This is a pc & q35 only machine opt.
VMWare apparently doesn't like running under QEMU due to our
incomplete emulation of it's special IO Port. This adds a
pc & q35 property to allow it to be turned off.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of duplicating the logic for the if_ide
(bus,unit) mappings, rely on the blockdev layer
for managing those mappings for us, and use the
drive_get_by_index call instead.
This allows ide_drive_get to work for AHCI HBAs
as well, and can be used in the Q35 initialization.
Lastly, change the nature of the argument to
ide_drive_get so that represents the number of
total drives we can support, and not the total
number of buses. This will prevent array overflows
if the units-per-default-bus property ever needs
to be adjusted for compatibility reasons.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit 868270f23d
acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.
As a result, issues on boot and halt are observed.
Fix this up by doubling reserved memory for new machine types.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc_fw_cfg_guest_info() never does anything, because has_pci_info is
always false.
Introduced in commit f8c457b "pc: pass PCI hole ranges to Guests",
disabled in commit 9604f70 "pc: disable pci-info for 1.6", and hasn't
been enabled since. Obviously a dead end. Get of it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Yet identical to 2.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu side patch to support xen HVM direct kernel boot:
if -kernel exists, calls xen_load_linux(), which will read kernel/initrd
and add a linuxboot.bin or multiboot.bin option rom. The
linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute
kernel directly. It's working when xen uses seabios.
During this work, found the 'kvmvapic' is in option_rom list, it should
not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize()
to handle that.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Changing the ACPI table size causes migration to break, and the memory
hotplug work opened our eyes on how horribly we were breaking things in
2.0 already.
The ACPI table size is rounded to the next 4k, which one would think
gives some headroom. In practice this is not the case, because the user
can control the ACPI table size (each CPU adds 97 bytes to the SSDT and
8 to the MADT) and so some "-smp" values will break the 4k boundary and
fail to migrate. Similarly, PCI bridges add ~1870 bytes to the SSDT.
This patch concerns itself with fixing migration from QEMU 2.0. It
computes the payload size of QEMU 2.0 and always uses that one.
The previous patch shrunk the ACPI tables enough that the QEMU 2.0 size
should always be enough; non-AML tables can change depending on the
configuration (especially MADT, SRAT, HPET) but they remain the same
between QEMU 2.0 and 2.1, so we only compute our padding based on the
sizes of the SSDT and DSDT.
Migration from QEMU 1.7 should work for guests that have a number of CPUs
other than 12, 13, 14, 54, 55, 56, 97, 98, 139, 140. It was already
broken from QEMU 1.7 to QEMU 2.0 in the same way, though.
Even with this patch, QEMU 1.7 and 2.0 have two different ideas of
"-M pc-i440fx-2.0" when there are PCI bridges. Igor sent a patch to
adopt the QEMU 1.7 definition. I think distributions should apply
it if they move directly from QEMU 1.7 to 2.1+ without ever packaging
version 2.0.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc-0.13 and older were missing some compat code that was present on
newer machine-types:
* x86_cpu_compat_disable_kvm_features(FEAT_1_ECX, CPUID_EXT_X2APIC);
(pc-i440fx-1.7 and older)
(added by commit ef02ef5f45)
* x86_cpu_compat_set_features("n270", FEAT_1_ECX, 0, CPUID_EXT_MOVBE);
(pc-i440fx-1.4 and older)
(added by commit 4458c23672
* x86_cpu_compat_set_features("Westmere", FEAT_1_ECX, 0, CPUID_EXT_PCLMULQDQ);
(pc-i440fx-1.4 and older)
(added by commit 56383703c0)
Instead of duplicating the code from the previous pc_compat_*()
functions, we can now reuse pc_compat_1_2() and fix those issues.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU 2.0 changed memory layout for isapc and pc-0.10 to pc-0.13.
This prevents migration from QEMU 1.7.0 for these
machine types when -m 3.5G is specified.
Paolo Bonzini asked that:
smbios_legacy_mode = true;
has_reserved_memory = false;
option_rom_has_mr = true;
rom_file_has_mr = false;
also be done.
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: https://bugs.launchpad.net/qemu/+bug/1334307
Tested-by: "Slutz, Donald Christopher" <dslutz@verizon.com>
This is a pc & q35 only machine opt.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount
of ram below 4G.
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: fix 32 bit
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the link will used later to access device implementing
ACPI functions instead of adhoc lookup in QOM tree.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI
BARs mapping could safely start in high memory.
Allowing BIOS to start mapping 64-bit PCI BARs at address where it
wouldn't conflict with other mappings QEMU might place before it.
That permits QEMU to reserve extra address space before
64-bit PCI hole for memory hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used for PC specific options/variables
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add the "boilerplate" necessary for subsequent patches to
simply drop in compat_props for pc machines 2.0 and older.
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Build an aggregate set of smbios tables and an entry point structure.
Insert tables and entry point into fw_cfg respectively under
"etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor".
Machine types <= 2.0 will for now continue using field-by-field
overrides to SeaBIOS defaults, but for machine types 2.1 and up we
expect the BIOS to look for and use the aggregate tables generated
by this patch.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
[ kraxel: fix 32bit build ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Rename the following symbols:
- smbios_set_type1_defaults() to the more general smbios_set_defaults();
- bool smbios_type1_defaults to the more general smbios_defaults;
- smbios_get_table() to smbios_get_table_legacy();
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At the moment, 2.1 and 2.0 machines are identical.
As several people are working on incompatible changes
to the PC machine, collaboration will be made easier
by merging this place-holder.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When on KVM mode, enable x2apic by default on all CPU models.
Normally we try to keep the CPU model definitions as close as the real
CPUs as possible, but x2apic can be emulated by KVM without host CPU
support for x2apic, and it improves performance by reducing APIC access
overhead. x2apic emulation is available on KVM since 2009 (Linux
2.6.32-rc1), there's no reason for not enabling x2apic by default when
running KVM.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of the feature-specific disable_kvm_pv_eoi() function, create a
more general function that can be used to disable other feature bits in
machine-type compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since
commit 04920fc0fa
loader: store FW CFG ROM files in RAM
RAM MRs including ROM files in FW CFGs are created
and named using the file basename.
This becomes problematic if these names are
supplied by user, since the basename might not
be unique.
There are two cases we care about:
- option-rom flag.
- option ROM for devices. This triggers e.g. when
using rombar=0.
At the moment we get an assert. E.g
qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom
/usr/share/ipxe.efi/8086100e.rom
RAMBlock "/rom@genroms/8086100e.rom" already registered, abort!
This is a regression from 1.6.
For now let's keep it simple and just avoid creating the
MRs in case of option ROMs.
when using 1.7 machine types, enable
option ROMs in RAM to match that version.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
we put copy of ROMs in MR for migration.
but the name rom_in_ram makes one think we
load it in guest RAM.
Rename has_mr to make intent clearer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we have 2 separate qdev devices that both create a qbus of the
same type without specifying a bus name or device name, we end up
with two buses of the same name, such as ide.0 on the Mac machines:
dev: macio-ide, id ""
bus: ide.0
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
If we now spawn a device that connects to a ide.0 the last created
bus gets the device, with the first created bus inaccessible to the
command line.
After some discussion on IRC we concluded that the best quick fix way
forward for this is to make automated bus-class type based allocation
count a global counter. That's what this patch implements. With this
we instead get
dev: macio-ide, id ""
bus: ide.1
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
on the example mentioned above.
This also means that if you did -device ...,bus=ide.0 you got a device
on the first bus (the last created one) before this patch and get that
device on the second one (the first created one) now. Breaks
migration unless you change bus=ide.0 to bus=ide.1 on the destination.
This is intended and makes the bus enumeration work as expected.
As per review request follows a list of otherwise affected boards and
the reasoning for the conclusion that they are ok:
target machine bus id times
------ ------- ------ -----
aarch64 n800 i2c-bus.0 2
aarch64 n810 i2c-bus.0 2
arm n800 i2c-bus.0 2
arm n810 i2c-bus.0 2
-> Devices are only created explicitly on one of the two buses, using
s->mpu->i2c[0], so no change to the guest.
aarch64 vexpress-a15 virtio-mmio-bus.0 4
aarch64 vexpress-a9 virtio-mmio-bus.0 4
aarch64 virt virtio-mmio-bus.0 32
arm vexpress-a15 virtio-mmio-bus.0 4
arm vexpress-a9 virtio-mmio-bus.0 4
arm virt virtio-mmio-bus.0 32
-> Makes -device bus= work for all virtio-mmio buses. Breaks
migration. Workaround for migration from old to new: specify
virtio-mmio-bus.4 or .32 respectively rather than .0 on the
destination.
aarch64 xilinx-zynq-a9 usb-bus.0 2
arm xilinx-zynq-a9 usb-bus.0 2
mips64el fulong2e usb-bus.0 2
-> Normal USB operation not affected. Migration driver needs command
line to use the other bus.
i386 isapc ide.0 2
x86_64 isapc ide.0 2
mips mips ide.0 2
mips64 mips ide.0 2
mips64el mips ide.0 2
mipsel mips ide.0 2
ppc g3beige ide.0 2
ppc mac99 ide.0 2
ppc prep ide.0 2
ppc64 g3beige ide.0 2
ppc64 mac99 ide.0 2
ppc64 prep ide.0 2
-> Makes -device bus= work for all IDE buses. Breaks migration.
Workaround for migration from old to new: specify ide.1 rather than
ide.0 on the destination.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
xenfv has no fwcfg and so does not load acpi from QEMU.
as such new acpi features don't work.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for special usb descriptors used by microsoft
windows. They allow more fine-grained control over driver binding and
adding entries to the registry for configuration.
As this is a guest-visible change the "msos-desc" compat property
has been added to turn this off for 1.7 + older
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the 32bit pci hole start at end of ram, so all possible address
space is covered.
We used to try and make addresses aligned so they are easier to cover
with MTRRs, but since they are cosmetic on KVM, this is probably not
worth worrying about.
Of course the firmware can use less than that. Leaving space unused is
no problem, mapping pci bars outside the hole causes problems though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Map 3G (i440fx) of memory below 4G, so the RAM pieces
are nicely aligned to gigabyte borders.
Keep old memory layout for (a) old machine types and (b) in case all
memory fits below 4G and thus we don't have to split RAM into pieces
in the first place. The later makes sure this change doesn't take
away memory from 32bit guests.
So, with i440fx and up to 3.5 GB of memory, all of it will be mapped
below 4G. With more than 3.5 GB of memory 3 GB will be mapped below
4G and the remaining amount will be mapped above 4G.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.
Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs,
no version. Best SeaBIOS can do, but we can provide better defaults:
manufacturer QEMU, product & version taken from QEMUMachine desc and
name.
Take care to do this only for new machine types, of course.
Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member
product stable in the future. Use copies instead, and in a way that
makes it obvious that they're guest ABI.
Note that we can be trusted to keep values of member name, because
that has always been ABI.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It doesn't make sense for a region to be INT64_MAX in size:
memory core uses UINT64_MAX as a special value meaning
"all 64 bit" this is what was meant here.
While this should never affect the PC system which at the moment always
has < 63 bit size, this makes us hit all kind of corner case bugs with
sub-pages, so users are probably better off if we just use UINT64_MAX
instead.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With a help of negative memory region priority PCI address space
is mapped underneath RAM regions effectively catching every access
to addresses not mapped by any other region.
It simplifies PCI address space mapping into system address space.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The BIOS that we ship in 1.7 does not use pci info
from host and so far isn't going to use it.
Taking in account problems it caused see 9604f70fdf and
to avoid future incompatibility issues, it's safest to
disable that interface by default for all machine types
including 1.7 as it was never exposed/used by guest.
And properly remove/cleanup it during 1.8 development cycle.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable acpi build for isapc and no_kvmclock machine
types (used by xen), since acpi build currently expects pci.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This adds C code for generating ACPI tables at runtime,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Although ACPI tables come from a system BIOS on real hw,
it makes sense that the ACPI tables are coupled with the
virtual machine, since they have to abstract the x86 machine to
the OS's.
This is widely desired as a way to avoid the churn
and proliferation of QEMU-specific interfaces
associated with ACPI tables in bios code.
Notes:
As BIOS can reprogram devices prior to loading
ACPI tables, we pre-format ACPI tables but defer loading
hardware configuration there until tables are loaded.
The code structure was intentionally kept as close
to the seabios original as possible, to simplify
comparison and making sure we didn't lose anything
in translation.
Minor code duplication results, to help ensure there are no functional
regressions, I think it's better to merge it like this and do more code
changes in follow-up patches.
Cross-version compatibility concerns have been addressed:
ACPI tables are exposed to guest as FW_CFG entries.
When running with -M 1.5 and older, this patch disables ACPI
table generation, and doesn't expose ACPI
tables to guest.
As table content is likely to change over time,
the following measures are taken to simplify
cross-version migration:
- All tables besides the RSDP are packed in a single FW CFG entry.
This entry size is currently 23K. We round it up to 64K
to avoid too much churn there.
- Tables are placed in special ROM blob (not mapped into guest memory)
which is automatically migrated together with the guest, same
as BIOS code.
- Offsets where hardware configuration is loaded in ACPI tables
are also migrated, this is in case future ACPI changes make us
rearrange the tables in memory.
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Anthony PERARD
# Via Stefano Stabellini
* sstabellini/xen-2013-09-09:
pc_q35: Initialize Xen.
pc: Initializing ram_memory under Xen.
Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).
RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.
The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.
qemu-system-x86_64 -device e1000,mitigation=on,... ...
For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have a lot of code duplication between machine types,
this increases with each new machine type
and each new field.
This has already introduced a minor bug: description
for pc-1.3 says "Standard PC" while description for
pc-1.4 is "Standard PC (i440FX + PIIX, 1996)"
which makes you think 1.3 is somehow more standard,
or newer, while in fact it's a revision of the same PC.
This patch addresses this issue by using macros, along
the lines used by PC_COMPAT_X_X - only for
non-property options.
The approach can extend to non-PC machine types.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All callers always use the same values (get_system_memory(),
get_system_io()), so the parameters are pointless.
If one day we decide to eliminate get_system_memory() and
get_system_io(), we will be able to do that more easily by adding the
values to struct QEMUMachineInitArgs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It just needs to set has_pvpanic=false after calling it. This way, it
won't be a special case anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Making the older compat functions call the newer compat functions at the
beginning allows the older functions undo what's done by newer compat
functions. e.g.: pc_compat_1_4() will be able to call pc_compat_1_5()
and then set has_pvpanic=false.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The pc_init_pci_1_2()/pc_init_pci_1_0() split was made on commit
6fd028f64f, in preparation for commit
9953f8822c. The latter was reverted, so there's
no reason to keep two separate functions that do exactly the same, anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Don't explode QEMUMachineInitArgs before passing it to pc_init1().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.
Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.
Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.
Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make 1.4 compat code call the 1.6 one, reducing
code duplication. Add comment explaining why we can't
make 1.4 call 1.5 as usual.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Context matching caused the 'has_pvpanic = true' to be applied to
the 1.6 machine type instead of the 1.5 machine type.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch is based on Hu Tao's:
http://lists.nongnu.org/archive/html/qemu-devel/2013-08/msg00124.html
No need to hard-code pvpanic as part of the machine.
It can be added with "-device pvpanic" from command line (The next patch).
Anyway, for backport compatibility it is still part of 1.5
machine.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Message-id: 1376233843-19410-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 41cb383f42 made a guest-visible
change by adding the PCLMULQDQ bit to Westmere without adding
compatibility code to keep the ABI for older machine-types.
Fix it by adding the missing compat code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the new semantics of pc_sysfw (no -pflash implies "old-style" ROM setup,
-pflash implies "new-style" ROM setup), there is no need anymore for a compat
property. Old machines simply will never use -pflash, and thus will always
use old-style setup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The BIOS that we ship in 1.6 does not use pci info
from host (yet). Several issues turned up
(e.g. around winXP boot crashes). So it's safest to disable that
interface for 1.6 machine types for now, leave it on for 1.7
as we have enough time to fix issues if any.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.
Examples:
-global i440FX-pcihost.pci-hole64-size=4G
-global q35-pcihost.pci-hole64-size=4G
Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure 1.4 calls 1.5, 1.3 calls 1.4 etc.
This way it's enough to add enough new compat hook
in a single place in piix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest currently has to jump through lots of hoops to guess the PCI hole
ranges. It's fragile, and makes us change BIOS each time we add a new
chipset. Let's report the window in a ROM file, to make BIOS do exactly
what QEMU intends.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit 9f24a8030a.
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
commit 7b074a22da changed the serial
number of hid devices. Add compat properties to keep the old serial
number for qemu 0.12 and older.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
The CPUID model values on Conroe, Penryn, and Nehalem are too
conservative and don't reflect the values found on real Conroe, Penryn,
and Nehalem CPUs.
This causes at least one known problems: Windows XP disables sysenter
when (family == 6 && model <= 2), but Skype tries to use the sysenter
instruction anyway because it is reported as available on CPUID, making
it crash.
This patch sets appropriate model values that correspond to real Conroe,
Penryn, and Nehalem CPUs.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some CPU model fixes are going to be included and they will require
compatibility properties in the pc-*-1.5 machine-types.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* sstabellini/xen_fixes_20130603:
xen: use pc_init_pci instead of pc_init_pci_no_kvmclock
xen: remove xen_vcpu_init
xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)
xen_machine_pv: do not create a dummy CPU in machine->init
main_loop: do not set nonblocking if xen_enabled()
xen: simplify xen_enabled
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Call kvmclock_create only if kvmclock_enabled.
Use pc_init_pci on Xen rather than pc_init_pci_no_kvmclock.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
No need for xen_vcpu_init anymore:
- the RTC emulator doesn't have any periodic timers continuously running
even in absence of guest interactions anymore;
- qemu_dummy_start_vcpu takes care of disabling TCG for us, so we don't
need to do it manually here.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
We are currently setting the PCI hole to start at HVM_BELOW_4G_RAM_END,
that is 0xf0000000.
Start the PCI hole at 0xe0000000 instead, that is the same value used by
pc_init1 and qemu-xen-traditional.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
CC: qemu-stable@nongnu.org
Currently some places use pointer-to-void even though they mean
pointer-to-FWCfgState. Clean them up.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is
needed when booting 3.8 and later linux kernels built with the MATOM
target because we require MOVBE in order to boot properly now.
Signed-off-by: Borislav Petkov <bp@suse.de>
[ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
X86CPU should have parent bus so it could provide bus for child APIC.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Provides a hotpluggable bus for APIC and CPU.
* icc-bridge will serve as a parent for icc-bus and provide
mmio mapping services to child icc-devices.
* icc-device will replace SysBusDevice as a parent of APIC
and IOAPIC devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduced when applying commit f81222b (audio: look for the ISA and
PCI buses, 2013-04-18).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1367330432-14417-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the next commit easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just to make the commit after next easier to review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Functions defined in acpi/ should be declared in
acpi.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Dr. David Alan Gilbert
Markus Armbruster
John Snow
Michael S. Tsirkin
Jan Kiszka
Chunyan Liu
Paolo Bonzini
Stefan Weil
Eduardo Habkost
Don Slutz
Igor Mammedov
Marcel Apfelbaum
Gabriel L. Somlo
Alexander Graf
Peter Maydell
Andreas Färber
Gerd Hoffmann
Liu Ping Fan
Anthony Liguori
Anthony PERARD
Vincenzo Maffione
Anthony Liguori
David Gibson
Paul Durrant
Stefano Stabellini
Blue Swirl
Laszlo Ersek
Jordan Justen
Borislav Petkov
Hu Tao