Commit Graph

432 Commits

Author SHA1 Message Date
Markus Armbruster
d855e27565 ivshmem: Failed realize() can leave migration blocker behind
If pci_ivshmem_realize() fails after it created its migration blocker,
the blocker is left in place.  Fix that by creating it last.

Likewise, if it fails after it called fifo8_create(), it leaks fifo
memory.  Fix that the same way.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-18-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
9cf70c5225 ivshmem: Fix harmless misuse of Error
We reuse errp after passing it host_memory_backend_get_memory().  If
both host_memory_backend_get_memory() and the reuse set an error, the
reuse will fail the assertion in error_setv().  Fortunately,
host_memory_backend_get_memory() can't fail.

Pass it &error_abort to make our assumption explicit, and to get the
assertion failure in the right place should it become invalid.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-17-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
71c265816d ivshmem: Don't destroy the chardev on version mismatch
Yes, the chardev is commonly useless after we read a bad version from
it, but destroying it is inappropriate anyway: the user created it, so
the user should be able to hold on to it as long as he likes.  We
don't destroy it on other errors.  Screwed up in commit 5105b1d.

Stop reading instead.

Also note QEMU's behavior in ivshmem-spec.txt.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-16-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
c20fc0c3ee ivshmem: Drop ivshmem_event() stub
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-15-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
e64befe929 ivshmem: Clean up after commit 9940c32
IVShmemState member eventfd_chr is useless since commit 9940c32.  Drop
it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-14-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
a4fa93bf20 ivshmem: Compile debug prints unconditionally to prevent bit-rot
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-13-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Markus Armbruster
97553976dd ivshmem: Add missing newlines to debug printfs
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1458066895-20632-12-git-send-email-armbru@redhat.com>
2016-03-21 21:29:00 +01:00
Grégory ESTRADE
355a8ccc5c bcm2835_property: implement framebuffer control/configuration properties
The property channel driver now interfaces with the framebuffer device
to query and set framebuffer parameters. As a result of this, the "get
ARM RAM size" query now correctly returns the video RAM base address
(not total RAM size), and the ram-size property is no longer relevant
here.

Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1457467526-8840-5-git-send-email-Andrew.Baumann@microsoft.com
[AB: cleanup/refactoring for upstream submission]
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
a66d815cd5 i.MX: Add i.MX6 CCM and ANALOG device.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9fa80b4d8c5d0f50c94e77d74f952a7a665e168f.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
d552f675fb i.MX: Add the CLK_IPG_HIGH clock
EPIT, GPT and other i.MX timers are using "abstract" clocks among which
a CLK_IPG_HIGH clock.

On i.MX25 and i.MX31 CLK_IPG and CLK_IPG_HIGH are mapped to the same clock
but on other SOC like i.MX6 they are mapped to distinct clocks.

This patch add the CLK_IPG_HIGH to prepare for SOC where these 2 clocks are
different.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 224bf650194760284cb40630e985867e1373276a.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
f4b2add6cc i.MX: Remove CCM useless clock computation handling.
Most clocks supported by the CCM are useless to the qemu framework.

Only clocks related to timers (EPIT, GPT, PWM, WATCHDOG, ...) are usefull
to QEMU code.

Therefore this patch removes clock computation handling for all clocks but:
* CLK_NONE,
* CLK_IPG,
* CLK_32k

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9e7222efb349801032e60c0f6b0fbad0e5dcf648.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Jean-Christophe Dubois
c91a5883c3 i.MX: Rename CCM NOCLK to CLK_NONE for naming consistency.
This way all CCM clock defines/enums are named CLK_XXX

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 8537df765c1713625c7a8b9aca4c7ca60b42e0c0.1456868959.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Fam Zheng
8e41fb63c5 memory: Drop MemoryRegion.ram_addr
All references to mr->ram_addr are replaced by
memory_region_get_ram_addr(mr) (except for a few assertions that are
replaced with mr->ram_block).

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1456813104-25902-5-git-send-email-famz@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-07 13:26:29 +01:00
Andrew Baumann
eab713941a bcm2835_mbox/property: replace ldl_phys/stl_phys with endian-specific accesses
PMM pointed out that ldl_phys and stl_phys are dependent on the CPU's
endianness, whereas device model code should be independent of
it. This changes the relevant Raspberry Pi devices to explicitly call
the little-endian variants.

Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1456880233-22568-1-git-send-email-Andrew.Baumann@microsoft.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04 11:30:18 +00:00
Hervé Poussineau
2d7d06d847 dbdma: warn when using unassigned channel
With this, it's easier to know if a guest uses an invalid and/or unimplemented
DMA channel.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-28 16:19:02 +11:00
Hervé Poussineau
e4d162d72f cuda: remove CUDA_GET_SET_IIC/CUDA_COMBINED_FORMAT_IIC commands
We currently don't emulate the I2C bus provided by CUDA.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:31 +11:00
Hervé Poussineau
e230d43e80 cuda: remove GET_6805_ADDR command
It doesn't seem to be used, and operating systems should accept a 'unknown command' answer.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:31 +11:00
Hervé Poussineau
e647317892 cuda: port SET_TIME command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:31 +11:00
Hervé Poussineau
547a4d1969 cuda: port GET_TIME command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:31 +11:00
Hervé Poussineau
15b7b09b1d cuda: port SET_POWER_MESSAGES command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:31 +11:00
Hervé Poussineau
f5b941120e cuda: port FILE_SERVER_FLAG command to new framework
This command tells if computer should automatically wake-up after a power loss.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
54e894442e cuda: port RESET_SYSTEM command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
017da0b568 cuda: port POWERDOWN command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
216c906e62 cuda: port SET_DEVICE_LIST command to new framework
Also implement the command, by taking device list mask into account
when polling ADB devices.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
374312e7c5 cuda: port SET_AUTO_RATE command to new framework
Also implement the command, by removing the hardcoded period of 20 ms/50 Hz
and replacing it by the one requested by user.
Update VMState version to store this new parameter.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
1cdab10446 cuda: port AUTOPOLL command to new framework
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
0e8176e809 cuda: move unknown commands reject out of switch
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Hervé Poussineau
d20efaeb13 cuda: add a framework to handle commands
Next commits will port existing CUDA commands to this framework.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-02-17 09:59:30 +11:00
Peter Maydell
c964b66022 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-16 14:29:28 +00:00
Stephen Warren
f0afa73164 bcm2835_property: implement "get board revision" query
Return a valid value from the BCM2835 property mailbox query "get board
revision". This query is used by U-Boot. Implementing it fixes the first
obvious difference between qemu and real HW.

The value returned is currently hard-coded to match the RPi2 I own. Other
values are legal, e.g. different board manufacturer field values are
likely to exist in the wild.

Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454993910-24077-1-git-send-email-swarren@wwwdotorg.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-11 11:17:32 +00:00
Eric Blake
d7bce9999d qom: Swap 'name' next to visitor in ObjectPropertyAccessor
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.

Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).

    @ rule1 @
    identifier fn;
    typedef Object, Visitor, Error;
    identifier obj, v, opaque, name, errp;
    @@
     void fn
    - (Object *obj, Visitor *v, void *opaque, const char *name,
    + (Object *obj, Visitor *v, const char *name, void *opaque,
       Error **errp) { ... }

    @@
    identifier rule1.fn;
    expression obj, v, opaque, name, errp;
    @@
     fn(obj, v,
    -   opaque, name,
    +   name, opaque,
        errp)

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Eric Blake
51e72bc1dd qapi: Swap visit_* arguments for consistent 'name' placement
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp).  This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order.  It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.

Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.

Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.

Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
 $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings').  The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.

    // Part 1: Swap declaration order
    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_start_struct
    -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type bool, TV, T1;
    identifier ARG1;
    @@
     bool visit_optional
    -(TV v, T1 ARG1, const char *name)
    +(TV v, const char *name, T1 ARG1)
     { ... }

    @@
    type TV, TErr, TObj, T1;
    identifier OBJ, ARG1;
    @@
     void visit_get_next_type
    -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj, T1, T2;
    identifier OBJ, ARG1, ARG2;
    @@
     void visit_type_enum
    -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
     { ... }

    @@
    type TV, TErr, TObj;
    identifier OBJ;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
     void VISIT_TYPE
    -(TV v, TObj OBJ, const char *name, TErr errp)
    +(TV v, const char *name, TObj OBJ, TErr errp)
     { ... }

    // Part 2: swap caller order
    @@
    expression V, NAME, OBJ, ARG1, ARG2, ERR;
    identifier VISIT_TYPE =~ "^visit_type_";
    @@
    (
    -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
    +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -visit_optional(V, ARG1, NAME)
    +visit_optional(V, NAME, ARG1)
    |
    -visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
    +visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
    |
    -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
    +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
    |
    -VISIT_TYPE(V, OBJ, NAME, ERR)
    +VISIT_TYPE(V, NAME, OBJ, ERR)
    )

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Eric Blake
4fa45492c3 qom: Use typedef for Visitor
No need to repeat 'struct Visitor' when we already have it in
typedefs.h.  Omitting the redundant 'struct' also makes a later
patch easier to search for all object property callbacks that
are associated with a Visitor.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08 17:29:56 +01:00
Andrew Baumann
04f1ab15b9 bcm2835_property: add bcm2835 property channel
This sits behind the mailbox interface, and implements
request/response queries for system properties. The
framebuffer-related properties will be added in a later patch.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:44 +00:00
Andrew Baumann
99494e696e bcm2835_mbox: add BCM2835 mailboxes
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 14:56:32 +00:00
Marc-André Lureau
9940c3236f ivshmem: use a single eventfd callback, get rid of CharDriver
Simplify the interrupt handling by having a single callback on irq&msi
cases. Remove usage of CharDriver, replace it with
qemu_set_fd_handler(). Use event_notifier_test_and_clear() to read the
eventfd.

Before this patch, ivshmem writes the first byte received to
s->intrstatus. But ivshmem_device_spec.txt says "The status register is
set to 1 when an interrupt occurs." Fortunately, the byte usually comes
from another ivshmem device, and those always write 1.

After this commit, follows the specification, set to 1 when an interrupt
occurs.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2016-02-02 13:28:58 +01:00
Marc-André Lureau
fd47bfe5ad ivshmem: generalize ivshmem_setup_interrupts
Call ivshmem_setup_interrupts() with or without MSI, always allocate
msi_vectors that is going to be used in all case in the following patch.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-02-02 13:28:58 +01:00
Marc-André Lureau
47213eb110 ivshmem: remove redundant assignment, fix crash with msi=off
Fix crash when msi=false introduced in 660c97ee (msi_vectors is NULL in
this case)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-02-02 13:28:58 +01:00
Marc-André Lureau
2c64846972 ivshmem: no need for opaque argument
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-02-02 13:28:58 +01:00
Alyssa Milburn
ff472a5bad cuda.c: return error for unknown commands
This avoids MacsBug hanging at startup in the absence of ADB mouse
input, by replying with an error (which is also what MOL does) when
it sends an unknown command (0x1c).

Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30 23:37:38 +11:00
Mark Cave-Ayland
ff57eae5f1 cuda: add missing fields to VMStateDescription
Include some fields missed from the previous VMState conversion to the
migration stream, as well as the new SR_INT delay timer.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30 23:37:36 +11:00
Mark Cave-Ayland
627be2f283 mac_dbdma: add DBDMA controller state to VMStateDescription
Make sure that we include the DBDMA controller state in the migration
stream.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-01-30 23:37:36 +11:00
Peter Maydell
0d1c9782a1 hw/misc: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-25-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Peter Maydell
97d5408f99 pci: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:24 +00:00
Peter Maydell
8ef94f0bc9 arm: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:23 +00:00
Peter Maydell
b6a0aa0537 x86: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell
5af98cc573 unicore: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-9-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell
0d75590d91 ppc: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell
ea99dde191 lm32: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Peter Maydell
3a87d00910 fpu: Replace uint32 typedef with uint32_t
Replace the uint32 softfloat-specific typedef with uint32_t.
This change was made with

find include hw fpu target-* -name '*.[ch]' | xargs sed -i -e 's/\buint32\b/uint32_t/g'

together with manual removal of the typedef definition,
manual undoing of various mis-hits, and another couple of
fixes found via test compilation.

All the uses in hw/ were using the wrong type by mistake.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Leon Alrae <leon.alrae@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Message-id: 1452603315-27030-5-git-send-email-peter.maydell@linaro.org
2016-01-22 15:09:21 +00:00
Peter Crosthwaite
4a94fc9bf2 misc: zynq-xadc: Fix off-by-one
This bounds check was off-by-one. Fix.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1453101737-11255-1-git-send-email-crosthwaite.peter@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21 14:15:04 +00:00
Alistair Francis
8fd06719e7 ssi: Move ssi.h into a separate directory
Move the ssi.h include file into the ssi directory.

While touching the code also fix the typdef lines as
checkpatch complains.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21 14:15:03 +00:00
Jean-Christophe DUBOIS
fea01f9604 i.MX: move i.MX31 CCM object to register array
With this i.MX25 and i.MX31 will have closer implementations.

Moreover all i.MX31 CCM registers are now present.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 15:52:18 +00:00
Peter Maydell
692a5519ab trivial patches for 2016-01-11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWk2pEAAoJEL7lnXSkw9fbYKkIAJED5g08gImjxN5opEh2mxlJ
 /TfzFLmDz6AS67eBjCLVVVI0SZ4RAHyZFySFE8PFeRRQFdigqJUeR2U8Ivwnx2I8
 3ALfKa3H1omEe82o+WGDm9pLkVmzmsLSaUZJ4I7uOSRqSE3w45hMsI5j/sR+hbpy
 yjNOzYFRc84uJswiXUFwsCUCEqokyG83ShjaQpR7J3IjRhe2qqy/WmVi7+ZOBH+/
 ti8ut2PMs8oS4G45uzBPDaSp7ByJ/jP9uc8YrOC1i88jxc+3XXzTLYSn7oX4OPGv
 P0PC6ytBNIwfGaZges1rEGNXryAmJys04GOPt3tqRtT6r7mrEvpLBWZvQru2Z8Y=
 =N4aD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging

trivial patches for 2016-01-11

# gpg: Signature made Mon 11 Jan 2016 08:39:32 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2016-01-11:
  hw/s390x: Remove superfluous return statements
  hw/core/qdev: Remove superfluous return statement
  hw/acpi: Remove superfluous return statement
  hw/ide: Remove superfluous return statements
  osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h
  scripts/checkpatch.pl: Don't allow special cases of unspaced operators
  PCI Bonito: QOMify and cleanup
  SH PCI Host: convert to realize()
  gt64120: convert to realize()
  Add missing syscall nrs. according to more recent Linux kernels
  hw/misc/edu: Convert to realize()
  configure: fix trace backend check
  xen/Makefile.objs: simplify
  crypto: Fix typo in example
  MAINTAINERS: Add the correct device_tree.h file
  iscsi: fix readcapacity error message
  net: convert qemu_log to error_report, fix message
  linux-user: enable sigaltstack for all architectures
  unicore32: convert get_sp_from_cpustate from macro to inline

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11 12:56:58 +00:00
Cao jin
f922254c87 hw/misc/edu: Convert to realize()
for educational PCI device

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11 11:39:28 +03:00
Tetsuya Mukawa
56a571d9c8 ivshmem: Store file descriptor for vhost-user negotiation
If virtio-net driver allocates memory in ivshmem shared memory,
vhost-net will work correctly, but vhost-user will not work because
a fd of shared memory will not be sent to vhost-user backend.
This patch fixes ivshmem to store file descriptor of shared memory.
It will be used when vhost-user negotiates vhost-user backend.

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:20 +02:00
Andrey Smetanin
b67dbb7070 hw/misc: Hyper-V test device 'hyperv-testdev'
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.

Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:35 +01:00
Jean-Christophe Dubois
92eccc6e13 i.MX: Add an i.MX25 specific CCM class/instance
With this CCM, i.MX25 timer is accurate with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net
Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:16 +00:00
Jean-Christophe Dubois
cb54d868c6 i.MX: Split the CCM class into an abstract base class and a concrete class
The IMX_CCM class is now the base abstract class that is used by EPIT
and GPT timer implementation.

IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC.

For now the i.MX25 continues to use the i.MX31 CCM implementation.

An i.MX25 specific CCM will be introduced in a later patch.

We also rework initialization to stop using deprecated sysbus device init.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Jean-Christophe Dubois
aaa9ec3b4d i.MX: rename i.MX CCM get_clock() function and CLK ID enum names
This is to prepare for CCM code refactoring.

This is just a bit of function and enum values renaming.

We also remove some useless intermediate variables.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 53c4d9b9611988a5f56f178f285e04490747925e.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Jean-Christophe Dubois
9de46a0aa3 i.MX: Fix i.MX31 default/reset configuration
Linux on i.MX31/KZM is expecting the CCM to use the CKIH ref clock
instead of the CKIL plus the FPM multiplier.

We change the CCMR reg reset value to match linux expected config.

This allows the CCM to provide a 39MHz clk (as expected by linux)
instead of the actual 50MHz.

With this change the "sleep 60" command on linux is time accurate
with "real world time".

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 6dc5bc4e0a450b20cecdb2991112e7281b653345.1449528242.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17 13:37:15 +00:00
Hervé Poussineau
7f0d763ce6 mac_dbdma: always initialize channel field in DBDMA_channel
dbdma_from_ch() uses channel field to return the right DBDMA object.
Previous code was working if guest OS was only using registered DMA channels.
However, it lead to QEMU crashes if guest OS was using unregistered DMA channels.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-30 19:38:44 +11:00
Markus Armbruster
1d649244b3 ivshmem: Rename property memdev to x-memdev for 2.5
The device's guest interface and its QEMU user interface are
flawed^Whotly debated.  We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.

To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:27 +01:00
Markus Armbruster
2825717c02 ivshmem: Mark questionable socket type test FIXME
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-11-25 10:24:15 +01:00
Guenter Roeck
74fcbd22d2 hw/misc: Add support for ADC controller in Xilinx Zynq 7000
Add support for the Xilinx XADC core used in Zynq 7000.

References:
- Zynq-7000 All Programmable SoC Technical Reference Manual
- 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC
  Dual 12-Bit 1 MSPS Analog-to-Digital Converter

Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree
files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration
multi_v7_defconfig.

Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ PC changes:
  * Changed macro names to match TRM where possible
  * Made programmers model macro scheme consistent
  * Dropped XADC_ZYNQ_ prefix on local macros
  * Fix ALM field width
  * Update threshold-comparison interrupts in _update_ints()
  * factored out DFIFO pushes into helper. Renamed to "push/pop"
  * Changed xadc_reg to 10 bits and added OOB check.
  * Reduced scope of MCTL reset to just stop channel coms.
  * Added dummy read data to write commands
  * Changed _ to - seperators in string names and filenames
  * Dropped ------------ in header comment
  * Catchall'ed _update_ints() in _write handler.
  * Minor whitespace changes.
  * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE()
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12 21:30:42 +00:00
Mark Cave-Ayland
cffc331a31 cuda.c: add delay to setting of SR_INT bit
MacOS 9 is racy when it comes to accessing the shift register. Fix this by
introducing a small delay between data accesses and raising the SR_INT
interrupt bit.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
a53cfdcca2 cuda.c: fix T2 timer and enable its interrupt
Fix the counter loading logic and enable the T2 interrupt when the timer
expires. Otherwise MacOS 9 hangs on boot.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
0174adb611 cuda.c: rename get_counter() state variable from s to ti for consistency
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
eda14abbb8 cuda.c: refactor get_tb() so that the time can be passed in
This is in preparation for sharing the code between timers.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
b5ac04103b cuda.c: add defines for CUDA registers
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
d271ae36dc cuda.c: fix CUDA SR interrupt clearing
Make sure that we also clear the data and clock interrupts at the same time.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:55 +11:00
Mark Cave-Ayland
ce8d3b647b cuda.c: implement dummy IIC access commands
These are used by MacOS 9 on boot. Here we return an error except for 4-byte
commands which write to the IIC bus in a similar manner to MOL.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
f1f46f74a9 cuda.c: implement simple CUDA_GET_6805_ADDR command
This simply returns an empty response with no error status as implemented by
MOL to allow MacOS 9 boot to proceed further.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
4202e63c04 cuda.c: fix CUDA_PACKET response packet format
According to comments in MOL, the response to a CUDA_PACKET should be one of
the following:

Reply: (CUDA_PACKET, status, cmd)
Error: (ERROR_PACKET, status, CUDA_PACKET, cmd)

Update cuda_receive_packet() accordingly to reflect this in order to make
MacOS 9 happy.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Mark Cave-Ayland
6729aa4013 cuda.c: fix CUDA ADB error packet format
According to MOL, ADB error packets should be of the form (type, status, cmd)
rather than just (type, status). This fixes ADB device detection under MacOS 9.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-12 13:15:54 +11:00
Jean-Christophe Dubois
4a6aa0af85 i.MX: Standardize i.MX CCM debug
The goal is to have debug code always compiled during build.

We standardize all debug output on the following format:

[QOM_TYPE_NAME]reporting_function: debug message

The qemu_log_mask() output is following the same format as the
above debug.

Adding some missing qemu_log_mask call for bad registers.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 293e08f31cbb4df84d58f693243e61e770c73b3a.1445781957.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-27 15:59:46 +00:00
Marc-André Lureau
f7a199b2b4 ivshmem: use little-endian int64_t for the protocol
The current ivshmem protocol uses 'long' for integers. But the
sizeof(long) depends on the host and the endianess is not defined, which
may cause portability troubles.

Instead, switch to using little-endian int64_t. This breaks the
protocol, except on x64 little-endian host where this change
should be compatible.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
660c97eef6 ivshmem: use kvm irqfd for msi notifications
Use irqfd for improving context switch when notifying the guest.
If the host doesn't support kvm irqfd, regular msi notifications are
still supported.

Note: the ivshmem implementation doesn't allow switching between MSI and
IO interrupts, this patch doesn't either.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
0f57350e5c ivshmem: rename MSI eventfd_table
The array is used to have vector specific data, so use a more
descriptive name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
d160f3f791 ivshmem: remove EventfdEntry.vector
No need to store an extra int for the vector number when it can be
computed easily by looking at the position in the array.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
d9453c93fe ivshmem: add hostmem backend
Instead of handling allocation, teach ivshmem to use a memory backend.
This allows to use hugetlbfs backed memory now.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
2c04752cc8 ivshmem: use qemu_strtosz()
Use the common qemu utility function to parse the memory size.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
Marc-André Lureau
f689d2811a ivshmem: do not keep shm_fd open
Remove shm_fd from device state, closing it as early as possible to avoid leaks.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-26 10:19:53 +01:00
David Marchand
5105b1d8c2 ivshmem: add check on protocol version in QEMU
Send a protocol version as the first message from server, clients must
close communication if they don't support this protocol version.  Older
QEMUs should be fine with this change in the protocol since they
overrides their own vm_id on reception of an id associated to no
eventfd.

Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[use fifo_update_and_get()]
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:03:18 +02:00
Marc-André Lureau
972ad21553 ivshmem: reset mask on device reset
The interrupt mask is a state value, it should be reset, like the
interrupt status.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
1ee57de444 ivshmem: error on too many eventfd received
The number of eventfd that can be handled per peer is limited by the
number of vectors. Return an error when receiving too many of them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f456179fae ivshmem: replace 'guest' for 'peer' appropriately
The terms 'guest' and 'peer' are used sometime interchangeably which may
be confusing. Instead, use 'peer' for the remote instances of ivshmem
clients, and 'guest' for the local VM.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f64a078d45 ivshmem: fix pci_ivshmem_exit()
Free all objects owned by the device, making sure the device is free,
fixing hot-unplug.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
d383537d01 ivshmem: add device description
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
945001a1af ivshmem: check shm isn't already initialized
The server should not change the shm, and this isn't handled by qemu and
we should should verify this in qemu.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
86d471bfa4 ivshmem: shmfd can be 0
0 is a valid fd value, so change conditions and set -1 value early

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
1f8552df2c ivshmem: migrate with VMStateDescription
load_state_old() is used to keep compatibility with version 0.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
e309366337 ivshmem: use common is_power_of_2()
The common version correctly checks for 0 value case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
6f8a16d55d ivshmem: use common return
Both if branches return, move this out to common end.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
9a2f0e64ae ivshmem: simplify a bit the code
Use some more explicit variables to simplify the code.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
ffa99afd6e ivshmem: print error on invalid peer id
The server shouldn't send invalid peer id, so print an error if it's the
case.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
36617792b4 ivshmem: improve error handling
The test whether the chardev is an AF_UNIX socket rejects
"-chardev socket,id=chr0,path=/tmp/foo,server,nowait -device
ivshmem,chardev=chr0", but fails to explain why.

Use an explicit error on why a chardev may be rejected.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
f59bb37898 ivshmem: improve debug messages
Some misc improvements to ivshmem debug.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:49 +02:00
Marc-André Lureau
95c8425cc3 ivshmem: remove max_peer field
max_peer isn't really useful, it tracks the maximum received VM id, but
that quickly matches nb_peers, the size of the peers array. Since VM
come and go, there might be sparse peers so it doesn't help much in
general to have this value around.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
95e7c8a0f6 ivshmem: initialize max_peer to -1
There is no peer when device is initialized, do not let doorbell for
inexisting peer 0.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
d8a5da075a ivshmem: remove useless ivshmem_update_irq() val argument
val isn't used in ivshmem_update_irq() function.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
81e507f0bc ivshmem: allocate eventfds in resize_peers()
It simplifies a bit the code to allocate the array when setting the
number of peers instead of lazily when receiving the first vector.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
1300b2733a ivshmem: simplify around increase_dynamic_storage()
Set the number of peers and array allocation in a single place. Rename
to better reflect the function content.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
61ea2d8648 ivshmem: limit maximum number of peers to G_MAXUINT16
Limit the maximum number of peers to MAXUINT16. This is more realistic
and better matches the limit of the doorbell register.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
03977ad552 ivshmem: remove last exit(1)
Failing to create a chardev shouldn't be fatal.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
d58d7e848e ivshmem: more qdev conversion
Use the latest qemu device modeling API, in particular, convert to
realize to fix the error handling; right now a botched device_add
ivhsmem command kills the VM.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
49b2951f84 ivshmem: remove useless doorbell field
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
9113e3f394 ivshmem: remove superflous ivshmem_attr field
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
dee2151e72 ivshmem: remove unnecessary dup()
qemu_chr_fe_get_msgfd() transfers ownership, there is no need to dup the
fd.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
0f14fd71c1 ivshmem: factor out the incoming fifo handling
Make a new function fifo_update_and_get() that can be reused by other
functions (in next commits).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
951dada665 ivshmem: fix number of bytes to push to fifo
If the fifo has 0 bytes, and the read is of size 1, the call to
fifo8_push_all() will copy off boundary data.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Marc-André Lureau
b8ab854b27 ivhsmem: read do not accept more than sizeof(long)
ivshmem_read() only reads sizeof(long) from the input buffer.  Accepting
more could lead to fifo8 abort() on 32bit systems if fifo is not empty.

A following patch will change the protocol to 64-bit little-endian
instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
2015-10-24 18:02:48 +02:00
Laurent Vivier
f9f2a9f26f macio: add to bridge category
macio is a bridge between the PCI bus and the Mac nvram,
IDE controller and PIC, so add it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Laurent Vivier
599d7326c3 cuda: add to bridge category
Cuda is a bridge between PowerMac system bus and the ADB controller,
real-time clock, pram and the power management unit.

So add it to the bridge category.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23 12:35:18 +11:00
Peter Crosthwaite
c209b05372 misc: zynq_slcr: Fix MMIO writes
The /4 for offset calculation in MMIO writes was happening twice giving
wrong write offsets. Fix.

While touching the code, change the if-else to be a short returning if
and convert the debug message to a GUEST_ERROR, which is more accurate
for this condition.

Cc: qemu-stable@nongnu.org
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16 13:13:47 +01:00
Paolo Bonzini
c710440235 macio: move DBDMA_init from instance_init to realize
DBDMA_init is not idempotent, and calling it from instance_init
breaks a simple object_new/object_unref pair.  Work around this,
pending qdev-ification of DBDMA, by moving the call to realize.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-4-git-send-email-armbru@redhat.com>
2015-10-09 15:25:57 +02:00
Paolo Bonzini
81e0ab48dd hw: do not pass NULL to memory_region_init from instance_init
This causes the region to outlive the object, because it attaches the
region to /machine.  This is not nice for the "realize" method, but
much worse for "instance_init" because it can cause dangling pointers
after a simple object_new/object_unref pair.

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1443689999-12182-3-git-send-email-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2015-10-09 15:25:56 +02:00
Mark Cave-Ayland
1cde732d88 mac_dbdma: always clear FLUSH bit once DBDMA channel flush is complete
The code to flush the DBDMA channel was effectively duplicated in
dbdma_control_write(), except for the fact that the copy executed outside of a
RUN bit transition was broken by not clearing the FLUSH bit once the flush was
complete.

Newer PPC Linux kernels would timeout waiting for the FLUSH bit to clear again
after submitting a FLUSH command. Fix this by always clearing the FLUSH bit
once the channel flush is complete and removing the repeated code.

Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-09-20 22:48:38 +02:00
Peter Maydell
a2aa09e181 * Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
 * cutils: qemu_strto* wrappers
 * iohandler.c simplification
 * Many other fixes and misc patches.
 
 And some MTTCG work (with Emilio's fixes squashed):
 * Signal-free TCG kick
 * Removing spinlock in favor of QemuMutex
 * User-mode emulation multi-threading fixes/docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
 NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
 fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
 dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
 JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
 7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
 =nB06
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 16:13:16 +01:00
Andrey Smetanin
5f5b5942d5 Added generic panic handler qemu_system_guest_panicked()
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07 18:14:03 +02:00
Markus Armbruster
b45c03f585 arm: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).

Coccinelle semantic patch:

    @@
    type T;
    @@
    -g_malloc(sizeof(T))
    +g_new(T, 1)
    @@
    type T;
    @@
    -g_try_malloc(sizeof(T))
    +g_try_new(T, 1)
    @@
    type T;
    @@
    -g_malloc0(sizeof(T))
    +g_new0(T, 1)
    @@
    type T;
    @@
    -g_try_malloc0(sizeof(T))
    +g_try_new0(T, 1)
    @@
    type T;
    expression n;
    @@
    -g_malloc(sizeof(T) * (n))
    +g_new(T, n)
    @@
    type T;
    expression n;
    @@
    -g_try_malloc(sizeof(T) * (n))
    +g_try_new(T, n)
    @@
    type T;
    expression n;
    @@
    -g_malloc0(sizeof(T) * (n))
    +g_new0(T, n)
    @@
    type T;
    expression n;
    @@
    -g_try_malloc0(sizeof(T) * (n))
    +g_try_new0(T, n)
    @@
    type T;
    expression p, n;
    @@
    -g_realloc(p, sizeof(T) * (n))
    +g_renew(T, p, n)
    @@
    type T;
    expression p, n;
    @@
    -g_try_realloc(p, sizeof(T) * (n))
    +g_try_renew(T, p, n)
    @@
    type T;
    expression n;
    @@
    -(T *)g_new(T, n)
    +g_new(T, n)
    @@
    type T;
    expression n;
    @@
    -(T *)g_new0(T, n)
    +g_new0(T, n)
    @@
    type T;
    expression p, n;
    @@
    -(T *)g_renew(T, p, n)
    +g_renew(T, p, n)

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1440524394-15640-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:27 +01:00
Jean-Christophe Dubois
c14875b2e1 i.MX: Fix Coding style for CCM emulator
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: ff0b6720b1c55204e663f07be47c0203f6871084.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:20 +01:00
Jean-Christophe Dubois
282e74c83f i.MX: Split CCM emulator in a header file and a source file
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13 11:26:20 +01:00
Cormac O'Brien
5c464f66f5 macio: remove nonexistent interrupt on pin 1
The current macio implementation declares an interrupt that doesn't appear to
exist in the hardware or any other emulator implementation. OpenBIOS detects
this interrupt and generates an 'interrupts' property in the macio device tree
entry. Mac OS 9 halts boot when it detects this interrupt, so it has been
removed to permit further progress in the boot process.

Signed-off-by: Cormac O'Brien <i.am.cormac.obrien@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07 17:44:49 +02:00
Markus Armbruster
cc7a8ea740 Include qapi/qmp/qerror.h exactly where needed
In particular, don't include it into headers.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:41 +02:00
Markus Armbruster
d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Peter Maydell
89e9429c3c virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVg+xdAAoJECgfDbjSjVRp6AAH/3ILznMtvJZjQ/WOjLEsL13M
 +0cYEM1LI6LbLhqeruQVVcY9/hx61yHxZMoLkVg/I2po7F4HDNI2vo5Y7eGx+xN0
 5rlcAw9/ZQ6SkCVmjN/VZfISW5mSqCaKH8gNzu8AigjsryJSj5iDXv1YJimwsF+5
 cgCerhLIVvEkXmNj1ChwR+fz1IgFzJ8TRaZ0N2glxLyVjgKS57diqZF3Rbg2DdQl
 BPbekbbtxesPgmKRvtarbhjx26TlnP1YShjhWA5r72gBNlqblLDycpaIGXr34b3a
 sLIZjxzQtTEGcaGtkifMgazyK3rY3JmzOshD0onFOWY1r6Abxuj7eTZOEE6JQXk=
 =tju/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Most notably this includes virtio cross-endian patches.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  vhost: enable vhost without without MSI-X
  pci: Don't register a specialized 'config_write' if default behavior is intended
  hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
  vhost_net: re-enable when cross endian
  vhost-net: tell tap backend about the vnet endianness
  tap: fix non-linux build
  tap: add VNET_LE/VNET_BE operations
  vhost: set vring endianness for legacy virtio
  virtio: introduce virtio_legacy_is_cross_endian()
  linux-headers: sync vhost.h
  vhost-user: part of virtio

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19 11:30:57 +01:00
Shmulik Ladkani
74de5504fd pci: Don't register a specialized 'config_write' if default behavior is intended
Few devices have their specialized 'config_write' methods which simply
call 'pci_default_write_config' followed by a 'msix_write_config' or
'msi_write_config' calls, using exact same arguments.

This is unnecessary as 'pci_default_write_config' already invokes
'msi_write_config' and 'msix_write_config'.

Also, since 'pci_default_write_config' is the default 'config_write'
handler, we can simply avoid the registration of these specialized
versions.

Cc: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-19 12:17:49 +02:00
Markus Armbruster
62e9cd771c macio: Convert to realize()
Convert device models "macio-oldworld" and "macio-newworld".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03 23:56:49 +02:00
Stefan Weil
631b22ea20 misc: Fix new collection of typos
All of them were reported by codespell.
Most typos are in comments, one is in an error message.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:48 +03:00
Mark Cave-Ayland
0e1cd6576c sun4m: fix slavio sysctrl and led register sizes
These were being incorrectly declared as MISC_SIZE (1 byte) rather than
4 bytes and 2 bytes respectively. As a result accesses clamped to the
real register size would unexpectedly fail.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1427987370-15897-1-git-send-email-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27 18:24:18 +02:00
Stefan Weil
77a8257ed7 omap: Fix warnings from Sparse
Sparse report:

arm/omap1.c:1015:9: warning: returning void-valued expression
arm/omap1.c:1084:9: warning: returning void-valued expression
arm/omap1.c:1178:9: warning: returning void-valued expression
arm/omap1.c:1287:9: warning: returning void-valued expression
arm/omap1.c:1382:9: warning: returning void-valued expression
arm/omap1.c:1650:9: warning: returning void-valued expression
arm/omap1.c:1778:9: warning: returning void-valued expression
arm/omap1.c:1985:9: warning: returning void-valued expression
arm/omap1.c:210:9: warning: returning void-valued expression
arm/omap1.c:2213:9: warning: returning void-valued expression
arm/omap1.c:2352:9: warning: returning void-valued expression
arm/omap1.c:2447:9: warning: returning void-valued expression
arm/omap1.c:2640:9: warning: returning void-valued expression
arm/omap1.c:317:9: warning: returning void-valued expression
arm/omap1.c:3413:13: warning: returning void-valued expression
arm/omap1.c:3414:13: warning: returning void-valued expression
arm/omap1.c:3415:14: warning: returning void-valued expression
arm/omap1.c:3589:9: warning: returning void-valued expression
arm/omap1.c:443:9: warning: returning void-valued expression
arm/omap1.c:588:9: warning: returning void-valued expression
arm/omap1.c:860:9: warning: returning void-valued expression
arm/omap2.c:1362:9: warning: returning void-valued expression
arm/omap2.c:450:9: warning: returning void-valued expression
arm/omap2.c:695:9: warning: returning void-valued expression
arm/omap2.c:760:9: warning: returning void-valued expression
hw/char/omap_uart.c:115:9: warning: returning void-valued expression
hw/display/omap_dss.c:1019:9: warning: returning void-valued expression
hw/display/omap_dss.c:215:9: warning: returning void-valued expression
hw/display/omap_dss.c:380:9: warning: returning void-valued expression
hw/display/omap_dss.c:739:9: warning: returning void-valued expression
hw/display/omap_dss.c:931:9: warning: returning void-valued expression
hw/dma/omap_dma.c:139:5: warning: returning void-valued expression
hw/dma/omap_dma.c:1505:9: warning: returning void-valued expression
hw/dma/omap_dma.c:1860:9: warning: returning void-valued expression
hw/gpio/omap_gpio.c:116:9: warning: returning void-valued expression
hw/misc/omap_gpmc.c:627:9: warning: returning void-valued expression
hw/misc/omap_l4.c:85:9: warning: returning void-valued expression
hw/misc/omap_sdrc.c:95:9: warning: returning void-valued expression
hw/misc/omap_tap.c:98:9: warning: returning void-valued expression
hw/sd/omap_mmc.c:409:9: warning: returning void-valued expression
hw/ssi/omap_spi.c:229:9: warning: returning void-valued expression
hw/timer/omap_gptimer.c:447:9: warning: returning void-valued expression

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:11:55 +03:00
Alistair Francis
bbbbd9002f stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).

This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Radim Krčmář
c6dc3dd72b milkymist-pfpu: fix GCC 5.0.0 aggressive-loop-optimizations warning
man gcc:
  Warn if in a loop with constant number of iterations the compiler
  detects undefined behavior in some statement during one or more of
  the iterations.

Milkymist pfpu has no jump instructions, so checking for MICROCODE_WORDS
instructions should have kept us in bounds of s->microcode, but i++
allowed one loop too many,

  hw/misc/milkymist-pfpu.c: In function ‘pfpu_write’:
  hw/misc/milkymist-pfpu.c:365:20: error: loop exit may only be reached after undefined behavior [-Werror=aggressive-loop-optimizations]
                   if (i++ >= MICROCODE_WORDS) {
                      ^
  hw/misc/milkymist-pfpu.c:167:14: note: possible undefined statement is here
       uint32_t insn = s->microcode[pc];
                ^

The code can still access out of bounds, because it presumes that PC register
always begins at 0, and we allow writing to it.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:34 +03:00
Gonglei
6c5819c4d6 macio: fix possible memory leak
If ret = macio_initfn_ide() is less than 0, the timer_memory
will leak the memory it points to.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-10 08:15:34 +03:00
Mark Cave-Ayland
6cb577dde5 cuda.c: include adb_poll_timer in VMStateDescription
Make sure that we include the adb_poll_timer when saving the VM state for
client OSs that use it, e.g. Darwin.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 15:00:05 +01:00
Mark Cave-Ayland
026359238b macio.c: include parent PCIDevice state in VMStateDescription
This ensures that the macio PCI device is correctly configured when restoring
from a VM snapshot.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 15:00:04 +01:00
Peter Maydell
0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Igor Mammedov
1142e45ffd pc: export applesmc IO port/len
IO port and length will be used in following patch
to correctly generate SMC ACPI device in SSDT.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:33:22 +01:00
David Gibson
8af738b3ee Give ivshmem its own config option
Currently the ivshmem device is built whenever both PCI and KVM support are
included.  This patch gives it its own config option to allow easier
customization of whether to include it.  It's enabled by default in the
same circumstances as now - when both PCI and KVM are available.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-27 15:17:46 +01:00
Markus Armbruster
9af21dbee1 pci: Trivial device model conversions to realize
Convert the device models where initialization obviously can't fail.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-26 12:42:16 +01:00
Jiri Slaby
b30934cb52 hw: misc, add educational driver
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:26:55 +01:00
Paolo Bonzini
e720677e32 vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR
variants.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:22:44 +01:00
Kim Phillips
cf7087db10 vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
This is done in preparation for the addition of VFIO platform
device support.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 15:24:06 -07:00
Frank Blaschka
c67676711c vfio: fix adding memory listener to the right address space
Depending on the device, container->space->as contains the valid AddressSpace.
Using address_space_memory breaks devices sitting behind an iommu (and using
a separate address space).

Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 14:40:06 -07:00
Eric Auger
385f57cf9a vfio: migration to trace points
This patch removes all DPRINTF and replace them by trace points.
A few DPRINTF used in error cases were transformed into error_report.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 14:40:06 -07:00
Eric Auger
9fc0e2d8ac vfio: use kvm_resamplefds_enabled()
Use the kvm_resamplefds_enabled function

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:01 +01:00
Andrew Jones
dbc464d401 ivshmem: use error_report
Replace all the fprintf(stderr, ...) calls with error_report.
Also make sure exit() consistently uses the error code 1. A few calls
used -1. While at it cleanup some indentation in the printf argument
lists.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 17:02:22 +01:00
Andreas Färber
3a31cff112 ivshmem: Fix fd leak on error
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 17:02:14 +01:00
Sebastian Krahmer
34bc07c528 ivshmem: Fix potential OOB r/w access
Fix OOB access via malformed incoming_posn parameters
and check that requested memory is actually alloc'ed.

Signed-off-by: Sebastian Krahmer <krahmer@suse.de>
[AF: Rebased, cleanups, avoid fd leak]
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 17:02:07 +01:00