The bypass config field should be initialized to 1 by default.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-5-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The driver can create a bypass domain by passing the
VIRTIO_IOMMU_ATTACH_F_BYPASS flag on the ATTACH request. Bypass domains
perform slightly better than domains with identity mappings since they
skip translation.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-4-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the virtio-iommu device must be programmed before it allows
DMA from any PCI device. This can make the VM entirely unusable when a
virtio-iommu driver isn't present, for example in a bootloader that
loads the OS from storage.
Similarly to the other vIOMMU implementations, default to DMA bypassing
the IOMMU during boot. Add a "boot-bypass" property, defaulting to true,
that lets users change this behavior.
Replace the VIRTIO_IOMMU_F_BYPASS feature, which didn't support bypass
before feature negotiation, with VIRTIO_IOMMU_F_BYPASS_CONFIG.
We add the bypass field to the migration stream without introducing
subsections, based on the assumption that this virtio-iommu device isn't
being used in production enough to require cross-version migration at
the moment (all previous version required workarounds since they didn't
support ACPI and boot-bypass).
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20220214124356.872985-3-jean-philippe@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replce the literal magic number 48 with length calculation (32 bytes at
the end of the firmware after the table footer + 16 bytes of the OVMF
table footer GUID).
No functional change intended.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20220222071906.2632426-3-dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When pc_system_parse_ovmf_flash() parses the optional GUIDed table in
the end of the OVMF flash memory area, the table length field is checked
for sizes that are too small, but doesn't error on sizes that are too
big (bigger than the flash content itself).
Add a check for maximal size of the OVMF table, and add an error report
in case the size is invalid. In such a case, an error like this will be
displayed during launch:
qemu-system-x86_64: OVMF table has invalid size 4047
and the table parsing is skipped.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Message-Id: <20220222071906.2632426-2-dovmurik@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
SC is required for some kernel features like vhost-vDPA. So this patch
implements basic SC feature. The idea is pretty simple, for software
emulated DMA it would be always coherent. In this case we can simple
advertise ECAP_SC bit. For VFIO and vhost, thing will be more much
complicated, so this patch simply fail the IOMMU notifier
registration.
In the future, we may want to have a dedicated notifiers flag or
similar mechanism to demonstrate the coherency so VFIO could advertise
that if it has VFIO_DMA_CC_IOMMU, for vhost kernel backend we don't
need that since it's a software backend.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220214060346.72455-1-jasowang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_vdpa_host_notifiers_init() initializes queue notifiers
for queues "dev->vq_index" to queue "dev->vq_index + dev->nvqs",
whereas vhost_vdpa_host_notifiers_uninit() uninitializes the
same notifiers for queue "0" to queue "dev->nvqs".
This asymmetry seems buggy, fix that by using dev->vq_index
as the base for both.
Fixes: d0416d487b ("vhost-vdpa: map virtqueue notification area if possible")
Cc: jasowang@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220211161309.1385839-1-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If call virtio_queue_set_host_notifier_mr fails, should free
host-notifier memory-region.
This problem can trigger a coredump with some vDPA drivers (mlx5,
but not with the vdpasim), if we unplug the virtio-net card from
the guest after a stop/start.
The same fix has been done for vhost-user:
1f89d3b91e ("hw/virtio: Fix leak of host-notifier memory-region")
Fixes: d0416d487b ("vhost-vdpa: map virtqueue notification area if possible")
Cc: jasowang@redhat.com
Resolves: https://bugzilla.redhat.com/2027208
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220211170259.1388734-1-lvivier@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_I2C_F_ZERO_LENGTH_REQUEST is a mandatory feature, that must be
implemented by everyone. Add its support.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <fc47ab63b1cd414319c9201e8d6c7705b5ec3bd9.1644490993.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The commit 04ceb61a40 ("virtio: Fail if iommu_platform is requested, but
unsupported") claims to fail the device hotplug when iommu_platform
is requested, but not supported by the (vhost) device. On the first
glance the condition for detecting that situation looks perfect, but
because a certain peculiarity of virtio_platform it ain't.
In fact the aforementioned commit introduces a regression. It breaks
virtio-fs support for Secure Execution, and most likely also for AMD SEV
or any other confidential guest scenario that relies encrypted guest
memory. The same also applies to any other vhost device that does not
support _F_ACCESS_PLATFORM.
The peculiarity is that iommu_platform and _F_ACCESS_PLATFORM collates
"device can not access all of the guest RAM" and "iova != gpa, thus
device needs to translate iova".
Confidential guest technologies currently rely on the device/hypervisor
offering _F_ACCESS_PLATFORM, so that, after the feature has been
negotiated, the guest grants access to the portions of memory the
device needs to see. So in for confidential guests, generally,
_F_ACCESS_PLATFORM is about the restricted access to memory, but not
about the addresses used being something else than guest physical
addresses.
This is the very reason for which commit f7ef7e6e3b ("vhost: correctly
turn on VIRTIO_F_IOMMU_PLATFORM") fences _F_ACCESS_PLATFORM from the
vhost device that does not need it, because on the vhost interface it
only means "I/O address translation is needed".
This patch takes inspiration from f7ef7e6e3b ("vhost: correctly turn on
VIRTIO_F_IOMMU_PLATFORM"), and uses the same condition for detecting the
situation when _F_ACCESS_PLATFORM is requested, but no I/O translation
by the device, and thus no device capability is needed. In this
situation claiming that the device does not support iommu_plattform=on
is counter-productive. So let us stop doing that!
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Jakob Naucke <Jakob.Naucke@ibm.com>
Fixes: 04ceb61a40 ("virtio: Fail if iommu_platform is requested, but
unsupported")
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20220207112857.607829-1-pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When vhost-user device cleanup, remove notifier MR and munmaps notifier
address in the event-handling thread, VM CPU thread writing the notifier
in concurrent fails with an error of accessing invalid address. It
happens because MR is still being referenced and accessed in another
thread while the underlying notifier mmap address is being freed and
becomes invalid.
This patch calls RCU and munmap notifiers in the callback after the
memory flatview update finish.
Fixes: 44866521bd ("vhost-user: support registering external host notifiers")
Cc: qemu-stable@nongnu.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Message-Id: <20220207071929.527149-3-xuemingl@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notifier set when vhost-user backend asks qemu to mmap an FD and
offset. When vhost-user backend restart or getting killed, VQ notifier
FD and mmap addresses become invalid. After backend restart, MR contains
the invalid address will be restored and fail on notifier access.
On the other hand, qemu should munmap the notifier, release underlying
hardware resources to enable backend restart and allocate hardware
notifier resources correctly.
Qemu shouldn't reference and use resources of disconnected backend.
This patch removes VQ notifier restore, uses the default vhost-user
notifier to avoid invalid address access.
After backend restart, the backend should ask qemu to install a hardware
notifier if needed.
Fixes: 44866521bd ("vhost-user: support registering external host notifiers")
Cc: qemu-stable@nongnu.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Message-Id: <20220207071929.527149-2-xuemingl@nvidia.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since change dcf359832eec02 ("hw/smbios: fix table memory corruption with large memory vms")
we reserve additional space between handle numbers of tables 17 and 19 for
large VMs. This may cause table 19 to collide with table 32 in their handle
numbers for those large VMs. This change adds an assertion to ensure numbers
do not collide. If they do, qemu crashes with useful debug information for
taking additional steps.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220223143322.927136-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current smbios table implementation splits the main memory in 16 GiB
(DIMM like) chunks. With the current smbios table assignment code, we can have
only 512 such chunks before the 16 bit handle numbers in the header for tables
17 and 19 conflict. A guest with more than 8 TiB of memory will hit this
limitation and would fail with the following assertion in isa-debugcon:
ASSERT_EFI_ERROR (Status = Already started)
ASSERT /builddir/build/BUILD/edk2-ca407c7246bf/OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.c(125): !EFI_ERROR (Status)
This change adds an additional offset between tables 17 and 19 handle numbers
when configuring VMs larger than 8 TiB of memory. The value of the offset is
calculated to be equal to the additional space required to be reserved
in order to accomodate more DIMM entries without the table handles colliding.
In normal cases where the VM memory is smaller or equal to 8 TiB, this offset
value is 0. Hence in this case, no additional handle numbers are reserved and
table handle values remain as before.
Since smbios memory is not transmitted over the wire during migration,
this change can break migration for large memory vms if the guest is in the
middle of generating the tables during migration. However, in those
situations, qemu generates invalid table handles anyway with or without this
fix. Hence, we do not preserve the old bug by introducing compat knobs/machine
types.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2023977
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220223143322.927136-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a minor cleanup. Using macro definitions makes the code more
readable. It is at once clear which tables use which handle numbers in their
header. It also makes it easy to calculate the gaps between the numbers and
update them if needed.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This change is cosmetic. IS_UEFI_CPER_RECORD macro definition that was added
as a part of the ERST implementation seems to be unused. Remove it.
CC: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adding device ID for ERST device in pci-ids.txt. It was missed when ERST
related patches were reviewed.
CC: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I am already listed as a reviewer for ACPI/SMBIOS subsystem. There is no need to
again add me as a reviewer for ACPI/VIOT.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Information on the implementation of the ACPI ERST support.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QOM reference counting is not designed with an infinite amount of
references in mind, trying to take a reference in a loop without
dropping a reference will overflow the integer.
It is generally a symptom of a reference leak (a missing deref, commonly
as part of error handling - such as one fixed here:
https://lore.kernel.org/r/20220228095058.27899-1-sgarzare%40redhat.com ).
All this can lead to either freeing the object too early (memory
corruption) or never freeing it (memory leak).
If we happen to dereference at just the right time (when it's wrapping
around to 0), we might eventually assert when dereferencing, but the
real problem is an extra object_ref so let's assert there to make such
issues cleaner and easier to debug.
Some micro-benchmarking shows using fetch and add this is essentially
free on x86.
Since multiple threads could be incrementing in parallel, we assert
around INT_MAX to make sure none of these approach the wrap around
point: this way we get a memory leak and not a memory corruption, the
former is generally easier to debug.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A bit of a mix this time:
* Minor fixes from myself, Hanna, and Jack
* VNC password rework by Stefan and Fabian
* Postcopy changes from Peter X that are
the start of a larger series to come
* Removing the prehistoic load_state_old
code from Peter M
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=L5uY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20220302b' into staging
Migration/HMP/Virtio pull 2022-03-02
A bit of a mix this time:
* Minor fixes from myself, Hanna, and Jack
* VNC password rework by Stefan and Fabian
* Postcopy changes from Peter X that are
the start of a larger series to come
* Removing the prehistoic load_state_old
code from Peter M
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 02 Mar 2022 18:25:12 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-migration-20220302b:
migration: Remove load_state_old and minimum_version_id_old
tests: Pass in MigrateStart** into test_migrate_start()
migration: Add migration_incoming_transport_cleanup()
migration: postcopy_pause_fault_thread() never fails
migration: Enlarge postcopy recovery to capture !-EIO too
migration: Move static var in ram_block_from_stream() into global
migration: Add postcopy_thread_create()
migration: Dump ramblock and offset too when non-same-page detected
migration: Introduce postcopy channels on dest node
migration: Tracepoint change in postcopy-run bottom half
migration: Finer grained tracepoints for POSTCOPY_LISTEN
migration: Dump sub-cmd name in loadvm_process_command tp
migration/rdma: set the REUSEADDR option for destination
qapi/monitor: allow VNC display id in set/expire_password
qapi/monitor: refactor set/expire_password with enums
monitor/hmp: add support for flag argument with value
virtiofsd: Let meson check for statx.stx_mnt_id
clock-vmstate: Add missing END_OF_LIST
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 6e657e64cd in 2013 we added some autorelease pools to
deal with complaints from macOS when we made calls into Cocoa from
threads that didn't have automatically created autorelease pools.
Later on, macOS got stricter about forbidding cross-thread Cocoa
calls, and in commit 5588840ff7 we restructured the code to
avoid them. This left the autorelease pool creation in several
functions without any purpose; delete it.
We still need the pool in cocoa_refresh() for the clipboard related
code which is called directly there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-3-peter.maydell@linaro.org
The updateUIInfo method makes Cocoa API calls. It also calls back
into QEMU functions like dpy_set_ui_info(). To do this safely, we
need to follow two rules:
* Cocoa API calls are made on the Cocoa UI thread
* When calling back into QEMU we must hold the iothread lock
Fix the places where we got this wrong, by taking the iothread lock
while executing updateUIInfo, and moving the call in cocoa_switch()
inside the dispatch_async block.
Some of the Cocoa UI methods which call updateUIInfo are invoked as
part of the initial application startup, while we're still doing the
little cross-thread dance described in the comment just above
call_qemu_main(). This meant they were calling back into the QEMU UI
layer before we'd actually finished initializing our display and
registered the DisplayChangeListener, which isn't really valid. Once
updateUIInfo takes the iothread lock, we no longer get away with
this, because during this startup phase the iothread lock is held by
the QEMU main-loop thread which is waiting for us to finish our
display initialization. So we must suppress updateUIInfo until
applicationDidFinishLaunching allows the QEMU main-loop thread to
continue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-2-peter.maydell@linaro.org
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We support 16k pages, but do not advertize that in ID_AA64MMFR0.
The value 0 in the TGRAN*_2 fields indicates that stage2 lookups defer
to the same support as stage1 lookups. This setting is deprecated, so
indicate support for all stage2 page sizes directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220301215958.157011-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For FEAT_LPA2, we will need other ARMVAParameters, which themselves
depend on the translation granule in use. We might as well validate
that the given TG matches; the architecture "does not require that
the instruction invalidates any entries" if this is not true.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The shift of the BaseADDR field depends on the translation
granule in use.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge tlbi_aa64_range_get_length and tlbi_aa64_range_get_base,
returning a structure containing both results. Pass in the
ARMMMUIdx, rather than the digested two_ranges boolean.
This is in preparation for FEAT_LPA2, where the interpretation
of 'value' depends on the effective value of DS for the regime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_LPA2, rather than introducing translation level 4,
we introduce level -1, below the current level 0. Extend
arm_fi_to_lfsc to handle these faults.
Assert that this new translation level does not leak into
fault types for which it is not defined, which allows some
masking of fi->level to be removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original A.a revision of the AArch64 ARM required that we
force-extend the addresses in these registers from 49 bits.
This language has been loosened via a combination of IMPLEMENTATION
DEFINED and CONSTRAINTED UNPREDICTABLE to allow consideration of
the entire aligned address.
This means that we do not have to consider whether or not FEAT_LVA
is enabled, and decide from which bit an address might need to be
extended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field controls the output (intermediate) physical address size
of the translation process. V8 requires to raise an AddressSize
fault if the page tables are programmed incorrectly, such that any
intermediate descriptor address, or the final translated address,
is out of range.
Add a PS field to ARMVAParameters, and properly compute outputsize
in get_phys_addr_lpae. Test the descaddr as extracted from TTBR
and from page table entries.
Restrict descaddrmask so that we won't raise the fault for v7.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro is a bit more readable than the inlined computation.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass down the width of the output address from translation.
For now this is still just PAMax, but a subsequent patch will
compute the correct value from TCR_ELx.{I}PS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly share parts of this function with other portions
of address translation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without FEAT_LVA, the behaviour of programming an invalid value
is IMPLEMENTATION DEFINED. With FEAT_LVA, programming an invalid
minimum value requires a Translation fault.
It is most self-consistent to choose to generate the fault always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set this as the kernel would, to 48 bits, to keep the computation
of the address space correct for PAuth.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new macros to manipulate signed fields within the register.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-2-richard.henderson@linaro.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
handle_simd_shift_fpint_conv() was accidentally freeing the TCG
temporary tcg_fpstatus too early, before the last use of it. Move
the free down to where it belongs.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: cleaned up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the latest PSCI on TCG and HVF. A 64-bit function called from
AArch32 now returns NOT_SUPPORTED, which is necessary to adhere to SMC
Calling Convention 1.0. It is still not compliant with SMCCC 1.3 since
they do not implement mandatory functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220213035753.34577-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: update MISMATCH_CHECK checks on PSCI_VERSION macros to match]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously this device created N subdevices which each owned an i2c bus.
Now this device simply owns the N i2c busses directly.
Tested: Verified devices behind mux are still accessible via qmp and i2c
from within an arm32 SoC.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220202164533.1283668-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tsc210x doesn't support anything other than 16-bit reads on the
SPI bus, but the guest can program the SPI controller to attempt
them anyway. If this happens, don't abort QEMU, just log this as
a guest error.
This fixes our machine_arm_n8x0.py:N8x0Machine.test_n800
acceptance test, which hits this assertion.
The reason we hit the assertion is because the guest kernel thinks
there is a TSC2005 on this SPI bus address, not a TSC210x. (The n810
*does* have a TSC2005 at this address.) The TSC2005 supports the
24-bit accesses which the guest driver makes, and the TSC210x does
not (that is, our TSC210x emulation is not missing support for a word
width the hardware can handle). It's not clear whether the problem
here is that the guest kernel incorrectly thinks the n800 has the
same device at this SPI bus address as the n810, or that QEMU's n810
board model doesn't get the SPI devices right. At this late date
there no longer appears to be any reliable information on the web
about the hardware behaviour, but I am inclined to think this is a
guest kernel bug. In any case, we prefer not to abort QEMU for
guest-triggerable conditions, so logging the error is the right thing
to do.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/736
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220221140750.514557-1-peter.maydell@linaro.org
The AN547 application note URL has changed: update our comment
accordingly. (Rev B is still downloadable from the old URL,
but there is a new Rev C of the document now.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220221094144.426191-1-peter.maydell@linaro.org
With these interfaces missing, TFM would delegate peripherals 0, 1,
2, 3 and 8, and qemu would ignore the delegation of interface 8, as
it thought interface 4 was eth & USB.
This patch corrects this behavior and allows TFM to delegate the
eth & USB peripheral to NS mode.
(The old QEMU behaviour was based on revision B of the AN547
appnote; revision C corrects this error in the documentation,
and this commit brings QEMU in to line with how the FPGA
image really behaves.)
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Message-id: 20220210210227.3203883-1-jimmy.brisson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added commit message note clarifying that the old behaviour
was a docs issue, not because there were two different versions
of the FPGA image]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are no longer any VMStateDescription structs in the tree which
use the load_state_old support for custom handling of incoming
migration from very old QEMU. Remove the mechanism entirely.
This includes removing one stray useless setting of
minimum_version_id_old in a VMStateDescription with no load_state_old
function, which crept in after the global weeding-out of them in
commit 17e3134061.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220215175705.3846411-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Jean-Philippe Brucker