Add the missing 64-bit hppa firmware blob so that it gets installed.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 7c0dfcf939 ("target/hppa: Update SeaBIOS-hppa to version 16")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When calculating the IOR for the exception handlers, the current
unwind_breg value is needed on 64-bit hppa machines.
Restore that value by calling cpu_restore_state() earlier, which in turn
calls hppa_restore_state_to_opc() which restores the unwind_breg for the
current instruction.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 3824e0d643 ("target/hppa: Export function hppa_set_ior_and_isr()")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Unaligned 64-bit accesses were found in Linux to clobber carry bits,
resulting in bad results if an arithmetic operation involving a
carry bit was executed after an unaligned 64-bit operation.
hppa 2.0 defines additional carry bits in PSW register bits 32..39.
When restoring PSW after executing an unaligned instruction trap, those
bits were not cleared and ended up to be active all the time. Since there
are no bits other than the upper carry bits needed in the upper 32 bit of
env->psw and since those are stored in env->psw_cb, just clear the entire
upper 32 bit when storing psw to solve the problem unconditionally.
Fixes: 931adff314 ("target/hppa: Update cpu_hppa_get/put_psw for hppa64")
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Add a regression test for a recently fixed issue, where shmat()
desynced the guest and the host view of the address space and caused
open("/proc/self/maps") to SEGV.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <jwyuvao4apydvykmsnvacwshdgy3ixv7qvkh4dbxm3jkwgnttw@k4wpaayou7oq>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Fix GIC settings when using --without-default-devices
* Fix USB PCAP streams on Windows
* Remove temporary files from test-util-sockets
* Fix TLS io channels sending too much data to the backend
-----BEGIN PGP SIGNATURE-----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=9JAI
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu into staging
* Fix some bugs in the vring setup of libqos
* Fix GIC settings when using --without-default-devices
* Fix USB PCAP streams on Windows
* Remove temporary files from test-util-sockets
* Fix TLS io channels sending too much data to the backend
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXhjBcRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWzZw/+OTSsKg6JTX0z3fjL6If+Ns/EnFiniHHI
# y1jR7fPub3ybFokgHIWrRVG+9ol+1tJuPlO5Bsx1SKFzNC8++l1iyK7E25xnmp2P
# Ry/Z0ZSWp3JWCtLm6km5pKl3wWI9p0XwfUOJbCWYM5dOsd2a4C4DSvjcwNXR7pTB
# 4AxXFj5G5UwXuffgPnBzeerm5baNweSqa/uczUY6Od+iJwmHpaSk0SJ4NIlIYvnS
# z3BH81trQAoKYZyywp0aF+jH9w3YNwD1XDp2Bcf3qSWDdokN55V13yyiSllTfUwX
# Lq3fotoLqFJL0A4m8a3TdCKMP8ReoJATSriPHJmGMgqWGTnvtRBIsx1pmMpYRB6U
# EltaKW0WXeQAad0ZYGl4odx7kQUQjdc8HTQRTevQD9g3XpZZN0o9MfTPdM2eR5h6
# xaS8UEc61YJAcmD27Ir92JGGGMLBTYz4OGLx3Rj7l7S759GQ67qih9TGcE9nqSj+
# +wAHfiOjUZnSWnp7Hq4M/TIjNh0BuyBW4oRBASaikjjQ82Hih5bPTdRu1J8lYuXC
# PhN8dLwdk0NMrnnHuFDKq/sXjDeXF3Hg0AmtVvOGiB2z2OeVSPtMxl/YgniGVTbj
# CHXDqDrBAa7i6WxAo+TtUgE20iVz5uYzGqHmxTNpq6FzIRb1uvHksbjFlin79Pkw
# eF0Dj80zxAY=
# =9JAI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 01 Mar 2024 08:04:39 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2024-03-01' of https://gitlab.com/thuth/qemu:
chardev/char-socket: Fix TLS io channels sending too much data to the backend
tests/unit/test-util-sockets: Remove temporary file after test
hw/usb/bus.c: PCAP adding 0xA in Windows version
hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"
libqos/virtio.c: fix 'avail_event' offset in qvring_init()
libqos/virtio.c: init all elems in qvring_indirect_desc_setup()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V2: fix build error on mipsel
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZeBrwAAKCRBAov/yOSY+
33YXA/4+A5Bpe/3+mSAWZSUlluGTqUi0ILBYRMyX1RXovMx4uCRGr7PXzAf03yKS
MZzlVzTuOK69WmTm/iTdYWOxkXisC3gzxL/wm8hP4lzh4c0dHrHRsKHqq6gR3+t2
ojdZn7TefeflnNqIhxXxgxb1OETofhBNnBJ74pvqxO7XV5SWnA==
=J2Kb
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240229
V2: fix build error on mipsel
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZeBrwAAKCRBAov/yOSY+
# 33YXA/4+A5Bpe/3+mSAWZSUlluGTqUi0ILBYRMyX1RXovMx4uCRGr7PXzAf03yKS
# MZzlVzTuOK69WmTm/iTdYWOxkXisC3gzxL/wm8hP4lzh4c0dHrHRsKHqq6gR3+t2
# ojdZn7TefeflnNqIhxXxgxb1OETofhBNnBJ74pvqxO7XV5SWnA==
# =J2Kb
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 29 Feb 2024 11:34:24 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240229' of https://gitlab.com/gaosong/qemu:
loongarch: Change the UEFI loading mode to loongarch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we receive a file descriptor that points to a regular file, there's
nothing stopping us from doing multifd migration with mapped-ram to
that file.
Enable the fd: URI to work with multifd + mapped-ram.
Note that the fds passed into multifd are duplicated because we want
to avoid cross-thread effects when doing cleanup (i.e. close(fd)). The
original fd doesn't need to be duplicated because monitor_get_fd()
transfers ownership to the caller.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-23-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
For the incoming mapped-ram migration we need to read the ramblock
headers, get the pages bitmap and send the host address of each
non-zero page to the multifd channel thread for writing.
Usage on HMP is:
(qemu) migrate_set_capability multifd on
(qemu) migrate_set_capability mapped-ram on
(qemu) migrate_incoming file:migfile
(the ram.h include needs to move because we've been previously relying
on it being included from migration.c. Now file.h will start including
multifd.h before migration.o is processed)
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-22-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The new mapped-ram stream format uses a file transport and puts ram
pages in the migration file at their respective offsets and can be
done in parallel by using the pwritev system call which takes iovecs
and an offset.
Add support to enabling the new format along with multifd to make use
of the threading and page handling already in place.
This requires multifd to stop sending headers and leaving the stream
format to the mapped-ram code. When it comes time to write the data, we
need to call a version of qio_channel_write that can take an offset.
Usage on HMP is:
(qemu) stop
(qemu) migrate_set_capability multifd on
(qemu) migrate_set_capability mapped-ram on
(qemu) migrate_set_parameter max-bandwidth 0
(qemu) migrate_set_parameter multifd-channels 8
(qemu) migrate file:migfile
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-21-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The mapped-ram migration can be performed live or non-live, but it is
always asynchronous, i.e. the source machine and the destination
machine are not migrating at the same time. We only need some pieces
of the multifd sync operations.
multifd_send_sync_main()
------------------------
Issued by the ram migration code on the migration thread, causes the
multifd send channels to synchronize with the migration thread and
makes the sending side emit a packet with the MULTIFD_FLUSH flag.
With mapped-ram we want to maintain the sync on the sending side
because that provides ordering between the rounds of dirty pages when
migrating live.
MULTIFD_FLUSH
-------------
On the receiving side, the presence of the MULTIFD_FLUSH flag on a
packet causes the receiving channels to start synchronizing with the
main thread.
We're not using packets with mapped-ram, so there's no MULTIFD_FLUSH
flag and therefore no channel sync on the receiving side.
multifd_recv_sync_main()
------------------------
Issued by the migration thread when the ram migration flag
RAM_SAVE_FLAG_MULTIFD_FLUSH is received, causes the migration thread
on the receiving side to start synchronizing with the recv
channels. Due to compatibility, this is also issued when
RAM_SAVE_FLAG_EOS is received.
For mapped-ram we only need to synchronize the channels at the end of
migration to avoid doing cleanup before the channels have finished
their IO.
Make sure the multifd syncs are only issued at the appropriate times.
Note that due to pre-existing backward compatibility issues, we have
the multifd_flush_after_each_section property that can cause a sync to
happen at EOS. Since the EOS flag is needed on the stream, allow
mapped-ram to just ignore it.
Also emit an error if any other unexpected flags are found on the
stream.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-20-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
On the receiving side we don't need to differentiate between main
channel and threads, so whichever channel is defined first gets to be
the main one. And since there are no packets, use the atomic channel
count to index into the params array.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-19-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Allow multifd to open file-backed channels. This will be used when
enabling the mapped-ram migration stream format which expects a
seekable transport.
The QIOChannel read and write methods will use the preadv/pwritev
versions which don't update the file offset at each call so we can
reuse the fd without re-opening for every channel.
Contrary to the socket migration, the file migration doesn't need an
asynchronous channel creation process, so expose
multifd_channel_connect() and call it directly.
Note that this is just setup code and multifd cannot yet make use of
the file channels.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-18-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
We'll need to access multifd_send_state->channels_created from outside
multifd.c, so introduce a helper for that.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-17-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Currently multifd does not need to have knowledge of pages on the
receiving side because all the information needed is within the
packets that come in the stream.
We're about to add support to mapped-ram migration, which cannot use
packets because it expects the ramblock section in the migration file
to contain only the guest pages data.
Add a data structure to transfer pages between the ram migration code
and the multifd receiving threads.
We don't want to reuse MultiFDPages_t for two reasons:
a) multifd threads don't really need to know about the data they're
receiving.
b) the receiving side has to be stopped to load the pages, which means
we can experiment with larger granularities than page size when
transferring data.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-16-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
For the upcoming support to the new 'mapped-ram' migration stream
format, we cannot use multifd packets because each write into the
ramblock section in the migration file is expected to contain only the
guest pages. They are written at their respective offsets relative to
the ramblock section header.
There is no space for the packet information and the expected gains
from the new approach come partly from being able to write the pages
sequentially without extraneous data in between.
The new format also simply doesn't need the packets and all necessary
information can be taken from the standard migration headers with some
(future) changes to multifd code.
Use the presence of the mapped-ram capability to decide whether to
send packets.
This only moves code under multifd_use_packets(), it has no effect for
now as mapped-ram cannot yet be enabled with multifd.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-15-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Next patches will abstract the type of data being received by the
channels, so do some cleanup now to remove references to pages and
dependency on 'normal_num'.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-14-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Use a more specific name for the compression data so we can use the
generic for the multifd core code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-13-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the necessary code to parse the format changes for the
'mapped-ram' capability.
One of the more notable changes in behavior is that in the
'mapped-ram' case ram pages are restored in one go rather than
constantly looping through the migration stream.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-11-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Implement the outgoing migration side for the 'mapped-ram' capability.
A bitmap is introduced to track which pages have been written in the
migration file. Pages are written at a fixed location for every
ramblock. Zero pages are ignored as they'd be zero in the destination
migration as well.
The migration stream is altered to put the dirty pages for a ramblock
after its header instead of having a sequential stream of pages that
follow the ramblock headers.
Without mapped-ram (current): With mapped-ram (new):
--------------------- --------------------------------
| ramblock 1 header | | ramblock 1 header |
--------------------- --------------------------------
| ramblock 2 header | | ramblock 1 mapped-ram header |
--------------------- --------------------------------
| ... | | padding to next 1MB boundary |
--------------------- | ... |
| ramblock n header | --------------------------------
--------------------- | ramblock 1 pages |
| RAM_SAVE_FLAG_EOS | | ... |
--------------------- --------------------------------
| stream of pages | | ramblock 2 header |
| (iter 1) | --------------------------------
| ... | | ramblock 2 mapped-ram header |
--------------------- --------------------------------
| RAM_SAVE_FLAG_EOS | | padding to next 1MB boundary |
--------------------- | ... |
| stream of pages | --------------------------------
| (iter 2) | | ramblock 2 pages |
| ... | | ... |
--------------------- --------------------------------
| ... | | ... |
--------------------- --------------------------------
| RAM_SAVE_FLAG_EOS |
--------------------------------
| ... |
--------------------------------
where:
- ramblock header: the generic information for a ramblock, such as
idstr, used_len, etc.
- ramblock mapped-ram header: the new information added by this
feature: bitmap of pages written, bitmap size and offset of pages
in the migration file.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-10-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The mapped-ram migration format needs a channel that supports seeking
to be able to write each page to an arbitrary offset in the migration
stream.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-9-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a new migration capability 'mapped-ram'.
The core of the feature is to ensure that RAM pages are mapped
directly to offsets in the resulting migration file instead of being
streamed at arbitrary points.
The reasons why we'd want such behavior are:
- The resulting file will have a bounded size, since pages which are
dirtied multiple times will always go to a fixed location in the
file, rather than constantly being added to a sequential
stream. This eliminates cases where a VM with, say, 1G of RAM can
result in a migration file that's 10s of GBs, provided that the
workload constantly redirties memory.
- It paves the way to implement O_DIRECT-enabled save/restore of the
migration stream as the pages are ensured to be written at aligned
offsets.
- It allows the usage of multifd so we can write RAM pages to the
migration file in parallel.
For now, enabling the capability has no effect. The next couple of
patches implement the core functionality.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-8-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add utility methods that will be needed when implementing 'mapped-ram'
migration capability.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Link: https://lore.kernel.org/r/20240229153017.2221-7-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Make sure the data is flushed to disk before closing file
channels. This is to ensure data is on disk and not lost in the event
of a host crash.
This is currently being implemented to affect the migration code when
migrating to a file, but all QIOChannelFile users should benefit from
the change.
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Acked-by: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-6-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The upcoming 'mapped-ram' feature will require qemu to write data to
(and restore from) specific offsets of the migration file.
Add a minimal implementation of pwritev/preadv and expose them via the
io_pwritev and io_preadv interfaces.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-5-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Introduce basic pwritev/preadv support in the generic channel layer.
Specific implementation will follow for the file channel as this is
required in order to support migration streams with fixed location of
each ram page.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-4-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Add a generic QIOChannel feature SEEKABLE which would be used by the
qemu_file* apis. For the time being this will be only implemented for
file channels.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Some minor cleanups and documentation for multifd_recv_sync_main.
Use thread_count as done in other parts of the code. Remove p->id from
the multifd_recv_state sync, since that is global and not tied to a
channel. Add documentation for the sync steps.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240229153017.2221-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
Commit ffda5db65a ("io/channel-tls: fix handling of bigger read buffers")
changed the behavior of the TLS io channels to schedule a second reading
attempt if there is still incoming data pending. This caused a regression
with backends like the sclpconsole that check in their read function that
the sender does not try to write more bytes to it than the device can
currently handle.
The problem can be reproduced like this:
1) In one terminal, do this:
mkdir qemu-pki
cd qemu-pki
openssl genrsa 2048 > ca-key.pem
openssl req -new -x509 -nodes -days 365000 -key ca-key.pem -out ca-cert.pem
# enter some dummy value for the cert
openssl genrsa 2048 > server-key.pem
openssl req -new -x509 -nodes -days 365000 -key server-key.pem \
-out server-cert.pem
# enter some other dummy values for the cert
gnutls-serv --echo --x509cafile ca-cert.pem --x509keyfile server-key.pem \
--x509certfile server-cert.pem -p 8338
2) In another terminal, do this:
wget https://download.fedoraproject.org/pub/fedora-secondary/releases/39/Cloud/s390x/images/Fedora-Cloud-Base-39-1.5.s390x.qcow2
qemu-system-s390x -nographic -nodefaults \
-hda Fedora-Cloud-Base-39-1.5.s390x.qcow2 \
-object tls-creds-x509,id=tls0,endpoint=client,verify-peer=false,dir=$PWD/qemu-pki \
-chardev socket,id=tls_chardev,host=localhost,port=8338,tls-creds=tls0 \
-device sclpconsole,chardev=tls_chardev,id=tls_serial
QEMU then aborts after a second or two with:
qemu-system-s390x: ../hw/char/sclpconsole.c:73: chr_read: Assertion
`size <= SIZE_BUFFER_VT220 - scon->iov_data_len' failed.
Aborted (core dumped)
It looks like the second read does not trigger the chr_can_read() function
to be called before the second read, which should normally always be done
before sending bytes to a character device to see how much it can handle,
so the s->max_size in tcp_chr_read() still contains the old value from the
previous read. Let's make sure that we use the up-to-date value by calling
tcp_chr_read_poll() again here.
Fixes: ffda5db65a ("io/channel-tls: fix handling of bigger read buffers")
Buglink: https://issues.redhat.com/browse/RHEL-24614
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240229104339.42574-1-thuth@redhat.com>
Reviewed-by: Antoine Damhet <antoine.damhet@blade-group.com>
Tested-by: Antoine Damhet <antoine.damhet@blade-group.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test-util-sockets leaves the temporary socket files around in the
temporary files folder. Let's better remove them at the end of the
testing.
Fixes: 4d3a329af5 ("tests/util-sockets: add abstract unix socket cases")
Message-ID: <20240226082728.249753-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since Windows text files use CRLFs for all \n, the Windows version of QEMU
inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP
files. This is due to the fact that the PCAP file is opened as TEXT instead
of BINARY.
To show an example, when using a very common protocol to USB disks, the BBB
protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10)
command will have a command block length of 10 (0xA). When this 10-byte
command (part of the 31-byte CBW) is placed into the PCAP file, the Windows
file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a
32-byte CBW.
Actual CBW:
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0a 25 USBC...........%
0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
PCAP CBW
0040 55 53 42 43 01 00 00 00 08 00 00 00 80 00 0d 0a USBC............
0050 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 %..............
I believe simply opening the PCAP file as BINARY instead of TEXT will fix
this issue.
Resolves: https://bugs.launchpad.net/qemu/+bug/2054889
Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net>
Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net>
[thuth: Break long line to avoid checkpatch.pl error]
Signed-off-by: Thomas Huth <thuth@redhat.com>
When using "--without-default-devices", the ARM_GICV3_TCG and ARM_GIC_KVM
settings currently get disabled, though the arm virt machine is only of
very limited use in that case. This also causes the migration-test to
fail in such builds. Let's make sure that we always keep the GIC switches
enabled in the --without-default-devices builds, too.
Message-ID: <20240221110059.152665-1-thuth@redhat.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In qvring_init() we're writing vq->used->avail_event at "vq->used + 2 +
array_size". The struct pointed by vq->used is, from virtio_ring.h
Linux header):
* // A ring of used descriptor heads with free-running index.
* __virtio16 used_flags;
* __virtio16 used_idx;
* struct vring_used_elem used[num];
* __virtio16 avail_event_idx;
So 'flags' is the word right at vq->used. 'idx' is vq->used + 2. We need
to skip 'used_idx' by adding + 2 bytes, and then sum the vector size, to
reach avail_event_idx. An example on how to properly access this field
can be found in qvirtqueue_kick():
avail_event = qvirtio_readw(d, qts, vq->used + 4 +
sizeof(struct vring_used_elem) * vq->size);
This error was detected when enabling the RISC-V 'virt' libqos machine.
The 'idx' test from vhost-user-blk-test.c errors out with a timeout in
qvirtio_wait_used_elem(). The timeout happens because when processing
the first element, 'avail_event' is read in qvirtqueue_kick() as non-zero
because we didn't initialize it properly (and the memory at that point
happened to be non-zero). 'idx' is 0.
All of this makes this condition fail because "idx - avail_event" will
overflow and be non-zero:
/* < 1 because we add elements to avail queue one by one */
if ((flags & VRING_USED_F_NO_NOTIFY) == 0 &&
(!vq->event || (uint16_t)(idx-avail_event) < 1)) {
d->bus->virtqueue_kick(d, vq);
}
As a result the virtqueue is never kicked and we'll timeout waiting for it.
Fixes: 1053587c3f ("libqos: Added EVENT_IDX support")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-3-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The loop isn't setting the values for the last element. Every other
element is being initialized with addr = 0, flags = VRING_DESC_F_NEXT
and next = i + 1. The last elem is never touched.
This became a problem when enabling a RISC-V 'virt' libqos machine in
the 'indirect' test of virti-blk-test.c. The 'flags' for the last
element will end up being an odd number (since we didn't touch it).
Being an odd number it will be mistaken by VRING_DESC_F_NEXT, which
happens to be 1.
Deep into hw/virt/virtio.c, in virtqueue_split_pop(), into
virtqueue_split_read_next_desc(), a check for VRING_DESC_F_NEXT will be
made to see if we're supposed to chain. The code will keep up chaining
in the last element because the uninitialized value happens to be odd.
We'll error out right after that because desc->next (which is also
uninitialized) will be >= max. A VIRTQUEUE_READ_DESC_ERROR will be
returned, with an error message like this in the stderr:
qemu-system-riscv64: Desc next is 49391
Since we never returned, we'll end up timing out at qvirtio_wait_used_elem():
ERROR:../tests/qtest/libqos/virtio.c:236:qvirtio_wait_used_elem:
assertion failed: (g_get_monotonic_time() - start_time <= timeout_us)
The root cause is using uninitialized values from guest_alloc() in
qvring_indirect_desc_setup(). There's no guarantee that the memory pages
retrieved will be zeroed, so we can't make assumptions. In fact, commit
5b4f72f5e8 ("tests/qtest: properly initialise the vring used idx") fixed a
similar problem stating "It is probably not wise to assume guest memory
is zeroed anyway". I concur.
Initialize all elems in qvring_indirect_desc_setup().
Fixes: f294b029aa ("libqos: Added indirect descriptor support to virtio implementation")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-2-dbarboza@ventanamicro.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some glue code was missing, so that using `qmp_migrate_set_parameters`
to set `multifd-zstd-level` or `multifd-zlib-level` did not work. This
commit adds the glue code to fix that.
Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com>
Link: https://lore.kernel.org/r/20240301035901.4006936-2-bryan.zhang@bytedance.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Re-wrap the cpr-reboot documentation to 70 columns, use '@' for
cpr-reboot references, capitalize COLO and VFIO, and tweak the
wording.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Link: https://lore.kernel.org/r/1709218462-3640-1-git-send-email-steven.sistare@oracle.com
[peterx: s/qemu/QEMU per Markus's suggestion]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
The kernel abi was changed with
commit d23b77953f5a4fbf94c05157b186aac2a247ae32
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Wed Jan 17 12:43:08 2024 +0800
LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE
during the v6.8 cycle.
Reviewed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the only case in which we expect to have no host memory backing
for a guest memory page, because in general linux user processes cannot
map any pages in the top half of the 64-bit address space.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2170
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The variables uext_opc and sext_opc are used without initialization if
TCG_TARGET_extract_i{32,64}_valid returns false. The result, depending
on the compiler, might be the generation of extract and sextract opcodes
with invalid offset and count, or just random data in the TCG opcode
stream.
Fixes: ceb9ee06b7 ("tcg/optimize: Handle TCG_COND_TST{EQ,NE}", 2024-02-03)
Cc: Richard Henderson <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240228110641.287205-1-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The assertion was never correct, because the alignment is a composite
of the image alignment and SHMLBA. Even if the image alignment didn't
match the image address, an assertion would not be correct -- more
appropriate would be an error message about an ill formed image. But
the image cannot be held to SHMLBA under any circumstances.
Fixes: ee94743034 ("linux-user: completely re-write init_guest_space")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2157
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Alexey Sheplyakov <asheplyakov@yandex.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since alpha binaries are generally built for multiple
page sizes, it is trivial to allow the page size to vary.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-34-richard.henderson@linaro.org>
Since ppc binaries are generally built for multiple
page sizes, it is trivial to allow the page size to vary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-33-richard.henderson@linaro.org>
Bizzarely, it is possible to set /proc/sys/vm/mmap_min_addr
to a value below the host page size. Fix that.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-32-richard.henderson@linaro.org>
Since aarch64 binaries are generally built for multiple
page sizes, it is trivial to allow the page size to vary.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20240102015808.132373-31-richard.henderson@linaro.org>
