All the example code are indented with four spaces except this one.
Fix this by adding four spaces here.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190304071631.27567-3-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We didn't specify the indent rule for multiline code here, which may
mislead users. And in current code, the code use various styles.
Add this rule in CODING_STYLE to make sure this is clear to every one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190304071631.27567-2-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This just about rewrites the entirety of the bitmaps.rst document to
make it consistent with the 4.0 release. I have added new features seen
in the 4.0 release, as well as tried to clarify some points that keep
coming up when discussing this feature both in-house and upstream.
It does not yet cover pull backups or migration details, but I intend to
keep extending this document to cover those cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-3-jsnow@redhat.com
[Adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.
Further, turn those warnings into errors so we can be alerted to these
problems sooner rather than later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-2-jsnow@redhat.com
[adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a gva2gpa command purely for debug which performs
address translation on the gva, the existing gpa2hva
command can then also be used to find it in the qemu
userspace; e.g.
(qemu) info registers
.... RSP=ffffffff81c03e98
....
(qemu) gva2gpa 0xffffffff81c03e98
gpa: 0x1c03e98
(qemu) gpa2hva 0x1c03e98
Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98
(qemu) x/10x 0xffffffff81c03e98
ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
ffffffff81c03eb8: 0x81c03ec8 0xffffffff
gdb -p ...qemu...
(gdb) x/10x 0x7f0599a03e98
0x7f0599a03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
0x7f0599a03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
0x7f0599a03eb8: 0x81c03ec8 0xffffffff
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190412152652.827-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This gives us the consistent 'Error:' prefix added in 66363e9a43,
which helps users like libvirt who still need to scrape hmp error
messages to detect failure.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <984634226fa14316641f31f84e7dd0bb770bd94c.1556141033.git.crobinso@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes
-----BEGIN PGP SIGNATURE-----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=ZVvj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes
# gpg: Signature made Tue 30 Apr 2019 16:35:09 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (27 commits)
block/qed: add missed coroutine_fn markers
iotests: Check that images are in read-only mode after block-commit
commit: Make base read-only if there is an early failure
qemu-img: use buffer-based io
block/stream: use buffer-based io
block/commit: use buffer-based io
block/backup: use buffer-based io
block/parallels: use buffer-based io
block/qed: use buffer-based io
block/qcow: use buffer-based io
block/qcow2: use buffer-based io
block: introduce byte-based io helpers
qcow2: Fix error handling in the compression code
qcow2: Fix qcow2_make_empty() with external data file
qemu-img: Make create hint at protocol options
iotests: Perform the correct test in 082
qcow2: Fix full preallocation with external data file
qcow2: Add errp to preallocate_co()
qcow2: Avoid COW during metadata preallocation
qemu-img: Saner printing of large file sizes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qed_read_table and qed_write_table use coroutine-only interfaces but
are not marked coroutine_fn. Happily, they are called only from
coroutine context, so we only need to add missed markers.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
You can reproduce this by passing an invalid filter-node-name (like
"1234") to block-commit. In this case the base image is put in
read-write mode but is never reset back to read-only.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move to _co_ versions of io functions qed_read_table() and
qed_write_table(), as we use qemu_co_mutex_unlock()
anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes a few things in the way error codes are handled in
the qcow2 compression code:
a) qcow2_co_pwritev_compressed() expects qcow2_co_compress() to only
return -1 or -2 on failure, but this is not correct. Since the
change from qcow2_compress() to qcow2_co_compress() in commit
ceb029cd6f the new code can also return -EINVAL (although
there does not seem to exist any code path that would cause that
error in the current implementation).
b) -1 and -2 are ad-hoc error codes defined in qcow2_compress().
This patch replaces them with standard constants from errno.h.
c) Both qcow2_compress() and qcow2_co_do_compress() return a negative
value on failure, but qcow2_co_pwritev_compressed() stores the
value in an unsigned data type.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
make_completely_empty() is an optimisated path for bdrv_make_empty()
where completely new metadata is created inside the image file instead
of going through all clusters and discarding them. For an external data
file, however, we actually need to do discard operations on the data
file; just overwriting the qcow2 file doesn't get rid of the data.
The necessary slow path with an explicit discard operation already
exists for other cases. Use it for external data files, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-img create allows giving just a format and "-o help" to get a list
of the options supported by that format. Users may not realize that the
protocol level may offer even more options, which they only get to see
by specifying a filename.
This patch adds a note to hint at that fact.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the "amend" section of 082, we perform a single "convert" test
(namely "convert -o help"). That does not make sense, especially
because we have done exactly that "convert" test earlier in 082 already.
Replacing "convert" by "amend" yields an error, which is correct because
there is no point in "amend" having a default format. The user has to
either specify the format, or give a file for qemu-img to probe.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
preallocate_co() already gave the data file the full size without
forwarding the requested preallocation mode to the protocol. When
bdrv_co_truncate() was called later with the preallocation mode, the
file didn't actually grow any more, so the data file stayed unallocated
even if full preallocation was requested.
Pass the right preallocation mode to preallocate_co() and remove the
second bdrv_co_truncate() to fix this. As a side effect, the ugly
one-byte write in preallocate_co() is replaced with a truncate call,
now leaving the last block unallocated on the protocol level as it
should be.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We'll add a bdrv_co_truncate() call in the next patch which can return
an Error that we don't want to discard. So add an errp parameter to
preallocate_co().
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Limiting the allocation to INT_MAX bytes isn't particularly clever
because it means that the final cluster will be a partial cluster which
will be completed through a COW operation. This results in unnecessary
data read and write requests which lead to an unwanted non-sparse
filesystem block for metadata preallocation.
Align the maximum allocation size down to the cluster size to avoid this
situation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:
$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable
But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).
Quite a few iotests need updates to expected output to match.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
When extracting a human-readable size formatter, we changed 'uint64_t
div' pre-patch to 'unsigned long div' post-patch. Which breaks on
32-bit platforms, resulting in 'inf' instead of intended values larger
than 999GB.
Fixes: 22951aaa
CC: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using IEC binary prefixes in order to make the code more readable,
with the exception of DEFAULT_LOG_SIZE because it's passed to
stringify().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IEC binary prefixes are already defined in "qemu/units.h",
so we can remove redundant definitions in "block/vhdx.h".
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b69864e5a ("vmdk: Support version=3 in VMDK descriptor files")
fixed the probe function to correctly guess vmdk descriptors with
version=3.
This solves the issue where vmdk snapshot with parent vmdk descriptor
containing "version=3" would be treated as raw instead vmdk.
In the future case where a new vmdk version is introduced, we will again
experience this issue, even if the user will provide "-f vmdk" it will
only apply to the tip image and not to the underlying "misprobed" parent
image.
The code in vmdk.c already assumes that the backing file of vmdk must be
vmdk (see vmdk_is_cid_valid which returns 0 if backing file is not
vmdk).
So let's make it official by supplying the backing_format as vmdk.
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-By: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Concurrent IO becomes serial IO because of the qemu Coroutine lock,
which reduce IO performance severely.
So unlock Coroutine lock before bdrv_co_pwritev and
bdrv_co_preadv to fix it.
Signed-off-by: Zhengui li <lizhengui@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even for block nodes with bs->drv == NULL, we can't just ignore a
bdrv_set_aio_context() call. Leaving the node in its old context can
mean that it's still in an iothread context in bdrv_close_all() during
shutdown, resulting in an attempted unlock of the AioContext lock which
we don't hold.
This is an example stack trace of a related crash:
#0 0x00007ffff59da57f in raise () at /lib64/libc.so.6
#1 0x00007ffff59c4895 in abort () at /lib64/libc.so.6
#2 0x0000555555b97b1e in error_exit (err=<optimized out>, msg=msg@entry=0x555555d386d0 <__func__.19059> "qemu_mutex_unlock_impl") at util/qemu-thread-posix.c:36
#3 0x0000555555b97f7f in qemu_mutex_unlock_impl (mutex=mutex@entry=0x5555568002f0, file=file@entry=0x555555d378df "util/async.c", line=line@entry=507) at util/qemu-thread-posix.c:97
#4 0x0000555555b92f55 in aio_context_release (ctx=ctx@entry=0x555556800290) at util/async.c:507
#5 0x0000555555b05cf8 in bdrv_prwv_co (child=child@entry=0x7fffc80012f0, offset=offset@entry=131072, qiov=qiov@entry=0x7fffffffd4f0, is_write=is_write@entry=true, flags=flags@entry=0)
at block/io.c:833
#6 0x0000555555b060a9 in bdrv_pwritev (qiov=0x7fffffffd4f0, offset=131072, child=0x7fffc80012f0) at block/io.c:990
#7 0x0000555555b060a9 in bdrv_pwrite (child=0x7fffc80012f0, offset=131072, buf=<optimized out>, bytes=<optimized out>) at block/io.c:990
#8 0x0000555555ae172b in qcow2_cache_entry_flush (bs=bs@entry=0x555556810680, c=c@entry=0x5555568cc740, i=i@entry=0) at block/qcow2-cache.c:51
#9 0x0000555555ae18dd in qcow2_cache_write (bs=bs@entry=0x555556810680, c=0x5555568cc740) at block/qcow2-cache.c:248
#10 0x0000555555ae15de in qcow2_cache_flush (bs=0x555556810680, c=<optimized out>) at block/qcow2-cache.c:259
#11 0x0000555555ae16b1 in qcow2_cache_flush_dependency (c=0x5555568a1700, c=0x5555568a1700, bs=0x555556810680) at block/qcow2-cache.c:194
#12 0x0000555555ae16b1 in qcow2_cache_entry_flush (bs=bs@entry=0x555556810680, c=c@entry=0x5555568a1700, i=i@entry=0) at block/qcow2-cache.c:194
#13 0x0000555555ae18dd in qcow2_cache_write (bs=bs@entry=0x555556810680, c=0x5555568a1700) at block/qcow2-cache.c:248
#14 0x0000555555ae15de in qcow2_cache_flush (bs=bs@entry=0x555556810680, c=<optimized out>) at block/qcow2-cache.c:259
#15 0x0000555555ad242c in qcow2_inactivate (bs=bs@entry=0x555556810680) at block/qcow2.c:2124
#16 0x0000555555ad2590 in qcow2_close (bs=0x555556810680) at block/qcow2.c:2153
#17 0x0000555555ab0c62 in bdrv_close (bs=0x555556810680) at block.c:3358
#18 0x0000555555ab0c62 in bdrv_delete (bs=0x555556810680) at block.c:3542
#19 0x0000555555ab0c62 in bdrv_unref (bs=0x555556810680) at block.c:4598
#20 0x0000555555af4d72 in blk_remove_bs (blk=blk@entry=0x5555568103d0) at block/block-backend.c:785
#21 0x0000555555af4dbb in blk_remove_all_bs () at block/block-backend.c:483
#22 0x0000555555aae02f in bdrv_close_all () at block.c:3412
#23 0x00005555557f9796 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4776
The reproducer I used is a qcow2 image on gluster volume, where the
virtual disk size (4 GB) is larger than the gluster volume size (64M),
so we can easily trigger an ENOSPC. This backend is assigned to a
virtio-blk device using an iothread, and then from the guest a
'dd if=/dev/zero of=/dev/vda bs=1G count=1' causes the VM to stop
because of an I/O error. qemu_gluster_co_flush_to_disk() sets
bs->drv = NULL on error, so when virtio-blk stops the dataplane, the
block nodes stay in the iothread AioContext. A 'quit' monitor command
issued from this paused state crashes the process.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1631227
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
One of the recent commits changed the way qemu-io prints out its
errors and warnings - they are now prefixed with the program name.
We've got to adapt the iotests accordingly to prevent that they
are failing.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The EXCP_DMP trap is considered legacy.
"In PA-RISC 1.1 (Second Edition) and later revisions, processors must use
traps 26, 27,and 28 which provide equivalent functionality"
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <20190423063621.8203-3-nick.hudson@gmx.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These instructions are present on pcxl and pcxl2 machines,
and are used by NetBSD and OpenBSD. See
https://parisc.wiki.kernel.org/images-parisc/a/a9/Pcxl2_ers.pdf
page 13-9 (195/206)
Signed-off-by: Nick Hudson <skrll@netbsd.org>
Message-Id: <20190423063621.8203-2-nick.hudson@gmx.co.uk>
[rth: Use extending loads, locally managed temporaries.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* remove "bag of random stuff" hw/devices.h header
* implement FPU for Cortex-M and enable it for Cortex-M4 and -M33
* hw/dma: Compile the bcm2835_dma device as common object
* configure: Remove --source-path option
* hw/ssi/xilinx_spips: Avoid variable length array
* hw/arm/smmuv3: Remove SMMUNotifierNode
-----BEGIN PGP SIGNATURE-----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=jQTu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190429' into staging
target-arm queue:
* remove "bag of random stuff" hw/devices.h header
* implement FPU for Cortex-M and enable it for Cortex-M4 and -M33
* hw/dma: Compile the bcm2835_dma device as common object
* configure: Remove --source-path option
* hw/ssi/xilinx_spips: Avoid variable length array
* hw/arm/smmuv3: Remove SMMUNotifierNode
# gpg: Signature made Mon 29 Apr 2019 17:58:57 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190429: (42 commits)
hw/devices: Move SMSC 91C111 declaration into a new header
hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string
hw/net/ne2000-isa: Add guards to the header
hw/devices: Move LAN9118 declarations into a new header
hw/devices: Move TI touchscreen declarations into a new header
hw/devices: Move Gamepad declarations into a new header
hw/devices: Move CBus declarations into a new header
hw/devices: Move Blizzard declarations into a new header
hw/devices: Move TC6393XB declarations into a new header
hw/display/tc6393xb: Remove unused functions
hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string
hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string
hw/dma: Compile the bcm2835_dma device as common object
target/arm: Enable FPU for Cortex-M4 and Cortex-M33
target/arm: Implement VLLDM for v7M CPUs with an FPU
target/arm: Implement VLSTM for v7M CPUs with an FPU
target/arm: Implement M-profile lazy FP state preservation
target/arm: Add lazy-FP-stacking support to v7m_stack_write()
target/arm: New function armv7m_nvic_set_pending_lazyfp()
target/arm: New helper function arm_v7m_mmu_idx_all()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit finally deletes "hw/devices.h".
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-13-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-12-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-11-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-10-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since uWireSlave is only used in this new header, there is no
need to expose it via "qemu/typedefs.h".
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-7-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an entries the Blizzard device in MAINTAINERS.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wei Yang
Philippe Mathieu-Daudé
Peter Maydell
John Snow
Dr. David Alan Gilbert
Cole Robinson
Vladimir Sementsov-Ogievskiy
Alberto Garcia
Kevin Wolf
Max Reitz
Eric Blake
Stefano Garzarella
Sam Eiderman
Zhengui li
Thomas Huth
Nick Hudson