,
etc.), but the firmware already shows up the debug monitor prompt in the
framebuffer display, so at least the very basics are already working.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-cube.c
and altered quite a bit to fit the latest interface and coding conventions
of the current QEMU.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-4-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
It is likely still quite incomplete (e.g. mouse and interrupts are not
implemented yet), but it is good enough for keyboard input at the firmware
monitor.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-kbd.c
and altered to fit the latest interface of the current QEMU (e.g. to use
memory_region_init_io() instead of cpu_register_physical_memory()).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-3-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
