Use %zu specifier for size_t in printf, otherwise build would fail
on platforms where size_t is not unsigned long
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Macro MAC_FMT and MAC_ARG are not defined, but used in vmxnet3_net_init().
This will cause build error when debug level is raised in
vmxnet3_debug.h (enable all VMXNET3_DEBUG_xxx).
Use VMXNET_MF and VXMNET_MA instead.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Current text_console_update() writes totally broken color attributes
to console_write_ch(). The format now is writing,
[WRONG]
bold << 21 | fg << 12 | bg << 8 | char
fg == 3bits curses color number
bg == 3bits curses color number
I can't see this format is where come from. Anyway, this doesn't work
at all.
What curses expects is actually (and vga.c is using),
[RIGHT]
bold << 21 | bg << 11 | fg << 8 | char
fg == 3bits vga color number
bg == 3bits vga color number
And curses set COLOR_PAIR() up to match this format, and curses's
chtype. I.e,
bold | color_pair | char
color_pair == (bg << 3 | fg)
To fix, this simply uses VGA color number everywhere except curses.c
internal. Then, convert it to above [RIGHT] format to write by
console_write_ch(). And as bonus, this reduces to expose curses define
to other parts (removes COLOR_* from console.c).
[Tested the first line is displayed as white on blue back for monitor
in curses console]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Message-id: 87r3j95407.fsf@mail.parknet.co.jp
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWjuqwAAoJEDuxQgLoOKytznIH/Ap0ldYSdwBouhZkpKRDwIwf
5/9skIgwuDJ2DeGDqAcVEC4Nxq9HuUCz7DcXPAiTfFRM7ccpnSJJ5O0vfTuC353t
59h1JYh2kLDLXEm4RdylLMeuLNGuc+avUtWGVVQOrjFmSQAO7z3nexmoNRL6ccqE
Cd/Oe1I2QU65p/4YpyslKg0N8A/WrHjOsf58Coo2ZCGNh3GLCNuE5mpofXBeSfWB
bFdaq2Uv9x3F+vVq5zx3iNt2J8kHXlwZBEEYACzs+2j7j7O5TedjHDjgBrirbxl/
C3F8d+4JqhzAP141yZMO35z1hbehCaKddDZRuN8ryeMXSnBLU3hP9wm4Y1HLrJc=
=bxBe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-for-peter-2016-01-07' into staging
Block patches from 2015-12-23 until 2016-01-07.
# gpg: Signature made Thu 07 Jan 2016 22:46:08 GMT using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* remotes/maxreitz/tags/pull-block-for-peter-2016-01-07: (21 commits)
iotests: Add test cases for blockdev-mirror
qmp: Add blockdev-mirror command
block: Add check on mirror target
block: Extract blockdev part of qmp_drive_mirror
block: Rename BLOCK_OP_TYPE_MIRROR to BLOCK_OP_TYPE_MIRROR_SOURCE
qemu-iotests: s390x: fix test 051
iotests: 095: Filter _img_info output
iotests: 095: Use TEST_IMG override instead of "mv"
iotests: 050: Use TEST_IMG override instead of "mv"
iotests: 038: Use TEST_IMG override instead of "mv"
iotests: 037: Use TEST_IMG override instead of "mv"
iotests: 034: Use TEST_IMG override instead of "mv"
iotests: 028: Use TEST_IMG override instead of "mv"
iotests: 024: Use TEST_IMG override instead of "mv"
iotests: 020: Use TEST_IMG override instead of "mv"
iotests: 019: Use TEST_IMG override instead of "mv"
iotests: 018: Use TEST_IMG override instead of "mv"
block/qapi: Clear err for further error
block: use drained section in bdrv_close
qemu-iotests: make check-block.sh work on out-of-tree builds
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
On suspend, if a SOF interrupt is raised between the stop of the
device processing and the change of the device internal state to
OHCI_USB_SUSPEND (QEMU stops SOF timer on this state change), this
interrupt is never acknowledged.
This patch clears pending SOF interrupt on OHCI_USB_SUSPEND setting.
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_suspend(): the function stop the operation and acknowledge
pending interrupts (but doesn't disable it). Later in the function,
the device is moved to OHCI_SUSPEND_STATE, and the driver to
OHCI_RH_SUSPENDED. If between the moment when the interrupt is
acknowledged and the moment when the device is suspended a new
interrupt is raised, it will be never acknowledged because the
driver is now not in OHCI_RH_RUNNING state.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-3-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On overcommitted CPU, kernel can be so slow that an interrupt can
be triggered by the device whereas the driver is not ready to receive
it. This drives us into an infinite loop.
This does not happen on real hardware because real hardware never send
interrupt immediately after the controller has been moved to OPERATION state.
This patch tries to delay the first SOF interrupt to let driver exits from
the critical section (which is not protected against interrupts...)
Some details:
- ohci_irq(): the OHCI interrupt handler, acknowledges the SOF IRQ
only if the state of the driver (rh_state) is OHCI_STATE_RUNNING.
So if this interrupt happens and the driver is not in this state,
the function is called again and again, moving the system to a
CPU starvation.
- ohci_rh_resume(): the driver re-enables operation with OHCI_USB_OPER.
In QEMU this start the SOF timer and QEMU starts to send IRQs. As
the driver is not in OHCI_STATE_RUNNING and not protected against IRQ,
the ohci_irq() can be called and the driver never moved to
OHCI_STATE_RUNNING.
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1452109525-32150-2-git-send-email-lvivier@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
trace_usb_mtp_inotify_event() was being called after the object was
being freed.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-3-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb_mtp_inotify_cleanup uses QLIST_FOREACH to pick events
from a list and free them which is incorrect. Use QLIST_FOREACH_SAFE
instead.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 1450861787-16213-2-git-send-email-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that: "This bit is set by HCD to initiate a software reset of HC."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-4-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Specification says that, when entering this state, "the contents of the registers
(except Root Hub registers) are preserved by the HC. [...] The Root Hub is being reset,
which causes the Root Hub's downstream ports to be reset and possibly powered off."
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450567431-31795-3-git-send-email-hpoussin@reactos.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This will start a mirror job from a named device to another named
device, its relation with drive-mirror is similar with blockdev-backup
to drive-backup.
In blockdev-mirror, the target node should be prepared by blockdev-add,
which will be responsible for assigning a name to the new node, so
we don't have 'node-name' parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1450932306-13717-5-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is the part that will be reused by blockdev-mirror.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's necessary to distinguish source and target before we can add
blockdev-mirror, because we would want a concrete type of operation to
check on target bs before starting.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1450932306-13717-2-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Replace the remaining "-drive file..."
by "-drive file=...,if=none,id=$device_id", then x86 and s390x
can get the common output.
"if=ide, if=floppy, if=scsi" are not supported by s390x,
so these test cases are not executed for s390x platform.
Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com>
Message-id: 1451885360-20236-2-git-send-email-tubo@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since a5002d5 (block/qapi: allow best-effort query) we don't return at
this error, however err must be cleared before passing to
bdrv_query_snapshot_info_list below, as required by error API.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450779107-26765-1-git-send-email-famz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_close is used when ejecting a medium. Use a drained section to ensure
that all I/O goes to either the old medium or the bitbucket.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450867706-19860-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Since check-block.sh, the "check" script has learnt to find the source
path. On the other hand, it expects common.env to be in the build tree
(both changes made in commit 76c7560, "configure: Enable out-of-tree
iotests", 2014-05-24). So, it is wrong to invoke "check" from the source
path like check-block.sh does. Fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450867341-11100-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Raw is as qualified as qcow2 for this test case, add it for more
coverage.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1450851979-15580-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Set the MicroBlaze CPU version to 8.10.a avoiding a runtime
warning due to an unset CPU version.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Set the MicroBlaze CPU version to 7.10.d avoiding a runtime
warning due to an unset CPU version.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJWjmYNAAoJEFvCxW+uDzIfSycH/An/L9tDFXtoC/W7Dq7/cKQw
7AWhskcfgCxxo0DoqnyHc6JKgONr8Jv15Vf7PTMM23KHioCX5wEgH52mOT5bKXDy
RnGG5qe4rj5A0i48kRZTG0ryjcKHra5I08UsznljGROmp5/fjLXAG1QEgrKKGXGn
kQyWZ46g8vka+MBKtetNipFForimIWOWjVO54neb7kwLMV2yiE8gaD4oAgJDmgSN
dHXB6rxCpBcnjdYCuri/9E1hVZmv7GmUH5e3cbD/COJu8ZFHASqXvtAih786vQa0
Fj441hO1WToi8PrrZBv76UxUton06O1+QvYZsCMf073vEyQKUhyHrYpd2hpWFQI=
=zyNj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into staging
qemu-sparc update
# gpg: Signature made Thu 07 Jan 2016 13:20:13 GMT using RSA key ID AE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
* remotes/mcayland/tags/qemu-sparc-signed:
target-sparc: implement NPT timer bit
sun4u: split NPT and INT_DIS accesses between timer and compare registers
sun4u: split out NPT and INT_DIS into separate CPUTimer fields
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the NPT bit is set in the timer register, all non-supervisor read accesses
to the register should fail with a privilege exception.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Accesses to the timer register high bit should only set NPT, whilst accesses
to the timer compare register high bit should only set INT_DIS. This fixes
issues with the timer being unexpectedly disabled whilst trying to boot
FreeBSD SPARC64.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Currently there is confusion between use of these bits for the timer and timer
compare registers (while they both have the same value, the behaviour is
different). Split into two separate CPUTimer fields so we can always reference
the correct value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Patches that change tracetool can break the build if old build output
files are lying around.
This happens because the Makefile does not specify dependencies on
tracetool. The build will use old object files that do not match the
current source code.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Makefile uses intermediate timestamp files to avoid rebuilding if
tracetool output is unchanged.
Timestamps are implemented incorrectly. This was fixed for rules.mak in
commit 4b25966ab9 ("rules.mak: cleanup
config generation rules") but never fixed in trace/Makefile.objs.
The problem with the old timestamp implementation was that make doesn't
notice the updated file modification time until the next time it is run.
It was necessary to run make twice in a row to achieve a full rebuild.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit c8ee0a4 introduced new events containing PRIx64 constants without
including the % prefix in the preceding string. This results in a compile
error during build if --enable-trace-backends is passed to configure.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 1450566522-6003-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some functions was moved from block.c to block/io.c, so the trace-events file should reflect that change.
Signed-off-by: Qinghua Jin <qhjin_dev@163.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ACPI aml files traditionally have been managed in the seabios repo.
In qemu version 2.0 we've switched over to have qemu generate the
acpi tables and provide them to the firmware via fw_cfg.
The old aml files are still there and used for old machine types.
Well, actually the q35 file only, the piix4 version is compiled into
seabios (unless built with CONFIG_ACPI_DSDT=n) and is there for
reference only.
The aml files havn't been touched for a long time, and given that
new features requiring acpi changes are typically only added to new
machine types this is unlikely to change in the future. So stop
updating them.
That allows to cleanup things a bit on the seabios side in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
