Since TCG_TYPE_I32 values are kept sign-extended in registers, via "w"
instructions, we don't need to extend if the register matches.
This is already relied upon by comparisons.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will want a backend interface for register swapping.
This is only properly defined for x86; all others get a
stub version that always indicates failure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is common code in most qemu_{ld,st} slow paths, extending the
input value for the store helper data argument or extending the
return value from the load helper.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type truncation. For those backends
that did not enable TCG_TARGET_HAS_extrl_i64_i32, use tcg_out_mov.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with zero.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for type extension with sign.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 32-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 16-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit zero-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will need a backend interface for performing 8-bit sign-extend.
Use it in tcg_reg_alloc_op in the meantime.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We failed to update this with the w^x split, so misses the fact
that true pc-relative offsets are usually small.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230117230415.354239-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that tcg can handle direct and indirect goto_tb simultaneously,
we can optimistically leave space for a direct branch and fall back
to loading the pointer from the TB for an indirect branch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Install empty versions for !TCG_TARGET_HAS_direct_jump hosts.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace 'tc_ptr' and 'addr' with 'tb' and 'n'.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test TCG_TARGET_HAS_direct_jump instead of testing an
implementation pointer.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
/tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
=SH+C
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.
Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.
Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There was a typo using opc_addi instead of opc_add with the
two registers. While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're about to move this out of tcg.h, so rename it
as we did when moving MemOp.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have lacked expressive support for memory sizes larger
than 64-bits for a while. Fixing that requires adjustment
to several points where we used this for array indexing,
and two places that develop -Wswitch warnings after the change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 6eea04347e, all tcg backends support goto_ptr.
Remove the conditional, making support mandatory.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCG_TARGET_HAS_MEMORY_BSWAP is already unset for this backend,
which means that MO_BSWAP be handled by the middle-end and
will never be seen by the backend. Thus the indexes used with
qemu_{ld,st}_helpers will always be zero.
Tidy the comments and asserts in tcg_out_qemu_{ld,st}_direct.
It is not that we do not handle bswap "yet", but never will.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the ifdef ladder and move each define into the
appropriate header file.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the return value to bool, because that's what is should
have been from the start. Pass the ct mask instead of the whole
TCGArgConstraint, as that's the only part that's relevant.
Change the value argument to int64_t. We will need the extra
width for 32-bit hosts wanting to match vector constants.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are two different versions of prototype for tcg_out_op and
tcg_out_vec_op functions:
1) using const TCGArg *args and const int *const_args arguments
2) using const TCGArg args[TCG_MAX_OP_ARGS] and const int
const_args[TCG_MAX_OP_ARGS] aguments.
This duality causes warnings on GCC 11 and prevents build using
--enable-werror. As second version provides more information,
unify functions prototypes to this variant.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Message-Id: <20210312121418.139093-1-mrezanin@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All backends have now been converted to tcg-target-con-set.h,
so we can remove the fallback code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All backends have now been converted to tcg-target-con-str.h,
so we can remove the fallback code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are now completely covered by mov from a
TYPE_CONST temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that all native tcg hosts support splitwx,
make this pointer const.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
