The current implementation will disable the guest Intel PT feature
if the Intel PT LIP feature is supported on the host, but the LIP
feature is comming soon(e.g. SnowRidge and later).
This patch will make the guest LIP feature configurable and Intel
PT feature can be enabled in guest when the guest LIP status same
with the host.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <20201202101042.11967-1-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds support the kernel-irqchip option for
WHPX with on or off value. 'split' value is not supported
for the option. The option only works for the latest version
of Windows (ones that are coming out on Insiders). The
change maintains backward compatibility on older version of
Windows where this option is not supported.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880B13258DA9251F8459F4DC0170@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IOAPIC has an 'Extended Destination ID' field in its RTE, which maps
to bits 11-4 of the MSI address. Since those address bits fall within a
given 4KiB page they were historically non-trivial to use on real hardware.
The Intel IOMMU uses the lowest bit to indicate a remappable format MSI,
and then the remaining 7 bits are part of the index.
Where the remappable format bit isn't set, we can actually use the other
seven to allow external (IOAPIC and MSI) interrupts to reach up to 32768
CPUs instead of just the 255 permitted on bare metal.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <78097f9218300e63e751e077a0a5ca029b56ba46.camel@infradead.org>
[Fix UBSAN warning. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122801.19514-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Icelake-Client CPU models will be removed in the future.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-2-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword deprecation note, fix version in doc]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Implement the ability of marking some versions deprecated. When
that CPU model is chosen, print a warning. The warning message
can be customized, e.g. suggesting an alternative CPU model to be
used instead.
The deprecation message will be printed by x86_cpu_list_entry(),
e.g. '-cpu help'.
QMP command 'query-cpu-definitions' will return a bool value
indicating the deprecation status.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword commit message]
[ehabkost: Handle NULL cpu_type]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With x2apic enabled, configurations can have more that 255 cores.
Noticed the device add test is hitting an assert when during cpu
hotplug with core_id > 255. This is due to assert check in the
CPUID 0x8000001E.
Remove the assert check and fix the problem.
Fixes the bug:
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1834200
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <160072824160.9666.8890355282135970684.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We only use x86_cpu_get_supported_feature_word() after its implementation,
no forward declaration needed.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200904145431.196885-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200921221045.699690-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Missed in commit 41fba1618b "docs/system: convert the documentation of
deprecated features to rST."
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200929075824.1517969-3-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Per Intel SDM vol 1, 13.2, if CPUID.1:ECX.XSAVE[bit 26] is 0, the
processor provides no further enumeration through CPUID function 0DH.
QEMU does not do this for "-cpu host,-xsave".
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200716082019.215316-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux-5.8 introduced interrupt based mechanism for 'page ready' events
delivery and disabled the old, #PF based one (see commit 2635b5c4a0e4
"KVM: x86: interrupt based APF 'page ready' event delivery"). Linux
guest switches to using in in 5.9 (see commit b1d405751cd5 "KVM: x86:
Switch KVM guest to using interrupts for page ready APF delivery").
The feature has a new KVM_FEATURE_ASYNC_PF_INT bit assigned and
the interrupt vector is set in MSR_KVM_ASYNC_PF_INT MSR. Support this
in QEMU.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908141206.357450-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.
Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.
As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.
Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
apic_id contains all the information required to build
CPUID_8000_001E. core_id and node_id is already part of
apic_id generated by x86_topo_ids_from_apicid.
Also remove the restriction on number bits on core_id and
node_id.
Remove all the hardcoded values and replace with generalized
fields.
Refer the Processor Programming Reference (PPR) documentation
available from the bugzilla Link below.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Message-Id: <159897585257.30750.5815593918927986935.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove all the hardcoded values and replace with generalized
fields.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <159897584649.30750.3939159632943292252.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Hyper-V TLFS prior to version 6.0 had a mistake in it: special value
'0xffffffff' for CPUID 0x40000004.EBX was called 'never to retry', this
looked weird (like why it's not '0' which supposedly have the same effect?)
but nobody raised the question. In TLFS version 6.0 the mistake was
corrected to 'never notify' which sounds logical. Fix QEMU accordingly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200515114847.74523-1-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit c24a41bb53.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889937478.21294.4192291354416942986.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit dd08ef0318.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889936257.21294.1786224705357428082.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 0c1538cb1a.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889935015.21294.1425332462852607813.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 247b18c593.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933756.21294.13999336052652073520.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reverts commit 7b225762c8.
Remove the EPYC specific apicid decoding and use the generic
default decoding.
Also fix all the references of pkg_offset.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <159889933119.21294.8112825730577505757.stgit@naples-babu.amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add the missing vmx features in Skylake-Server and Cascadelake-Server
CPU models based on the output of Paolo's script.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-4-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add the missing features(sha_ni, avx512ifma, rdpid, fsrm,
vmx-rdseed-exit, vmx-pml, vmx-eptp-switching) and change the model
number to 106 in the Icelake-Server-v4 CPU model.
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-3-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
For CPUs support fast short REP MOV[CPUID.(EAX=7,ECX=0):EDX(bit4)], e.g
Icelake and Tigerlake, expose it to the guest VM.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20200714084148.26690-2-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Features unavailable due to absent of their dependent features should
not be added to env->user_features. env->user_features only contains the
feature explicity specified with -feature/+feature by user.
Fixes: 99e24dbdaa ("target/i386: introduce generic feature dependency mechanism")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200713174436.41070-3-xiaoyao.li@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Features defined in versioned CPU model are recorded in env->user_features
since they are updated as property. It's unwated because they are not
user specified.
Simply clear env->user_features as a fix. It won't clear user specified
features because user specified features are filled to
env->user_features later in x86_cpu_expand_features().
Cc: Chenyi Qiang <chenyi.qiang@intel.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200713174436.41070-2-xiaoyao.li@intel.com>
[ehabkost: fix coding style]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This instruction aims to give a way to choose which memory accesses
do not need to be tracked in the TSX read set, which is defined as
CPUID.(EAX=7,ECX=0):EDX[bit 16].
The release spec link is as follows:
https://software.intel.com/content/dam/develop/public/us/en/documents/\
architecture-instruction-set-extensions-programming-reference.pdf
The associated kvm patch link is as follows:
https://lore.kernel.org/patchwork/patch/1268026/
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <1593991036-12183-3-git-send-email-cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The availability of the SERIALIZATION instruction is indicated
by the presence of the CPUID feature flag SERIALIZE, which is
defined as CPUID.(EAX=7,ECX=0):ECX[bit 14].
The release spec link is as follows:
https://software.intel.com/content/dam/develop/public/us/en/documents/\
architecture-instruction-set-extensions-programming-reference.pdf
The associated kvm patch link is as follows:
https://lore.kernel.org/patchwork/patch/1268025/
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <1593991036-12183-2-git-send-email-cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID level need to be set to 0x14 manually on old
machine-type if Intel PT is enabled in guest. E.g. the
CPUID[0].EAX(level)=7 and CPUID[7].EBX[25](intel-pt)=1 when the
Qemu with "-machine pc-i440fx-3.1 -cpu qemu64,+intel-pt" parameter.
This patch corrects the warning message of the previous
submission(ddc2fc9).
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1593499113-4768-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU is overriding KVM_GET_SUPPORTED_CPUID's answer for
the WAITPKG bit depending on the "-overcommit cpu-pm" setting. This is a
bad idea because it does not even check if the host supports it, but it
can be done in x86_cpu_realizefn just like we do for the MONITOR bit.
This patch moves it there, while making it conditional on host
support for the related UMWAIT MSR.
Cc: qemu-stable@nongnu.org
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hvf_reset_vcpu() duplicates actions performed by x86_cpu_reset(). The
difference is that hvf_reset_vcpu() stores initial values directly to
VMCS while x86_cpu_reset() stores it in CPUX86State and then
cpu_synchronize_all_post_init() or cpu_synchronize_all_post_reset()
flushes CPUX86State into VMCS. That makes hvf_reset_vcpu() a kind of
no-op.
Here's the trace of CPU state modifications during VM start:
hvf_reset_vcpu (resets VMCS)
cpu_synchronize_all_post_init (overwrites VMCS fields written by
hvf_reset_vcpu())
cpu_synchronize_all_states
hvf_reset_vcpu (resets VMCS)
cpu_synchronize_all_post_reset (overwrites VMCS fields written by
hvf_reset_vcpu())
General purpose registers, system registers, segment descriptors, flags
and IP are set by hvf_put_segments() in post-init and post-reset,
therefore it's safe to remove them from hvf_reset_vcpu().
PDPTE initialization can be dropped because Intel SDM (26.3.1.6 Checks
on Guest Page-Directory-Pointer-Table Entries) doesn't require PDPTE to
be clear unless PAE is used: "A VM entry to a guest that does not use
PAE paging does not check the validity of any PDPTEs."
And if PAE is used, PDPTE's are initialized from CR3 in macvm_set_cr0().
Cc: Cameron Esfahani <dirty@apple.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200630102824.77604-8-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for nested guest live migration is part of Linux 5.8, add the
corresponding code to QEMU. The migration format consists of a few
flags, is an opaque 4k blob.
The blob is in VMCB format (the control area represents the L1 VMCB
control fields, the save area represents the pre-vmentry state; KVM does
not use the host save area since the AMD manual allows that) but QEMU
does not really care about that. However, the flags need to be
copied to hflags/hflags2 and back.
In addition, support for retrieving and setting the AMD nested virtualization
states allows the L1 guest to be reset while running a nested guest, but
a small bug in CPU reset needs to be fixed for that to work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
QEMU incorrectly validates FEAT_SVM feature flags against
GET_SUPPORTED_CPUID even if SVM features are being masked out by
cpu_x86_cpuid(). This can make QEMU print warnings on most AMD
CPU models, even when SVM nesting is disabled (which is the
default).
This bug was never detected before because of a Linux KVM bug:
until Linux v5.6, KVM was not filtering out SVM features in
GET_SUPPORTED_CPUID when nested was disabled. This KVM bug was
fixed in Linux v5.7-rc1, on Linux commit a50718cc3f43 ("KVM:
nSVM: Expose SVM features to L1 iff nested is enabled").
Fix the problem by adding a CPUID_EXT3_SVM dependency to all
FEAT_SVM feature flags in the feature_dependencies table.
Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200623230116.277409-1-ehabkost@redhat.com>
[Fix testcase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add which features are added or removed in this version.
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200324051034.30541-1-tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
The Perfmon and Debug Capability MSR named IA32_PERF_CAPABILITIES is
a feature-enumerating MSR, which only enumerates the feature full-width
write (via bit 13) by now which indicates the processor supports IA32_A_PMCx
interface for updating bits 32 and above of IA32_PMCx.
The existence of MSR IA32_PERF_CAPABILITIES is enumerated by CPUID.1:ECX[15].
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20200529074347.124619-5-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AVX512_VP2INTERSECT compute vector pair intersection to a pair
of mask registers, which is introduced with intel Tiger Lake,
defining as CPUID.(EAX=7,ECX=0):EDX[bit 08].
Refer to the following release spec:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Message-Id: <1586760758-13638-1-git-send-email-cathy.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf CPUID_Fn80000008_ECX provides information about the
number of threads supported by the processor. It was found that
the field ApicIdSize(bits 15-12) was not set correctly.
ApicIdSize is defined as the number of bits required to represent
all the ApicId values within a package.
Valid Values: Value Description
3h-0h Reserved.
4h up to 16 threads.
5h up to 32 threads.
6h up to 64 threads.
7h up to 128 threads.
Fh-8h Reserved.
Fix the bit appropriately.
This came up during following thread.
https://lore.kernel.org/qemu-devel/158643709116.17430.15995069125716778943.malonedeb@wampee.canonical.com/#t
Refer the Processor Programming Reference (PPR) for AMD Family 17h
Model 01h, Revision B1 Processors. The documentation is available
from the bugzilla Link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reported-by: Philipp Eppelt <1871842@bugs.launchpad.net>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <20200417215345.64800.73351.stgit@localhost.localdomain>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IEC binary prefixes ease code review: the unit is explicit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200601142930.29408-9-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
