Commit Graph

78269 Commits

Author SHA1 Message Date
BALATON Zoltan 2bbcaa7cd6 ati-vga: Add dummy MEM_SDRAM_MODE_REG
Radeon chips have an SDRAM mode reg that is accessed by some drivers.
We don't emulate the memory controller but provide some default value
to prevent drivers getting unexpected 0.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: cc1324b9ef06beb8ae233ddc77dedd8bab9b8624.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:54:24 +02:00
BALATON Zoltan 41977c65c0 ati-vga: Do not assert on error
Do not abort on unsupported value just print log and continue. While
display will likely be broken this prevents malicious guest to crash
QEMU causing denial of service.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 0c13dab5d8e3b7e7479c3edbf53aeac8c09de6de.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:54:24 +02:00
BALATON Zoltan d634c883ca ati-vga: Support unaligned access to hardware cursor registers
This fixes horizontal mouse movement and pointer color with MacOS that
writes these registers with access size less than 4 so previously only
the last portion of access was effective overwriting previous partial
writes.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: ba1d5ba97f246e8807f86f1243c2bdc6497dc8f2.1592737958.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:54:24 +02:00
BALATON Zoltan 9982c605a7 sm501: Fix and optimize overlap check
When doing reverse blit we need to check if source and dest overlap
but it is not trivial due to possible different base and pitch of
source and dest. Do rectangle overlap if base and pitch match,
otherwise just check if memory area containing the rects overlaps so
rects could possibly overlap.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200624164737.A941374633D@zero.eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:50:04 +02:00
BALATON Zoltan d8327a6869 sm501: Convert debug printfs to traces
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: caf97bf0c84a440896ddf020e84c312fa5c15076.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan f018edc358 sm501: Do not allow guest to set invalid format
Prevent guest setting invalid format value that might trip checks in
sm501_2d_operation().

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 26d4fa9b8ce81e2723e98d592ccba7550042752c.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan ba27110fab sm501: Use stn_he_p/ldn_he_p instead of switch/case
Instead of open coding op with different sizes using a switch and type
casting it can be written more compactly using stn_he_p/ldn_he_p.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: e2f649cb286f0735a10ec87c1b36a7ae081acb61.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan c208085a3e sm501: Optimise 1 pixel 2d ops
Some guests do 1x1 blits which is faster to do directly than calling a
function for it so avoid overhead in this case.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7cccc302d7b4c5c313bad7681ac4686417143c3e.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan 299778d5af sm501: Introduce variable for commonly used value for better readability
The bytes per pixel value can be calculated from format but it's used
freqently enough (and will be used more in subseqent patches) so store
it in a variable for better readabilty. Also drop some unneded 0x
prefix around where new variable is defined.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b9ea5ef2d68583db9f3fb73a2b859abbd7c044a8.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan 1cb62e3666 sm501: Ignore no-op blits
Some guests seem to try source copy blits with same source and dest
which are no-op so avoid calling pixman for these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: a2a8214dd37344dfb65f1c343ace4cff2e94f3bb.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan 4decaad9d2 sm501: Drop unneded variable
We don't need a separate variable to keep track if we allocated memory
that needs to be freed as we can test the pointer itself.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff9136c3151a15cdfa1d9b7a68acf11cffb8efa4.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
BALATON Zoltan 84ec3f9402 sm501: Fix bounds checks
We don't need to add width to pitch when calculating last point, that
would reject valid ops within the card's local_mem.

Fixes: b15a22bbcb
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ddb5781d12913bb9d6dbfd9e5b1e2b893e2b3e2d.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30 22:46:28 +02:00
Philippe Mathieu-Daudé fc1bff9589 hw/misc/pca9552: Add missing TypeInfo::class_size field
When adding the generic PCA955xClass in commit 736132e455, we
forgot to set the class_size field. Fill it now to avoid:

  (gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  double free or corruption (!prev)
  Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted.
  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  (gdb) where
  #0  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  #1  0x00007ffff75d8859 in __GI_abort () at abort.c:79
  #2  0x00007ffff76433ee in __libc_message
      (action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n")
      at ../sysdeps/posix/libc_fatal.c:155
  #3  0x00007ffff764b47c in malloc_printerr
      (str=str@entry=0x7ffff776f690 "double free or corruption (!prev)")
      at malloc.c:5347
  #4  0x00007ffff764d12c in _int_free
      (av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317
  #5  0x0000555555c906c3 in type_initialize_interface
      (ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259
  #6  0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40)
      at qom/object.c:323
  #7  0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40)
      at qom/object.c:1028

  $ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479== Memcheck, a memory error detector
  ==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
  ==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info
  ==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479==
  ==77479== Invalid write of size 2
  ==77479==    at 0x6D8322: pca9552_class_init (pca9552.c:424)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)
  ==77479==  Address 0x583f108 is 0 bytes after a block of size 200 alloc'd
  ==77479==    at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
  ==77479==    by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x844258: type_initialize.part.0 (object.c:306)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)

Fixes: 736132e455 ("hw/misc/pca9552: Add generic PCA955xClass")
Reported-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 20200629074704.23028-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-29 21:16:10 +01:00
Peter Maydell e7651153a8 MIPS + TCG Continuous Benchmarking queue for June 27th, 2020
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJe955oAAoJENSXKoln91plMh4H/jTvoVAJGyqL4HEplDYwnmQR
 igIUc5D4BFViUzBFknW6p5rfy8wRonaWs8rTgWqhcUGPYcSlMjOYEyvtdOa46X0K
 OKZk+qd1T3iopo2wwZR4hrCt2VNm2B4+E95Qv5A/GGrr/KBzt2Q9H6Qr6hYyT0Y9
 Yq/FVPkHxQC+2zkqDlrjShHqJt+c79RxFOuZTDdIdjmGcLhrLspZPeKNP9JUexAO
 blwoOPQlMcu922aRzPI/vHwNEzCg2/p6O4eEgzpzK2tzbAGQXYAkKBTsQioyS/vB
 59OQ6SRuFCESO2lVxg9mdGSpV/d/joPJYYdx/GNlU3N51k0diwm1QkyeHk/RrI4=
 =WKaK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-gsoc-queue-jun-27-2020' into staging

MIPS + TCG Continuous Benchmarking queue for June 27th, 2020

# gpg: Signature made Sat 27 Jun 2020 20:30:48 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-gsoc-queue-jun-27-2020:
  MAINTAINERS: Add 'Performance Tools and Tests' subsection
  scripts/performance: Add topN_callgrind.py script
  scripts/performance: Add topN_perf.py script
  MAINTAINERS: Add Loongson-3 maintainer and reviewer
  hw/intc: Add Loongson LIOINTC support
  hw/mips: Implement the kvm_type() hook in MachineClass

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-27 22:57:36 +01:00
Aleksandar Markovic 53fb8bfb93 MAINTAINERS: Add 'Performance Tools and Tests' subsection
This commit creates a new 'Miscellaneous' section which hosts a new
'Performance Tools and Tests' subsection. This subsection will contain
the the performance scripts and benchmarks written as a part of the
'TCG Continuous Benchmarking' project. Also, it will be a placeholder
for follow-ups to this project, if any.

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-4-ahmedkhaledkaraman@gmail.com>
2020-06-27 20:15:07 +02:00
Ahmed Karaman 5c362ccfde scripts/performance: Add topN_callgrind.py script
Python script that prints the top N most executed functions in QEMU
using callgrind.

Syntax:
topN_callgrind.py [-h] [-n] <number of displayed top functions>  -- \
                      <qemu executable> [<qemu executable options>] \
                      <target executable> [<target execurable options>]

[-h] - Print the script arguments help message.
[-n] - Specify the number of top functions to print.
     - If this flag is not specified, the tool defaults to 25.

Example of usage:
topN_callgrind.py -n 20 -- qemu-arm coulomb_double-arm

Example Output:
No.  Percentage Function Name         Source File
----  --------- ------------------    ------------------------------
   1    24.577% 0x00000000082db000    ???
   2    20.467% float64_mul           <qemu>/fpu/softfloat.c
   3    14.720% float64_sub           <qemu>/fpu/softfloat.c
   4    13.864% float64_add           <qemu>/fpu/softfloat.c
   5     4.876% helper_mulsd          <qemu>/target/i386/ops_sse.h
   6     3.767% helper_subsd          <qemu>/target/i386/ops_sse.h
   7     3.549% helper_addsd          <qemu>/target/i386/ops_sse.h
   8     2.185% helper_ucomisd        <qemu>/target/i386/ops_sse.h
   9     1.667% helper_lookup_tb_ptr  <qemu>/include/exec/tb-lookup.h
  10     1.662% f64_compare           <qemu>/fpu/softfloat.c
  11     1.509% helper_lookup_tb_ptr  <qemu>/accel/tcg/tcg-runtime.c
  12     0.635% helper_lookup_tb_ptr  <qemu>/include/exec/exec-all.h
  13     0.616% float64_div           <qemu>/fpu/softfloat.c
  14     0.502% helper_pand_xmm       <qemu>/target/i386/ops_sse.h
  15     0.502% float64_mul           <qemu>/include/fpu/softfloat.h
  16     0.476% helper_lookup_tb_ptr  <qemu>/target/i386/cpu.h
  17     0.437% float64_compare_quiet <qemu>/fpu/softfloat.c
  18     0.414% helper_pxor_xmm       <qemu>/target/i386/ops_sse.h
  19     0.353% round_to_int          <qemu>/fpu/softfloat.c
  20     0.347% helper_cc_compute_all <qemu>/target/i386/cc_helper.c

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-3-ahmedkhaledkaraman@gmail.com>
2020-06-27 20:07:59 +02:00
Ahmed Karaman c5a5839856 scripts/performance: Add topN_perf.py script
Syntax:
topN_perf.py [-h] [-n] <number of displayed top functions>  -- \
                 <qemu executable> [<qemu executable options>] \
                 <target executable> [<target execurable options>]

[-h] - Print the script arguments help message.
[-n] - Specify the number of top functions to print.
     - If this flag is not specified, the tool defaults to 25.

Example of usage:
topN_perf.py -n 20 -- qemu-arm coulomb_double-arm

Example Output:
 No.  Percentage  Name                       Invoked by
----  ----------  -------------------------  -------------------------
   1      16.25%  float64_mul                qemu-x86_64
   2      12.01%  float64_sub                qemu-x86_64
   3      11.99%  float64_add                qemu-x86_64
   4       5.69%  helper_mulsd               qemu-x86_64
   5       4.68%  helper_addsd               qemu-x86_64
   6       4.43%  helper_lookup_tb_ptr       qemu-x86_64
   7       4.28%  helper_subsd               qemu-x86_64
   8       2.71%  f64_compare                qemu-x86_64
   9       2.71%  helper_ucomisd             qemu-x86_64
  10       1.04%  helper_pand_xmm            qemu-x86_64
  11       0.71%  float64_div                qemu-x86_64
  12       0.63%  helper_pxor_xmm            qemu-x86_64
  13       0.50%  0x00007f7b7004ef95         [JIT] tid 491
  14       0.50%  0x00007f7b70044e83         [JIT] tid 491
  15       0.36%  helper_por_xmm             qemu-x86_64
  16       0.32%  helper_cc_compute_all      qemu-x86_64
  17       0.30%  0x00007f7b700433f0         [JIT] tid 491
  18       0.30%  float64_compare_quiet      qemu-x86_64
  19       0.27%  soft_f64_addsub            qemu-x86_64
  20       0.26%  round_to_int               qemu-x86_64

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-2-ahmedkhaledkaraman@gmail.com>
2020-06-27 20:07:09 +02:00
Huacai Chen 2c5b1a7dbb MAINTAINERS: Add Loongson-3 maintainer and reviewer
Add myself as the maintainer for Loongson-3 virtual platforms, and
also add Jiaxun Yang as the reviewer.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-5-git-send-email-chenhc@lemote.com>
2020-06-27 19:55:52 +02:00
Huacai Chen c012e0b1f9 hw/intc: Add Loongson LIOINTC support
Loongson-3 has an integrated liointc (Local I/O Interrupt Controller).
It is similar to Goldfish interrupt controller, but more powerful (e.g.,
it can route external interrupt to multi-cores).

Documents about Loongson-3's liointc:
1, https://wiki.godson.ac.cn/ip_block:liointc;
2, The "I/O中断" section of Loongson-3's user mannual, part 1.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-3-git-send-email-chenhc@lemote.com>
2020-06-27 19:42:22 +02:00
Huacai Chen 719d109b7f hw/mips: Implement the kvm_type() hook in MachineClass
MIPS has two types of KVM: TE & VZ, and TE is the default type. Now we
can't create a VZ guest in QEMU because it lacks the kvm_type() hook in
MachineClass. This patch add the the kvm_type() hook to support both of
the two types.

[AM: Added "if defined" guards.]

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1592995531-32600-2-git-send-email-chenhc@lemote.com>
2020-06-27 19:35:39 +02:00
Peter Maydell 553cf5d7c4 target-arm queue:
* hw/arm/aspeed: improve QOM usage
  * hw/misc/pca9552: trace GPIO change events
  * target/arm: Implement ARMv8.5-MemTag for system emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl72EJcZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pFyEACkbCVp4G+L5152dVbuACEM
 pIIINMusEj8Liyx9HRv6K0QnK2+Vd9OITx0lzxER36FrHumgDEXtjWOTJnnJiUbM
 wCLsVuSMybh01UtyI6bDyl0H8wb5uctrnow/UKQTOAPaucQQoss6Wq17z5xJ/gKT
 aNDW4rPrAfdqAWbd/Pd4Z2YMaI3JzUDofj4ea5kcmYZI8lP7nfGI+nVgC02a8S7z
 GVAxhLmTIXBMJDiwBQcW33qiUQOhVvEZWo2u72uTb8eTRhHz4lsVSm6VnHZCCaXN
 Q1lIknJWYhN/g3JE/2RQZXEV4f8imjUau3j+U6CZmftD/kYU9a9CInX0feP3Tjb1
 OCfNezvtD6KLXsJmYsrqjOe0FwJFck2gWcesamr7WJ3lzLI/V3VDmRahwc7hwp4o
 29F5cJ3uhICVDTrDyGQ4rW7qhDaoeqo6F+kwPI1cmiGexDUPhDyIQ1UwGRkSRllN
 scWeTyET6aI7AB1iwYitJZ6wQ3fmymZYhbZa0BMPVn4U/pV58uMhNQ9MZ1K+g7NQ
 /d24jWSmZFyhGqqKaXSlFFTDon4rglov2JgXcsktrfG5GAzjKgXaFtnqE4qURiJ3
 0MRzc/s6WcMWvy1adBbZNwgFWx1KIZuW8eXn6o8Ghpl+X/4y1zCEkMPJyFCgQr59
 lp3WtCOCzGOOKP0T/slNyg==
 =uHRc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200626' into staging

target-arm queue:
 * hw/arm/aspeed: improve QOM usage
 * hw/misc/pca9552: trace GPIO change events
 * target/arm: Implement ARMv8.5-MemTag for system emulation

# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
  target/arm: Enable MTE
  target/arm: Add allocation tag storage for system mode
  target/arm: Create tagged ram when MTE is enabled
  target/arm: Cache the Tagged bit for a page in MemTxAttrs
  target/arm: Always pass cacheattr to get_phys_addr
  target/arm: Set PSTATE.TCO on exception entry
  target/arm: Implement data cache set allocation tags
  target/arm: Complete TBI clearing for user-only for SVE
  target/arm: Add mte helpers for sve scatter/gather memory ops
  target/arm: Handle TBI for sve scalar + int memory ops
  target/arm: Add mte helpers for sve scalar + int ff/nf loads
  target/arm: Add mte helpers for sve scalar + int stores
  target/arm: Add mte helpers for sve scalar + int loads
  target/arm: Add arm_tlb_bti_gp
  target/arm: Tidy trans_LD1R_zpri
  target/arm: Use mte_check1 for sve LD1R
  target/arm: Use mte_checkN for sve unpredicated stores
  target/arm: Use mte_checkN for sve unpredicated loads
  target/arm: Add helper_mte_check_zva
  target/arm: Implement helper_mte_checkN
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 18:22:36 +01:00
Peter Maydell 3591ddd399 * Various fixes
* libdaxctl support to correctly align devdax character devices (Jingqi)
 * initial-all-set support for live migration (Jay)
 * forbid '-numa node, mem' for 5.1 and newer machine types (Igor)
 * x87 fixes (Joseph)
 * Tighten memory_region_access_valid (Michael) and fix fallout (myself)
 * Replay fixes (Pavel)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl71+zkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroO4MAgAo/aPLzCXJTzFOP88TclEETfSUeyG
 GFs6mAEJpoNnkAzY+y6ZIjtbp346UZB2KMxHTQcd7p2tO+jXSDPpr0UBLqU95j0/
 ucOnP1X9E5ee8P5Z7bXeGCtkfEippI5/TU+gHlx/SKeyVHdMKBsWCg/9LN5JXMJR
 ncQ6MxkU8huOksOLL32dxh1OqtdDiBoq9rswmHFXwDcRuIkteTlQo3Ze9BSb8t04
 7ZImKXNr+wIaq/xXAqltYNGhHoi31Rz+W8W7T84tYNr7wI1LWaLi2jzQ2qJthAdq
 25zXVz5QJjcfIemlrV03PN8IZfKqTfnOvf+DNW1ns/EdflQem/Mb0Q9KOg==
 =NfSA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Various fixes
* libdaxctl support to correctly align devdax character devices (Jingqi)
* initial-all-set support for live migration (Jay)
* forbid '-numa node, mem' for 5.1 and newer machine types (Igor)
* x87 fixes (Joseph)
* Tighten memory_region_access_valid (Michael) and fix fallout (myself)
* Replay fixes (Pavel)

# gpg: Signature made Fri 26 Jun 2020 14:42:17 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (31 commits)
  i386: Mask SVM features if nested SVM is disabled
  ibex_uart: fix XOR-as-pow
  vmport: move compat properties to hw_compat_5_0
  hyperv: vmbus: Remove the 2nd IRQ
  kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling
  numa: forbid '-numa node, mem' for 5.1 and newer machine types
  osdep: Make MIN/MAX evaluate arguments only once
  target/i386: Add notes for versioned CPU models
  target/i386: reimplement fpatan using floatx80 operations
  target/i386: reimplement fyl2x using floatx80 operations
  target/i386: reimplement fyl2xp1 using floatx80 operations
  target/i386: reimplement fprem, fprem1 using floatx80 operations
  softfloat: return low bits of quotient from floatx80_modrem
  softfloat: do not set denominator high bit for floatx80 remainder
  softfloat: do not return pseudo-denormal from floatx80 remainder
  softfloat: fix floatx80 remainder pseudo-denormal check for zero
  softfloat: merge floatx80_mod and floatx80_rem
  target/i386: reimplement f2xm1 using floatx80 operations
  xen: Actually fix build without passthrough
  Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 16:55:20 +01:00
Eduardo Habkost 730319aef0 i386: Mask SVM features if nested SVM is disabled
QEMU incorrectly validates FEAT_SVM feature flags against
GET_SUPPORTED_CPUID even if SVM features are being masked out by
cpu_x86_cpuid().  This can make QEMU print warnings on most AMD
CPU models, even when SVM nesting is disabled (which is the
default).

This bug was never detected before because of a Linux KVM bug:
until Linux v5.6, KVM was not filtering out SVM features in
GET_SUPPORTED_CPUID when nested was disabled.  This KVM bug was
fixed in Linux v5.7-rc1, on Linux commit a50718cc3f43 ("KVM:
nSVM: Expose SVM features to L1 iff nested is enabled").

Fix the problem by adding a CPUID_EXT3_SVM dependency to all
FEAT_SVM feature flags in the feature_dependencies table.

Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200623230116.277409-1-ehabkost@redhat.com>
[Fix testcase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:40 -04:00
Paolo Bonzini c8d7fd059d ibex_uart: fix XOR-as-pow
The xor-as-pow warning in clang actually detected a genuine bug.
Fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:40 -04:00
Paolo Bonzini f983ff95f4 vmport: move compat properties to hw_compat_5_0
The patches that introduced the properties were submitted when QEMU 5.0
had not been released yet, so they got merged under the wrong heading.
Move them to hw_compat_5_0 so that 5.0 machine types get the pre-patch
behavior.

Fixes: b889212973 ("hw/i386/vmport: Propagate IOPort read to vCPU EAX register")
Fixes: 0342ee761e ("hw/i386/vmport: Set EAX to -1 on failed and unsupported commands")
Fixes: f8bdc55037 ("hw/i386/vmport: Report vmware-vmx-type in CMD_GETVERSION")
Fixes: aaacf1c15a ("hw/i386/vmport: Add support for CMD_GETBIOSUUID")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:40 -04:00
Jon Doron 8f06f22f38 hyperv: vmbus: Remove the 2nd IRQ
It seems like Windows does not really require 2 IRQs to have a
functioning VMBus.

Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200617160904.681845-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:40 -04:00
Marcelo Tosatti 74aaddc628 kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling
The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).

So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.

Allow a conservative 250ppm error between host TSC and VM TSC frequencies,
rather than requiring an exact match. NTP daemon in the guest can
correct this difference.

Also change migration to accept this bound.

KVM_SET_TSC_KHZ depends on a kernel interface change. Without this change,
the behaviour remains the same: in case of a different frequency
between host and VM, KVM_SET_TSC_KHZ will fail and QEMU will exit.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Message-Id: <20200616165805.GA324612@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:40 -04:00
Igor Mammedov 32a354dc6c numa: forbid '-numa node, mem' for 5.1 and newer machine types
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a.  Disable legacy option for new machine
types (since 5.1) and amend documentation.

'-numa node,memdev' shall be used instead of disabled option
with new machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Eric Blake f9919116b8 osdep: Make MIN/MAX evaluate arguments only once
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road.  At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html

Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).

However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants.  By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.

Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).

I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use.  As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:

Use of MIN when MIN_CONST is needed:

In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
  249 |     ({                                                  \
      |     ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
   92 | char array[MIN(1, 2)] = "";
      |            ^~~

Use of MIN_CONST when MIN is needed:

/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
 1225 |             i = MIN_CONST(i, n);
      |               ^

Use of MIN in the preprocessor:

In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
  249 |     ({                                                  \
      |      ^

Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros.  cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.

It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Tao Xu 47f0d11d21 target/i386: Add notes for versioned CPU models
Add which features are added or removed in this version.

Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200324051034.30541-1-tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Joseph Myers ff57bb7b63 target/i386: reimplement fpatan using floatx80 operations
The x87 fpatan emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation.  Reimplement using the soft-float operations, as
for other such instructions.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>

Message-Id: <alpine.DEB.2.21.2006230000340.24721@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Joseph Myers 1f18a1e6ab target/i386: reimplement fyl2x using floatx80 operations
The x87 fyl2x emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation.  Reimplement using the soft-float operations,
building on top of the reimplementation of fyl2xp1 and factoring out
code to be shared between the two instructions.

The included test assumes that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematically exact result (including that it should be exact, in the
exact cases which cover more cases than for fyl2xp1).

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006172321530.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Joseph Myers 5eebc49d2d target/i386: reimplement fyl2xp1 using floatx80 operations
The x87 fyl2xp1 emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (adding 1 then using log rather than
attempting a better emulation using log1p).

Reimplement using the soft-float operations, as was done for f2xm1; as
in that case, m68k has related operations but not exactly this one and
it seemed safest to implement directly rather than reusing the m68k
code to avoid accumulation of errors.

A test is included with many randomly generated inputs.  The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of y * log2(x + 1); the implementation aims to do
somewhat better than that (about 70 correct bits before rounding).  I
haven't investigated how accurate hardware is.

Intel manuals describe a narrower range of valid arguments to this
instruction than AMD manuals.  The implementation accepts the wider
range (it's needed anyway for the core code to be reusable in a
subsequent patch reimplementing fyl2x), but the test only has inputs
in the narrower range so that it's valid on hardware that may reject
or produce poor results for inputs outside that range.

Code in the previous implementation that sets C2 for some out-of-range
arguments is not carried forward to the new implementation; C2 is
undefined for this instruction and I suspect that code was just
cut-and-pasted from the trigonometric instructions (fcos, fptan, fsin,
fsincos) where C2 *is* defined to be set for out-of-range arguments.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>

Message-Id: <alpine.DEB.2.21.2006172320190.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers 5ef396e2ba target/i386: reimplement fprem, fprem1 using floatx80 operations
The x87 fprem and fprem1 emulation is currently based around
conversion to double, which is inherently unsuitable for a good
emulation of any floatx80 operation.  Reimplement using the soft-float
floatx80 remainder operations.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081657200.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers 445810ec91 softfloat: return low bits of quotient from floatx80_modrem
Both x87 and m68k need the low parts of the quotient for their
remainder operations.  Arrange for floatx80_modrem to track those bits
and return them via a pointer.

The architectures using float32_rem and float64_rem do not appear to
need this information, so the *_rem interface is left unchanged and
the information returned only from floatx80_modrem.  The logic used to
determine the low 7 bits of the quotient for m68k
(target/m68k/fpu_helper.c:make_quotient) appears completely bogus (it
looks at the result of converting the remainder to integer, the
quotient having been discarded by that point); this patch does not
change that, but the m68k maintainers may wish to do so.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656500.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers 566601f1f9 softfloat: do not set denominator high bit for floatx80 remainder
The floatx80 remainder implementation unnecessarily sets the high bit
of bSig explicitly.  By that point in the function, arguments that are
invalid, zero, infinity or NaN have already been handled and
subnormals have been through normalizeFloatx80Subnormal, so the high
bit will already be set.  Remove the unnecessary code.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656220.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers b662495dca softfloat: do not return pseudo-denormal from floatx80 remainder
The floatx80 remainder implementation sometimes returns the numerator
unchanged when the denominator is sufficiently larger than the
numerator.  But if the value to be returned unchanged is a
pseudo-denormal, that is incorrect.  Fix it to normalize the numerator
in that case.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081655520.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers 499a2f7b55 softfloat: fix floatx80 remainder pseudo-denormal check for zero
The floatx80 remainder implementation ignores the high bit of the
significand when checking whether an operand (numerator) with zero
exponent is zero.  This means it mishandles a pseudo-denormal
representation of 0x1p-16382L by treating it as zero.  Fix this by
checking the whole significand instead.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081655180.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:38 -04:00
Joseph Myers 6b8b0136ab softfloat: merge floatx80_mod and floatx80_rem
The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer.  This is also useful for emulating the x87 fprem
and fprem1 instructions.  Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.

There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:37 -04:00
Joseph Myers eca30647fc target/i386: reimplement f2xm1 using floatx80 operations
The x87 f2xm1 emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (computing with pow and then
subtracting 1 rather than attempting a better emulation using expm1).

Reimplement using the soft-float operations, including additions and
multiplications with higher precision where appropriate to limit
accumulation of errors.  I considered reusing some of the m68k code
for transcendental operations, but the instructions don't generally
correspond exactly to x87 operations (for example, m68k has 2^x and
e^x - 1, but not 2^x - 1); to avoid possible accumulation of errors
from applying multiple such operations each rounding to floatx80
precision, I wrote a direct implementation of 2^x - 1 instead.  It
would be possible in principle to make the implementation more
efficient by doing the intermediate operations directly with
significands, signs and exponents and not packing / unpacking floatx80
format for each operation, but that would make it significantly more
complicated and it's not clear that's worthwhile; the m68k emulation
doesn't try to do that.

A test is included with many randomly generated inputs.  The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of 2^x - 1; the implementation aims to do somewhat
better than that (about 70 correct bits before rounding).  I haven't
investigated how accurate hardware is.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>

Message-Id: <alpine.DEB.2.21.2006112341010.18393@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:37 -04:00
Anthony PERARD b00de3a51f xen: Actually fix build without passthrough
Fix typo.

Fixes: acd0c9416d ("xen: fix build without pci passthrough")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200619103115.254127-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:37 -04:00
Liao Pingfang c13dba2c77 Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"
We need install qemu-[qmp/ga]-ref.* files into the subdirectory of qemu docs: interop.

If we visit the following address and click the link to qemu-qmp-ref.html:
https://www.qemu.org/docs/master/interop/bitmaps.html#basic-qmp-usage

It will report following error:
"
Not Found
The requested URL /docs/master/interop/qemu-qmp-ref.html was not found on this server.
"

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1591663670-47712-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:37 -04:00
Thomas Huth ee760ac80a hw/scsi/megasas: Fix possible out-of-bounds array access in tracepoints
Some tracepoints in megasas.c use a guest-controlled value as an index
into the mfi_frame_desc[] array. Thus a malicious guest could cause an
out-of-bounds error here. Fortunately, the impact is very low since this
can only happen when the corresponding tracepoints have been enabled
before, but the problem should be fixed anyway with a proper check.

Buglink: https://bugs.launchpad.net/qemu/+bug/1882065
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200615072629.32321-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:37 -04:00
Jingqi Liu 5f509751f7 docs/nvdimm: add description of alignment requirement of device dax
For device dax (e.g., /dev/dax0.0), the NUM of 'align=NUM' option
needs to match the alignment requirement of the device dax.
It must be larger than or equal to the 'align' of device dax.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20200429085011.63752-3-jingqi.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:36 -04:00
Richard Henderson c7459633ba target/arm: Enable MTE
We now implement all of the components of MTE, without actually
supporting any tagged memory.  All MTE instructions will work,
trivially, so we can enable support.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:32:24 +01:00
Richard Henderson e4d5bf4fbd target/arm: Add allocation tag storage for system mode
Look up the physical address for the given virtual address,
convert that to a tag physical address, and finally return
the host address that backs it.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-45-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00
Richard Henderson 8bce44a2f6 target/arm: Create tagged ram when MTE is enabled
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200626033144.790098-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00
Richard Henderson 337a03f07f target/arm: Cache the Tagged bit for a page in MemTxAttrs
This "bit" is a particular value of the page's MemAttr.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00
Richard Henderson 7e98e21c09 target/arm: Always pass cacheattr to get_phys_addr
We need to check the memattr of a page in order to determine
whether it is Tagged for MTE.  Between Stage1 and Stage2,
this becomes simpler if we always collect this data, instead
of occasionally being presented with NULL.

Use the nonnull attribute to allow the compiler to check that
all pointer arguments are non-null.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00
Richard Henderson 34669338bd target/arm: Set PSTATE.TCO on exception entry
D1.10 specifies that exception handlers begin with tag checks overridden.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00