PAPR systems support several hypercalls intended for use in real mode
debugging tools. These implement reads and writes to arbitrary guest
physical addresses. This is useful for real mode software because it
allows access to IO addresses and memory outside the RMA without going
through the somewhat involved process of setting up the hash page table
and enabling translation.
We want these so that when we add real IO devices, the SLOF firmware can
boot from them without having to enter virtual mode.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently our implementation of the H_ENTER hypercall, which inserts a
mapping in the hash page table assumes that only ordinary memory is ever
mapped, and only permits mapping attribute bits accordingly (WIMG==0010).
However, we intend to start adding emulated IO to the pseries platform
(and real IO with PCI passthrough on kvm) which means this simple test
will no longer suffice.
This patch extends the h_enter validation code to check if the given
address is a RAM address. If it is it enforces WIMG==0010, otherwise
it assumes that it is an IO mapping and instead enforces WIMG=010x.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The interrupt controller presented in the device tree for the pseries
machine is manipulated by the guest only through hypervisor calls. It
has no real or emulated registers for the guest to access.
However, it currently has a bogus 'reg' property advertising a register
window. Moreover, this property has an invalid format, being a 32-bit
zero, when the #address-cells property on the root bus indicates that it
needs a 64-bit address. Since the guest never attempts to manipulate
the node directly, it works, but it is ugly and can cause warnings when
manipulating the device tree in other tools (such as future firmware
versions).
This patch, therefore, corrects the problem by entirely removing the
interrupt-controller node's 'reg' property.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Future devices we will be adding to the pseries machine (e.g. PCI) will
need nodes in the device tree which explicitly reference the top-level
interrupt controller via interrupt-parent or interrupt-map properties.
In order to do this, the interrupt controller node needs an assigned
phandle. This patch adds the appropriate property, in preparation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The implementation of the XICS interrupt controller contains several
(difficult to trigger) bugs due to the fact that we were not 100%
consistent with which irq numbering we used. In most places, global
numbers were used as handled by the presentation layer, however a few
functions took "local" numberings, that is the source number within
the interrupt source controller which is offset from the global
number. In most cases the function and its caller agreed on this, but
in a few cases it didn't.
This patch cleans this up by always using global numbering.
Translation to the local number is now always and only done when we
look up the individual interrupt source state structure. This should
remove the existing bugs and with luck reduce the chances of
re-introducing such bugs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
One of the things we can't fake on PPC is the timer speed. So
we need to extract the frequency information from the host and
put it back into the guest device tree.
Luckily, we already have functions for that from the non-pseries
targets, so all we need to do is to connect the dots and the guest
suddenly gets to know its real timer speeds.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running PR style KVM, we need to tell the kernel that we want
to run in PAPR mode now. This means that we need to pass some more
register information down and enable papr mode. We also need to align
the HTAB to htab_size boundary.
Using this patch, -M pseries works with kvm even on non-hv kvm
implementations, as long as the preceding kernel patches are in.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- match on CONFIG_PSERIES
v2 -> v3:
- remove HIOR pieces from PAPR patch (ABI breakage)
Now that we have everything in place, make the machine description
aware of the fact that we can now handle 15 virtual CPUs!
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Max cpus is 15 because of MPIC
With this patch, we generate CPU nodes in the machine initialization, giving
us the freedom to generate as many nodes as we want and as the machine supports,
but only those.
This is a first step towards a much cleaner device tree generation
infrastructure, where we would not require precompiled dtb blobs anymore.
Signed-off-by: Alexander Graf <agraf@suse.de>
The guest OS wants to know where the guest spins, so let's tell him while
updating the CPU nodes with the frequencies anyways.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- use new spin table address
CPUs that are not the boot CPU need to run in spinning code to check if they
should run off to execute and if so where to jump to. This usually happens
by leaving secondary CPUs looping and checking if some variable in memory
changed.
In an environment like Qemu however we can be more clever. We can just export
the spin table the primary CPU modifies as MMIO region that would event based
wake up the respective secondary CPUs. That saves us quite some cycles while
the secondary CPUs are not up yet.
So this patch adds a PV device that simply exports the spinning table into the
guest and thus allows the primary CPU to wake up secondary ones.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- change into MMIO scheme
- map the secondary NIP instead of 0 1:1
- only map 64MB for TLB, same as u-boot
- prepare code for 64-bit spinnings
v2 -> v3:
- remove r6
- set MAS2_M
- map EA 0
- use second TLB1 entry
v3 -> v4:
- change to memoryops
v4 -> v5:
- fix endianness bugs
v5 -> v6:
- add header
We should only keep CPU nodes in the device tree around that we really have
virtual CPUs for. So remove all superfluous entries that we just keep there
in case someone wants to create a lot of vCPUs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can so nicely find out the host's frequencies, we should also
make sure that we get them into all virtual CPUs' device tree nodes.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have nice and shiny APIs to read out the host's clock and timebase
frequencies, let's use them in the bamboo code as well!
Signed-off-by: Alexander Graf <agraf@suse.de>
We don't need mpc8544_copy_soc_cell anymore, since we're explicitly reading
host values and writing guest values respectively.
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have generic KVM functions to read out the host tb and clock
frequencies, let's use them in the e500 code!
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we can generate multiple envs for all our virtual CPUs, we
also need to tell the MPIC that we have multiple CPUs connected and
connect them all to the respective virtual interrupt lines.
Signed-off-by: Alexander Graf <agraf@suse.de>
When creating a VM, we should go through smp_cpus and create a virtual CPU for
every CPU the user requested. This patch adds support for that and moves some
code around to make that more convenient.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC emulation is now capable of handling up to 32 CPUs. Reflect that in
the code exporting the numbers out and fix an integer overflow while at it.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Max cpus is 15 due to cINT routing
- Report nb_cpus not MAX_CPUS in MPIC capabilities
The bit definitions for critical interrupt routing are in PowerPC order
(most significant bit is 0), while we end up shifting it with normal bit
order. Turn the numbers around so we actually end up fetching the
right ones.
Signed-off-by: Alexander Graf <agraf@suse.de>
The IPI dispatch registers are write only according to every MPIC
spec I have found. So instead of pretending you could read back something
from them, better not handle them at all.
Reported-by: Elie Richa <richa@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We use the IDE register with IPIs as a mask to keep track which processors
have already acknowledged the respective interrupt. So we need to initialize
it to 0 to make sure that it doesn't accidently fire an IPI on CPU0 when the
first IPI is triggered.
Reported-by: Elie Richa <richa@adacore.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v2 -> v3:
- fix IDE IPI reset
The current IPI support in the MPIC code is incomplete and doesn't work. This
code adds proper support for IPIs in MPIC by using the IDE register to remember
which CPUs IPIs are still outstanding to. New triggers through the IPI trigger
register only add to the list of CPUs we want to IPI.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- Use MAX_IPI instead of hardcoded 4
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC exports a page for each CPU that it controls. To support more than
one CPU, we need to also reserve the MMIO space according to the amount of
CPUs we want to support.
Signed-off-by: Alexander Graf <agraf@suse.de>
The MPIC exports a register set for each CPU connected to it. They can all
be accessed through specific registers or using a shadow page that is mapped
differently depending on which CPU accesses it.
This patch implements the shadow map, making it possible for guests to access
the CPU local registers using the same address on each CPU.
Signed-off-by: Alexander Graf <agraf@suse.de>
This also lets the user see the irq in "info qtree".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Restructure common properties for sPAPR devices so that IRQ definitions
can be added in one place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now the spapr devices cannot be instantiated with -device,
because the IRQs need to be passed to the spapr_*_create functions.
Do this instead in the bus's init wrapper.
This is particularly important with the conversion from scsi-disk
to scsi-{cd,hd} that Markus made. After his patches, if you
specify a scsi-cd device attached to an if=none drive, the default
VSCSI controller will not be created and, without qdevification,
you will not be able to add yours.
NOTE from agraf: added small compile fix
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The commit fc2bf44972
removed ISD_handle field from struct GT64120State,
so remove the field from DPRINTF too.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The commit fc2bf44972
changed the type of val argument of the function gt64120_writel()
from uint32_t to uint64_t, so we need to change the corresponding
length modifier from "%x" to "%" PRIx64.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch converts mpic to the new memory API (through old mmio).
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove the get_system_memory() call from serial_mm_init, pushing
it back into the callers. In many cases we already have the
system memory region available.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The use of DEVICE_NATIVE_ENDIAN cleans up lots of ifdefs in
many of the callers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
We are mapping ESCC to a static (incorrect) address on machine init. This
overlaps with our vram, rendering the screen barely usable.
Since openBIOS is clever enough to map ESCC to where it needs to be, we can
just drop that invalid map and everyone's happy.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Missed during memory region conversion: The i8259 now depends on the ISA
bus being created first. Reorder the initialization.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This requires some amount of hoop-jumping, so that we don't
inadvertently claim port 0x3f6, which is used by ISA IDE.
The sysbus initialization path is as yet unconverted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Slightly non-obvious with mips_jazz passing in the region
structure to populate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
The only non-obvious part is pic_poll_read which used
"addr1 >> 7" to detect whether one referred to either
the master or slave PIC. Instead, test this directly.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
i8259 is an ISA device (or at least, depends on the ISA infrastructure to
register its ioport); and the ISA bus is supplied by piix4. Later patches
make this dependency explicit.
Use qemu_irq_proxy() to stop the cycle by adding an extra layer of
indirection.
Signed-off-by: Avi Kivity <avi@redhat.com>
In particular, the i8259 was being initialized before the ISA bus,
leading to a crash.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
To replace isa_init_ioport and isa_init_ioport_range
as the ISA devices are converted to the memory api.
[avi: use memory_region_size()]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Not used yet, but at least we're provided with the correct region.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Returns the I/O address space. Useful for implementing
PCI-ISA bridge devices.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
In some cases we have a circular dependency involving irqs - the irq
controller depends on a bus, which in turn depends on the irq controller.
Add qemu_irq_proxy() which acts as a passthrough, except that the target
irq may be set later on.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The virtio code uses wmb() macros in several places, as required by the
SMP-aware virtio protocol. However the wmb() macro is locally defined
to be a compiler barrier only. This is probably sufficient on x86
due to its strong storage ordering model, but it certainly isn't on other
platforms, such as ppc.
In any case, qemu already has some globally defined memory barrier macros
in qemu-barrier.h. This patch, therefore converts virtio.c to use those
barrier macros. The macros in qemu-barrier.h are also wrong (or at least,
safe for x86 only) but this way at least there's only one place to fix
them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Need to check that guest slot/device number is not > 31 or walk off
the devfn table when checking if a devfn is available or not in a guest.
before this fix, passing in an addr=abc or addr=34,
can crash qemu, sometimes fail gracefully if data past end
of devfn table fails the availability test.
with this fix, get clean error:
Property 'pci-assign.addr' doesn't take value '34'
also tested when no addr= param passed for guest (pcicfg) address,
and that worked as well.
Signed-off-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Do not try to map against the PCI bar in the ISA version of the device.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to initialize legacy_address_space during ISA VGA setup so that
the chain-4 alias can be registered properly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is based on the original fix by Hervé Poussineau: pc_memory_init
actually takes a memory region for mapping BIOS and extension ROMs. That
equals the PCI memory region if PCI is available, but must be system
memory in the ISA case.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[Originally sent to qemu-kvm list, but I was redirected here]
The Capabilities Pointer is NULL, so this bit shouldn't be set. The state of
this bit doesn't appear to change any behavior on Linux/Windows versions we've
tested, but it does cause Windows' PCI/PCI Express Compliance Test to balk.
I happen to have a physical 82540EM controller, and it also sets the
Capabilities Bit, but it actually has items on the capabilities list to go
with it :)
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Wire up the OMAP1 GPIO clock -- this fixes a hw_error() on startup
with OMAP1 based machines (sx1, cheetah).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the omap_intc devices to qdev. This includes adding
a 'revision' property which will be needed for omap3.
The bulk of this patch is the replacement of "s->irq[x][y]"
with "qdev_get_gpio_in(s->ih[x], y)" now that the interrupt
controller exposes its input lines as qdev gpio inputs.
The devices are named "omap-intc" and "omap2-intc", following
the filename and the OMAP2/3 hardware names, although some
internal functions are still named "omap_inth_*".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writing to IRQSTATUS should affect irqst, not irqen -- error
spotted by Andrzej Zaborowski.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Promote the remark about why we handle FIFOTHRESHOLDSTATUS the
way we do from the commit message of de8af7fe0 to a comment in
the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add a new context flag PATHNAME_FSCONTEXT and indicate whether
the fs driver track fid using path names. Also add a private
pointer that help us to track fs driver specific values in there
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This enables us to add handles to track fids later. The
V9fsPath added is similar to V9fsString except that the
size include the NULL byte also.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
On rename we take the write lock and this ensure path
doesn't change as we operate on them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Implement an I/O space index-data register pair as defined by the AHCI
spec, including the corresponding SATA PCI capability and BAR.
This allows real-mode code to access the AHCI registers; real-mode
code cannot address the memory-mapped register space because it is
beyond the first megabyte.
Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a trivial wrapper for soc_dma_port_add_mem(), which makes
the memory API conversion more difficult because it takes a ram
addr_t. Drop.
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
When assigning a 32-bit value to cmd->xfer (which is 64-bits)
it can be erroneously sign extended because the intermediate
32-bit computation is signed. Fix this by standardizing on
the ld*_be_p functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware
emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I
see, it clears port's Interrupt Enable register each time when reset of
any level happens. Is is reasonable for the global controller reset. It
is probably not good, but acceptable for FreeBSD driver for the port
hard reset. But it is IMO wrong for the device soft reset. None of real
hardware I know behaves that way.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It will not be needed for reads and writes if the HBA provides a sglist.
In addition, this lets scsi-disk refuse commands with an excessive
allocation length, as well as limit memory on usual well-behaved guests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also, consistently use qiov.size instead of iov.iov_len.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Support bridge filtering on top of the memory
API as suggested by Avi Kivity:
Create a memory region for the bridge's address space. This region is
not directly added to system_memory or its descendants. Devices under
the bridge see this region as its pci_address_space(). The region is
as large as the entire address space - it does not take into account
any windows.
For each of the three windows (pref, non-pref, vga), create an alias
with the appropriate start and size. Map the alias into the bridge's
parent's pci_address_space(), as subregions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The switch to the new memory API caused the following problem:
The pci device may call pci_register_bar() to use PCI bus's address
space. But we don't init PCI bus's address space if it is not bus
0. A crash was reported:
http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg02243.html
More work will be needed to make bridge filtering work correctly
with the memory API.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix up some erroneous comments in code:
interrupt pins are named A-D, the
interrupt pin register is always readonly
and isn't zeroed out on reset.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
eepro100 was the last user. Now pci_add_capability is powerful enough.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I found no rationale for this in the logs, and it is quite bad because
it will make scsi-generic unsafe WRT power failures.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we use memory API in sun4u.c, after
71579cae30, setting up isa_mem_base
puts vga.chain4 outside of the physical address space.
Fix by removing obsolete isa_mem_base set up.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The virtio device lifecycle can be observed by looking at the sequence
of set status operations. This is especially important for catching the
reset operation (status value 0), which resets the device and all
virtqueues.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make qdev_device_help print both device and bus properties.
Helps libvirt to figure whenever bus properties such as
PCI.multifunction are supported present or not.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This does not yet unbreak PPC (which has its own problems) but
potentially other non-x86 systems where isa_mem_base is != 0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix a number of bugs in the implementation of writes to the CM_CTRL
system register:
* write to cm_ctrl, not cm_init !
* an '&' vs '^' typo meant we would write the inverse of the bits
* handling the LED via printf() meant we spew lots of output
to stdout when Linux uses the LED as a heartbeat indicator
* we would hw_error() if a reset was requested rather than
actually resetting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In text mode, even a full refresh of the screen takes multiple updates.
As we reset the dump file pointer after the first call, we only wrote
the first line.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Those blanks violate the coding conventions, see
scripts/checkpatch.pl.
Blanks missing after colons in the changed lines were added.
This patch does not try to fix tabs, long lines and other
problems in the changed lines, therefore checkpatch.pl reports
many violations.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
