The correct name is Wacom.
Fix the typo which is present since 378af96155.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190213123446.1768-1-philmd@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
valgrind on the test-char.c code reports that 'struct termios' contains
uninitialized memory.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-17-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When the 'reconnect' option is given for a client connection, the
qmp_chardev_open_socket_client method will run an asynchronous
connection attempt. The QIOChannel socket executes this is a single use
background thread, so the connection will succeed immediately (assuming
the server is listening). The chardev, however, won't get the result
from this background thread until the main loop starts running and
processes idle callbacks.
Thus when tcp_chr_wait_connected is run s->ioc will be NULL, but the
state will be TCP_CHARDEV_STATE_CONNECTING, and there may already
be an established connection that will be associated with the chardev
by the pending idle callback. tcp_chr_wait_connected doesn't check the
state, only s->ioc, so attempts to establish another connection
synchronously.
If the server allows multiple connections this is unhelpful but not a
fatal problem as the duplicate connection will get ignored by the
tcp_chr_new_client method when it sees the state is already connected.
If the server only supports a single connection, however, the
tcp_chr_wait_connected method will hang forever because the server will
not accept its synchronous connection attempt until the first connection
is closed.
To deal with this tcp_chr_wait_connected needs to synchronize with the
completion of the background connection task. To do this it needs to
create the QIOTask directly and use the qio_task_wait_thread method.
This will cancel the pending idle callback and directly dispatch the
task completion callback, allowing the connection to be associated
with the chardev. If the background connection failed, it can still
attempt a new synchronous connection.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-15-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In the previous commit
commit 1dc8a6695c
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Tue Aug 16 12:33:32 2016 +0400
char: fix waiting for TLS and telnet connection
the tcp_chr_wait_connected() method was changed to check for a non-NULL
's->ioc' as a sign that there is already a connection present, as
opposed to checking the "connected" flag to supposedly fix handling of
TLS/telnet connections.
The original code would repeatedly call tcp_chr_wait_connected creating
many connections as 'connected' would never become true. The changed
code would still repeatedly call tcp_chr_wait_connected busy waiting
because s->ioc is set but the chardev will never see CHR_EVENT_OPENED.
IOW, the code is still broken with TLS/telnet, but in a different way.
Checking for a non-NULL 's->ioc' does not mean that a CHR_EVENT_OPENED
will be ready for a TLS/telnet connection. These protocols (and the
websocket protocol) all require the main loop to be running in order
to complete the protocol handshake before emitting CHR_EVENT_OPENED.
The tcp_chr_wait_connected() method is only used during early startup
before a main loop is running, so TLS/telnet/websock connections can
never complete initialization.
Making this work would require changing tcp_chr_wait_connected to run
a main loop. This is quite complex since we must not allow GSource's
that other parts of QEMU have registered to run yet. The current callers
of tcp_chr_wait_connected do not require use of the TLS/telnet/websocket
protocols, so the simplest option is to just forbid this combination
completely for now.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-14-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If establishing a client connection fails, the tcp_chr_wait_connected
method should sleep for the reconnect timeout and then retry the
attempt. This ensures the callers don't immediately abort with an
error when the initial connection fails.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-13-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The socket connection state is indicated via the 'bool connected' field
in the SocketChardev struct. This variable is somewhat misleading
though, as it is only set to true once the connection has completed all
required handshakes (eg for TLS, telnet or websockets). IOW there is a
period of time in which the socket is connected, but the "connected"
flag is still false.
The socket chardev really has three states that it can be in,
disconnected, connecting and connected and those should be tracked
explicitly.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-12-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In qmp_chardev_open_socket the code for connecting client chardevs is
split across two conditionals far apart with some server chardev code in
the middle. Split up the method so that code for client connection setup
is separate from code for server connection setup.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-11-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The tcp_chr_wait_connected method can deal with either server or client
chardevs, but some callers only care about one of these possibilities.
The tcp_chr_wait_connected method will also need some refactoring to
reliably deal with its primary goal of allowing a device frontend to
wait for an established connection, which will interfere with other
callers.
Split it into two methods, one responsible for server initiated
connections, the other responsible for client initiated connections.
In doing this split the tcp_char_connect_async() method is renamed
to become consistent with naming of the new methods.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-10-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'sioc' variable in qmp_chardev_open_socket was unused since
commit 3e7d4d20d3
Author: Peter Xu <peterx@redhat.com>
Date: Tue Mar 6 13:33:17 2018 +0800
chardev: use chardev's gcontext for async connect
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-9-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
If no valid char driver was identified the qemu_chr_parse_compat method
was silent, leaving callers no clue what failed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-8-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Now that all validation is separated off into a separate method,
we can directly populate the ChardevSocket struct from the
QemuOpts values, avoiding many local variables.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-7-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'wait'/'nowait' parameter is used to tell server sockets whether to
block until a client is accepted during initialization. Client chardevs
have always silently ignored this option. Various tests were mistakenly
passing this option for their client chardevs.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-6-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The 'reconnect' option is used to give the sleep time, in seconds,
before a client socket attempts to re-establish a connection to the
server. It does not make sense to set this for server sockets, as they
will always accept a new client connection immediately after the
previous one went away.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-5-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The TLS creds option is not valid with certain address types. The user
config was only checked for errors when parsing legacy QemuOpts, thus
the user could pass unsupported values via QMP.
Pull all code for validating options out into a new method
qmp_chardev_validate_socket, that is called from the main
qmp_chardev_open_socket method. This adds a missing check for rejecting
TLS creds with the vsock address type.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-4-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When chardev is multiplexed (mux=on) there are a lot of cases where
CHR_EVENT_OPENED/CHR_EVENT_CLOSED events pairing (expected from
frontend side) is broken. There are either generation of multiple
repeated or extra CHR_EVENT_OPENED events, or CHR_EVENT_CLOSED just
isn't generated at all.
This is mostly because 'qemu_chr_fe_set_handlers()' function makes its
own (and often wrong) implicit decision on updated frontend state and
invokes 'fd_event' callback with 'CHR_EVENT_OPENED'. And even worse,
it doesn't do symmetric action in opposite direction, as someone may
expect (i.e. it doesn't invoke previously set 'fd_event' with
'CHR_EVENT_CLOSED'). Muxed chardev uses trick by calling this function
again to replace callback handlers with its own ones, but it doesn't
account for such side effect.
Fix that using extended version of this function with added argument
for disabling side effect and keep original function for compatibility
with lots of frontends already using this interface and being
"tolerant" to its side effects.
One more source of event duplication is just line of code in
char-mux.c, which does far more than comment above says (obvious fix).
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7dde6abbd21682857f8294644013173c0b9949b3.1541507990.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QEMU_CHAR_FEATURE_GCONTEXT declares the character device can switch
GMainContext.
Assert we don't switch context when the character device doesn't
provide this feature. Character device users must not violate this
restriction. In particular, user configurations that violate them
must be rejected.
Existing frontend that rely on context switching would now assert() if
the backend doesn't allow it (instead of silently producing undesired
events in the default context). Following patches improve the
situation by reporting an error earlier instead, on the frontend side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-4-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Following the example of qemu_opts_print_help(), indent all entries in
the list of character devices.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New option "websocket" added to allow using WebSocket protocol for
chardev socket backend.
Example:
-chardev socket,websocket,server,id=...
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-3-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Upcoming websocket support requires additional parameters in function
headers that are already overloaded. This patch replaces the bunch of
parameters with a single structure pointer.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-2-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
A chardev socket created with the 'fd=' argument is not going to
handle reconnection properly by recycling the same fd (or not in a
supported way). Let's forbid this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemu_chr_parse_socket() fills all ChardevSocket fields, but that
doesn't reflect correctly the arguments given with the options / on
the command line. "reconnect" takes a number as argument, and the
default value is 0, which doesn't help to identify the missing
option. The other arguments have default values that are less
problematic, leave them set by default for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually help and such to
error_printf().
Improves output of -chardev help from
qemu-system-x86_64: -chardev help: Available chardev backend types:
serial
...
to
Available chardev backend types:
serial
...
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181017082702.5581-8-armbru@redhat.com>
GLib child source were added with version 2.28. We can use them now
that we bumped our requirement to 2.40.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is mostly for readability of the code. Let's make it clear which
callers can create an implicit monitor when the chardev is muxed.
This will also enforce a safer behaviour, as we don't really support
creating monitor anywhere/anytime at the moment. Add an assert() to
make sure the programmer explicitely wanted that behaviour.
There are documented cases, such as: -serial/-parallel/-virtioconsole
and to less extent -debugcon.
Less obvious and questionable ones are -gdb, SLIRP -guestfwd and Xen
console. Add a FIXME note for those, but keep the support for now.
Other qemu_chr_new() callers either have a fixed parameter/filename
string or do not need it, such as -qtest:
* qtest.c: qtest_init()
Afaik, only used by tests/libqtest.c, without mux. I don't think we
support it outside of qemu testing: drop support for implicit mux
monitor (qemu_chr_new() call: no implicit mux now).
* hw/
All with literal @filename argument that doesn't enable mux monitor.
* tests/
All with @filename argument that doesn't enable mux monitor.
On a related note, the list of monitor creation places:
- the chardev creators listed above: all from command line (except
perhaps Xen console?)
- -gdb & hmp gdbserver will create a "GDB monitor command" chardev
that is wired to an HMP monitor.
- -mon command line option
From this short study, I would like to think that a monitor may only
be created in the main thread today, though I remain skeptical :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
It's possible to write code creating a chardev backend that is not
registered. When it is not user-created, it makes sense to keep it
hidden. Let the associated frontend destroy it also in this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no obvious reason to have a loop counter. This limits from
reading several megabytes large buffers in one go, since socket
read/write usually have a limit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
A socket chardev may not have associated address (when adding client
fd manually for example). But on disconnect, updating socket filename
expects an address and may lead to this crash:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555d8c70c in SocketAddress_to_str (prefix=0x555556043062 "disconnected:", addr=0x0, is_listen=false, is_telnet=false) at /home/elmarco/src/qq/chardev/char-socket.c:388
388 switch (addr->type) {
(gdb) bt
#0 0x0000555555d8c70c in SocketAddress_to_str (prefix=0x555556043062 "disconnected:", addr=0x0, is_listen=false, is_telnet=false) at /home/elmarco/src/qq/chardev/char-socket.c:388
#1 0x0000555555d8c8aa in update_disconnected_filename (s=0x555556b1ed00) at /home/elmarco/src/qq/chardev/char-socket.c:419
#2 0x0000555555d8c959 in tcp_chr_disconnect (chr=0x555556b1ed00) at /home/elmarco/src/qq/chardev/char-socket.c:438
#3 0x0000555555d8cba1 in tcp_chr_hup (channel=0x555556b75690, cond=G_IO_HUP, opaque=0x555556b1ed00) at /home/elmarco/src/qq/chardev/char-socket.c:482
#4 0x0000555555da596e in qio_channel_fd_source_dispatch (source=0x555556bb68b0, callback=0x555555d8cb58 <tcp_chr_hup>, user_data=0x555556b1ed00) at /home/elmarco/src/qq/io/channel-watch.c:84
Replace filename with a generic "disconnected:socket" in this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For some reason __APPLE__ was not checked in pty code. However, the #ifdef
is redundant: this file is already compiled only if CONFIG_POSIX, same as
util/qemu-openpty.c which it uses.
Reported-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, tcp_chr_update_read_handler() only updated the read
handler. Let's also update the hup handler.
Factorize the code while at it. (note that s->ioc != NULL when
s->connected)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817135224.22971-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 25679e5d58.
This commit broke "reconnect socket" chardev that are created after
"machine_done": they no longer try to connect. It broke also
vhost-user-test that uses chardev while there is no "machine_done"
event.
The goal of this patch was to move the "connect" source to the
frontend context. chr->gcontext is set with
qemu_chr_fe_set_handlers(). But there is no guarantee that it will be
called, so we can't delay connection until then: the chardev should
still attempt to connect during open(). qemu_chr_fe_set_handlers() is
eventually called later and will update the context.
Unless there is a good reason to not use initially the default
context, I think we should revert to the previous state to fix the
regressions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817135224.22971-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 99f2f54174.
See next commit reverting 25679e5d58 as
well for rationale.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180817135224.22971-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the tcp_chr_write function, we checked errno,
but errno was not reset before a read or write operation.
Therefore, this check of errno's actions is often
incorrect after EAGAIN has occurred.
we need check errno together with ret < 0.
Signed-off-by: xinhua.Cao <caoxinhua@huawei.com>
Message-Id: <20180704033642.15996-1-caoxinhua@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fixes: 9fc53a10f8
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a real serial device, the open can block if the handshake
lines are in a particular state. If a QEMU is passing the serial
device to the guest, the QEMU startup is blocked opening the device
(with a symptom seen as a timeout from libvirt).
Open the serial port with O_NONBLOCK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The stdio chardev finalize method calls term_exit() to restore the
original terminal settings that were saved in the "oldtty" global. If
the qemu_chr_open_stdio() method exited with an error, we might not have
any original terminal settings saved in "oldtty" yet.
eg
$ qemu-system-x86_64 -monitor stdio -daemonize
qemu-system-x86_64: -monitor stdio: cannot use stdio with -daemonize
will cause QEMU to splatter the terminal settings with an all-zeros
"struct termios", with predictably unpleasant results. Fortunately the
existing "stdio_in_use" flag is suitable witness for whether "oldtty"
contains settings that need restoring.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180604123043.13985-1-berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we see EAGAIN, no data was sent over the socket, so we still have to
retry sending of msgfds next time.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Remove the 'stair-step output' on stdio.
This partially reverts commit 12fb0ac05, which was correct
on the mailing list but got corrupted by the maintainer :p
Introduced-by: 3b876140-c035-dd39-75d0-d54c48128fac@redhat.com
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180607210818.12727-1-f4bug@amsat.org
Suggested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes a bug in serial that made it almost impossible for guest
to communicate with devices through host's serial.
OPOST flag in c_oflag enables output processing letting other flags in
c_oflag take effect. Usually in c_oflag ONLCR flag is also set, which
causes crlf to be sent in place of lf. This breaks binary transmissions.
Unsetting OPOST flag turns off any output processing which fixes the bug.
Bug reports related:
https://bugs.launchpad.net/qemu/+bug/1772086https://bugs.launchpad.net/qemu/+bug/1407813https://bugs.launchpad.net/qemu/+bug/1715296
also
https://lists.nongnu.org/archive/html/qemu-devel/2006-06/msg00196.html
Signed-off-by: Patryk Olszewski <patryk@fala.ehost.pl>
Message-Id: <1527105041-21013-1-git-send-email-patryk@fala.ehost.pl>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit fb5e19d2e1 originally fixed the
regression, but was inadvertently broken again in merge commit
2d6752d38d.
Fixes:
https://bugs.launchpad.net/qemu/+bug/1654137
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515152500.19460-3-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 1b2503fcf7.
Unfortunately this fix regresses console handling on MIPS Malta;
since the mux ctrl-a b bug is not a regression since 2.11, we
take the conservative approach and just drop it from 2.12.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All the functions in char-fe.c handle the CharBackend
having a NULL Chardev pointer, which means that the
backend exists but is not connected to anything. The
exception is qemu_chr_fe_init(), which will crash if
passed a NULL Chardev pointer argument. This can happen
for various boards if they're started with 'nodefaults':
arm-softmmu/qemu-system-arm -S -nodefaults -M cubieboard
riscv32-softmmu/qemu-system-riscv32 -nodefaults -M sifive_e
Make qemu_chr_fe_init() accept a NULL chardev. This allows
UART models to handle NULL chardev properties without
generally needing to special case them or to manually
create a NullChardev.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180323152948.27048-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This trips Coverity, which believes the subsequent qio_channel_create_watch
can dereference a NULL pointer. In reality, tcp_chr_connect's callers
all have s->ioc properly initialized, since they are all rooted at
tcp_chr_new_client.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TLS handshake may create background GSource tasks, while we won't know
the correct GMainContext until the whole chardev (including frontend)
inited. Let's postpone the initial TLS handshake until machine done.
For dynamically created tcp chardev, we don't postpone that by checking
the init_machine_done variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[peterx: add missing include line, do unit test]
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180308140714.28906-1-peterx@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
When starting QEMU management apps will usually setup a monitor socket, and
then open it immediately after startup. If not using QEMU's own -daemonize
arg, this process can be troublesome to handle correctly. The mgmt app will
need to repeatedly call connect() until it succeeds, because it does not
know when QEMU has created the listener socket. If can't retry connect()
forever though, because an error might have caused QEMU to exit before it
even creates the monitor.
The obvious way to fix this kind of problem is to just pass in a pre-opened
socket file descriptor for the QEMU monitor to listen on. The management
app can now immediately call connect() just once. If connect() fails it
knows that QEMU has exited with an error.
The SocketAddress(Legacy) structs allow for FD passing via the monitor, and
now via inherited file descriptors from the process that spawned QEMU. The
final missing piece is adding a 'fd' parameter in the socket chardev
options.
This allows both HMP usage, pass any FD number with SCM_RIGHTS, then
running HMP commands:
getfd myfd
chardev-add socket,fd=myfd
Note that numeric FDs cannot be referenced directly in HMP, only named FDs.
And also CLI usage, by leak FD 3 from parent by clearing O_CLOEXEC, then
spawning QEMU with
-chardev socket,fd=3,id=mon
-mon chardev=mon,mode=control
Note that named FDs cannot be referenced in CLI args, only numeric FDs.
We do not wire this up in the legacy chardev syntax, so you cannot use FD
passing with '-qmp', you must use the modern '-mon' + '-chardev' pair.
When passing pre-opened FDs there is a restriction on use of TLS encryption.
It can be used on a server socket chardev, but cannot be used for a client
socket chardev. This is because when validating a server's certificate, the
client needs to have a hostname available to match against the certificate
identity.
An illustrative example of usage is:
#!/usr/bin/perl
use IO::Socket::UNIX;
use Fcntl;
unlink "/tmp/qmp";
my $srv = IO::Socket::UNIX->new(
Type => SOCK_STREAM(),
Local => "/tmp/qmp",
Listen => 1,
);
my $flags = fcntl $srv, F_GETFD, 0;
fcntl $srv, F_SETFD, $flags & ~FD_CLOEXEC;
my $fd = $srv->fileno();
exec "qemu-system-x86_64", \
"-chardev", "socket,fd=$fd,server,nowait,id=mon", \
"-mon", "chardev=mon,mode=control";
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To prepare for handling more address types, refactor the parsing of
socket address information to make it more robust and extensible.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Even if common tn3270 implementations do not support TLS, it is trivial to
have them proxied over a proxy like stunnel which adds TLS at the sockets
layer. We should thus not silently skip tn3270 protocol initialization
when TLS is enabled.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
