Record the largest page size in use; we'll need it soon for allocating
temporary buffers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unfortunately madvise DONTNEED doesn't work on hugepagetlb
so use fallocate(FALLOC_FL_PUNCH_HOLE)
qemu_fd_getpagesize only sets the page based off a file
if the file is from hugetlbfs.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-6-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Clear cache->mr so that address_space_cache_destroy does nothing
the second time it is called.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers. This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.
This version of the patch augments and tidies up comments a little.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ldl_p has a signed return type so assigning it to uint64_t implicitly
sign-extends the value. This results in devices with min_access_size = 8
seeing unexpected values passed to their write handlers.
Example: guest performs a 32-bit write of 0x80000000 to an mmio region
and the handler receives 0xFFFFFFFF80000000 in its value argument.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-Id: <1485440557-10384-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
rcu_read_unlock was not called if the address_space_access_valid result is
negative.
This caused (at least) a problem when qemu on PPC/E500+TAP failed to terminate
properly and instead got stuck in a deadlock.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20170109110921.4931-1-rka@sysgo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
This patch introduces a helper to query the iotlb entry for a
possible iova. This will be used by later device IOTLB API to enable
the capability for a dataplane (e.g vhost) to query the IOTLB.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device models often have to perform multiple access to a single
memory region that is known in advance, but would to use "DMA-style"
functions instead of address_space_map/unmap. This can happen
for example when the data has to undergo endianness conversion.
Introduce a new data structure to cache the result of
address_space_translate without forcing usage of a host address
like address_space_map does.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This extracts the common part of address_space_map and
address_space_cache_init into a new function.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Templatize the address_space_* and *_phys functions, so that we can add
similar functions in the next patch that work with a lightweight,
cache-like version of address_space_map/unmap.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do them right before the next patch generalizes them into a multi-included
file.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A bug (1647683) was reported showing a crash when removing
breakpoints. The reproducer was bisected to 3359baad when tb_flush
was finally made thread safe. While in MTTCG the locking in
breakpoint_invalidate would have prevented any problems, but
currently tb_lock() is a NOP for system emulation.
The race is between a tb_flush from the gdbstub and the
tb_invalidate_phys_addr() in breakpoint_invalidate().
Ideally we'd have actual locking here; for the moment the
simple fix is to do a full tb_flush() for a bp invalidate,
since that is thread-safe even if no lock is taken.
Reported-by: Julian Brown <julian@codesourcery.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1481047629-7763-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* NBD write zeroes support (Eric)
* Memory backend fixes (Haozhong)
* Atomics fix (Alex)
* New AVX512 features (Luwei)
* "make check" logging fix (Paolo)
* Chardev refactoring fallout (Paolo)
* Small checkpatch improvements (Paolo, Jeff)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQExBAABCAAbBQJYGaRPFBxwYm9uemluaUByZWRoYXQuY29tAAoJEL/70l94x66D
XKgH/RgNtosBTqJsmphkS7wACFAFOf7Uq46ajoKfB66Pt1J/++pFQg4TApPYkb7j
KlKeKmXa7hb6+Jg8325H4zGkGno4kn2dE+OnznaB1xPKwiZVAMQVzQsagsEVqpno
k/5PBVRptIiuHQKyU29Go0CxbWJBTH0O14S7rDK4YDF0YMnuT280HQOI3jdu1igV
G/Q+CMgfk+yXf6GWHE8Z9sNq7n0ha8qgruA/X3NC7+pAvEsUcAP065zwLp9weYuK
W1MU68L7Ub4tRo0SVf1HFkDUNdMv4T4hg+wpGe1GwthJWexHu9x0YAQBy60ykJb6
NtHwjLwCUWtm7AiZD/btsOJPmjk=
=+Dt/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* NBD bugfix (Changlong)
* NBD write zeroes support (Eric)
* Memory backend fixes (Haozhong)
* Atomics fix (Alex)
* New AVX512 features (Luwei)
* "make check" logging fix (Paolo)
* Chardev refactoring fallout (Paolo)
* Small checkpatch improvements (Paolo, Jeff)
# gpg: Signature made Wed 02 Nov 2016 08:31:11 AM GMT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (30 commits)
main-loop: Suppress I/O thread warning under qtest
docs/rcu.txt: Fix minor typo
vl: exit qemu on guest panic if -no-shutdown is not set
checkpatch: allow spaces before parenthesis for 'coroutine_fn'
x86: add AVX512_4VNNIW and AVX512_4FMAPS features
slirp: fix CharDriver breakage
qemu-char: do not forward events through the mux until QEMU has started
nbd: Implement NBD_CMD_WRITE_ZEROES on client
nbd: Implement NBD_CMD_WRITE_ZEROES on server
nbd: Improve server handling of shutdown requests
nbd: Refactor conversion to errno to silence checkpatch
nbd: Support shorter handshake
nbd: Less allocation during NBD_OPT_LIST
nbd: Let client skip portions of server reply
nbd: Let server know when client gives up negotiation
nbd: Share common option-sending code in client
nbd: Send message along with server NBD_REP_ERR errors
nbd: Share common reply-sending code in server
nbd: Rename struct nbd_request and nbd_reply
nbd: Rename NbdClientSession to NBDClientSession
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the memory backend file is not large enough to hold the required 'size',
Qemu will report error and exit.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20161027042300.5929-3-haozhong.zhang@intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20161102010551.2723-1-haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reuse the existing locking provided by stdio to keep in_asm, cpu,
op, op_opt, op_ind, and out_asm as contiguous blocks.
While it isn't possible to interleave e.g. in_asm or op_opt logs
because of the TB lock protecting all code generation, it is
possible to interleave cpu logs, or to interleave a cpu dump with
an out_asm dump.
For mingw32, we appear to have no viable solution for this. The locking
functions are not properly exported from the system runtime library.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For '-object memory-backend-file,mem-path=foo,size=xyz', if the size of
file 'foo' does not match the given size 'xyz', the current QEMU will
truncate the file to the given size, which may corrupt the existing data
in that file. To avoid such data corruption, this patch disables
truncating non-empty backend files.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20161027042300.5929-2-haozhong.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the linux-user case all things that involve ''l1_map' and PageDesc
tweaks are protected by the memory lock (mmpa_lock). For SoftMMU mode
we previously relied on single threaded behaviour, with MTTCG we now use
the tb_lock().
As a result we need to do a little re-factoring and push the taking of
this lock up the call tree. This requires a slightly different entry for
the SoftMMU and user-mode cases from tb_invalidate_phys_range.
This also means user-mode breakpoint insertion needs to take two locks
but it hadn't taken any previously so this is an improvement.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20161027151030.20863-20-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This protects all translation related work with tb_lock() too ensure
thread safety. This effectively serialises all code generation. In
addition to the code generation we also take the lock for TB
invalidation. This has a knock on effect of meaning tb_lock() is held
for modification of the SoftMMU TLB by non-self threads which will be
used in later patches.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-8-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[AJB: moved into tree, clean-up history]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-10-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
-----BEGIN PGP SIGNATURE-----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=T2kg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
x86 and CPU queue, 2016-10-24
x2APIC support to APIC code, cpu_exec_init() refactor on all
architectures, and other x86 changes.
# gpg: Signature made Mon 24 Oct 2016 20:51:14 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-pull-request:
exec: call cpu_exec_exit() from a CPU unrealize common function
exec: move cpu_exec_init() calls to realize functions
exec: split cpu_exec_init()
pc: q35: Bump max_cpus to 288
pc: Require IRQ remapping and EIM if there could be x2APIC CPUs
pc: Add 'etc/boot-cpus' fw_cfg file for machine with more than 255 CPUs
Increase MAX_CPUMASK_BITS from 255 to 288
pc: Clarify FW_CFG_MAX_CPUS usage comment
pc: kvm_apic: Pass APIC ID depending on xAPIC/x2APIC mode
pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC mode
pc: apic_common: Restore APIC ID to initial ID on reset
pc: apic_common: Extend APIC ID property to 32bit
pc: Leave max apic_id_limit only in legacy cpu hotplug code
acpi: cphp: Force switch to modern cpu hotplug if APIC ID > 254
pc: acpi: x2APIC support for SRAT table
pc: acpi: x2APIC support for MADT table and _MAT method
Conflicts:
target-arm/cpu.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As cpu_exec_exit() mirrors the cpu_exec_realizefn(),
rename it as cpu_exec_unrealizefn().
Create and register a cpu_common_unrealizefn() function for
the CPU device class and call cpu_exec_unrealizefn() from
this function.
Remove cpu_exec_exit() from cpu_common_finalize()
(which mirrors init, not realize), and as x86_cpu_unrealizefn()
and ppc_cpu_unrealizefn() overwrite the device class unrealize function,
add a call to a parent_unrealize pointer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Modify all CPUs to call it from XXX_cpu_realizefn() function.
Remove all the cannot_destroy_with_object_finalize_yet as
unsafe references have been moved to cpu_exec_realizefn().
(tested with QOM command provided by commit 4c315c27)
for arm:
Setting of cpu->mp_affinity is moved from arm_cpu_initfn()
to arm_cpu_realizefn() as setting of cpu_index is now done
in cpu_exec_realizefn(). To avoid to overwrite an user defined
value, we set it to an invalid value by default, and update
it in realize function only if the value is still invalid.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Put in cpu_exec_initfn() what initializes the CPU,
and leave in cpu_exec_init() what adds it to the environment.
As cpu_exec_initfn() is called by all XX_cpu_initfn(), call it
directly in cpu_common_initfn().
cpu_exec_init() is now a realize function, it will be renamed
to cpu_exec_realizefn() and moved to the XX_cpu_realizefn()
function in a following patch.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support target CPUs having a page size which isn't knownn
at compile time. To use this, the CPU implementation should:
* define TARGET_PAGE_BITS_VARY
* not define TARGET_PAGE_BITS
* define TARGET_PAGE_BITS_MIN to the smallest value it
might possibly want for TARGET_PAGE_BITS
* call set_preferred_target_page_bits() in its realize
function to indicate the actual preferred target page
size for the CPU (and report any error from it)
In CONFIG_USER_ONLY, the CPU implementation should continue
to define TARGET_PAGE_BITS appropriately for the guest
OS page size.
Machines which want to take advantage of having the page
size something larger than TARGET_PAGE_BITS_MIN must
set the MachineClass minimum_page_bits field to a value
which they guarantee will be no greater than the preferred
page size for any CPU they create.
Note that changing the target page size by setting
minimum_page_bits is a migration compatibility break
for that machine.
For debugging purposes, attempts to use TARGET_PAGE_SIZE
before it has been finally confirmed will assert.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Allocate sub_section dynamically. Remove dependency
on TARGET_PAGE_SIZE to make run-time page size detection
for arm platforms.
Signed-off-by: Vijaya Kumar K <vijayak@cavium.com>
Message-id: 1465808915-4887-3-git-send-email-vijayak@caviumnetworks.com
[PMM: use flexible array member rather than separate malloc
so we don't need an extra pointer deref when using it]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit d2f39ad "exec.c: Ensure right alignment also for file backed ram"
added an additional alignment requirement on the size of backend file
besides the previous page size. On x86, the alignment is changed from
4KB in QEMU 2.6 to 2MB in QEMU 2.7.
This change breaks certain usages in QEMU 2.7 on x86, e.g.
-object memory-backend-file,id=mem1,mem-path=/tmp/,size=$SZ
-device pc-dimm,id=dimm1,memdev=mem1
where $SZ is multiple of 4KB but not 2MB (e.g. 1023M). QEMU 2.7
reports the following error message and aborts:
qemu-system-x86_64: -device pc-dimm,memdev=mem1,id=nv1: backend memory size must be multiple of 0x200000
The same regression may also happen in other platforms as indicated by
Igor Mammedov. This change is however necessary for s390 according to
the commit message of d2f39ad, so we workaround the regression by taking
the change only on s390.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reported-by: "Xu, Anthony" <anthony.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the page size in each RAMBlock, we need it later.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since commit b35ba30f8f when it was introduced, phys_page_compact()
takes an unused compacted argument.
ubsan complains about it when launching qemu-x86_64 without arguments:
qemu/exec.c:310:5: runtime error: variable length array bound evaluates to non-positive value 0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_setup_guest_memory only does "madvise to QEMU_MADV_DONTFORK" and
is only called by ram_block_add, which actually is duplicate code.
Bonus: add simple comment for kvm_has_sync_mmu to make life easier.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Message-Id: <1473662096-32598-1-git-send-email-caoj.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
instead of accessing tqe_prev field dircetly outside
of queue.h use macros to check if element is in list
and make sure that afer element is removed from list
tqe_prev field could be used to do the same check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469450832-84343-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure that cpu_index auto allocation isn't used in
combination with manual cpu_index assignment. And
dissallow out of order cpu removal if auto allocation
is in use.
Target that wishes to support out of order unplug should
switch to manual cpu_index assignment. Following patch
could be used as an example:
(pc: init CPUState->cpu_index with index in possible_cpus[]))
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When adding hostmem backend at runtime, QEMU might exit with error:
"os_mem_prealloc: Insufficient free host memory pages available to allocate guest RAM"
It happens due to os_mem_prealloc() not handling errors gracefully.
Fix it by passing errp argument so that os_mem_prealloc() could
report error to callers and undo performed allocation when
os_mem_prealloc() fails.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469008443-72059-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It keeps the legacy behavior for all users that doesn't care
about stable cpu_index value, but would allow boards that
would support device_add/device_del to set stable cpu_index
that won't depend on order in which cpus are created/destroyed.
While at that simplify cpu_get_free_index() as cpu_index
generated by USER_ONLY and softmmu variants is the same
since none of the users support cpu-remove so far, except
of not yet released spapr/x86 device_add/delr, which
will be altered by follow up patches to set stable
cpu_index manually.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead use QTAIL's tqe_prev field to detect if cpu's been
placed in list by cpu_exec_init() which is always set if
QTAIL element is in list.
Fixes SIGSEGV on failure path in case cpu_index is assigned
by board and cpu.relalize() fails before cpu_exec_init() is called.
In follow up patches, cpu_index will be assigned by boards that
support cpu hot(un)plug and need stable cpu_index that doesn't
depend on order cpus are created/removed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
this is the first step in reducing the brk heap fragmentation
created by the map->nodes memory allocation. Since the introduction
of RCU the freeing of the PhysPageMaps is delayed so that sometimes
several hundred are allocated at the same time.
Even worse the memory for map->nodes is allocated and shortly
afterwards reallocated. Since the number of nodes it grows
to in the end is the same for all PhysPageMaps remember this value
and at least avoid the reallocation.
The large number of simultaneous allocations (about 450 x 70kB in
my configuration) has to be addressed later.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468577030-21097-1-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since f615f39 (exec: remove ram_addr argument from
qemu_ram_block_from_host), migration under Xen is likely to fail, with a
SEGV of QEMU. But the commit only reveal a bug with the calculation of
the offset value in qemu_ram_block_from_host().
This patch calculates the offset from the ram_addr as
qemu_ram_addr_from_host() will later calculate the ram_addr from the
offset.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
The function cpu_resume_from_signal() is now always called with a
NULL puc argument, and is rather misnamed since it is never called
from a signal handler. It is essentially forcing an exit to the
top level cpu loop but without raising any exception, so rename
it to cpu_loop_exit_noexc() and drop the useless unused argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
Here's another ppc patch queue. This batch is all preliminaries
towards two significant features:
1) Full hypervisor-mode support for POWER8
Patches 1-8 start fixing various bugs with TCG's handling of
hypervisor mode
2) CPU hotplug support
Patches 9-12 make some preliminary fixes towards implementing CPU
hotplug on ppc64 (and other non-x86 platforms). These patches are
actually to generic code, not ppc, but are included here with
Paolo's ACK.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vAIf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.7-20160531' into staging
ppc patch queue for 2016-05-31
Here's another ppc patch queue. This batch is all preliminaries
towards two significant features:
1) Full hypervisor-mode support for POWER8
Patches 1-8 start fixing various bugs with TCG's handling of
hypervisor mode
2) CPU hotplug support
Patches 9-12 make some preliminary fixes towards implementing CPU
hotplug on ppc64 (and other non-x86 platforms). These patches are
actually to generic code, not ppc, but are included here with
Paolo's ACK.
# gpg: Signature made Tue 31 May 2016 01:39:44 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160531:
cpu: Add a sync version of cpu_remove()
cpu: Reclaim vCPU objects
exec: Do vmstate unregistration from cpu_exec_exit()
exec: Remove cpu from cpus list during cpu_exec_exit()
ppc: Add PPC_64H instruction flag to POWER7 and POWER8
ppc: Get out of emulation on SMT "OR" ops
ppc: Fix sign extension issue in mtmsr(d) emulation
ppc: Change 'invalid' bit mask of tlbiel and tlbie
ppc: tlbie, tlbia and tlbisync are HV only
ppc: Do some batching of TCG tlb flushes
ppc: Use split I/D mmu modes to avoid flushes on interrupts
ppc: Remove MMU_MODEn_SUFFIX definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpu_exec_init() does vmstate_register for the CPU device. This needs to be
undone from cpu_exec_exit(). This change is needed to support CPU hot
removal.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[dwg: added missing include to fix compile on some archs]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
