The testcase contains :
- `test_idr_reset_value()` :
Checks the reset values of MODER, OTYPER, PUPDR, ODR and IDR.
- `test_gpio_output_mode()` :
Checks that writing a bit in register ODR results in the corresponding
pin rising or lowering, if this pin is configured in output mode.
- `test_gpio_input_mode()` :
Checks that a input pin set high or low externally results
in the pin rising and lowering.
- `test_pull_up_pull_down()` :
Checks that a floating pin in pull-up/down mode is actually high/down.
- `test_push_pull()` :
Checks that a pin set externally is disconnected when configured in
push-pull output mode, and can't be set externally while in this mode.
- `test_open_drain()` :
Checks that a pin set externally high is disconnected when configured
in open-drain output mode, and can't be set high while in this mode.
- `test_bsrr_brr()` :
Checks that writing to BSRR and BRR has the desired result in ODR.
- `test_clock_enable()` :
Checks that GPIO clock is at the right frequency after enabling it.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240305210444.310665-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Features supported :
- the 8 STM32L4x5 GPIOs are initialized with their reset values
(except IDR, see below)
- input mode : setting a pin in input mode "externally" (using input
irqs) results in an out irq (transmitted to SYSCFG)
- output mode : setting a bit in ODR sets the corresponding out irq
(if this line is configured in output mode)
- pull-up, pull-down
- push-pull, open-drain
Difference with the real GPIOs :
- Alternate Function and Analog mode aren't implemented :
pins in AF/Analog behave like pins in input mode
- floating pins stay at their last value
- register IDR reset values differ from the real one :
values are coherent with the other registers reset values
and the fact that AF/Analog modes aren't implemented
- setting I/O output speed isn't supported
- locking port bits isn't supported
- ADC function isn't supported
- GPIOH has 16 pins instead of 2 pins
- writing to registers LCKR, AFRL, AFRH and ASCR is ineffective
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable all FEAT_ECV features on the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-9-peter.maydell@linaro.org
When ID_AA64MMFR0_EL1.ECV is 0b0010, a new register CNTPOFF_EL2 is
implemented. This is similar to the existing CNTVOFF_EL2, except
that it controls a hypervisor-adjustable offset made to the physical
counter and timer.
Implement the handling for this register, which includes control/trap
bits in SCR_EL3 and CNTHCTL_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-8-peter.maydell@linaro.org
For FEAT_ECV, new registers CNTPCTSS_EL0 and CNTVCTSS_EL0 are
defined, which are "self-synchronized" views of the physical and
virtual counts as seen in the CNTPCT_EL0 and CNTVCT_EL0 registers
(meaning that no barriers are needed around accesses to them to
ensure that reads of them do not occur speculatively and out-of-order
with other instructions).
For QEMU, all our system registers are self-synchronized, so we can
simply copy the existing implementation of CNTPCT_EL0 and CNTVCT_EL0
to the new register encodings.
This means we now implement all the functionality required for
ID_AA64MMFR0_EL1.ECV == 0b0001.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-7-peter.maydell@linaro.org
The functionality defined by ID_AA64MMFR0_EL1.ECV == 1 is:
* four new trap bits for various counter and timer registers
* the CNTHCTL_EL2.EVNTIS and CNTKCTL_EL1.EVNTIS bits which control
scaling of the event stream. This is a no-op for us, because we don't
implement the event stream (our WFE is a NOP): all we need to do is
allow CNTHCTL_EL2.ENVTIS to be read and written.
* extensions to PMSCR_EL1.PCT, PMSCR_EL2.PCT, TRFCR_EL1.TS and
TRFCR_EL2.TS: these are all no-ops for us, because we don't implement
FEAT_SPE or FEAT_TRF.
* new registers CNTPCTSS_EL0 and NCTVCTSS_EL0 which are
"self-sychronizing" views of the CNTPCT_EL0 and CNTVCT_EL0, meaning
that no barriers are needed around their accesses. For us these
are just the same as the normal views, because all our sysregs are
inherently self-sychronizing.
In this commit we implement the trap handling and permit the new
CNTHCTL_EL2 bits to be written.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-6-peter.maydell@linaro.org
Don't allow the guest to write CNTHCTL_EL2 bits which don't exist.
This is not strictly architecturally required, but it is how we've
tended to implement registers more recently.
In particular, bits [19:18] are only present with FEAT_RME,
and bits [17:12] will only be present with FEAT_ECV.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-5-peter.maydell@linaro.org
We prefer the FIELD macro over ad-hoc #defines for register bits;
switch CNTHCTL to that style before we add any more bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-4-peter.maydell@linaro.org
The timer _EL02 registers should UNDEF for invalid accesses from EL2
or EL3 when HCR_EL2.E2H == 0, not take a cp access trap. We were
delivering the exception to EL2 with the wrong syndrome.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-3-peter.maydell@linaro.org
cpu.h has a lot of #defines relating to CPU register fields.
Most of these aren't actually used outside target/arm code,
so there's no point in cluttering up the cpu.h file with them.
Move some easy ones to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-2-peter.maydell@linaro.org
- expand QOS_PATH_MAX_ELEMENT_SIZE to avoid LTO issues
- support fork-follow-mode in gdbstub
- new thread-safe scoreboard API for TCG plugins
- suppress showing opcodes in plugin disassembly
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXoY7oACgkQ+9DbCVqe
KkTdTwf8D8nUB+Ee6LuglW36vtd1ETdMfUmfRis7RIBsXZZ0Tg4+8LyfKkNi1vCL
UMdWQTkSW79RfXr21QEtETokwLZ0CWQMdxDAWfOiz4S+uDgQyBE+lwUsy0mHBmd7
+J4SQb3adoZ+//9KMJhRU1wL9j3ygpEoKHVJonDObU6K5XuhE18JuBE44q7FqkWl
0VhoLDgNxrf2PqT+LLP/O3MFLDXPVKbzrZYQF0IoqBTlcqShCoaykhSwiwCZ4Sqq
NO9hVwZIOFOcOF4F6ZqRXaZrwERldoBwG+BeIx1ah20vKFVT12y02dQqdP/oKwe+
/PXFXDdzs4yMOghb4Go6SiKlKT5g4A==
=s1lF
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-updates-060324-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates (tests, gdbstub, plugins):
- expand QOS_PATH_MAX_ELEMENT_SIZE to avoid LTO issues
- support fork-follow-mode in gdbstub
- new thread-safe scoreboard API for TCG plugins
- suppress showing opcodes in plugin disassembly
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXoY7oACgkQ+9DbCVqe
# KkTdTwf8D8nUB+Ee6LuglW36vtd1ETdMfUmfRis7RIBsXZZ0Tg4+8LyfKkNi1vCL
# UMdWQTkSW79RfXr21QEtETokwLZ0CWQMdxDAWfOiz4S+uDgQyBE+lwUsy0mHBmd7
# +J4SQb3adoZ+//9KMJhRU1wL9j3ygpEoKHVJonDObU6K5XuhE18JuBE44q7FqkWl
# 0VhoLDgNxrf2PqT+LLP/O3MFLDXPVKbzrZYQF0IoqBTlcqShCoaykhSwiwCZ4Sqq
# NO9hVwZIOFOcOF4F6ZqRXaZrwERldoBwG+BeIx1ah20vKFVT12y02dQqdP/oKwe+
# /PXFXDdzs4yMOghb4Go6SiKlKT5g4A==
# =s1lF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Mar 2024 12:38:18 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-updates-060324-1' of https://gitlab.com/stsquad/qemu: (29 commits)
target/riscv: honour show_opcodes when disassembling
target/loongarch: honour show_opcodes when disassembling
disas/hppa: honour show_opcodes
disas: introduce show_opcodes
plugins: cleanup codepath for previous inline operation
plugins: remove non per_vcpu inline operation from API
contrib/plugins/howvec: migrate to new per_vcpu API
contrib/plugins/hotblocks: migrate to new per_vcpu API
tests/plugin/bb: migrate to new per_vcpu API
tests/plugin/insn: migrate to new per_vcpu API
tests/plugin/mem: migrate to new per_vcpu API
tests/plugin: add test plugin for inline operations
plugins: add inline operation per vcpu
plugins: implement inline operation relative to cpu_index
plugins: define qemu_plugin_u64
plugins: scoreboard API
tests/tcg: Add two follow-fork-mode tests
gdbstub: Implement follow-fork-mode child
gdbstub: Introduce gdb_handle_detach_user()
gdbstub: Introduce gdb_handle_set_thread_user()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-30-alex.bennee@linaro.org>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-29-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-28-alex.bennee@linaro.org>
For plugins we don't expect the raw opcodes in the disassembly. We
already deal with this by hand crafting our capstone call but for
other diassemblers we need a flag. Introduce show_opcodes which
defaults to off.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-27-alex.bennee@linaro.org>
Now we have a thread-safe equivalent of inline operation, and that all
plugins were changed to use it, there is no point to keep the old API.
In more, it will help when we implement more functionality (conditional
callbacks), as we can assume that we operate on a scoreboard.
API version bump was already done as part of this series.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-12-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-25-alex.bennee@linaro.org>
For now, it simply performs instruction, bb and mem count, and ensure
that inline vs callback versions have the same result. Later, we'll
extend it when new inline operations are added.
Use existing plugins to test everything works is a bit cumbersome, as
different events are treated in different plugins. Thus, this new one.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-6-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-19-alex.bennee@linaro.org>
Extends API with three new functions:
qemu_plugin_register_vcpu_{tb, insn, mem}_exec_inline_per_vcpu().
Those functions takes a qemu_plugin_u64 as input.
This allows to have a thread-safe and type-safe version of inline
operations.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-18-alex.bennee@linaro.org>
Instead of working on a fixed memory location, allow to address it based
on cpu_index, an element size and a given offset.
Result address: ptr + offset + cpu_index * element_size.
With this, we can target a member in a struct array from a base pointer.
Current semantic is not modified, thus inline operation still targets
always the same memory location.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-17-alex.bennee@linaro.org>
Additionally to the scoreboard, we define a qemu_plugin_u64, which is a
simple struct holding a pointer to a scoreboard, and a given offset.
This allows to have a scoreboard containing structs, without having to
bring offset to operate on a specific field.
Since most of the plugins are simply collecting a sum of per-cpu values,
qemu_plugin_u64 directly support this operation as well.
All inline operations defined later will use a qemu_plugin_u64 as input.
New functions:
- qemu_plugin_u64_add
- qemu_plugin_u64_get
- qemu_plugin_u64_set
- qemu_plugin_u64_sum
New macros:
- qemu_plugin_scoreboard_u64
- qemu_plugin_scoreboard_u64_in_struct
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-16-alex.bennee@linaro.org>
We introduce a cpu local storage, automatically managed (and extended)
by QEMU itself. Plugin allocate a scoreboard, and don't have to deal
with how many cpus are launched.
This API will be used by new inline functions but callbacks can benefit
from this as well. This way, they can operate without a global lock for
simple operations.
At any point during execution, any scoreboard will be dimensioned with
at least qemu_plugin_num_vcpus entries.
New functions:
- qemu_plugin_scoreboard_find
- qemu_plugin_scoreboard_free
- qemu_plugin_scoreboard_new
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-15-alex.bennee@linaro.org>
Add follow-fork-mode child and and follow-fork-mode parent tests.
Check for the obvious pitfalls, such as lingering breakpoints,
catchpoints, and single-step mode.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-13-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-14-alex.bennee@linaro.org>
Currently it's not possible to use gdbstub for debugging linux-user
code that runs in a forked child, which is normally done using the `set
follow-fork-mode child` GDB command. Purely on the protocol level, the
missing piece is the fork-events feature.
However, a deeper problem is supporting $Hg switching between different
processes - right now it can do only threads. Implementing this for the
general case would be quite complicated, but, fortunately, for the
follow-fork-mode case there are a few factors that greatly simplify
things: fork() happens in the exclusive section, there are only two
processes involved, and before one of them is resumed, the second one
is detached.
This makes it possible to implement a simplified scheme: the parent and
the child share the gdbserver socket, it's used only by one of them at
any given time, which is coordinated through a separate socketpair. The
processes can read from the gdbserver socket only one byte at a time,
which is not great for performance, but, fortunately, the
follow-fork-mode handling involves only a few messages.
Advertise the fork-events support, and remember whether GDB has it
as well. Implement the state machine that is initialized on fork(),
decides the current owner of the gdbserver socket, and is terminated
when one of the two processes is detached. The logic for the parent and
the child is the same, only the initial state is different.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-12-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-13-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support needs to perform certain
actions when GDB detaches from the stopped parent or the stopped child.
Introduce a user-specific hook for this.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-11-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-12-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support needs to perform certain
actions when GDB switches between the stopped parent and the stopped
child. Introduce a user-specific hook for this.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-10-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-11-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires advertising the
fork-events feature, which is user-specific. Introduce a user-specific
hook for this.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-9-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-10-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires post-fork message
exchange between the parent and the child. Prepare gdbserver_fork() for
this purpose. Rename it to gdbserver_fork_end() to better reflect its
purpose.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-8-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-9-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-7-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-8-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing the child
pid. Pass it down.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-6-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-7-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support requires knowing when
fork() is about to happen in order to initialize its state. Add a hook
for that.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-5-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-6-alex.bennee@linaro.org>
Currently ts_tid contains the parent tid after fork(), which is not
correct. So far it has not affected anything, but the upcoming
follow-fork-mode child support relies on the correct value, so fix it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20240219141628.246823-4-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-5-alex.bennee@linaro.org>
A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper and use it everywhere.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240219141628.246823-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
The upcoming follow-fork-mode child support will require disabling
gdbstub in the parent process, which may have multiple threads (which
are represented as CPUs).
Loop over all CPUs in order to remove breakpoints and disable
single-step. Move the respective code into a separate function.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240219141628.246823-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-3-alex.bennee@linaro.org>
We "fixed" a bug with LTO builds with 100c459f19 (tests/qtest: bump
up QOS_PATH_MAX_ELEMENT_SIZE) but it seems it has triggered again.
The array is sized according to the maximum anticipated length of a
path on the graph. However, the worst case for a depth-first search is
to push all nodes on the graph. So it's not really LTO, it depends on
the ordering of the constructors.
Lets be more assertive raising QOS_PATH_MAX_ELEMENT_SIZE to make it go
away again.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1186 (again)
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-2-alex.bennee@linaro.org>
Before v2.12, the implementation of serial ports was limited to
a value of MAX_SERIAL_PORTS = 4. We now dynamically allocate
the data structures for serial ports, so this limit is no longer
present, but the documentation for the -serial options still reads:
"This option can be used several times to simulate up to 4 serial ports."
Update to "This option can be used several times to simulate
multiple serial ports." to avoid misleading.
Signed-off-by: Steven Shen <steven.shen@jaguarmicro.com>
Message-id: 20240305013016.2268-1-steven.shen@jaguarmicro.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qatomic_cmpxchg() and qatomic_cmpxchg__nocheck() macros have
a comment that reads:
Returns the eventual value, failed or not
This is somewhere between cryptic and wrong, since the value actually
returned is the value that was in memory before the cmpxchg. Reword
to match how we describe these macros in atomics.rst.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240223182035.1048541-1-peter.maydell@linaro.org
If translation is enabled, and the PTE memory type is Device,
enable checking alignment via TLB_CHECK_ALIGNMENT. While the
check is done later than it should be per the ARM, it's better
than not performing the check at all.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-7-richard.henderson@linaro.org
[PMM: tweaks to comment text]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
If translation is disabled, the default memory type is Device, which
requires alignment checking. This is more optimally done early via
the MemOp given to the TCG memory operation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reported-by: Idan Horowitz <idan.horowitz@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-6-richard.henderson@linaro.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1204
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This creates a per-page method for checking of alignment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the target to set tlb flags to apply to all of the
comparators. Remove MemTxAttrs.byte_swap, as the bit is
not relevant to memory transactions, only the page mapping.
Adjust target/sparc to set TLB_BSWAP directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These fields are no longer used since 937f224559.
Target specific extensions to the page tables should be done
with TARGET_PAGE_ENTRY_EXTRA.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have removed TARGET_PAGE_BITS_MIN-6 from
TLB_FLAGS_MASK, we can test for 32-byte alignment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
