Will be needed so there is a defined serial number for
information queries via the Switch CCI.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913133615.29876-1-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support these decoders in CXL host bridges (pxb-cxl), CXL Switch USP
and CXL Type 3 end points.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid having the size of the per HDM decoder register block
repeated in lots of places, create the register definitions for HDM
decoder 1 and use the offset between the first registers in HDM decoder 0 and
HDM decoder 1 to establish the offset.
Calculate in each function as this is more obvious and leads to shorter
line lengths than a single #define which would need a long name
to be specific enough.
Note that the code currently only supports one decoder, so the bugs this
fixes don't actually affect anything.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230913132523.29780-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As an encoded version of these key configuration parameters is available
in a register, provide functions to extract it again so as to avoid
the need for duplicating the storage.
Whilst here update the _enc() function to include additional values
as defined in the CXL 3.0 specification. Whilst they are not
currently used in the emulation, they may be in future and it is
easier to compare with the specification if all values are covered.
Add a spec reference for cxl_interleave_ways_enc() for consistency
with the target count equivalent (and because it's nice to know where
the magic numbers come from).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no strong justification for keeping these in the header
so push them down into the associated cxl-component-utils.c file.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230913132523.29780-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not zeroing it causes a SIGSEGV if the live migration is cancelled, at
net device restart.
This is caused because CVQ tries to reuse the iova_tree that is present
in the first vhost_vdpa device at the end of vhost_vdpa_net_cvq_start.
As a consequence, it tries to access an iova_tree that has been already
free.
Fixes: 00ef422e9f ("vdpa net: move iova tree creation from init to start")
Reported-by: Yanhui Ma <yama@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230913123408.2819185-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
gcc 13.2.1 emits the following warning:
net/vhost-vdpa.c: In function ‘net_vhost_vdpa_init.constprop’:
net/vhost-vdpa.c:1394:25: error: ‘cvq_isolated’ may be used uninitialized [-Werror=maybe-uninitialized]
1394 | s->cvq_isolated = cvq_isolated;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
net/vhost-vdpa.c:1355:9: note: ‘cvq_isolated’ was declared here
1355 | int cvq_isolated;
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230911215435.4156314-1-stefanha@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bit positions of both registers are related. Tracing the registers
independently results in the same offsets across these registers which
eases debugging.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMI command port is currently hardcoded by means of the ACPI_PORT_SMI_CMD
macro. This hardcoding is Intel specific and doesn't match VIA, for example.
There is already the AcpiFadtData::smi_cmd attribute which is used when building
the FADT. Let's also use it when building the DSDT which confines SMI command
port determination to just one place. This allows it to become a property later,
thus resolving the Intel assumption.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-7-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that TYPE_ACPI_GED_X86 doesn't assign AcpiDeviceIfClass::madt_cpu any more
it is the same as TYPE_ACPI_GED.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "hw/boards.h" is unused since the previous commit. Since its removal
requires include fixes in various unrelated files to keep the code compiling it
has been split in a dedicated commit.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-5-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As noted in the comment, the PCI INTx lines are supposed to be routed
to *both* the PIC and the I/O APIC. It's just that we don't cope with
the concept of an IRQ being asserted to two *different* pins on the
two irqchips.
So we have this hack of routing to I/O APIC only if the PIRQ routing to
the PIC is disabled. Which seems to work well enough, even when I try
hard to break it with kexec. But should be explicitly documented and
understood.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <112a09643b8191c4eae7d92fa247a861ab90a9ee.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new vhost-user protocol feature to vhost-user protocol feature map
and enumeration:
- VHOST_USER_PROTOCOL_F_STATUS
Add new virtio device features for several virtio devices to their
respective feature mappings:
virtio-blk:
- VIRTIO_BLK_F_SECURE_ERASE
virtio-net:
- VIRTIO_NET_F_NOTF_COAL
- VIRTIO_NET_F_GUEST_USO4
- VIRTIO_NET_F_GUEST_USO6
- VIRTIO_NET_F_HOST_USO
virtio/vhost-user-gpio:
- VIRTIO_GPIO_F_IRQ
- VHOST_USER_F_PROTOCOL_FEATURES
Add support for introspection on vhost-user-gpio devices.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-3-jonah.palmer@oracle.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio_list duplicates information about virtio devices that already
exist in the QOM composition tree. Instead of creating this list of
realized virtio devices, search the QOM composition tree instead.
This patch modifies the QMP command qmp_x_query_virtio to instead
recursively search the QOM composition tree for devices of type
'TYPE_VIRTIO_DEVICE'. The device is also checked to ensure it's
realized.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230926224107.2951144-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches in this series will no longer perform an
immediate poll and check of the device's used buffers
for each CVQ state load command. Instead, they will
send CVQ state load commands in parallel by polling
multiple pending buffers at once.
To achieve this, this patch refactoring vhost_svq_poll()
to accept a new argument `num`, which allows vhost_svq_poll()
to wait for the device to use multiple elements,
rather than polling for a single element.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <950b3bfcfc5d446168b9d6a249d554a013a691d4.1693287885.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have add migration blockers if the device does not support
all the needed features, remove the general blocker applied to all net
devices with CVQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Doing that way allows CVQ to be enabled before the dataplane vqs,
restoring the state as MQ or MAC addresses properly in the case of a
migration.
The patch does it by defining a ->load NetClientInfo callback also for
dataplane. Ideally, this should be done by an independent patch, but
the function is already static so it would only add an empty
vhost_vdpa_net_data_load stub.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230822085330.3978829-5-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add the corresponding data load.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-vdpa net backend needs to enable vrings in a different order
than default, so export it.
No functional change intended except for tracing, that now includes the
(virtio) index being enabled and the return value of the ioctl.
Still ignoring return value of this function if called from
vhost_vdpa_dev_start, as reorganize calling code around it is out of
the scope of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous to this patch the only way CVQ would be shadowed is if it does
support to isolate CVQ group or if all vqs were shadowed from the
beginning. The second condition was checked at the beginning, and no
more configuration was done.
After this series we need to check if data queues are shadowed because
they are in the middle of the migration. As checking if they are
shadowed already covers the previous case, let's just mimic it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230822085330.3978829-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Lots of virtio functions that are on a hot path in data transmission
are initializing indirect descriptor cache at the point of stack
allocation. It's a 112 byte structure that is getting zeroed out on
each call adding unnecessary overhead. It's going to be correctly
initialized later via special init function. The only reason to
actually initialize right away is the ability to safely destruct it.
Replacing a designated initializer with a function to only initialize
what is necessary.
Removal of the unnecessary stack initializations improves throughput
of virtio-net devices in terms of 64B packets per second by 6-14 %
depending on the case. Tested with a proposed af-xdp network backend
and a dpdk testpmd application in the guest, but should be beneficial
for other virtio devices as well.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Message-Id: <20230811143423.3258788-1-i.maximets@ovn.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable SVQ with VIRTIO_NET_F_CTRL_VLAN feature.
Co-developed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <38dc63102a42c31c72fd293d0e6e2828fd54c86e.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces vhost_vdpa_net_load_single_vlan()
and vhost_vdpa_net_load_vlan() to restore the vlan
filtering state at device's startup.
Co-developed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <e76a29f77bb3f386e4a643c8af94b77b775d1752.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa shadowed CVQ needs to know the maximum number of
vlans supported by the virtio-net device, so QEMU can restore
the VLAN state in a migration.
Co-developed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <ca03403319c6405ea7c400836a572255bbc9ceba.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function is called after virtio_load, so all vlan configuration is
lost in migration case.
Just allow all the vlan-tagged packets if vlan is not configured, and
trust device reset to clear all filtered vlans.
Fixes: 0b1eaa8803 ("virtio-net: Do not filter VLANs without F_CTRL_VLAN")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <95af0d013281282f48ad3f47f6ad1ac4ca9e52eb.1690106284.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To use the generic device the user will need to provide the config
region size via the command line. We also add a notifier so the guest
can be pinged if the remote daemon updates the config.
With these changes:
-device vhost-user-device-pci,virtio-id=41,num_vqs=2,config_size=8
is equivalent to:
-device vhost-user-gpio-pci
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-11-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In theory we shouldn't need to repeat so much boilerplate to support
vhost-user backends. This provides a generic vhost-user-base QOM
object and a derived vhost-user-device for which the user needs to
provide the few bits of information that aren't currently provided by
the vhost-user protocol. This should provide a baseline implementation
from which the other vhost-user stub can specialise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230710153522.3469097-8-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit de6cd7599b ("meson: Replace softmmu_ss
-> system_ss"), rename the virtio source set common to all
system emulation as 'system_virtio_ss[]'. This is clearer
because softmmu can be used for user emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710100510.84862-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous commit removed the dependencies on the
target-specific TARGET_PAGE_FOO macros. We can now
move vhost-vdpa.c to the 'softmmu_virtio_ss' source
set to build it once for all our targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710100432.84819-1-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Similarly to commit e414ed2c47 ("virtio-iommu: Use
target-agnostic qemu_target_page_mask"), Replace the
target-specific TARGET_PAGE_SIZE and TARGET_PAGE_MASK
definitions by a call to the runtime qemu_target_page_size()
helper which is target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230710094931.84402-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use TARGET_PAGE_SIZE to calculate TARGET_PAGE_ALIGN
(see the rationale in previous commits).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Propagate TARGET_PAGE_MASK (see the previous commit for
rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to make vhost-vdpa.c a target-agnostic source unit,
we need to remove the TARGET_PAGE_SIZE / TARGET_PAGE_MASK /
TARGET_PAGE_ALIGN uses. TARGET_PAGE_SIZE will be replaced by
the runtime qemu_target_page_size(). The other ones will be
deduced from TARGET_PAGE_SIZE.
Since the 3 macros are used in 3 related functions (sharing
the same call tree), we'll refactor them to only depend on
TARGET_PAGE_MASK.
Having the following call tree:
vhost_vdpa_listener_region_del()
-> vhost_vdpa_listener_skipped_section()
-> vhost_vdpa_section_end()
The first step is to propagate TARGET_PAGE_MASK to
vhost_vdpa_listener_skipped_section().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230710094931.84402-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
current code sets PCI_SEC_LATENCY_TIMER to RW, but for
pcie to pcie bridges it must be RO 0 according to
pci express spec which says:
This register does not apply to PCI Express. It must be read-only
and hardwired to 00h. For PCI Express to PCI/PCI-X Bridges, refer to the
[PCIe-to-PCI-PCI-X-Bridge] for requirements for this register.
also, fix typo in comment where it's made writeable - this typo
is likely what prevented us noticing we violate this requirement
in the 1st place.
Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-Id: <de9d05366a70172e1789d10591dbe59e39c3849c.1693432039.git.mst@redhat.com>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Simplify the NIC init code of the jazz machine a little bit
* Minor qtest and avocado fixes
-----BEGIN PGP SIGNATURE-----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=FioB
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-09-25' of https://gitlab.com/thuth/qemu into staging
* Make keyutils independent from keyring in meson.build
* Simplify the NIC init code of the jazz machine a little bit
* Minor qtest and avocado fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmURS8gRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbVn4A/+NQKFZcN7gVn5JXkK7kf6i01LNmAoqjj9
# QeQL+WCoNC68OApw7DxIEnpBYT0G42NTHHx4SYeOvzJUzCpeWcxYzQUz58ObZML7
# +OKsiOsaHu3/qOuihBCn43et6moLdDCWbee5Zr6JQv/Fjn3q3nEQZnJDWdw8vm1v
# csYQJZOD6HelLVMmbLfl1szzrykDTT53NhPncH/SjPz6we17sKqHqmT6LBUIsXcV
# u2LaowppKmT7Ooexu6SmsCagLhtWuYo1iGGcRqoojtRWo7eZtWLrAy2DJpyFkPBW
# AIYBfntRISZv4eBGCxcVfvODD/Q4OXHuYTfGzD3m+ELJ6hUk/+d4/aHJ2hm+KEm+
# AD0IpDtimaEmyQTPlaWHhhEur/82JZ+zYlxUMPf3+hglB/rbr6fhA0SMAV6nwR0r
# N8jnB8UCml9oDxJVvDZyrcPMGFs1xlr5FVSHHEoL338SvSfjG3NOEtcNao9n6A8d
# rO2CfPzI7peQhKWAzJL+qpnmenyIniH23tFnf2mpOZ0g45ZWtJeT0CXL3aQO3XAZ
# m56pkM0d/etAHHRoLQ5D/iKZpwiTRLjdzsJ0gMAQsIuRlG/j5h+zou0vUMgm6F8F
# igRHLxytlywZBTCABm2XIlKmaJp8hQlVQMpKsv/BwzTvzzk0GGS5d1qzzFt5WWR7
# 4rSalTn5Xuw=
# =FioB
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Sep 2023 04:58:48 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-09-25' of https://gitlab.com/thuth/qemu:
tests/avocado: fix waiting for vm shutdown in replay_linux
hw/mips/jazz: Simplify the NIC setup code
hw/mips/jazz: Move the NIC init code into a separate function
tests/qtest/netdev-socket: Do not test multicast on Darwin
tests/qtest/m48t59-test: Silence compiler warning with -Wshadow
tests/qtest/netdev-socket: Raise connection timeout to 120 seconds
meson.build: Make keyutils independent from keyring
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes the race condition in waiting for shutdown
of the replay linux test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Suggested-by: John Snow <jsnow@redhat.com>
Message-ID: <20230811070608.3383343-4-pavel.dovgalyuk@ispras.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The for-loop does not make much sense here - it is always left after
the first iteration, so we can also check for nb_nics == 1 instead
which is way easier to understand.
Also, the checks for nd->model are superfluous since the code in
mips_jazz_init_net() calls qemu_check_nic_model() that already
takes care of this (i.e. initializing nd->model if it has not been
set yet, and checking whether it is the "help" option or the
supported NIC model).
Message-ID: <20230913160922.355640-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The mips_jazz_init() function is already quite big, so moving
away some code here can help to make it more understandable.
Additionally, by moving this code into a separate function, the
next patch (that will refactor the for-loop around the NIC init
code) will be much shorter and easier to understand.
Message-ID: <20230913160922.355640-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Do not run this test on Darwin, otherwise we get:
qemu-system-arm: -netdev dgram,id=st0,remote.type=inet,remote.host=230.0.0.1,remote.port=1234:
can't add socket to multicast group 230.0.0.1: Can't assign requested address
Broken pipe
../../tests/qtest/libqtest.c:191: kill_qemu() tried to terminate QEMU
process but encountered exit status 1 (expected 0)
Abort trap: 6
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230918062549.2363-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling this file with -Wshadow=local , we get:
../tests/qtest/m48t59-test.c: In function ‘bcd_check_time’:
../tests/qtest/m48t59-test.c:195:17: warning: declaration of ‘s’
shadows a previous local [-Wshadow=local]
195 | long t, s;
| ^
../tests/qtest/m48t59-test.c:158:17: note: shadowed declaration is here
158 | QTestState *s = m48t59_qtest_start();
| ^
Rename the QTestState variable to "qts" which is the common
naming for such a variable in other tests.
Reported-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20230922163742.149444-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 0db0fbb5cf ("Add conditional dependency for libkeyutils")
tried to provide a possibility for the user to disable keyutils
if not required by makeing it depend on the keyring feature. This
looked reasonable at a first glance (the unit test in tests/unit/
needs both), but the condition in meson.build fails if the feature
is meant to be detected automatically, and there is also another
spot in backends/meson.build where keyutils is used independently
from keyring. So let's remove the dependency on keyring again and
introduce a proper meson build option instead.
Cc: qemu-stable@nongnu.org
Fixes: 0db0fbb5cf ("Add conditional dependency for libkeyutils")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1842
Message-ID: <20230824094208.255279-1-thuth@redhat.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
