This array is no longer used.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This method uses one uint32_t * 256 table instead of 4,
which means its data cache overhead is less.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These arrays are no longer used, replaced by AES_SH_*, AES_ISH_*.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DSM instruction. This was the last use
of aes64_operation and its support macros, so remove them all.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ESM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64IM instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64DS instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AES64ES instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction. We have converted everything
to crypto/aes-round.h; crypto/aes.h is no longer needed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESD instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESE instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split these helpers so that we are not passing 'decrypt'
within the simd descriptor.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDEC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESIMC instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESDECLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the AESENCLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHER instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VNCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This implements the VCIPHERLAST instruction.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Detect CRYPTO in cpuinfo; implement the accel hooks.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a primitive for InvSubBytes + InvShiftRows +
AddRoundKey + InvMixColumns.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a primitive for InvSubBytes + InvShiftRows +
InvMixColumns + AddRoundKey.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a primitive for SubBytes + ShiftRows + MixColumns + AddRoundKey.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a primitive for InvSubBytes + InvShiftRows + AddRoundKey.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Start adding infrastructure for accelerating guest AES.
Begin with a SubBytes + ShiftRows + AddRoundKey primitive.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These macros will constant fold and avoid the indirection through
memory when fully unrolling some new primitives.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not currently have a table in crypto/ for just MixColumns.
Move both tables for consistency.
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a shared driver and backends for i386, aarch64, ppc64, riscv64.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the code from tcg/. Fix a bug in that PPC_FEATURE2_ARCH_3_10
is actually spelled PPC_FEATURE2_ARCH_3_1.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
=8lDs
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-07-07:
In this last queue for 8.1 we have a lot of fixes and improvements all
around: SMT support for powerNV, XIVE fixes, PPC440 cleanups, exception
handling cleanups and kvm_pph.h cleanups just to name a few.
Thanks everyone in the qemu-ppc community for all the contributions for
the next QEMU 8.1 release.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZKgihBYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFksr0A/jrvSDSDxB5mR7bo0dNGndLXcdTo
# ZGr6k6pcMpr7RDOAAQDVeaw7f8djQ4Aaelk6v1wPs5bYfNY2ElF4NsqHJFX2Cg==
# =8lDs
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 03:34:44 PM BST
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20230707-1' of https://gitlab.com/danielhb/qemu: (59 commits)
ppc/pnv: Add QME region for P10
target/ppc: Remove pointless checks of CONFIG_USER_ONLY in 'kvm_ppc.h'
target/ppc: Restrict 'kvm_ppc.h' to sysemu in cpu_init.c
target/ppc: Define TYPE_HOST_POWERPC_CPU in cpu-qom.h
target/ppc: Move CPU QOM definitions to cpu-qom.h
target/ppc: Reorder #ifdef'ry in kvm_ppc.h
target/ppc: Have 'kvm_ppc.h' include 'sysemu/kvm.h'
target/ppc: Machine check on invalid real address access on POWER9/10
tests/qtest: Add xscom tests for powernv10 machine
ppc/pnv: Set P10 core xscom region size to match hardware
ppc/pnv: Log all unimp warnings with similar message
ppc440_pcix: Rename QOM type define abd move it to common header
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc4xx_pci: Rename QOM type name define
ppc440_pcix: Stop using system io region for PCI bus
ppc440_pcix: Don't use iomem for regs
ppc/sam460ex: Remove address_space_mem local variable
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc440: Add busnum property to PCIe controller model
ppc440: Stop using system io region for PCIe buses
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSn7uYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPi1gf+MJNyMneyyEZgBwlwgs2NYjz+cKwW
KxtCOHDfew5S1qpq+gyvUnq5K0JJBGZKoFMwS6JwOpHASGx1o6mlF06CgLAk7wKh
yCf1kzvRA4y3tYbSwvxD5iKV3YSsayIHuJ8q2GslVXBtAZ0xC2cREQLzKLNuEV6M
rO4bj6QUV2fRc9u9TlurXijsdalUAEjmkIeZhtghhkD+lJo44yzcF7qAROaE3pFa
IYEp8pTgcbJeiI0BUNFTRk0OlE5f7MT3GIQwTC34WWPO+r/uBXL5FXNqN38svugh
7hjOliIMU4I6jpL1t7v2+9Vs38gAEPchJ0Nly4TV+dydh7l1pIn9G7ssoA==
=OBRZ
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Granite Rapids CPU model
* Miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSn7uYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPi1gf+MJNyMneyyEZgBwlwgs2NYjz+cKwW
# KxtCOHDfew5S1qpq+gyvUnq5K0JJBGZKoFMwS6JwOpHASGx1o6mlF06CgLAk7wKh
# yCf1kzvRA4y3tYbSwvxD5iKV3YSsayIHuJ8q2GslVXBtAZ0xC2cREQLzKLNuEV6M
# rO4bj6QUV2fRc9u9TlurXijsdalUAEjmkIeZhtghhkD+lJo44yzcF7qAROaE3pFa
# IYEp8pTgcbJeiI0BUNFTRk0OlE5f7MT3GIQwTC34WWPO+r/uBXL5FXNqN38svugh
# 7hjOliIMU4I6jpL1t7v2+9Vs38gAEPchJ0Nly4TV+dydh7l1pIn9G7ssoA==
# =OBRZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 11:54:30 AM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386: Add new CPU model GraniteRapids
target/i386: Add few security fix bits in ARCH_CAPABILITIES into SapphireRapids CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Allow MCDT_NO if host supports
target/i386: Add support for MCDT_NO in CPUID enumeration
target/i386: Adjust feature level according to FEAT_7_1_EDX
qemu_cleanup: begin drained section after vm_shutdown()
meson.build: Remove the logic to link C code with the C++ linker
python: bump minimum requirements so they are compatible with 3.12
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The GraniteRapids CPU model mainly adds the following new features
based on SapphireRapids:
- PREFETCHITI CPUID.(EAX=7,ECX=1):EDX[bit 14]
- AMX-FP16 CPUID.(EAX=7,ECX=1):EAX[bit 21]
And adds the following security fix for corresponding vulnerabilities:
- MCDT_NO CPUID.(EAX=7,ECX=2):EDX[bit 5]
- SBDR_SSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 13]
- FBSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 14]
- PSDP_NO MSR_IA32_ARCH_CAPABILITIES[bit 15]
- PBRSB_NO MSR_IA32_ARCH_CAPABILITIES[bit 24]
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-7-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SapphireRapids has bit 13, 14 and 15 of MSR_IA32_ARCH_CAPABILITIES
enabled, which are related to some security fixes.
Add version 2 of SapphireRapids CPU model with those bits enabled also.
Signed-off-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20230706054949.66556-6-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, bit 13, 14, 15 and 24 of MSR_IA32_ARCH_CAPABILITIES are
disclosed for fixing security issues, so add those bit definitions.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-ID: <20230706054949.66556-5-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MCDT_NO bit indicates HW contains the security fix and doesn't need to
be mitigated to avoid data-dependent behaviour for certain instructions.
It needs no hypervisor support. Treat it as supported regardless of what
KVM reports.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-4-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID.(EAX=7,ECX=2):EDX[bit 5] enumerates MCDT_NO. Processors enumerate
this bit as 1 do not exhibit MXCSR Configuration Dependent Timing (MCDT)
behavior and do not need to be mitigated to avoid data-dependent behavior
for certain instructions.
Since MCDT_NO is in a new sub-leaf, add a new CPUID feature word
FEAT_7_2_EDX. Also update cpuid_level_func7 by FEAT_7_2_EDX.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-3-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If FEAT_7_1_EAX is 0 and FEAT_7_1_EDX is non-zero, as is the case
with a Granite Rapids host and
'-cpu host,-avx-vnni,-avx512-bf16,-fzrm,-fsrs,-fsrc,-amx-fp16', we can't
get CPUID_7_1 leaf even though CPUID_7_1_EDX has non-zero value.
Update cpuid_level_func7 according to CPUID_7_1_EDX, otherwise
guest may report wrong maximum number sub-leaves in leaf 07H.
Fixes: eaaa197d5b ("target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration")
Cc: qemu-stable@nongnu.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20230706054949.66556-2-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
in order to avoid requests being stuck in a BlockBackend's request
queue during cleanup. Having such requests can lead to a deadlock [0]
with a virtio-scsi-pci device using iothread that's busy with IO when
initiating a shutdown with QMP 'quit'.
There is a race where such a queued request can continue sometime
(maybe after bdrv_child_free()?) during bdrv_root_unref_child() [1].
The completion will hold the AioContext lock and wait for the BQL
during SCSI completion, but the main thread will hold the BQL and
wait for the AioContext as part of bdrv_root_unref_child(), leading to
the deadlock [0].
[0]:
> Thread 3 (Thread 0x7f3bbd87b700 (LWP 135952) "qemu-system-x86"):
> #0 __lll_lock_wait (futex=futex@entry=0x564183365f00 <qemu_global_mutex>, private=0) at lowlevellock.c:52
> #1 0x00007f3bc1c0d843 in __GI___pthread_mutex_lock (mutex=0x564183365f00 <qemu_global_mutex>) at ../nptl/pthread_mutex_lock.c:80
> #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x564183365f00 <qemu_global_mutex>, file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../util/qemu-thread-posix.c:94
> #3 0x000056418247cc2a in qemu_mutex_lock_iothread_impl (file=0x564182b7f774 "../softmmu/physmem.c", line=2593) at ../softmmu/cpus.c:504
> #4 0x00005641826d5325 in prepare_mmio_access (mr=0x5641856148a0) at ../softmmu/physmem.c:2593
> #5 0x00005641826d6fe7 in address_space_stl_internal (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0, endian=DEVICE_LITTLE_ENDIAN) at /home/febner/repos/qemu/memory_ldst.c.inc:318
> #6 0x00005641826d7154 in address_space_stl_le (as=0x56418679b310, addr=4276113408, val=16418, attrs=..., result=0x0) at /home/febner/repos/qemu/memory_ldst.c.inc:357
> #7 0x0000564182374b07 in pci_msi_trigger (dev=0x56418679b0d0, msg=...) at ../hw/pci/pci.c:359
> #8 0x000056418237118b in msi_send_message (dev=0x56418679b0d0, msg=...) at ../hw/pci/msi.c:379
> #9 0x0000564182372c10 in msix_notify (dev=0x56418679b0d0, vector=8) at ../hw/pci/msix.c:542
> #10 0x000056418243719c in virtio_pci_notify (d=0x56418679b0d0, vector=8) at ../hw/virtio/virtio-pci.c:77
> #11 0x00005641826933b0 in virtio_notify_vector (vdev=0x5641867a34a0, vector=8) at ../hw/virtio/virtio.c:1985
> #12 0x00005641826948d6 in virtio_irq (vq=0x5641867ac078) at ../hw/virtio/virtio.c:2461
> #13 0x0000564182694978 in virtio_notify (vdev=0x5641867a34a0, vq=0x5641867ac078) at ../hw/virtio/virtio.c:2473
> #14 0x0000564182665b83 in virtio_scsi_complete_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:115
> #15 0x00005641826670ce in virtio_scsi_complete_cmd_req (req=0x7f3bb000e5d0) at ../hw/scsi/virtio-scsi.c:641
> #16 0x000056418266736b in virtio_scsi_command_complete (r=0x7f3bb0010560, resid=0) at ../hw/scsi/virtio-scsi.c:712
> #17 0x000056418239aac6 in scsi_req_complete (req=0x7f3bb0010560, status=2) at ../hw/scsi/scsi-bus.c:1526
> #18 0x000056418239e090 in scsi_handle_rw_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:242
> #19 0x000056418239e13f in scsi_disk_req_check_error (r=0x7f3bb0010560, ret=-123, acct_failed=false) at ../hw/scsi/scsi-disk.c:265
> #20 0x000056418239e482 in scsi_dma_complete_noio (r=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:340
> #21 0x000056418239e5d9 in scsi_dma_complete (opaque=0x7f3bb0010560, ret=-123) at ../hw/scsi/scsi-disk.c:371
> #22 0x00005641824809ad in dma_complete (dbs=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:107
> #23 0x0000564182480a72 in dma_blk_cb (opaque=0x7f3bb000d9d0, ret=-123) at ../softmmu/dma-helpers.c:127
> #24 0x00005641827bf78a in blk_aio_complete (acb=0x7f3bb00021a0) at ../block/block-backend.c:1563
> #25 0x00005641827bfa5e in blk_aio_write_entry (opaque=0x7f3bb00021a0) at ../block/block-backend.c:1630
> #26 0x000056418295638a in coroutine_trampoline (i0=-1342102448, i1=32571) at ../util/coroutine-ucontext.c:177
> #27 0x00007f3bc0caed40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
> #28 0x00007f3bbd8757f0 in ?? ()
> #29 0x0000000000000000 in ?? ()
>
> Thread 1 (Thread 0x7f3bbe3e9280 (LWP 135944) "qemu-system-x86"):
> #0 __lll_lock_wait (futex=futex@entry=0x5641856f2a00, private=0) at lowlevellock.c:52
> #1 0x00007f3bc1c0d8d1 in __GI___pthread_mutex_lock (mutex=0x5641856f2a00) at ../nptl/pthread_mutex_lock.c:115
> #2 0x0000564182939f2e in qemu_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:94
> #3 0x000056418293a140 in qemu_rec_mutex_lock_impl (mutex=0x5641856f2a00, file=0x564182c0e319 "../util/async.c", line=728) at ../util/qemu-thread-posix.c:149
> #4 0x00005641829532d5 in aio_context_acquire (ctx=0x5641856f29a0) at ../util/async.c:728
> #5 0x000056418279d5df in bdrv_set_aio_context_commit (opaque=0x5641856e6e50) at ../block.c:7493
> #6 0x000056418294e288 in tran_commit (tran=0x56418630bfe0) at ../util/transactions.c:87
> #7 0x000056418279d880 in bdrv_try_change_aio_context (bs=0x5641856f7130, ctx=0x56418548f810, ignore_child=0x0, errp=0x0) at ../block.c:7626
> #8 0x0000564182793f39 in bdrv_root_unref_child (child=0x5641856f47d0) at ../block.c:3242
> #9 0x00005641827be137 in blk_remove_bs (blk=0x564185709880) at ../block/block-backend.c:914
> #10 0x00005641827bd689 in blk_remove_all_bs () at ../block/block-backend.c:583
> #11 0x0000564182798699 in bdrv_close_all () at ../block.c:5117
> #12 0x000056418248a5b2 in qemu_cleanup () at ../softmmu/runstate.c:821
> #13 0x0000564182738603 in qemu_default_main () at ../softmmu/main.c:38
> #14 0x0000564182738631 in main (argc=30, argv=0x7ffd675a8a48) at ../softmmu/main.c:48
>
> (gdb) p *((QemuMutex*)0x5641856f2a00)
> $1 = {lock = {__data = {__lock = 2, __count = 2, __owner = 135952, ...
> (gdb) p *((QemuMutex*)0x564183365f00)
> $2 = {lock = {__data = {__lock = 2, __count = 0, __owner = 135944, ...
[1]:
> Thread 1 "qemu-system-x86" hit Breakpoint 5, bdrv_drain_all_end () at ../block/io.c:551
> #0 bdrv_drain_all_end () at ../block/io.c:551
> #1 0x00005569810f0376 in bdrv_graph_wrlock (bs=0x0) at ../block/graph-lock.c:156
> #2 0x00005569810bd3e0 in bdrv_replace_child_noperm (child=0x556982e2d7d0, new_bs=0x0) at ../block.c:2897
> #3 0x00005569810bdef2 in bdrv_root_unref_child (child=0x556982e2d7d0) at ../block.c:3227
> #4 0x00005569810e8137 in blk_remove_bs (blk=0x556982e42880) at ../block/block-backend.c:914
> #5 0x00005569810e7689 in blk_remove_all_bs () at ../block/block-backend.c:583
> #6 0x00005569810c2699 in bdrv_close_all () at ../block.c:5117
> #7 0x0000556980db45b2 in qemu_cleanup () at ../softmmu/runstate.c:821
> #8 0x0000556981062603 in qemu_default_main () at ../softmmu/main.c:38
> #9 0x0000556981062631 in main (argc=30, argv=0x7ffd7a82a418) at ../softmmu/main.c:48
> [Switching to Thread 0x7fe76dab2700 (LWP 103649)]
>
> Thread 3 "qemu-system-x86" hit Breakpoint 4, blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505
> #0 blk_inc_in_flight (blk=0x556982e42880) at ../block/block-backend.c:1505
> #1 0x00005569810e8f36 in blk_wait_while_drained (blk=0x556982e42880) at ../block/block-backend.c:1312
> #2 0x00005569810e9231 in blk_co_do_pwritev_part (blk=0x556982e42880, offset=3422961664, bytes=4096, qiov=0x556983028060, qiov_offset=0, flags=0) at ../block/block-backend.c:1402
> #3 0x00005569810e9a4b in blk_aio_write_entry (opaque=0x556982e2cfa0) at ../block/block-backend.c:1628
> #4 0x000055698128038a in coroutine_trampoline (i0=-2090057872, i1=21865) at ../util/coroutine-ucontext.c:177
> #5 0x00007fe770f50d40 in ?? () from /lib/x86_64-linux-gnu/libc.so.6
> #6 0x00007ffd7a829570 in ?? ()
> #7 0x0000000000000000 in ?? ()
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20230706131418.423713-1-f.ebner@proxmox.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are not mixing C++ with C code anymore, the only remaining
C++ code in qga/vss-win32/ is used for a plain C++ executable.
Thus we can remove the hacks for linking C code with the C++ linker
now to simplify meson.build a little bit, and also to avoid that
some C++ code sneaks in by accident again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230706064736.178962-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are many Python 3.12 issues right now, but a particularly
problematic one when debugging them is that one cannot even use
minreqs.txt in a Python 3.12 virtual environment to test with
locked package versions.
Bump the mypy and wrapt versions to fix this, while remaining
within the realm of versions compatible with Python 3.7.
This requires a workaround for a mypy false positive
qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap]
where mypy does not realize that self.disconnect() could change
the value of self.runstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Quad Management Engine (QME) manages power related settings for its
quad. The xscom region is separate from the quad xscoms, therefore a new
region is added. The xscoms in a QME select a given core by selecting
the forth nibble.
Implement dummy reads for the stop state history (SSH) and special
wakeup (SPWU) registers. This quietens some sxcom errors when skiboot
boots on p10.
Power9 does not have a QME.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-ID: <20230707071213.9924-1-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Version: GnuPG v1
iQEcBAABAgAGBQJkp86uAAoJEO8Ells5jWIRX00H/1T20eOfMZ+8ZyO32P1DBl5U
ZQNl5/rcg5cqjatragwagAHGYzmoegJlY3/JbWju09SPtsgbMT/nQI6EFDfpTHb6
9HB2h+43eHq+OBpmPPsmqVRzjuNi9lUmJ20We4aqJe/VM4/DHMtKW3EXGmORb7cF
wjazN5FVn+YQHgA+pckQ79k6h/lJhtLv+MuainS12o8yyCO8OyqP6Bm4lYPbBNpb
Im3HXiv05gFuS2P4lD8ZvjcdWalHDzDZW4RzKHlpcic0GBN/rcU3FDqGeOIP8qWL
oxokpjd2QmW1rX/TwaweiObEjo/3n7ymRu5PofE3T7e+gnAVfAyqDxrgAU6fMjA=
=CGHw
-----END PGP SIGNATURE-----
Merge tag 'net-pull-request' of https://github.com/jasowang/qemu into staging
# -----BEGIN PGP SIGNATURE-----
# Version: GnuPG v1
#
# iQEcBAABAgAGBQJkp86uAAoJEO8Ells5jWIRX00H/1T20eOfMZ+8ZyO32P1DBl5U
# ZQNl5/rcg5cqjatragwagAHGYzmoegJlY3/JbWju09SPtsgbMT/nQI6EFDfpTHb6
# 9HB2h+43eHq+OBpmPPsmqVRzjuNi9lUmJ20We4aqJe/VM4/DHMtKW3EXGmORb7cF
# wjazN5FVn+YQHgA+pckQ79k6h/lJhtLv+MuainS12o8yyCO8OyqP6Bm4lYPbBNpb
# Im3HXiv05gFuS2P4lD8ZvjcdWalHDzDZW4RzKHlpcic0GBN/rcU3FDqGeOIP8qWL
# oxokpjd2QmW1rX/TwaweiObEjo/3n7ymRu5PofE3T7e+gnAVfAyqDxrgAU6fMjA=
# =CGHw
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 07 Jul 2023 09:37:02 AM BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
igb: Remove obsolete workaround for Windows
e1000e: Add ICR clearing by corresponding IMS bit
net: socket: remove net_init_socket()
net: socket: move fd type checking to its own function
net: socket: prepare to cleanup net_init_socket()
hw/net: ftgmac100: Drop the small packet check in the receive path
hw/net: sunhme: Remove the logic of padding short frames in the receive path
hw/net: sungem: Remove the logic of padding short frames in the receive path
hw/net: rtl8139: Remove the logic of padding short frames in the receive path
hw/net: pcnet: Remove the logic of padding short frames in the receive path
hw/net: ne2000: Remove the logic of padding short frames in the receive path
hw/net: i82596: Remove the logic of padding short frames in the receive path
hw/net: vmxnet3: Remove the logic of padding short frames in the receive path
hw/net: e1000: Remove the logic of padding short frames in the receive path
virtio-net: correctly report maximum tx_queue_size value
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
I confirmed it works with Windows even without this workaround. It is
likely to be a mistake so remove it.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
