This lets me adjust the clients to do proper error propagation first,
thus avoiding temporary regressions in the quality of the error messages.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some minor typos/grammar errors in comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If TIGHT_PNG is not enabled by the --enable-vnc-png configure flag
then do not report to the client that it is supported.
Also, since TIGHT_PNG is the same as the TIGHT encoding but with the
filter/copy replaced with PNG data, adding it to the supported
encodings list when it is disabled will cause the TIGHT encoding to be
used even though the client requested TIGHT_PNG.
Signed-off-by: Joel Martin <github@martintribe.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* stefanha/trivial-patches:
vnc: fix "info vnc" with "-vnc ..., reverse=on"
sheepdog: use bool for boolean variables
configure: Tidy up remnants of non-64-bit physaddrs
When reverse connection is in use, there is no active VNC server
socket. Because of this, getsockopt(-1, ...) is attempted and
the following error is emitted:
$ socat TCP-LISTEN:5900,reuseaddr TCP-LISTEN:5901,reuseaddr &
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
An undefined error has occurred
Because however the host, family, service and auth fields are
optional, we can just exit if there is no active server socket.
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
Server:
Client:
address: 127.0.0.1:5900
x509_dname: none
username: none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the next qemu version (1.3) we are going to bump the qxl device
revision to 4. The new features available require a recent spice-server
version, so raise up the bar. Otherwise we would end up with different
qxl revisions depending on the spice-server version installed, which
would be a major PITA when it comes to compat properties.
Clear out a big bunch of #ifdefs which are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Don't bother with strncpy. There's no need for its zero-fill.
Use g_strndup in place of g_malloc+strncpy+NUL-terminate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
No need to add non blocking parameters to the blocking inet_connect
add block parameter for inet_connect_opts instead of using QemuOpt "block".
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
The function is called interface_release_resource.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
when creating screen updates go compare the current guest screen
against the mirror (which holds the most recent update sent), then
only create updates for the screen areas which did actually change.
[ v2: drop redundant qemu_spice_create_one_update call ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Creating one function which creates a single update for a given
rectangle. And one (for now) pretty simple wrapper around it to
queue up screen updates for the dirty region.
[ v2: also update bounding box ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.
[ kraxel: 3 continues to be the default revision. Once we have a new
stable spice-server release and the qemu patches to enable
the new bits merged we'll go flip the switch and make rev4
the default ]
This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.
On migration reissue spice_qxl_monitors_config_async.
RHBZ: 770842
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The seamless-migration flag is required in order to identify
whether libvirt supports the new QEVENT_SPICE_MIGRATE_COMPLETED or not
(by default the flag is off).
New libvirt versions that wait for QEVENT_SPICE_MIGRATE_COMPLETED should turn on this flag.
When this flag is off, spice fallbacks to its old migration method, which
can result in data loss.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The flag is 'true' when spice migration has completed on the src side.
It is needed for a case where libvirt dies before migration completes
and it misses the event QEVENT_SPICE_MIGRATE_COMPLETED.
When libvirt is restored and queries the migration status, it also needs
to query spice and check if its migration has completed.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When migrating, libvirt queries the migration status, and upon migration
completions, it closes the migration src. On the other hand, when
migration is completed, spice transfers data from the src to destination
via the client. This data is required for keeping the spice session
after migration, without suffering from data loss and inconsistencies.
In order to allow this data transfer, we add QEVENT for signaling
libvirt that spice migration has completed, and libvirt needs to wait
for this event before quitting the src process.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice server needs to know about the vm state in order to prevent
attempts to write to devices when they are stopped, mainly during
the non-live stage of migration.
Instead, spice will take care of restoring this writes, on the migration
target side, after migration completes.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When parsing its command line parameters, spice aborts when it
finds unexpected values, except for the 'streaming-video' option.
This happens because the parsing of the parameters for this option
is done using the 'name2enum' helper, which does not error out
on unknown values. Using the 'parse_name' helper makes sure we
error out in this case. Looking at git history, the use of
'name2enum' instead of 'parse_name' seems to have been an oversight,
so let's change to that now.
Fixes rhbz#831708
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's used to indicate the special case where a valid file-descriptor
is returned (ie. success) but the connection can't be completed
w/o blocking.
This is needed because QERR_SOCKET_CONNECT_IN_PROGRESS is not
treated like an error and a future commit will drop it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU now has a fundamental requirement for pthreads, so there
is no compelling reason to retain support for the non-threaded
VNC server. Remove the --{enable,disable}-vnc-thread configure
arguments, and all CONFIG_VNC_THREAD conditionals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can't initialize QXLDevSurfaceCreate field by field because it has a
pa hole, and so 4 bytes remain uninitialized when building on x86-64, so
just memset.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
NULL pointer dereference in case no vnc server is configured.
Catch this and return -EINVAL like vnc_display_password() does.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new argument in inet_listen()/inet_listen_opts()
to pass back listen error.
Change nbd, qemu-char, vnc to use new interface.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a bool argument to inet_connect() to assign if set socket
to block/nonblock, and delete original argument 'socktype'
that is unused.
Add a new argument to inet_connect()/inet_connect_opts(),
to pass back connect error by error class.
Retry to connect when -EINTR is got. Connect's successful
for nonblock socket when following errors are got, user
should wait for connecting by select():
-EINPROGRESS
-EWOULDBLOCK (win32)
-WSAEALREADY (win32)
Change nbd, vnc to use new interface.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add mouse_mode, either server or mouse, to qmp and hmp commands, based
on spice_server_is_server_mouse added in spice-server 0.10.3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[blauwirbel@gmail.com: fixed comment style in hw/sun4m.c]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The current intptr_t casts are a problem when the address's highest
bit is 1, and it is cast to a intptr_t and then to uint64_t, such
as at:
surface.mem = (intptr_t)ssd->buf;
This causes the sign bit to be extended which causes a wrong address to
be passed on to spice, which then complains when it gets the wrong
slot_id number, since the slot_id is taken from the higher bits.
The assertion happens early - during the first primary surface creation.
This fixes running "-vga qxl -spice" with 32 bit compiled
qemu-system-i386.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix compilation failures ("cast from pointer to integer of
different size [-Werror=pointer-to-int-cast]") by using
uintptr_t instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* stefanha/trivial-patches:
qemu-ga: for w32, fix leaked handle ov.hEvent in ga_channel_write()
ioapic: fix build with DEBUG_IOAPIC
.gitignore: add qemu-bridge-helper and option rom build products
cleanup obsolete typedef
monitor: Remove unused bool field 'qapi' in mon_cmd_t struct
ds1338: Add missing break statement
vnc: Fix packed boolean struct members
Remove type field in ModuleEntry as it's not used
Commit 1b71f7c14f moved MODULE_INIT_QOM to
way before MODULE_INIT_MACHINE, thereby breaking assumptions made in
spice-core.c which registered both a type initializer and a machine
intializer.
This fix removes the type registration, and replaces it with calling
qemu_spice_init in vl.c after command line parsing (second pass) is
done, and after timers are armed, required by spice server.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes warnings reported by splint:
For variables which are packed in a single bit, a signed data type
like 'int' does not make much sense.
There is no obvious reason why the two values should be packed,
so I removed the packing and changed the data type to bool
because both are used as boolean values.
v2:
Some versions of gcc complain after this modification,
for example gcc (Debian 4.4.5-8) 4.4.5):
ui/vnc-auth-sasl.c: In function ‘vnc_sasl_client_cleanup’:
ui/vnc-auth-sasl.c:34: error: suggest parentheses around assignment used as truth value
Obviously, the compiler does not like code which does
bool = unsigned = bool = 0
Splitting that code in three statements works.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This fixes memory reads and writes which exceeded the upper limit
of allocated memory vd->guest.ds->data and vd->server->data.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The threaded VNC servers messed up with QEMU fd handlers without
any kind of locking, and that can cause some nasty race conditions.
Using qemu_mutex_lock_iothread() won't work because vnc_dpy_cpy(),
which will wait for the current job queue to finish, can be called with
the iothread lock held.
Instead, we now store the data in a temporary buffer, and use a bottom
half to notify the main thread that new data is available.
vnc_[un]lock_ouput() is still needed to access VncState members like
abort, csock or jobs_buffer.
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The comment is wrong, we have to do something in the setdata callback.
Changing the framebuffer backing storage (happens when the guest pans
the display) renders the whole screen content invalid.
Trigger #1: cirrus vga + 32bit linux guest + vesafb with ypan enabled.
Trigger #2: std vga + http://patchwork.ozlabs.org/patch/145479/
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was not a bug, but it is not common practice to omit the break statement
from the last case statement before an empty default case.
Any change of the default case would introduce a bug.
This was reported as a warning by splint.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It's currently possible to setup spice channels using TLS when
no TLS port has been specified (ie TLS is disabled). This cannot
work, so better to error out in such a situation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Error message reporting during spice startup wasn't consistent, it was done
with fprintf(stderr, "") but sometimes the message didn't have a trailing
\n. Using error_report make the intent of the message clearer and deal
with the final \n for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RHBZ# 747011
Removes the last user of QXL_SYNC when using update drivers that use the
_ASYNC io ports.
The last user is qxl_render_update, it is called both by qxl_hw_update
which is the vga_hw_update_ptr passed to graphic_console_init, and by
qxl_hw_screen_dump.
At the same time the QXLRect area being passed to the red_worker thread
is passed as a copy, as part of the QXLCookie.
The implementation uses interface_update_area_complete with a bh to make
sure dpy_update and qxl_flip are called from the io thread, otherwise
the vga->ds->surface.data can change under our feet.
With this patch sdl+spice works fine. But spice by itself doesn't
produce the expected screendumps unless repeated a few times, due to
ppm_save being called before update_area (rendering done in spice server
thread) having a chance to complete. Fixed by next patch, but see commit
message for problem introduced by it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The commit's purpose is laudable:
The only way for chardev drivers to communicate an error was to
return a NULL pointer, which resulted in an error message that
said _that_ something went wrong, but not _why_.
It attempts to achieve it by changing the interface to return 0/-errno
and update qemu_chr_open_opts() to use strerror() to display a more
helpful error message. Unfortunately, it has serious flaws:
1. Backends "socket" and "udp" return bogus error codes, because
qemu_chr_open_socket() and qemu_chr_open_udp() assume that
unix_listen_opts(), unix_connect_opts(), inet_listen_opts(),
inet_connect_opts() and inet_dgram_opts() fail with errno set
appropriately. That assumption is wrong, and the commit turns
unspecific error messages into misleading error messages. For
instance:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: No such file or directory
ENOENT is what happens to be in my errno when the backend returns
-errno. Let's put ERANGE there just for giggles:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx -drive if=none,iops=99999999999999999999
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: Numerical result out of range
Worse: when errno happens to be zero, return -errno erroneously
signals success, and qemu_chr_new_from_opts() dies dereferencing
uninitialized chr. I observe this with "-serial unix:".
2. All qemu_chr_open_opts() knows about the error is an errno error
code. That's simply not enough for a decent message. For instance,
when inet_dgram() can't resolve the parameter host, which errno code
should it use? What if it can't resolve parameter localaddr?
Clue: many backends already report errors in their open methods.
Let's revert the flawed commit along with its dependencies, and fix up
the silent error paths instead.
This reverts commit 6e1db57b2a.
Conflicts:
console.c
hw/baum.c
qemu-char.c
This reverts commit aad04cd024.
The parts of commit db418a0a "Add stdio char device on windows" that
depend on the reverted change fixed up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the acceptance of some new APIs to libspice-server.so it
is possible to add support for SPICE to the 'add_client'
monitor command, bringing parity with VNC. Since SPICE can
use TLS or plain connections, the command also gains a new
'tls' parameter to specify whether TLS should be attempted
on the injected client sockets.
This new feature is only enabled if building against a
libspice-server >= 0.10.1
* qmp-commands.hx: Add 'tls' parameter & missing doc for
'skipauth' parameter
* monitor.c: Wire up SPICE for 'add_client' command
* ui/qemu-spice.h, ui/spice-core.c: Add qemu_spice_display_add_client
API to wire up from monitor
[1] http://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=d55b68b6b44f2499278fa860fb47ff22f5011faahttp://cgit.freedesktop.org/spice/spice/commit/server/spice.h?id=bd07dde530d9504e1cfe7ed5837fc00c26f36716
Changes in v3:
- Added 'optional' flag to new parameters documented
- Added no-op impl of qemu_spice_display_add_client when
SPICE is disabled during build
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently when disabling login in VNC, the password is cleared out and the
authentication protocol is forced to AUTH_VNC. If you're using a stronger
authentication protocol, this has the effect of downgrading your security
protocol.
Fix this by only changing the authentication protocol if the current
authentication protocol is AUTH_NONE. That ensures we're never downgrading.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
--
NB. This patch is derived from one posted by Anthony last year, which got
accidentally lost after Luiz took over the QMP series work
https://lists.gnu.org/archive/html/qemu-devel/2011-09/msg00392.html
v1 -> v2
- Make sure to not demote when changing password (Daniel)
v2 -> v3
- Rebase to latest GIT master wrt QMP changes
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For any modifier key (shift, ctrl, alt) still pressed on disconnect
inject a key-up event into the guest. The vnc client is gone, it will
not do that, so qemu has to do it instead.
Without this keys will get stuck, making the guest act in weird ways
after reconnecting. Reproducer: exit vnc client via Alt-F4, guest
continues to see the pressed alt key and will not react to key events
in any useful way until you tap the alt key once to unstuck it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VNC clients send a shared flag in the client init message. Up to now
qemu completely ignores this. This patch implements shared flag
handling. It comes with three policies: By default qemu behaves as one
would expect: Asking for a exclusive access grants exclusive access to
the client connecting. There is also a desktop sharing mode which
disallows exclusive connects (so one forgetting -shared wouldn't drop
everybody else) and a compatibility mode which mimics the traditional
(but non-conforming) qemu behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the control keys for terminals on the vnc display
(i.e. qemu -vnc :0 -serial vc) work. Makes the terminals
alot more usable as typing Ctrl-C in your serial console
actually has the desired effect ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc assumes that the screen width is a multiple of 16 in several places.
If this is not the case vnc will overrun buffers, corrupt memory, make
qemu crash.
This is the minimum fix for this bug. It makes sure we don't overrun the
scanline, thereby fixing the segfault. The rendering is *not* correct
though, there is a black border at the right side of the screen, 8
pixels wide because 1400 % 16 == 8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are scenarios on Linux with some SDL versions where
handle_activation is continuous invoked with state = SDL_APPINPUTFOCUS
and gain = 0 while we grabbed the input. This causes a ping-pong when we
grab the input after an absolute mouse entered the window.
As this sdl_grab_end was once introduced to work around a Windows-only
issue (0294ffb9c8), limit it to that platform.
CC: Erik Rull <erik.rull@rdsoftware.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
By grabbing the input already on button down, we leave the button in
that state for the host GUI. Thus it takes another click after releasing
the input again to synchronize the mouse button state.
Avoid this by grabbing on button up.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 6bb816031f.
SDL_WM_GrabInput does not reliably bail out if grabbing is impossible.
So if we get here, we already lost and will block. But this can no
longer happen due to the check in sdl_grab_start. So this patch became
obsolete.
Conflicts:
sdl.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Consistently check for SDL_APPINPUTFOCUS before trying to grab the input
focus. Just checking for SDL_APPACTIVE doesn't work. Moving the check to
sdl_grab_start allows for some consolidation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the mouse mode changes to absolute while the SDL windows is not in
focus, refrain from grabbing the input. It would steal from some other
window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop the qerror_report() call from it and let its callers set the error
themselves. This also allows for dropping the 'ret' variable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The no-lock-key-sync option is being parsed incorrectly because of an
outdated strcmp() length value. Use the correct length so that invalid
option names do not match.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Split from Jan's original qemu-thread-posix.c patch. No semantic change,
just introduce the new API that POSIX and Win32 implementations will
conform to.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fixes protocol_client_auth_sasl_mechname() not to crash when malloc()
fails. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Please note that mechlist still uses malloc / strdup / free.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If no disk image is specified, the Cocoa frontend displays a modal sheet
to let the user select an image file to boot from.
This sheet is never closed and it permanently obscures the emulator window.
Close it after obtaining the file name in case the user did select a file.
Otherwise we exit immediately, so no need to close then.
Signed-off-by: Juan Pineda <juan@logician.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
There are three important remarks in relation to the non-qapi command:
1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc'
commands to return an error when qemu is built without VNC support
(ie. --disable-vnc). The non-qapi command would return the OK
response in QMP and no response in HMP
2. The qapi version explicitly marks the fields 'host', 'family',
'service' and 'auth' as optional. Their are not documented as optional
in the non-qapi command doc, but they would not be returned if
vnc support is disabled. The qapi version maintains the same
semantics, but documents those fields correctly
3. The 'clients' field, which is a list, is marked as optional but is
always returned. If there are no clients connected an empty list
is returned. This is not the Right Way to this in the qapi but it's
how the non-qapi command used to work
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Setting both read and write handlers to NULL in qemu_set_fd_handler
is not enougth to make qemu purge the file handle from the list.
We must set opaque to NULL too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No need to use pthread directly, we have proper abstractions for
identity checking.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix "warning: array subscript has type 'char'" on NetBSD.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Avoid using deprecated gnutls functions with recent gnutls versions.
Fixes build failure on Fedora 16. Keep the old way for compatibility
with old installations such as RHEL-5 (gnutls 1.4.x).
Based on a patch from Raghavendra D Prabhu <raghu.prabhu13@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If qxl->ssd.running=true is set after telling spice to start, the spice server
thread can call qxl_send_events while qxl->ssd.running is still false. This leads to
assert(d->ssd.running).
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While in full-screen mode, the input focus naturally belongs to the SDL
window. Avoid dropping it when switching from absolute to relative
mouse mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace width/height globals with the identical values from real_screen,
refactor the function according to our coding style.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to enlarge or shrink the screen via CTRL-ALT-+/-. In contrast to
scaling the window, these controls always preserve the aspect ratio of
the current console.
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not grabbing the input means that special keys like ALT+TAB are still
handled by the host. Improve the usability by grabbing input once the
mouse is inside the guest screen, provided the SDL window has the input
focus. Release it again when the mouse is moved to any border. Also grab
the input when we gain the input focus and the mouse is within the
screen limits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Restore the cursor when switching from graphic to text console while the
mouse is in absolute mode. Disable it again when returning.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's confusing to suddenly find two mice in full screen mode when
switching consoles or accidentally hitting the grab hot keys.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There were some preexisting bits that released the input when switching
to text console. This patch spreads this logic consistently and also
avoids grabbing the input while a text console is active.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This ensures that we actually enter full screen on startup when e.g.
'-vga none -full-screen' was specified.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There must be no difference between initial -full-screen and switching
to this mode via the hot key.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Save the scaling mode and its geometry when going full screen, restore
it when returning to windowed mode.
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When switching to full screen mode from a scaled window, we need to
resize to DisplayState's dimension, not the scaled "real" screen size.
Moreover, scaling mode may have manipulated the bpp. So we need to
restore it from the DisplayState as well.
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This prevents continuous resizing events and improper screen setups when
going full screen.
CC: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just like the monitor does, we need to clear no_shutdown before calling
qemu_system_shutdown_request on quit requests. Otherwise, QEMU just
stops the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some of the QXL port i/o commands are waiting for the spice server to
complete certain actions. Add async versions for these commands, so we
don't block the vcpu while the spice server processses the command.
Instead the qxl device will raise an IRQ when done.
The async command processing relies on an added QXLInterface::async_complete
and added QXLWorker::*_async additions, in spice server qxl >= 3.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
Move the wrapper functions which are used by qxl only to qxl.c.
Rename them from qemu_spice_* to qxl_spice_*. Also pass in a
qxl state pointer instead of a SimpleSpiceDisplay pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Factor out SimpleSpiceDisplay initialization into
qemu_spice_display_init_common() and call it from
both qxl.c (for vga mode) and spice-display.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This allows to pass additional information to the notifier callback
which is useful if sender and receiver do not share any other distinct
data structure.
Will be used first for the clock reset notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The USES_X509_AUTH macro is defined in several VNC files,
but not used in all of them. Remove the unused definition.
* ui/vnc-auth-sasl.c: Remove USES_X509_AUTH macro
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow client connections for VNC and socket based character
devices to be passed in over the monitor using SCM_RIGHTS.
One intended usage scenario is to start QEMU with VNC on a
UNIX domain socket. An unprivileged user which cannot access
the UNIX domain socket, can then connect to QEMU's VNC server
by passing an open FD to libvirt, which passes it onto QEMU.
{ "execute": "get_fd", "arguments": { "fdname": "myclient" } }
{ "return": {} }
{ "execute": "add_client", "arguments": { "protocol": "vnc",
"fdname": "myclient",
"skipauth": true } }
{ "return": {} }
In this case 'protocol' can be 'vnc' or 'spice', or the name
of a character device (eg from -chardev id=XXXX)
The 'skipauth' parameter can be used to skip any configured
VNC authentication scheme, which is useful if the mgmt layer
talking to the monitor has already authenticated the client
in another way.
* console.h: Define 'vnc_display_add_client' method
* monitor.c: Implement 'client_add' command
* qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method
* qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED
* qmp-commands.hx: Declare 'client_add' command
* ui/vnc.c: Implement 'vnc_display_add_client' method
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A future patch will introduce a situation where different
clients may have different authentication schemes set.
When a new client arrives, copy the 'auth' and 'subauth'
fields from VncDisplay into the client's VncState, and
use the latter in all authentication functions.
* ui/vnc.h: Add 'auth' and 'subauth' to VncState
* ui/vnc-auth-sasl.c, ui/vnc-auth-vencrypt.c,
ui/vnc.c: Make auth functions pull auth scheme
from VncState instead of VncDisplay
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The only way for chardev drivers to communicate an error was to return a NULL
pointer, which resulted in an error message that said _that_ something went
wrong, but not _why_.
This patch changes the interface to return 0/-errno and updates
qemu_chr_open_opts to use strerror to display a more helpful error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure at least one port (port=.. or tls-port=...)
is specified. Also apply range checks to the port numbers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes a problem where on windows 7 startup phase, before the qxl driver
is loaded, the drawables are sufficiently large and video like to trigger a
stream, but the lack of a filled mm time field triggers a warning in spice-gtk.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit f26e428da5 fixed compilation
with --enable-vnc-png, but broke it with --enable-vnc-png.
The breakage is caused by pngconfig.h which checks whether
setjmp.h was already included and fails because qemu-common.h
includes setjmp.h.
The check is disabled by defining PNG_SKIP_SETJMP_CHECK.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix conflicting types for 'INT32' in basetsd.h and jmorecfg.h by
including qemu-common.h first.
Signed-off-by: Roy Tam <roytam@gmail.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid compiler confusion as to which method signature to use for the
handleEvent: selector on OSX >= 10.6 by making the variable type-safe
as opposed to generic 'id' type.
Requires moving the variable definition to after the class definition.
----8<----
ui/cocoa.m: In function ‘cocoa_refresh’:
ui/cocoa.m:997: warning: multiple methods named ‘-handleEvent:’ found
/System/Library/Frameworks/AppKit.framework/Headers/NSTextInputContext.h:84: warning: using ‘-(BOOL)handleEvent:(NSEvent *)theEvent’
ui/cocoa.m:272: warning: also found ‘-(void)handleEvent:(NSEvent *)event’
----8<---
Reported-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Alexandre Raymond <cerbere@gmail.com>
This fixes a missing prototype warning in vl.c and obsoletes
the prototype in cocoa.m. Adjust callers in cocoa.m to supply
third argument, which is currently only used on Linux/ppc.
The prototype is designed so that it could be shared with SDL
and other frontends, if desired.
Cc: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
There was already a check in place to avoid displaying a window
in certain modes such as vnc, nographic or curses.
Add a check for '-h' and '-help' to avoid displaying a window for a split-
second before showing the usage information.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
When invoked with -version, qemu will exit just after displaying the version,
so there is no need to create a window.
Also handles --XXX options.
Signed-off-by: Tristan Gingold <gingold@adacore.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch raises the minimum required spice version to 0.6.0 and drops
a few ifdefs.
0.6.0 is the first stable release with the current libspice-server API,
there shouldn't be any 0.5.x development versions deployed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Turn on SASL support by appending "sasl" to the spice arguments, which
requires that the client use SASL to authenticate with the spice. The
exact choice of authentication method used is controlled from the
system / user's SASL configuration file for the 'qemu' service. This
is typically found in /etc/sasl2/qemu.conf. If running QEMU as an
unprivileged user, an environment variable SASL_CONF_PATH can be used
to make it search alternate locations for the service config. While
some SASL auth methods can also provide data encryption (eg GSSAPI),
it is recommended that SASL always be combined with the 'tls' and
'x509' settings to enable use of SSL and server certificates. This
ensures a data encryption preventing compromise of authentication
credentials.
It requires support from spice 0.8.1.
[ kraxel: moved spell fix to separate commit ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some people want to be able disable spice's guest <-> client copy paste support
because of security considerations.
[ kraxel: drop old-version error message ]
We don't use qemu internals from spice server context any more.
Thus we don't also need to grab the iothread mutex from spice
server context. And we don't have to temporarely release the
lock to avoid deadlocks. Drop all the calls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch moves the displaystate callback calls for setting the cursor
and the mouse pointer from spice server to qemu (iothread) context.
This allows us to simplify locking.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch moves the creation of spice screen updates from the spice
server context to qemu iothread context (display refresh timer to be
exact). This way we avoid accessing qemu internals (display surface)
from spice thread context which in turn allows us to simplify locking.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu_spice_set_passwd() and qemu_spice_set_pw_expire() dummy functions
needs to be inline, in order to handle the case where they are called
without checking the return value.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fix 2Gb integer overflow in in VNC tight and zlib encodings
As found by Roland Dreier <roland@purestorage.com> (excellent
catch!), when amount of VNC compressed data produced by zlib
and sent to client exceeds 2Gb, integer overflow occurs because
currently, we calculate amount of data produced at each step by
comparing saved total_out with new total_out, and total_out is
something which grows without bounds. Compare it with previous
avail_out instead of total_out, and leave total_out alone.
The same code is used in vnc-enc-tight.c and vnc-enc-zlib.c,
so fix both cases.
There, there's no actual need to save previous_out value, since
capacity-offset (which is how that value is calculated) stays
the same so it can be recalculated again after call to deflate(),
but whole thing becomes less readable this way.
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are no { name, keysym } values in name2keysym[] array for Polish
national characters so "-k pl" option has no effect.
Signed-off-by: Leszek Grzegorek <leszek.grzegorek@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Load an optional QEMU icon file. If there is no icon file named
qemu.bmp in QEMU's default search path, QEMU will run with
the usual system default icon.
A matching icon file will be loaded and used by X Windows managers
or MS Windows while a QEMU instance is running.
SDL requires icon files in 32x32x4 bmp format.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The following commit breaks the code of the function palette_destroy().
http://git.kernel.org/?p=virt/kvm/qemu-kvm.git;a=commit;h=e31e3694afef58ba191cbcc6875ec243e5971268
The broken code causes a severe memory leak of 'VncPalette' structures
because it never frees anything:
70 void palette_destroy(VncPalette *palette)
71 {
72 if (palette == NULL) {
73 qemu_free(palette);
74 }
75 }
Version 2 of the patch calls qemu_free() unconditionally.
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fix the following regression:
1. we should use bitmap_set() and bitmap_clear() to replace vnc_set_bits().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This removes various code duplication from console.e and sdl.c
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done with:
sed -i '/get_clock\>.*rt_clock/s/get_clock\>/get_clock_ms/' \
$(git grep -l 'get_clock\>.*rt_clock' )
sed -i '/new_timer\>.*rt_clock/s/new_timer\>/new_timer_ms/' \
$(git grep -l 'new_timer\>.*rt_clock' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have qemu_cpu_self and qemu_thread_self. The latter is retrieving the
current thread, the former is checking for equality (using CPUState). We
also have qemu_thread_equal which is only used like qemu_cpu_self.
This refactors the interfaces, creating qemu_cpu_is_self and
qemu_thread_is_self as well ass qemu_thread_get_self.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit bc2429b917 introduced
a severe bug (stack corruption).
bitmap_clear was called with a wrong argument
which caused out-of-bound writes to the local variable width_mask.
This bug was detected with QEMU running on windows.
It also occurs with wine:
*** stack smashing detected ***: terminated
wine: Unhandled illegal instruction at address 0x6115c7 (thread 0009), starting debugger...
The bug is not windows specific!
Instead of fixing the wrong parameter value, bitmap_clear(), bitmap_set
and width_mask were removed, and bitmap_intersect() was replaced by
!bitmap_empty(). The new operation is much shorter and equivalent to
the old operations.
The declarations of the dirty bitmaps in vnc.h were also wrong for 64 bit
hosts because of a rounding effect: for these hosts, VNC_MAX_WIDTH is no
longer a multiple of (16 * BITS_PER_LONG), so the rounded value of
VNC_DIRTY_WORDS was too small.
Fix both declarations by using the macro which is designed for this
purpose.
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Gerhard Wiesinger <lists@wiesinger.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
VncJobQueue's buffer is intended to be used for
as the output buffer for all operations in this queue,
but unfortunatly.
vnc_async_encoding_start() is in charge of setting this
buffer as the current output buffer, but
vnc_async_encoding_end() was not writting the changes back
to VncJobQueue, resulting in a big and ugly memleak.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add some missing #ifdefs to fix compilation failures in the !CONFIG_VNC_JPEG
case introduced by commit ce702e93.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Reverse mode is unusable:
qemu -vnc localhost:5500,reverse
crashes in vnc_refresh_server_surface because some pointers are NULL.
Fix this by calling vnc_dpy_resize (which initializes these pointers)
before calling vnc_refresh.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This option allow to disable adaptive behaviors in some encodings.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Respect client size if it doesn't not support desktop resizing.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Switch to bitmap.h and bitops.h instead of redefining our own bitmap
helpers.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The for loop in send_lossy_rect was totally wrong, and we can't
call vnc_set_bits() because it does not really do what it should.
Use vnc_set_bit() directly instead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These two helpers are needed for zrle and zywrle.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allow to use palette on the stack instead of always
allocating them.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We now that the palette will never have more than 256
elements. Let's use a pool to reduce malloc calls.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use the new update frequency infrastructure to use jpeg for regions with
high update frequency.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If an adaptive encoding has choosen to send a lossy update
based on the result of vnc_update_freq(), then it should advertise
it with vnc_sent_lossy_rect(). This will allow to automatically refresh
this rect once it's static again.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch compute the update frequency (in Hz) for each 64x64 rects.
Any adaptive encoding can get this value using vnc_update_freq(), and
switch to a lossy encoding if the value is too high.
The frequency is pre-calculated every 500ms, based on the last 10
updates per 64x64 rect.
If a 64x64 rect was not updated in the last 2 second, then the frequency
became 0, and all the stored timestamp are reseted.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should not change the current behavior, but if any new
encoding try to use the tight quality, it will always be set
to -1 when lossy encodings are disabled.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
agraf reported that qemu_mutex_destroy(vs->output_mutex) while failing
in vnc_disconnect_finish().
It's because vnc_worker_thread_loop() tries to unlock the mutex while
not locked. The unlocking call doesn't fail (pthread bug ?), but
the destroy call does.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Starting with SDL version 1.2.14, caps lock and num lock keys
will send a SDL_KEYUP when SDL_DISABLE_LOCK_KEYS=1 is set in
the environment.
The new code sets the environment unconditionally
(it won't harm old versions which do not know it).
The workaround for SDL_KEYUP is only compiled with old SDL versions.
A similar patch without handling of old SDL versions was already
published by Benjamin Drung for Ubuntu.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Benjamin Drung <benjamin.drung@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 52c18be9e9 introduced a regression in the
change vnc password command that changed the behavior of setting the VNC
password to an empty string from disabling login to disabling authentication.
This commit refactors the code to eliminate this overloaded semantics in
vnc_display_password and instead introduces the vnc_display_disable_login. The
monitor implementation then determines the behavior of an empty or missing
string.
Recently, a set_password command was added that allows both the Spice and VNC
password to be set. This command has not shown up in a release yet so the
behavior is not yet defined.
This patch proposes that an empty password be treated as an empty password with
no special handling. For specifically disabling login, I believe a new command
should be introduced instead of overloading semantics.
I'm not sure how Spice handles this but I would recommend that we have Spice
and VNC have consistent semantics here for the 0.14.0 release.
Reported-by: Neil Wilson <neil@aldur.co.uk>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Add a proper return to make sure that login is really disabled instead of
relying on the VNC server to treat empty passwords specially
Variable rec is not used, remove it. Spotted by GCC 4.6.0:
CC ui/sdl.o
/src/qemu/ui/sdl.c: In function 'sdl_setdata':
/src/qemu/ui/sdl.c:90:14: error: variable 'rec' set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes the numlock+capslock tracking logic only look at
keydown events. Without this patch the vnc server will insert
bogous capslock keypress in case it sees the following key sequence:
shift down --- 'A' down --- shift up --- 'A' up
^ here
It doesn't hurt with a PS/2 keyboard, but it disturbs the USB Keyboard.
And with the key event queue just added to the usb keyboard the guest
will actually notice.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Handle spice client migration, i.e. inform a spice client connected
about the new host and connection parameters, so it can move over the
connection automatically.
The monitor command has a not-yet used protocol argument simliar to
set_password and expire_password commands. This allows to add a simliar
feature to vnc in the future. Daniel Berrange plans to work on this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds new set_password and expire_password monitor commands
which allows to change and expire the password for spice and vnc
connections. See the doc update patch chunk for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for expiring passwords to vnc. It adds a new
vnc_display_pw_expire() function which specifies the time when the
password will expire.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
protocol_client_auth_vnc() has two places where the auth can fail,
with identical code sending the reject message to the client.
Move the common code to the end of the function and make both
error paths jump there. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The patch adds a 'query-spice' monitor command which returns
informations about the spice server configuration and also a list of
channel connections.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for connection events to spice. The events are
quite simliar to the vnc events. Unlike vnc spice uses multiple tcp
channels though. qemu will report every single tcp connection (aka
spice channel). If you want track spice sessions only you can filter
for the main channel (channel-type == 1).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for the spice audio interface. With this patch applied
audio can be forwarded over the network from/to the spice client. Both
recording and playback is supported.
The driver is first in the driver list, but the can_be_default flag is
set only in case spice is active. So if you have the spice protocol
enabled the spice audio driver is the default one, otherwise whatever
comes first after spice in the list. Overriding the default using
QEMU_AUDIO_DRV works in any case.
[ v2: audio codestyle: add spaces before open parenthesis ]
[ v2: add const to silence array ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: malc <av1474@comtv.ru>
Signed-off-by: malc <av1474@comtv.ru>
qemu_spice_create_update() must aquire the global qemu mutex to
make sure DisplayState doesn't change while we are accessing it.
Once this is in place the private lock is pretty pointless as
everything it protects is covered by the global qemu mutex now.
Drop it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace the remaining format attribute printf by macro
GCC_FMT_ATTR which uses gnu_printf (if supported).
v2
* Removal of dyngen specific code is now done in a separate patch.
* Handle attribute in new ui/spice-display.c, too.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
control-{@[\]^_} shouldn't get the 'a' - 'A' offset for correct
translation. ESC is better simulated as escape key.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Andrew Zaborowski <balrogg@gmail.com>
Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/ui/vnc.c: In function 'vnc_client_cache_auth':
/src/qemu/ui/vnc.c:217:12: error: variable 'qdict' set but not used [-Werror=unused-but-set-variable]
/src/qemu/ui/vnc.c: In function 'vnc_display_open':
/src/qemu/ui/vnc.c:2526:9: error: variable 'acl' set but not used [-Werror=unused-but-set-variable]
Fix by making the variable declarations and their uses also conditional
to debug definition.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add support for the spice tablet interface. The tablet interface will
be registered (and then used by the spice client) as soon as a absolute
pointing device is available and used by the guest, i.e. you'll have to
configure your guest with '-usbdevice tablet'.
With that patch applied you'll actually see the guests screen in the
spice client. This does *not* bring qxl and full spice support though.
This is basically the qxl vga mode made more generic, so it plays
together with any qemu-emulated gfx card. You can display stdvga or
cirrus via spice client. You can have both vnc and spice enabled and
clients connected at the same time.
Open keyboard channel. Now you can type into the spice client and the
keyboard events are sent to your guest. You'll need some other display
like vnc to actually see the guest responding to them though.
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
bswap_NN() variants are not always available in CONFIG_MACHINE_BSWAP_H case
and bswapNN() are public APIs in "bswap.h".
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Setting fd = -1 to qemu_set_fd_handler2() causes bus error at FD_SET
in main_loop_wait().
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
configure adds the macro WIN32_LEAN_AND_MEAN to
QEMU_CFLAGS, and SDL_syswm.h defines it, too.
This results in a compiler warning (redefinition of
WIN32_LEAN_AND_MEAN in SDL_syswm.h. That warning prevents
compilations for win32 with warning = error).
Fix this by removing the definition of WIN32_LEAN_AND_MEAN
before including SDL_syswm.h.
[blauwirbel@gmail.com: rebased]
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit d167f9bc06 missed this one:
/src/qemu/ui/vnc-enc-tight.c:1483: warning: 'ret' may be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Commit 7bccf57383 missed this one:
/src/qemu/ui/vnc-enc-tight.c: In function 'send_sub_rect':
/src/qemu/ui/vnc-enc-tight.c:1527: warning: comparison is always true due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix mingw32 build errors like
/src/qemu/ui/vnc-enc-tight.c: In function 'tight_detect_smooth_image24':
/src/qemu/ui/vnc-enc-tight.c:119: error: 'uint' undeclared (first use in this function)
Replace 'uint' with proper 'unsigned int'.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a warning with some GCCs:
/src/qemu/ui/vnc-enc-tight.c: In function `send_sub_rect_nojpeg':
/src/qemu/ui/vnc-enc-tight.c:1458: warning: `ret' might be used uninitialized in this function
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix the following warnings:
/src/qemu/hw/ide/core.c: In function `ide_drive_pio_post_load':
/src/qemu/hw/ide/core.c:2767: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_detect_smooth_image':
/src/qemu/ui/vnc-enc-tight.c:284: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c:297: warning: comparison is always true due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect16':
/src/qemu/ui/vnc-enc-tight.c:456: warning: comparison is always false due to limited range of data type
/src/qemu/ui/vnc-enc-tight.c: In function `tight_encode_indexed_rect32':
/src/qemu/ui/vnc-enc-tight.c:457: warning: comparison is always false due to limited range of data type
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split send_sub_rect in send_sub_rect_jpeg and send_sub_rect_nojpeg to
remove all these #ifdef CONFIG_JPEG.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rgb_prepare_row bpp depends on the server display surface, not
the client.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All vnc_write() calls must be locked (except the ones present before
the protocol initialization).
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement a threaded VNC server using the producer-consumer model.
The main thread will push encoding jobs (a list a rectangles to update)
in a queue, and the VNC worker thread will consume that queue and send
framebuffer updates to the output buffer.
The threaded VNC server can be enabled with ./configure --enable-vnc-thread.
If you don't want it, just use ./configure --disable-vnc-thread and a syncrhonous
queue of job will be used (which as exactly the same behavior as the old queue).
If you disable the VNC thread, all thread related code will not be built and there will
be no overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow to implement the threaded VNC server in a
more cleaner way.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Profiling with callgrind seems to show that a lot of time is spent
in the palette code (mostly due to memory allocation and qdict to int
conversion).
This patch adds a VncPalette implementation. The palette is stored
in a hash table, like qdict, but which does way less memory allocations,
and doesn't suffer from the QObject overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Disable png filters for lower compression levels. This should lower
the CPU consumption and reduce encoding time.
This isn't in tight_conf because:
* tight_conf structure must not change, because it's shared with other
tight implementations (libvncserver, etc..).
* it'd exceed the 80 col limit.
* PNG_ macros are only defined if CONFIG_VNC_PNG is defined
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a new encoding: VNC_ENCODING_TIGHT_PNG [1] (-269) with a new
tight filter VNC_TIGHT_PNG (0x0A). When the client tells it supports the Tight PNG
encoding, the server will use tight, but will always send encoding pixels using
PNG instead of zlib. If the client also told it support JPEG, then the server can
send JPEG, because PNG will only be used in the cases zlib was used in normal tight.
This encoding was introduced to speed up HTML5 based VNC clients like noVNC [2], but
can also be used on devices like iPhone where PNG can be rendered in hardware.
[1] http://wiki.qemu.org/VNC_Tight_PNG
[2] http://github.com/kanaka/noVNC/
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While using indexed colors, the last color was never added to the palette.
Triggered with ubuntu livecd.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the same reason that we don't use vnc-authentication-sasl.c but
vnc-auth-sals.c. Because it's tooooo long.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move sdl, vnc, curses and cocoa UI into ui/ to cleanup
the root directory. Also remove some unnecessary explicit
targets from Makefile.
aliguori: fix build when srcdir != objdir
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini
Peter Maydell
Joel Martin
Anthony Liguori
Gerd Hoffmann
Aurelien Jarno
Amos Kong
Jim Meyering
Stefan Weil
Orit Wasserman
Alon Levy
Yonit Halperin
Christophe Fergeau
Luiz Capitulino
Paul Moore
Blue Swirl
Daniel P. Berrange
Andreas Färber
Marc-André Lureau
Stefan Weil
Corentin Chary
Markus Armbruster
Andreas Färber
Jan Kiszka
Stefan Hajnoczi
Dong Xu Wang
Juan Quintela
Christoph Egger
Kevin Wolf
Roy Tam
Alexandre Raymond
Tristan Gingold
Hans de Goede
Michael Tokarev
Jes Sorensen
Leszek Grzegorek
Ulrich Obergfell
Wen Congyang
Corentin Chary
Samuel Thibault
Izumi Tsutsui
Serge Ziryukin
Yoshiaki Tamura