In get_ite() and update_ite() we work with a 12-byte in-guest-memory
table entry, which we intend to handle as an 8-byte value followed by
a 4-byte value. Unfortunately the calculation of the address of the
4-byte value is wrong, because we write it as:
table_base_address + (index * entrysize) + 4
(obfuscated by the way the expression has been written)
when it should be + 8. This bug meant that we overwrote the top
bytes of the 8-byte value with the 4-byte value. There are no
guest-visible effects because the top half of the 8-byte value
contains only the doorbell interrupt field, which is used only in
GICv4, and the two bugs in the "write ITE" and "read ITE" codepaths
cancel each other out.
We can't simply change the calculation, because this would break
migration of a (TCG) guest from the old version of QEMU which had
in-guest-memory interrupt tables written using the buggy version of
update_ite(). We must also at the same time change the layout of the
fields within the ITE_L and ITE_H values so that the in-memory
locations of the fields we care about (VALID, INTTYPE, INTID and
ICID) stay the same.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-7-peter.maydell@linaro.org
Make update_cte() take a CTEntry struct rather than all the fields
of the new CTE as separate arguments.
This brings it into line with the update_dte() API.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-6-peter.maydell@linaro.org
In the ITS, a CTE is an entry in the collection table, which contains
multiple fields. Currently the function get_cte() which reads one
entry from the device table returns a success/failure boolean and
passes back the raw 64-bit integer CTE value via a pointer argument.
We then extract fields from the CTE as we need them.
Create a real C struct with the same fields as the CTE, and
populate it in get_cte(), so that that function and update_cte()
are the only ones which need to care about the in-guest-memory
format of the CTE.
This brings get_cte()'s API into line with get_dte().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-5-peter.maydell@linaro.org
Make update_dte() take a DTEntry struct rather than all the fields of
the new DTE as separate arguments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-4-peter.maydell@linaro.org
In the ITS, a DTE is an entry in the device table, which contains
multiple fields. Currently the function get_dte() which reads one
entry from the device table returns it as a raw 64-bit integer,
which we then pass around in that form, only extracting fields
from it as we need them.
Create a real C struct with the same fields as the DTE, and
populate it in get_dte(), so that that function and update_dte()
are the only ones that need to care about the in-guest-memory
format of the DTE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-3-peter.maydell@linaro.org
Currently the ITS accesses each 8-byte doubleword in a 4-doubleword
command packet with a separate address_space_ldq_le() call. This is
awkward because the individual command processing functions have
ended up with code to handle "load more doublewords out of the
packet", which is both unwieldy and also a potential source of bugs
because it's not obvious when looking at a line that pulls a field
out of the 'value' variable which of the 4 doublewords that variable
currently holds.
Switch to using address_space_map() to map the whole command packet
at once and fish the four doublewords out of it. Then each process_*
function can start with a few lines of code that extract the fields
it cares about.
This requires us to split out the guts of process_its_cmd() into a
new do_process_its_cmd(), because we were previously overloading the
value and offset arguments as a backdoor way to directly pass the
devid and eventid from a write to GITS_TRANSLATER. The new
do_process_its_cmd() takes those arguments directly, and
process_its_cmd() is just a wrapper that does the "read fields from
command packet" part.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220201193207.2771604-2-peter.maydell@linaro.org
We currently miss a bunch of register resets in the device reset
function. This sometimes prevents the guest from rebooting after
a system_reset (with virtio-blk-pci). For instance, we may get
the following errors:
invalid STE
smmuv3-iommu-memory-region-0-0 translation failed for iova=0x13a9d2000(SMMU_EVT_C_BAD_STE)
Invalid read at addr 0x13A9D2000, size 2, region '(null)', reason: rejected
invalid STE
smmuv3-iommu-memory-region-0-0 translation failed for iova=0x13a9d2000(SMMU_EVT_C_BAD_STE)
Invalid write at addr 0x13A9D2000, size 2, region '(null)', reason: rejected
invalid STE
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220202111602.627429-1-eric.auger@redhat.com
Fixes: 10a83cb988 ("hw/arm/smmuv3: Skeleton")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting the SysTick timer and changing the clock source a the same time
will result in an error, if the previous clock period was zero. For exmaple,
on the mps2-tz platforms, no refclk is present. Right after reset, the
configured ptimer period is zero, and trying to enabling it will turn it off
right away. E.g., code running on the platform setting
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk;
should change the clock source and enable the timer on real hardware, but
resulted in an error in qemu.
Signed-off-by: Richard Petri <git@rpls.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220201192650.289584-1-git@rpls.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always call arm_load_kernel() regardless of kernel_filename being
set. This is needed because arm_load_kernel() sets up reset for
the CPUs.
Fixes: 6f16da53ff (hw/arm: versal: Add a virtual Xilinx Versal board)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220130110313.4045351-2-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we're using PSCI emulation, we add a /psci node to the device tree
we pass to the guest. At the moment, if the dtb already has a /psci
node in it, we retain it, rather than replacing it. (This behaviour
was added in commit c39770cd63 in 2018.)
This is a problem if the existing node doesn't match our PSCI
emulation. In particular, it might specify the wrong method (HVC vs
SMC), or wrong function IDs for cpu_suspend/cpu_off/etc, in which
case the guest will not get the behaviour it wants when it makes PSCI
calls.
An example of this is trying to boot the highbank or midway board
models using the device tree supplied in the kernel sources: this
device tree includes a /psci node that specifies function IDs that
don't match the (PSCI 0.2 compliant) IDs that QEMU uses. The dtb
cpu_suspend function ID happens to match the PSCI 0.2 cpu_off ID, so
the guest hangs after booting when the kernel tries to idle the CPU
and instead it gets turned off.
Instead of retaining an existing /psci node, delete it entirely
and replace it with a node whose properties match QEMU's PSCI
emulation behaviour. This matches the way we handle /memory nodes,
where we also delete any existing nodes and write in ones that
match the way QEMU is going to behave.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-17-peter.maydell@linaro.org
We use the arm_boot_info::nb_cpus field in only one place, and that
place can easily get the number of CPUs locally rather than relying
on the board code to have set the field correctly. (At least one
board, xlnx-versal-virt, does not set the field despite having more
than one CPU.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-16-peter.maydell@linaro.org
The highbank and midway board code includes boot-stub code for
handling secondary CPU boot which keeps the secondaries in a pen
until the primary writes to a known location with the address they
should jump to.
This code is never used, because the boards enable QEMU's PSCI
emulation, so secondary CPUs are kept powered off until the PSCI call
which turns them on, and then start execution from the address given
by the guest in that PSCI call. Delete the unreachable code.
(The code was wrong for midway in any case -- on the Cortex-A15 the
GIC CPU interface registers are at a different offset from PERIPHBASE
compared to the Cortex-A9, and the code baked-in the offsets for
highbank's A9.)
Note that this commit implicitly depends on the preceding "Don't
write secondary boot stub if using PSCI" commit -- the default
secondary-boot stub code overlaps with one of the highbank-specific
bootcode rom blobs, so we must suppress the secondary-boot
stub code entirely, not merely replace the highbank-specific
version with the default.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-15-peter.maydell@linaro.org
If we're using PSCI emulation to start secondary CPUs, there is no
point in writing the "secondary boot" stub code, because it will
never be used -- secondary CPUs start powered-off, and when powered
on are set to begin execution at the address specified by the guest's
power-on PSCI call, not at the stub.
Move the call to the hook that writes the secondary boot stub code so
that we can do it only if we're starting a Linux kernel and not using
PSCI.
(None of the users of the hook care about the ordering of its call
relative to anything else: they only use it to write a rom blob to
guest memory.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-14-peter.maydell@linaro.org
Now that we have dealt with the one special case (highbank) that needed
to set both psci_conduit and secure_board_setup, we don't need to
allow that combination any more. It doesn't make sense in general,
so use an assertion to ensure we don't add new boards that do it
by accident without thinking through the consequences.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-13-peter.maydell@linaro.org
Guest code on highbank may make non-PSCI SMC calls in order to
enable/disable the L2x0 cache controller (see the Linux kernel's
arch/arm/mach-highbank/highbank.c highbank_l2c310_write_sec()
function). The ABI for this is documented in kernel commit
8e56130dcb as being borrowed from the OMAP44xx ROM. The OMAP44xx TRM
documents this function ID as having no return value and potentially
trashing all guest registers except SP and PC. For QEMU's purposes
(where our L2x0 model is a stub and enabling or disabling it doesn't
affect the guest behaviour) a simple "do nothing" SMC is fine.
We currently implement this NOP behaviour using a little bit of
Secure code we run before jumping to the guest kernel, which is
written by arm_write_secure_board_setup_dummy_smc(). The code sets
up a set of Secure vectors where the SMC entry point returns without
doing anything.
Now that the PSCI SMC emulation handles all SMC calls (setting r0 to
an error code if the input r0 function identifier is not recognized),
we can use that default behaviour as sufficient for the highbank
cache controller call. (Because the guest code assumes r0 has no
interesting value on exit it doesn't matter that we set it to the
error code). We can therefore delete the highbank board code that
sets secure_board_setup to true and writes the secure-code bootstub.
(Note that because the OMAP44xx ABI puts function-identifiers in
r12 and PSCI uses r0, we only avoid a clash because Linux's code
happens to put the function-identifier in both registers. But this
is true also when the kernel is running on real firmware that
implements both ABIs as far as I can see.)
This change fixes in passing booting on the 'midway' board model,
which has been completely broken since we added support for Hyp
mode to the Cortex-A15 CPU. When we did that boot.c was made to
start running the guest code in Hyp mode; this includes the
board_setup hook, which instantly UNDEFs because the NSACR is
not accessible from Hyp. (Put another way, we never made the
secure_board_setup hook support cope with Hyp mode.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-12-peter.maydell@linaro.org
Change the highbank/midway boards to use the new boot.c functionality
to allow us to enable psci-conduit only if the guest is being booted
in EL1 or EL2, so that if the user runs guest EL3 firmware code our
PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit and start-powered-off
properties on the CPU objects in the board code, and instead set the
psci_conduit field in the arm_boot_info struct to tell the common
boot loader code that we'd like PSCI if the guest is starting at an
EL that it makes sense with (in which case it will set these
properties).
This means that when running guest code at EL3, all the cores
will start execution at once on poweron. This matches the
real hardware behaviour. (A brief description of the hardware
boot process is in the u-boot documentation for these boards:
https://u-boot.readthedocs.io/en/latest/board/highbank/highbank.html#boot-process
-- in theory one might run the 'a9boot'/'a15boot' secure monitor
code in QEMU, though we probably don't emulate enough for that.)
This affects the highbank and midway boards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-10-peter.maydell@linaro.org
Instead of setting the CPU psci-conduit and start-powered-off
properties in the virt board code, set the arm_boot_info psci_conduit
field so that the boot.c code can do it.
This will fix a corner case where we were incorrectly enabling PSCI
emulation when booting guest code into EL3 because it was an ELF file
passed to -kernel or to the generic loader. (EL3 guest code started
via -bios or -pflash was already being run with PSCI emulation
disabled.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-9-peter.maydell@linaro.org
Instead of setting the CPU psci-conduit and start-powered-off
properties in the xlnx-versal-virt board code, set the arm_boot_info
psci_conduit field so that the boot.c code can do it.
This will fix a corner case where we were incorrectly enabling PSCI
emulation when booting guest code into EL3 because it was an ELF file
passed to -kernel. (EL3 guest code started via -bios, -pflash, or
the generic loader was already being run with PSCI emulation
disabled.)
Note that EL3 guest code has no way to turn on the secondary CPUs
because there's no emulated power controller, but this was already
true for EL3 guest code run via -bios, -pflash, or the generic
loader.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-8-peter.maydell@linaro.org
Change the Xilinx ZynqMP-based board xlnx-zcu102 to use the new
boot.c functionality to allow us to enable psci-conduit only if
the guest is being booted in EL1 or EL2, so that if the user runs
guest EL3 firmware code our PSCI emulation doesn't get in its
way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.
Note that this means that EL3 guest code will have no way
to power on secondary cores, because we don't model any
kind of power controller that does that on this SoC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220127154639.2090164-7-peter.maydell@linaro.org
Change the allwinner-h3 based board to use the new boot.c
functionality to allow us to enable psci-conduit only if the guest is
being booted in EL1 or EL2, so that if the user runs guest EL3
firmware code our PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes sense
with.
This affects the orangepi-pc board.
This commit leaves the secondary CPUs in the powered-down state if
the guest is booting at EL3, which is the same behaviour as before
this commit. The secondaries can no longer be started by that EL3
code making a PSCI call but can still be started via the CPU
Configuration Module registers (which we model in
hw/misc/allwinner-cpucfg.c).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20220127154639.2090164-6-peter.maydell@linaro.org
Change the iMX-SoC based boards to use the new boot.c functionality
to allow us to enable psci-conduit only if the guest is being booted
in EL1 or EL2, so that if the user runs guest EL3 firmware code our
PSCI emulation doesn't get in its way.
To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.
This affects the mcimx6ul-evk and mcimx7d-sabre boards.
Note that for the mcimx7d board, this means that when running guest
code at EL3 there is currently no way to power on the secondary CPUs,
because we do not currently have a model of the system reset
controller module which should be used to do that for the imx7 SoC,
only for the imx6 SoC. (Previously EL3 code which knew it was
running on QEMU could use a PSCI call to do this.) This doesn't
affect the imx6ul-evk board because it is uniprocessor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220127154639.2090164-5-peter.maydell@linaro.org
Currently we expect board code to set the psci-conduit property on
CPUs and ensure that secondary CPUs are created with the
start-powered-off property set to false, if the board wishes to use
QEMU's builtin PSCI emulation. This worked OK for the virt board
where we first wanted to use it, because the virt board directly
creates its CPUs and is in a reasonable position to set those
properties. For other boards which model real hardware and use a
separate SoC object, however, it is more awkward. Most PSCI-using
boards just set the psci-conduit board unconditionally.
This was never strictly speaking correct (because you would not be
able to run EL3 guest firmware that itself provided the PSCI
interface, as the QEMU implementation would overrule it), but mostly
worked in practice because for non-PSCI SMC calls QEMU would emulate
the SMC instruction as normal (by trapping to guest EL3). However,
we would like to make our PSCI emulation follow the part of the SMCC
specification that mandates that SMC calls with unknown function
identifiers return a failure code, which means that all SMC calls
will be handled by the PSCI code and the "emulate as normal" path
will no longer be taken.
We tried to implement that in commit 9fcd15b919
("arm: tcg: Adhere to SMCCC 1.3 section 5.2"), but this
regressed attempts to run EL3 guest code on the affected boards:
* mcimx6ul-evk, mcimx7d-sabre, orangepi, xlnx-zcu102
* for the case only of EL3 code loaded via -kernel (and
not via -bios or -pflash), virt and xlnx-versal-virt
so for the 7.0 release we reverted it (in commit 4825eaae4f).
This commit provides a mechanism that boards can use to arrange that
psci-conduit is set if running guest code at a low enough EL but not
if it would be running at the same EL that the conduit implies that
the QEMU PSCI implementation is using. (Later commits will convert
individual board models to use this mechanism.)
We do this by moving the setting of the psci-conduit and
start-powered-off properties to arm_load_kernel(). Boards which want
to potentially use emulated PSCI must set a psci_conduit field in the
arm_boot_info struct to the type of conduit they want to use (SMC or
HVC); arm_load_kernel() will then set the CPUs up accordingly if it
is not going to start the guest code at the same or higher EL as the
fake QEMU firmware would be at.
Board/SoC code which uses this mechanism should no longer set the CPU
psci-conduit property directly. It should only set the
start-powered-off property for secondaries if EL3 guest firmware
running bare metal expects that rather than the alternative "all CPUs
start executing the firmware at once".
Note that when calculating whether we are going to run guest
code at EL3, we ignore the setting of arm_boot_info::secure_board_setup,
which might cause us to run a stub bit of guest code at EL3 which
does some board-specific setup before dropping to EL2 or EL1 to
run the guest kernel. This is OK because only one board that
enables PSCI sets secure_board_setup (the highbank board), and
the stub code it writes will behave the same way whether the
one SMC call it makes is handled by "emulate the SMC" or by
"PSCI default returns an error code". So we can leave that stub
code in place until after we've changed the PSCI default behaviour;
at that point we will remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20220127154639.2090164-4-peter.maydell@linaro.org
'Or' the IRQs coming from the QSPI and QSPI DMA models. This is done for
avoiding the situation where one of the models incorrectly deasserts an
interrupt asserted from the other model (which will result in that the IRQ
is lost and will not reach guest SW).
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220203151742.1457-1-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change exposes ACPI ERST support for x86 guests.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-8-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This builds the ACPI ERST table to inform OSPM how to communicate
with the acpi-erst device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-7-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements a PCI device for ACPI ERST. This implements the
non-NVRAM "mode" of operation for ERST as it is supported by
Linux and Windows.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [2] broke original '\0' padding of OEM ID and OEM Table ID
fields in headers of ACPI tables. While it doesn't have impact on
default values since QEMU uses 6 and 8 characters long values
respectively, it broke usecase where IDs are provided on QEMU CLI.
It shouldn't affect guest (but may cause licensing verification
issues in guest OS).
One of the broken usecases is user supplied SLIC table with IDs
shorter than max possible length, where [2] mangles IDs with extra
spaces in RSDT and FADT tables whereas guest OS expects those to
mirror the respective values of the used SLIC table.
Fix it by replacing whitespace padding with '\0' padding in
accordance with [1] and expectations of guest OS
1) ACPI spec, v2.0b
17.2 AML Grammar Definition
...
//OEM ID of up to 6 characters. If the OEM ID is
//shorter than 6 characters, it can be terminated
//with a NULL character.
2)
Fixes: 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/707
Reported-by: Dmitry V. Orekhov <dima.orekhov@gmail.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20220112130332.1648664-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Tested-by: Dmitry V. Orekhov dima.orekhov@gmail.com
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYfrIogAKCRD3ErUQojoP
X93ZAP9hqp/FCz/goH7Tpqce6FspHriJm6Ej2Rd7HxZWmh4bpQD/cMjY8qpcA/6r
Nx4bgRPT6kCZwwLx7v2jZ2QsA2KaZAM=
=c0qO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/hppa-updates-pull-request' into staging
Fixes and updates for hppa target
This patchset fixes some important bugs in the hppa artist graphics driver:
- Fix artist graphics for HP-UX and Linux
- Mouse cursor fixes for HP-UX
- Fix draw_line() function on artist graphic
and it adds new qemu features for hppa:
- Allow up to 16 emulated CPUs (instead of 8)
- Add support for an emulated TOC/NMI button
A new Seabios-hppa firmware is included as well:
- Update SeaBIOS-hppa to VERSION 3
- New opt/hostid fw_cfg option to change hostid
- Add opt/console fw_cfg option to select default console
- Added 16x32 font to STI firmware
Signed-off-by: Helge Deller <deller@gmx.de>
# gpg: Signature made Wed 02 Feb 2022 18:08:34 GMT
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/hppa-updates-pull-request:
hw/display/artist: Fix draw_line() artefacts
hw/display/artist: Mouse cursor fixes for HP-UX
hw/display/artist: rewrite vram access mode handling
hppa: Add support for an emulated TOC/NMI button.
hw/hppa: Allow up to 16 emulated CPUs
seabios-hppa: Update SeaBIOS-hppa to VERSION 3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The draw_line() function left artefacts on the screen because it was using the
x/y variables which were incremented in the loop before. Fix it by using the
unmodified x1/x2 variables instead.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
This patch fix the behaviour and positioning of the X11 mouse cursor in HP-UX.
The current code missed to subtract the offset of the CURSOR_CTRL register from
the current mouse cursor position. The HP-UX graphics driver stores in this
register the offset of the mouse graphics compared to the current cursor
position. Without this adjustment the mouse behaves strange at the screen
borders.
Additionally, depending on the HP-UX version, the mouse cursor position
in the cursor_pos register reports different values. To accommodate this
track the current min and max reported values and auto-adjust at runtime.
With this fix the mouse now behaves as expected on HP-UX 10 and 11.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
When writing this code it was assumed that register 0x118000 is the
buffer access mode for color map accesses. It turned out that this
is wrong. Instead register 0x118000 sets both src and dst buffer
access mode at the same time.
This required a larger rewrite of the code. The good thing is that
both the linear framebuffer and the register based vram access can
now be combined into one function.
This makes the linux 'stifb' framebuffer work, and both HP-UX 10.20
and HP-UX 11.11 are still working.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or
a BMC/GSP function to trigger a TOC. TOC is a non-maskable interrupt that is
sent to the processor. This can be used for diagnostic purposes like obtaining
a stack trace/register dump or to enter KDB/KGDB in Linux.
This patch adds support for such an emulated TOC button.
It wires up the qemu monitor "nmi" command to trigger a TOC. For that it
provides the hppa_nmi function which is assigned to the nmi_monitor_handler
function pointer. When called it raises the EXCP_TOC hardware interrupt in the
hppa_cpu_do_interrupt() function. The interrupt function then calls the
architecturally defined TOC function in SeaBIOS-hppa firmware (at fixed address
0xf0000000).
According to the PA-RISC PDC specification, the SeaBIOS firmware then writes
the CPU registers into PIM (processor internal memmory) for later analysis. In
order to write all registers it needs to know the contents of the CPU "shadow
registers" and the IASQ- and IAOQ-back values. The IAOQ/IASQ values are
provided by qemu in shadow registers when entering the SeaBIOS TOC function.
This patch adds a new aritificial opcode "getshadowregs" (0xfffdead2) which
restores the original values of the shadow registers. With this opcode SeaBIOS
can store those registers as well into PIM before calling an OS-provided TOC
handler.
To trigger a TOC, switch to the qemu monitor with Ctrl-A C, and type in the
command "nmi". After the TOC started the OS-debugger, exit the qemu monitor
with Ctrl-A C.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This brings the hppa_hardware.h file in sync with the copy in the
SeaBIOS-hppa sources.
In order to support up to 16 CPUs, it's required to move the HPA for
MEMORY_HPA out of the address space of the new 16th CPU.
The new address of 0xfffff000 worked well for Linux and HP-UX, while
other addresses close to the former 0xfffbf000 area are used by the
architecture for local and global broadcasts.
The PIM_STORAGE_SIZE constant is used in SeaBIOS sources and
is relevant for the TOC/NMI feature.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
-----BEGIN PGP SIGNATURE-----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=m7N5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220128' into staging
target-arm queue:
* Update copyright dates to 2022
* hw/armv7m: Fix broken VMStateDescription
* hw/char/exynos4210_uart: Fix crash on trying to load VM state
* rtc: Move RTC function prototypes to their own header
* xlnx-versal-virt: Support PMC SLCR
* xlnx-versal-virt: Support OSPI flash memory controller
* scripts: Explain the difference between linux-headers and standard-headers
* target/arm: Log CPU index in 'Taking exception' log
* arm_gicv3_its: Various bugfixes and cleanups
* arm_gicv3_its: Implement the missing MOVI and MOVALL commands
* ast2600: Fix address mapping of second SPI controller
* target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
# gpg: Signature made Fri 28 Jan 2022 15:29:36 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220128: (32 commits)
target/arm: Use correct entrypoint for SVC taken from Hyp to Hyp
hw/arm: ast2600: Fix address mapping of second SPI controller
hw/intc/arm_gicv3_its: Implement MOVI
hw/intc/arm_gicv3_its: Implement MOVALL
hw/intc/arm_gicv3_its: Check table bounds against correct limit
hw/intc/arm_gicv3_its: Make GITS_BASER<n> RAZ/WI for unimplemented registers
hw/intc/arm_gicv3_its: Provide read accessor for translation_ops
hw/intc/arm_gicv3: Set GICR_CTLR.CES if LPIs are supported
hw/intc/arm_gicv3_redist: Remove unnecessary zero checks
hw/intc/arm_gicv3_its: Sort ITS command list into numeric order
hw/intc/arm_gicv3: Honour GICD_CTLR.EnableGrp1NS for LPIs
hw/intc/arm_gicv3_its: Don't clear GITS_CWRITER on writes to GITS_CBASER
hw/intc/arm_gicv3_its: Don't clear GITS_CREADR when GITS_CTLR.ENABLED is set
hw/intc/arm_gicv3: Initialise dma_as in GIC, not ITS
hw/intc/arm_gicv3_its: Add tracepoints
target/arm: Log CPU index in 'Taking exception' log
scripts: Explain the difference between linux-headers and standard-headers
MAINTAINERS: Remove myself (for raspi).
MAINTAINERS: Add an entry for Xilinx Versal OSPI
hw/arm/xlnx-versal-virt: Connect mt35xu01g flashes to the OSPI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
Address should be 0x1E631000 and not 0x1E641000 as initially introduced.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/838
Fixes: f25c0ae107 ("aspeed/soc: Add AST2600 support")
Suggested-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220126083520.4135713-1-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the ITS MOVI command. This command specifies a (physical) LPI
by DeviceID and EventID and provides a new ICID for it. The ITS must
find the interrupt translation table entry for the LPI, which will
tell it the old ICID. It then moves the pending state of the LPI from
the old redistributor to the new one and updates the ICID field in
the translation table entry.
This is another GICv3 ITS command that we forgot to implement. Linux
does use this one, but only if the guest powers off one of its CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-15-peter.maydell@linaro.org
Implement the ITS MOVALL command, which takes all the pending
interrupts on a source redistributor and makes the not-pending on
that source redistributor and pending on a destination redistributor.
This is a GICv3 ITS command which we forgot to implement. (It is
not used by Linux guests.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-14-peter.maydell@linaro.org
Currently when we fill in a TableDesc based on the value the guest
has written to the GITS_BASER<n> register, we calculate both:
* num_entries : the number of entries in the table, constrained
by the amount of memory the guest has given it
* num_ids : the number of IDs we support for this table,
constrained by the implementation choices and the architecture
(eg DeviceIDs are 16 bits, so num_ids is 1 << 16)
When validating ITS commands, however, we check only num_ids,
thus allowing a broken guest to specify table entries that
index off the end of it. This will only corrupt guest memory,
but the ITS is supposed to reject such commands as invalid.
Instead of calculating both num_entries and num_ids, set
num_entries to the minimum of the two limits, and check that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-13-peter.maydell@linaro.org
The ITS has a bank of 8 GITS_BASER<n> registers, which allow the
guest to specify the base address of various data tables. Each
register has a read-only type field indicating which table it is for
and a read-write field where the guest can write in the base address
(among other things). We currently allow the guest to write the
writeable fields for all eight registers, even if the type field is 0
indicating "Unimplemented". This means the guest can provoke QEMU
into asserting by writing an address into one of these unimplemented
base registers, which bypasses the "if (!value) continue" check in
extract_table_params() and lets us hit the assertion that the type
field is one of the permitted table types.
Prevent the assertion by not allowing the guest to write to the
unimplemented base registers. This means their value will remain 0
and extract_table_params() will ignore them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-12-peter.maydell@linaro.org
The MemoryRegionOps gicv3_its_translation_ops currently provides only
a .write_with_attrs function, because the only register in this
region is the write-only GITS_TRANSLATER. However, if you don't
provide a read function and the guest tries reading from this memory
region, QEMU will crash because
memory_region_read_with_attrs_accessor() calls a NULL pointer.
Add a read function which always returns 0, to cover both bogus
attempts to read GITS_TRANSLATER and also reads from the rest of the
region, which is documented to be reserved, RES0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-11-peter.maydell@linaro.org
The GICR_CTLR.CES bit is a read-only bit which is set to 1 to indicate
that the GICR_CTLR.EnableLPIs bit can be written to 0 to disable
LPIs (as opposed to allowing LPIs to be enabled but not subsequently
disabled). Our implementation permits this, so advertise it
by setting CES to 1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-10-peter.maydell@linaro.org
The ITS-related parts of the redistributor code make some checks for
whether registers like GICR_PROPBASER and GICR_PENDBASER are zero.
There is no requirement in the specification for treating zeroes in
these address registers specially -- they contain guest physical
addresses and it is entirely valid (if unusual) for the guest to
choose to put the tables they address at guest physical address zero.
We use these values only to calculate guest addresses, and attempts
by the guest to use a bad address will be handled by the
address_space_* functions which we use to do the loads and stores.
Remove the unnecessary checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-9-peter.maydell@linaro.org
The list of #defines for the ITS command packet numbers is neither
in alphabetical nor numeric order. Sort it into numeric order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-8-peter.maydell@linaro.org
The GICD_CTLR distributor register has enable bits which control
whether the different interrupt groups (Group 0, Non-secure Group 1
and Secure Group 1) are forwarded to the CPU. We get this right for
traditional interrupts, but forgot to account for it when adding
LPIs. LPIs are always Group 1 NS and if the EnableGrp1NS bit is not
set we must not forward them to the CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-7-peter.maydell@linaro.org
The ITS specification says that when the guest writes to GITS_CBASER
this causes GITS_CREADR to be cleared. However it does not have an
equivalent clause for GITS_CWRITER. (This is because GITS_CREADR is
read-only, but GITS_CWRITER is writable and the guest can initialize
it.) Remove the code that clears GITS_CWRITER on GITS_CBASER writes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-6-peter.maydell@linaro.org
The current ITS code clears GITS_CREADR when GITS_CTLR.ENABLED is set.
This is not correct -- guest code can validly clear ENABLED and then
set it again and expect the ITS to continue processing where it left
off. Remove the erroneous assignment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-5-peter.maydell@linaro.org
In our implementation, all ITSes connected to a GIC share a single
AddressSpace, which we keep in the GICv3State::dma_as field and
initialized based on the GIC's 'sysmem' property. The right place
to set it up by calling address_space_init() is therefore in the
GIC's realize method, not the ITS's realize.
This fixes a theoretical bug where QEMU hangs on startup if the board
model creates two ITSes connected to the same GIC -- we would call
address_space_init() twice on the same AddressSpace*, which creates
an infinite loop in the QTAILQ that softmmu/memory.c uses to store
its list of AddressSpaces and causes any subsequent attempt to
iterate through that list to loop forever. There aren't any board
models like that in the tree at the moment, though.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-4-peter.maydell@linaro.org
The ITS currently has no tracepoints; add a minimal set
that allows basic monitoring of guest register accesses and
reading of commands from the command queue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220122182444.724087-3-peter.maydell@linaro.org
Connect Micron Xccela mt35xu01g flashes to the OSPI flash memory
controller.
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-10-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for Micron Xccela flash mt35xu01g.
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20220121161141.14389-9-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect the OSPI flash memory controller model (including the source and
destination DMA).
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220121161141.14389-8-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of Xilinx Versal's OSPI flash memory controller.
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-7-francisco.iglesias@xilinx.com
[PMM: fixed indent]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An option on real hardware when embedding a DMA engine into a peripheral
is to make the peripheral control the engine through a custom DMA control
(hardware) interface between the two. Software drivers in this scenario
configure and trigger DMA operations through the controlling peripheral's
register API (for example, writing a specific bit in a register could
propagate down to a transfer start signal on the DMA control interface).
At the same time the status, results and interrupts for the transfer might
still be intended to be read and caught through the DMA engine's register
API (and signals).
This patch adds a class 'read' method for allowing to start read transfers
from peripherals embedding and controlling the Xilinx CSU DMA engine as in
above scenario.
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-6-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an orgate and 'or' the interrupts from the BBRAM and RTC models.
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-3-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a model of Versal's PMC SLCR (system-level control registers).
Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20220121161141.14389-2-francisco.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The exynos4210_uart_post_load() function assumes that it is passed
the Exynos4210UartState, but it has been attached to the
VMStateDescription for the Exynos4210UartFIFO type. The result is a
SIGSEGV when attempting to load VM state for any machine type
including this device.
Fix the bug by attaching the post-load function to the VMSD for the
Exynos4210UartState. This is the logical place for it, because the
actions it does relate to the entire UART state, not just the FIFO.
Thanks to the bug reporter @TrungNguyen1909 for the clear bug
description and the suggested fix.
Fixes: c9d3396d80
("hw/char/exynos4210_uart: Implement post_load function")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/638
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151648.433736-1-peter.maydell@linaro.org
In commit d5093d9615 we added a VMStateDescription to
the TYPE_ARMV7M object, to handle migration of its Clocks.
However a cut-and-paste error meant we used the wrong struct
name in the VMSTATE_CLOCK() macro arguments. The result was
that attempting a 'savevm' might result in an assertion
failure.
Cc: qemu-stable@nongnu.org
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/803
Fixes: d5093d9615
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220120151609.433555-1-peter.maydell@linaro.org
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vof.h requires "qom/object.h" for DECLARE_CLASS_CHECKERS(),
"exec/memory.h" for address_space_read/write(),
"exec/address-spaces.h" for address_space_memory
and more importantly "cpu.h" for target_ulong.
vof.c doesn't need "exec/ram_addr.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220122003104.84391-1-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
spapr_get_fw_dev_path() is an impl of
FWPathProviderClass::get_dev_path(). This interface is used by
hw/core/qdev-fw.c via fw_path_provider_try_get_dev_path() in two
functions:
- static char *qdev_get_fw_dev_path_from_handler(), which is used only in
qdev_get_fw_dev_path_helper() and it's guarded by "if (dev &&
dev->parent_bus)";
- char *qdev_get_own_fw_dev_path_from_handler(), which is used in
softmmu/bootdevice.c in get_boot_device_path() like this:
if (dev) {
d = qdev_get_own_fw_dev_path_from_handler(dev->parent_bus, dev);
This means that, when called via softmmu/bootdevice.c, there's no check
of 'dev->parent_bus' being not NULL. The result is that the "BusState
*bus" arg of spapr_get_fw_dev_path() can potentially be NULL and if, at
the same time, "SCSIDevice *d" is not NULL, we'll hit this line:
void *spapr = CAST(void, bus->parent, "spapr-vscsi");
And we'll SIGINT because 'bus' is NULL and we're accessing bus->parent.
Adding a simple 'bus != NULL' check to guard the instances where we
access 'bus->parent' can avoid this altogether.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220121213852.30243-1-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The ldq_be_dma() routine was recently changed to return a result of
the transaction. Use it when loading the virtual structure descriptors
in the XIVE PowerNV model.
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220124081635.3672439-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pnv_phb4_translate_tve() is quite similar to pnv_phb3_translate_tve(),
and that includes the fact that 'taddr' can be considered uninitialized
when throwing the "TCE access fault" error because, in theory, the loop
that sets 'taddr' can be skippable due to 'lev' being an signed int.
No one complained about this specific case yet, but since we took the
time to handle the same situtation in pnv_phb3_translate_tve(), let's
replicate it here as well.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220127122234.842145-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'taddr' variable is left unintialized, being set only inside the
"while ((lev--) >= 0)" loop where we get the TCE address. The 'lev' var
is an int32_t that is being initiliazed by the GETFIELD() macro, which
returns an uint64_t.
For a human reader this means that 'lev' will always be positive or zero.
But some compilers may beg to differ. 'lev' being an int32_t can in theory
be set as negative, and the "while ((lev--) >= 0)" loop might never be
reached, and 'taddr' will be left unitialized. This can cause phb3_error()
to use 'taddr' uninitialized down below:
if ((is_write & !(tce & 2)) || ((!is_write) && !(tce & 1))) {
phb3_error(phb, "TCE access fault at 0x%"PRIx64, taddr);
A quick way of fixing it is to use a do/while() loop. This will keep the
same semanting as the existing while() loop does and the compiler will
understand that 'taddr' will be initialized at least once.
Suggested-by: Matheus K. Ferst <matheus.ferst@eldorado.org.br>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/573
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220127122234.842145-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
If an iommu page has wrong permissions, an error message is displayed,
but the access is allowed, which is odd. This patch fixes it.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220121152350.381685-1-fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
"PowerPC Processor binding to IEEE 1275" says in
"8.2.1. Initial Register Values" that the initial state is defined as
32bit so do it for both SLOF and VOF.
This should not cause behavioral change as SLOF switches to 64bit very
early anyway. As nothing enforces LE anywhere, this drops it for VOF.
The goal is to make VOF work with TCG as otherwise it barfs with
qemu: fatal: TCG hflags mismatch (current:0x6c000004 rebuilt:0x6c000000)
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220107072423.2278113-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The SGX NUMA patches were merged into Qemu 7.0 release, we need
clarify detailed version history information and also change
some related comments, which make SGX related comments clearer.
The QMP command schema promises backwards compatibility as standard.
We temporarily restore "@section-size", which can avoid incompatible
API breakage. The "@section-size" will be deprecated in 7.2 version.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220120223104.437161-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, a particular mapcache entry may be mapped 256 times
causing the lock field to wrap to 0. For example, this may happen when
using emulated NVME and the guest submits a large scatter-gather write.
At this point, the entry map be remapped causing QEMU to write the wrong
data or crash (since remap is not atomic).
Avoid this overflow by increasing the lock field to a uint32_t and also
detect it and abort rather than continuing regardless.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20220124104450.152481-1-ross.lagerwall@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
commit f37f29d314 "xen: slightly simplify bufioreq handling" hard
coded setting req.count = 1 during initial field setup before the main
loop. This missed a subtlety that an early exit from the loop when
there are no ioreqs to process, would have req.count == 0 for the return
value. handle_buffered_io() would then remove state->buffered_io_timer.
Instead handle_buffered_iopage() is basically always returning true and
handle_buffered_io() always re-setting the timer.
Restore the disabling of the timer by introducing a new handled_ioreq
boolean and use as the return value. The named variable will more
clearly show the intent of the code.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20211210193434.75566-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The functions are only used within their respective source files, so no
need for exporting.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20220116122327.73048-1-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that RISC-V Spike machine can use BIN BIOS images, we remove
the macros used for ELF BIOS image names.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, we have to use OpenSBI firmware ELF as bios for the spike
machine because the HTIF console requires ELF for parsing "fromhost"
and "tohost" symbols.
The latest OpenSBI can now optionally pick-up HTIF register address
from HTIF DT node so using this feature spike machine can now use
OpenSBI firmware BIN as bios.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Get kernel and fdt start address in virt.c, and pass them to KVM
when cpu reset. Add kvm_riscv.h to place riscv specific interface.
In addition, PLIC is created without M-mode PLIC contexts when KVM
is enabled.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-id: 20220112081329.1835-7-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following changes:
1. Fixes the incorrectly set CTRL register address. As
per [1] https://docs.opentitan.org/hw/ip/rv_timer/doc/#register-table
The CTRL register is @ 0x04.
This was found when attempting to fixup a bug where a timer_interrupt
was not serviced on TockOS-OpenTitan.
2. Adds ALERT_TEST register as documented on [1], adding repective
switch cases to error handle and later implement functionality.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20220111071025.4169189-2-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The following change was made to rectify incorrectly set stride length
on the PLIC [1]. Where it should be 32bit and not 24bit (0x18). This was
discovered whilst attempting to fix a bug where a timer_interrupt was
not serviced on TockOS-OpenTitan.
[1] https://docs.opentitan.org/hw/top_earlgrey/ip_autogen/rv_plic/doc/
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 20220111071025.4169189-1-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This change fixes a bug where a write only register is read.
As per https://docs.opentitan.org/hw/ip/rv_timer/doc/#register-table
the 'INTR_TEST0' register is write only.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220110051606.4031241-1-alistair.francis@opensource.wdc.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* hw/intc/arm_gicv3_its: Fix various minor bugs
* hw/arm/aspeed: Add the i3c device to the AST2600 SoC
* hw/arm: kudo: add lm75s behind bus 1 switch at 75
* hw/arm/virt: Fix support for running guests on hosts
with restricted IPA ranges
* hw/intc/arm_gic: Allow reset of the running priority
* hw/intc/arm_gic: Implement read of GICC_IIDR
* hw/arm/virt: Support for virtio-mem-pci
* hw/arm/virt: Support CPU cluster on ARM virt machine
* docs/can: convert to restructuredText
* hw/net: Move MV88W8618 network device out of hw/arm/ directory
* hw/arm/virt: KVM: Enable PAuth when supported by the host
-----BEGIN PGP SIGNATURE-----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=hPal
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20220120-1' into staging
target-arm:
* hw/intc/arm_gicv3_its: Fix various minor bugs
* hw/arm/aspeed: Add the i3c device to the AST2600 SoC
* hw/arm: kudo: add lm75s behind bus 1 switch at 75
* hw/arm/virt: Fix support for running guests on hosts
with restricted IPA ranges
* hw/intc/arm_gic: Allow reset of the running priority
* hw/intc/arm_gic: Implement read of GICC_IIDR
* hw/arm/virt: Support for virtio-mem-pci
* hw/arm/virt: Support CPU cluster on ARM virt machine
* docs/can: convert to restructuredText
* hw/net: Move MV88W8618 network device out of hw/arm/ directory
* hw/arm/virt: KVM: Enable PAuth when supported by the host
# gpg: Signature made Thu 20 Jan 2022 16:12:12 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20220120-1: (38 commits)
hw/intc/arm_gicv3: Check for !MEMTX_OK instead of MEMTX_ERROR
hw/intc/arm_gicv3_its: Range-check ICID before indexing into collection table
hw/intc/arm_gicv3_its: Check indexes before use, not after
hw/intc/arm_gicv3_its: Factor out "find address of table entry" code
hw/intc/arm_gicv3_its: Fix return codes in process_mapd()
hw/intc/arm_gicv3_its: Fix return codes in process_mapc()
hw/intc/arm_gicv3_its: Fix return codes in process_mapti()
hw/intc/arm_gicv3_its: Refactor process_its_cmd() to reduce nesting
hw/intc/arm_gicv3_its: Fix return codes in process_its_cmd()
hw/intc/arm_gicv3_its: Use enum for return value of process_* functions
hw/intc/arm_gicv3_its: Don't use data if reading command failed
hw/intc/arm_gicv3_its: Fix handling of process_its_cmd() return value
hw/intc/arm_gicv3_its: Convert int ID check to num_intids convention
hw/intc/arm_gicv3_its: Fix event ID bounds checks
hw/arm/aspeed: Add the i3c device to the AST2600 SoC
hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model.
hw/arm: kudo add lm75s behind bus 1 switch at 75
hw/arm/virt: Drop superfluous checks against highmem
hw/arm/virt: Disable highmem devices that don't fit in the PA range
hw/arm/virt: Use the PA range to compute the memory map
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Quoting Peter Maydell:
"These MEMTX_* aren't from the memory transaction
API functions; they're just being used by gicd_readl() and
friends as a way to indicate a success/failure so that the
actual MemoryRegionOps read/write fns like gicv3_dist_read()
can log a guest error."
We are going to introduce more MemTxResult bits, so it is
safer to check for !MEMTX_OK rather than MEMTX_ERROR.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In process_its_cmd(), we read an ICID out of the interrupt table
entry, and then use it as an index into the collection table. Add a
check that it is within range for the collection table first.
This check is not strictly necessary, because:
* we range check the ICID from the guest before writing it into
the interrupt table entry, so the the only way to get an
out of range ICID in process_its_cmd() is if a badly-behaved
guest is writing directly to the interrupt table memory
* the collection table is in guest memory, so QEMU won't fall
over if we read off the end of it
However, it seems clearer to include the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220111171048.3545974-14-peter.maydell@linaro.org
In a few places in the ITS command handling functions, we were
doing the range-check of an event ID or device ID only after using
it as a table index; move the checks to before the uses.
This misordering wouldn't have very bad effects because the
tables are in guest memory anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220111171048.3545974-13-peter.maydell@linaro.org
The ITS has several tables which all share a similar format,
described by the TableDesc struct: the guest may configure them
to be a single-level table or a two-level table. Currently we
open-code the process of finding the table entry in all the
functions which read or write the device table or the collection
table. Factor out the "get the address of the table entry"
logic into a new function, so that the code which needs to
read or write a table entry only needs to call table_entry_addr()
and then perform a suitable load or store to that address.
Note that the error handling is slightly complicated because
we want to handle two cases differently:
* failure to read the L1 table entry should end up causing
a command stall, like other kinds of DMA error
* an L1 table entry that says there is no L2 table for this
index (ie whose valid bit is 0) must result in us treating
the table entry as not-valid on read, and discarding
writes (this is mandated by the spec)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220111171048.3545974-12-peter.maydell@linaro.org
Fix process_mapd() to consistently return CMD_STALL for memory
errors and CMD_CONTINUE for parameter errors, as we claim in the
comments that we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-11-peter.maydell@linaro.org
Fix process_mapc() to consistently return CMD_STALL for memory
errors and CMD_CONTINUE for parameter errors, as we claim in the
comments that we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-10-peter.maydell@linaro.org
Fix process_mapti() to consistently return CMD_STALL for memory
errors and CMD_CONTINUE for parameter errors, as we claim in the
comments that we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-9-peter.maydell@linaro.org
Refactor process_its_cmd() so that it consistently uses
the structure
do thing;
if (error condition) {
return early;
}
do next thing;
rather than doing some of the work nested inside if (not error)
code blocks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-8-peter.maydell@linaro.org
Fix process_its_cmd() to consistently return CMD_STALL for
memory errors and CMD_CONTINUE for parameter errors, as
we claim in the comments that we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-7-peter.maydell@linaro.org
When an ITS detects an error in a command, it has an
implementation-defined (CONSTRAINED UNPREDICTABLE) choice of whether
to ignore the command, proceeding to the next one in the queue, or to
stall the ITS command queue, processing nothing further. The
behaviour required when the read of the command packet from memory
fails is less clearly documented, but the same set of choices as for
command errors seem reasonable.
The intention of the QEMU implementation, as documented in the
comments, is that if we encounter a memory error reading the command
packet or one of the various data tables then we should stall, but
for command parameter errors we should ignore the queue and continue.
However, we don't actually do this. To get the desired behaviour,
the various process_* functions need to return true to cause
process_cmdq() to advance to the next command and keep processing,
and false to stall command processing. What they mostly do is return
false for any kind of error.
To make the code clearer, replace the 'bool' return from the process_
functions with an enum which may be either CMD_STALL or CMD_CONTINUE.
In this commit no behaviour changes; in subsequent commits we will
adjust the error-return paths for the process_ functions one by one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220111171048.3545974-6-peter.maydell@linaro.org
In process_cmdq(), we read 64 bits of the command packet, which
contain the command identifier, which we then switch() on to dispatch
to an appropriate sub-function. However, if address_space_ldq_le()
reports a memory transaction failure, we still read the command
identifier out of the data and switch() on it. Restructure the code
so that we stop immediately (stalling the command queue) in this
case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220111171048.3545974-5-peter.maydell@linaro.org
process_its_cmd() returns a bool, like all the other process_ functions.
However we were putting its return value into 'res', not 'result',
which meant we would ignore it when deciding whether to continue
or stall the command queue. Fix the typo.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220111171048.3545974-4-peter.maydell@linaro.org
The bounds check on the number of interrupt IDs is correct, but
doesn't match our convention; change the variable name, initialize it
to the 2^n value rather than (2^n)-1, and use >= instead of > in the
comparison.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220111171048.3545974-3-peter.maydell@linaro.org
In process_its_cmd() and process_mapti() we must check the
event ID against a limit defined by the size field in the DTE,
which specifies the number of ID bits minus one. Convert
this code to our num_foo convention:
* change the variable names
* use uint64_t and 1ULL when calculating the number
of valid event IDs, because DTE.SIZE is 5 bits and
so num_eventids may be up to 2^32
* fix the off-by-one error in the comparison
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220111171048.3545974-2-peter.maydell@linaro.org
Aspeed 2600 SDK enables I3C support by default. The I3C driver will try
to reset the device controller and set it up through device address table
register. This dummy model responds to these registers with default values
as listed in the ast2600v10 datasheet chapter 54.2.
This avoids a guest machine kernel panic due to referencing an
invalid kernel address if the device address table register isn't
set correctly.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Graeme Gregory <quic_ggregory@quicinc.com>
Message-id: 20220111084546.4145785-2-troy_lee@aspeedtech.com
[PMM: tidied commit message; fixed format strings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the devices present in the extended memory map are checked
against the available PA space and disabled when they don't fit,
there is no need to keep the same checks against highmem, as
highmem really is a shortcut for the PA space being 32bit.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-id: 20220114140741.1358263-7-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In order to only keep the highmem devices that actually fit in
the PA range, check their location against the range and update
highest_gpa if they fit. If they don't, mark them as disabled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220114140741.1358263-6-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The highmem attribute is nothing but another way to express the
PA range of a VM. To support HW that has a smaller PA range then
what QEMU assumes, pass this PA range to the virt_set_memmap()
function, allowing it to correctly exclude highmem devices
if they are outside of the PA range.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220114140741.1358263-5-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even when the VM is configured with highmem=off, the highest_gpa
field includes devices that are above the 4GiB limit.
Similarily, nothing seem to check that the memory is within
the limit set by the highmem=off option.
This leads to failures in virt_kvm_type() on systems that have
a crippled IPA range, as the reported IPA space is larger than
what it should be.
Instead, honor the user-specified limit to only use the devices
at the lowest end of the spectrum, and fail if we have memory
crossing the 4GiB limit.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-id: 20220114140741.1358263-4-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just like we can control the enablement of the highmem PCIe region
using highmem_ecam, let's add a control for the highmem GICv3
redistributor region.
Similarily to highmem_ecam, these redistributors are disabled when
highmem is off.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220114140741.1358263-3-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just like we can control the enablement of the highmem PCIe ECAM
region using highmem_ecam, let's add a control for the highmem
PCIe MMIO region.
Similarily to highmem_ecam, this region is disabled when highmem
is off.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220114140741.1358263-2-maz@kernel.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When running Linux on a machine with GICv2, the kernel can crash while
processing an interrupt and can subsequently start a kdump kernel from
the active interrupt handler. In such a case, the crashed kernel might
not gracefully signal the end of interrupt to the GICv2 hardware. The
kdump kernel will however try to reset the GIC state on startup to get
the controller into a sane state, in particular the kernel writes ones
to GICD_ICACTIVERn and wipes out GICC_APRn to make sure that no
interrupt is active.
The patch adds a logic to recalculate the running priority when
GICC_APRn/GICC_NSAPRn is written which makes sure that the mentioned
reset works with the GICv2 emulation in QEMU too and the kdump kernel
starts receiving interrupts.
The described scenario can be reproduced on an AArch64 QEMU virt machine
with a kdump-enabled Linux system by using the softdog module. The kdump
kernel will hang at some point because QEMU still thinks the running
priority is that of the timer interrupt and asserts no new interrupts to
the system:
$ modprobe softdog soft_margin=10 soft_panic=1
$ cat > /dev/watchdog
[Press Enter to start the watchdog, wait for its timeout and observe
that the kdump kernel hangs on startup.]
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-id: 20220113151916.17978-3-ppavlu@suse.cz
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement support for reading GICC_IIDR. This register is used by the
Linux kernel to recognize that GICv2 with GICC_APRn is present.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Message-id: 20220113151916.17978-2-ppavlu@suse.cz
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This supports virtio-mem-pci device on "virt" platform, by simply
following the implementation on x86.
* This implements the hotplug handlers to support virtio-mem-pci
device hot-add, while the hot-remove isn't supported as we have
on x86.
* The block size is 512MB on ARM64 instead of 128MB on x86.
* It has been passing the tests with various combinations like 64KB
and 4KB page sizes on host and guest, different memory device
backends like normal, transparent huge page and HugeTLB, plus
migration.
Co-developed-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-id: 20220111063329.74447-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The default block size is same as to the THP size, which is either
retrieved from "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size"
or hardcoded to 2MB. There are flaws in both mechanisms and this
intends to fix them up.
* When "/sys/kernel/mm/transparent_hugepage/hpage_pmd_size" is
used to getting the THP size, 32MB and 512MB are valid values
when we have 16KB and 64KB page size on ARM64.
* When the hardcoded THP size is used, 2MB, 32MB and 512MB are
valid values when we have 4KB, 16KB and 64KB page sizes on
ARM64.
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-id: 20220111063329.74447-2-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support CPU cluster topology level in generation of ACPI
Processor Properties Topology Table (PPTT).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-6-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g_queue APIs to reduce the nested loops and code indentation
with the processor hierarchy levels increasing. Consenquently,
it's more scalable to add new topology level to build_pptt.
No functional change intended.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-4-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support one cluster level between core and physical package in the
cpu-map of Arm/virt devicetree. This is also consistent with Linux
Doc "Documentation/devicetree/bindings/cpu/cpu-topology.txt".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-3-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARM64 machines like Kunpeng Family Server Chips have a level
of hardware topology in which a group of CPU cores share L3
cache tag or L2 cache. For example, Kunpeng 920 typically
has 6 or 8 clusters in each NUMA node (also represent range
of CPU die), and each cluster has 4 CPU cores. All clusters
share L3 cache data, but CPU cores in each cluster share a
local L3 tag.
Running a guest kernel with Cluster-Aware Scheduling on the
Hosts which have physical clusters, if we can design a vCPU
topology with cluster level for guest kernel and then have
a dedicated vCPU pinning, the guest will gain scheduling
performance improvement from cache affinity of CPU cluster.
So let's enable the support for this new parameter on ARM
virt machines. After this patch, we can define a 4-level
CPU hierarchy like: cpus=*,maxcpus=*,sockets=*,clusters=*,
cores=*,threads=*.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-2-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Marvell 88W8618 network device is hidden in the Musicpal
machine. Move it into a new unit file under the hw/net/ directory.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220107184429.423572-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are going to move this code, so fix its style first to avoid:
ERROR: spaces required around that '/' (ctx:VxV)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220107184429.423572-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Marvell 88W8618 is a system-on-chip with an ARM core.
We implement its audio codecs and network interface.
Homogeneous SoC Kconfig are usually defined in the hw/$ARCH
directory. Move it there.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220107184429.423572-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to QEMU parameter, set initial PC to the entry of
the loaded kernel.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220115203725.3834712-4-laurent@vivier.eu>
When the mem_size of the segment is bigger than the file_size,
and if this space doesn't overlap another segment, it needs
to be cleared.
This bug is very similar to the one we had for linux-user,
22d113b52f ("linux-user: Fix loading of BSS segments"),
where .bss section is encoded as an extension of the the data
one by setting the segment p_memsz > p_filesz.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
[PMD: Use recently added address_space_set()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220115203725.3834712-3-laurent@vivier.eu>
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmHm7y4ACgkQ+9DbCVqe
KkSsDwgAgWiOUtnPxNnZ3PuLQpIDCGSotjshCXo9PhPu/SWedvMfTftPU+g3wxbl
+A2GZcNnVPaOrJo7hfDtOtir9UJUFTmyv8KtPhUYmtxxiv3HWM1RvgrBQnMEvo5A
GFAq6jSFclH4HTSxz4FHbEl0TM3feQbSfbMWI6Q1Q+aPm8hWSzhClIqBCwsJJdm8
hi76BE9o94BtvA6Qv2CoPvGsOzpV0X0VXaljf1W927BzJu+b0wEGwIm61+eovNsh
DS2kDZk+PpiYeRN/oC40Z6ozR/Lf/jZ/87AnN3gV/yLDwa5cafA+GtmcKMx1IJIc
BVm0bJo+KzHfYiVjYTJhsU7C2W71PA==
=uBQq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-7.0-180122-2' into staging
Various testing and other misc updates:
- fix compiler warnings with ui and sdl
- update QXL/spice dependancy
- skip I/O tests on Alpine
- update fedora image to latest version
- integrate lcitool and regenerate docker images
- favour CONFIG_LINUX_USER over CONFIG_LINUX
- add libfuse3 dependencies to docker images
- add dtb-kaslr-seed control knob to virt machine
- fix build breakage from HMP update
- update docs for C standard and suffix usage
- add more logging for debugging user hole finding
- expand reserve for brk() for static 64 bit programs
- fix bug with linux-user hole calculation
- avoid affecting flags when printing results in float tests
- add float reference files for ppc64
- update FreeBSD to 12.3
- add bison dependancy to tricore images
# gpg: Signature made Tue 18 Jan 2022 16:47:42 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-7.0-180122-2: (31 commits)
docker: include bison in debian-tricore-cross
FreeBSD: Upgrade to 12.3 release
test/tcg/ppc64le: Add float reference files
tests/tcg/multiarch: Read fp flags before printf
linux-user: don't adjust base of found hole
linux-user/elfload: add extra logging for hole finding
linux-user: expand reserved brk space for 64bit guests
docs/devel: more documentation on the use of suffixes
docs/devel: update C standard to C11
monitor: move x-query-profile into accel/tcg to fix build
hw/arm: add control knob to disable kaslr_seed via DTB
tests/docker: add libfuse3 development headers
tests/tcg: use CONFIG_LINUX_USER, not CONFIG_LINUX
tests/docker: auto-generate alpine.docker with lcitool
tests/docker: fully expand the alpine package list
tests/docker: fix sorting of alpine image package lists
tests/docker: updates to alpine package list
.gitlab-ci.d/cirrus: auto-generate variables with lcitool
tests/docker: remove ubuntu.docker container
tests/docker: auto-generate opensuse-leap.docker with lcitool
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* More documentation updates (Leonardo)
* Fixes for the 7448 CPU (Fabiano and Cedric)
* Final removal of 403 CPUs and the .load_state_old handler (Cedric)
* More cleanups of PHB4 models (Daniel and Cedric)
-----BEGIN PGP SIGNATURE-----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=M4/2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220118' into staging
ppc 7.0 queue:
* More documentation updates (Leonardo)
* Fixes for the 7448 CPU (Fabiano and Cedric)
* Final removal of 403 CPUs and the .load_state_old handler (Cedric)
* More cleanups of PHB4 models (Daniel and Cedric)
# gpg: Signature made Tue 18 Jan 2022 11:59:16 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220118: (31 commits)
ppc/pnv: Remove PHB4 version property
ppc/pnv: Add a 'rp_model' class attribute for the PHB4 PEC
ppc/pnv: Move root port allocation under pnv_pec_default_phb_realize()
ppc/pnv: rename pnv_pec_stk_update_map()
ppc/pnv: remove PnvPhb4PecStack object
ppc/pnv: make PECs create and realize PHB4s
ppc/pnv: remove PnvPhb4PecStack::stack_no
ppc/pnv: move default_phb_realize() to pec_realize()
ppc/pnv: remove stack pointer from PnvPHB4
ppc/pnv: reduce stack->stack_no usage
ppc/pnv: introduce PnvPHB4 'pec' property
ppc/pnv: move phb_regs_mr to PnvPHB4
ppc/pnv: move nest_regs_mr to PnvPHB4
ppc/pnv: change pnv_pec_stk_update_map() to use PnvPHB4
ppc/pnv: move nest_regs[] to PnvPHB4
ppc/pnv: move mmbar0/mmbar1 and friends to PnvPHB4
ppc/pnv: change pnv_phb4_update_regions() to use PnvPHB4
ppc/pnv: move intbar to PnvPHB4
ppc/pnv: move phbbar to PnvPHB4
ppc/pnv: move PCI registers to PnvPHB4
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generally a guest needs an external source of randomness to properly
enable things like address space randomisation. However in a trusted
boot environment where the firmware will cryptographically verify
components having random data in the DTB will cause verification to
fail. Add a control knob so we can prevent this being added to the
system DTB.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome@forissier.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220105135009.1584676-22-alex.bennee@linaro.org>
spice updated the spelling (and arguments) of "attache_worker" in
0.15.0. Update QEMU to match, preventing -Wdeprecated-declarations
compilations from reporting build errors.
See also:
974692bda1
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215141949.3512719-3-berrange@redhat.com>
Message-Id: <20220105135009.1584676-3-alex.bennee@linaro.org>
In the past s390 used a fixed command line length of 896 bytes. This has changed
with the Linux commit 5ecb2da660ab ("s390: support command lines longer than 896
bytes"). There is now a parm area indicating the maximum command line size. This
parm area has always been initialized to zero, so with older kernels this field
would read zero and we must then assume that only 896 bytes are available.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@de.ibm.com>
Message-Id: <20211122112909.18138-1-mhartmay@linux.ibm.com>
[thuth: Cosmetic fixes, and use PRIu64 instead of %lu]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Grab the PHB version from the PEC class directly when needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220117122753.1655504-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PHB5 will introduce its own root port model. Prepare ground for it.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220117122753.1655504-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The root port device is currently created and attached to the PHB
early in pnv_phb4_realize(). Do it under pnv_pec_default_phb_realize()
after the PHB is fully realized. It's cleaner and avoids an extra
test on defaults_enabled().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220117122753.1655504-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This function does not use 'stack' anymore. Rename it to
pnv_pec_phb_update_map().
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220114180719.52117-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All the complexity that was scattered between PnvPhb4PecStack and
PnvPHB4 are now centered in the PnvPHB4 device. PnvPhb4PecStack does not
serve any purpose in the current code base.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220114180719.52117-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch changes the design of the PEC device to create and realize PHB4s
instead of PecStacks. After all the recent changes, PHB4s now contain all
the information needed for their proper functioning, not relying on PecStack
in any capacity.
All changes are being made in a single patch to avoid renaming parts of
the PecState and leaving the code in a strange way. E.g. rename
PecClass->num_stacks to num_phbs, which would then read a
pnv_pec_num_stacks[] array. To avoid mixing the old and new design more
than necessary it's clearer to do these changes in a single step.
The name changes made are:
- in PnvPhb4PecState:
* rename 'num_stacks' to 'num_phbs'
* remove the pec->stacks[] array. Current code relies on the
pec->stacks[] obj acting as a simple container, without ever accessing
pec->stacks[] for any other purpose. Instead of converting this into a
pec->phbs[] array, remove it
- in PnvPhb4PecClass, rename *num_stacks to *num_phbs;
- pnv_pec_num_stacks[] is renamed to pnv_pec_num_phbs[].
The logical changes:
- pnv_pec_default_phb_realize():
* init and set the properties of the PnvPHB4 qdev
* do not use stack->phb anymore;
- pnv_pec_realize():
* use the new default_phb_realize() to init/realize each PHB if
running with defaults;
- pnv_pec_instance_init(): removed since we're creating the PHBs during
pec_realize();
- pnv_phb4_get_stack():
* renamed to pnv_phb4_get_pec() and returns a PnvPhb4PecState*;
- pnv_phb4_realize(): use 'phb->pec' instead of 'stack'.
This design change shouldn't caused any behavioral change in the runtime
of the machine.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220114180719.52117-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pnv_pec_default_phb_realize() stopped using it after the previous patch and
no one else is using it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220114180719.52117-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Move the current pnv_pec_stk_default_phb_realize() call to
pec_realize(), renaming the function to pnv_pec_default_phb_realize(),
and set the PHB attributes using the PEC object directly.
This will be important to allow for PECs devices to handle PHB4s
directly later on.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220114180719.52117-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This pointer was being used for two reasons: pnv_phb4_update_regions()
was using it to access the PHB and phb4_realize() was using it as a way
to determine if the PHB was user created.
We can determine if the PHB is user created via phb->pec, introduced in
the previous patch, and pnv_phb4_update_regions() is no longer using
stack->phb.
Remove the pointer from the PnvPHB4 device.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220114180719.52117-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'stack->stack_no' represents the order that a stack appears in its PEC.
Its primary use is in XSCOM address space calculation in
pnv_phb4_xscom_realize() when calculating the memory region offset.
This attribute is redundant with phb->phb_id, which is calculated via
pnv_phb4_pec_get_phb_id() using stack->stack_no information. It'll also
be awkward to assign it when dealing with PECs and PHBs only in a future
patch.
A new pnv_phb4_get_phb_stack_no() helper is introduced to eliminate most
of the stack->stack_no uses we have. The only use left after this patch
is during pnv_pec_stk_default_phb_realize() when calculating phb_id,
which will also handled in the next patches.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220114180719.52117-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This property will track the owner PEC of this PHB. For now it's
redundant since we can retrieve the PEC via phb->stack->pec but it
will not be redundant when we get rid of the stack device.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220114180719.52117-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
After recent changes, this MemoryRegion can be migrated to PnvPHB4
without too much trouble.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-11-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We're now able to cleanly move nest_regs_mr to the PnvPHB4 device.
One thing of notice here is the need to use a phb->stack->pec pointer
because pnv_pec_stk_nest_xscom_write requires a PEC object. Another
thing that can be noticed in the use of 'stack->stack_no' that still
remains throughout the XSCOM code.
After moving all MemoryRegions to the PnvPHB4 object, this illustrates
what is the remaining role of the stack: provide a PEC pointer and the
'stack_no' information. If we can provide these in the PnvPHB4 object
instead (spoiler: we can, and we will), the PnvPhb4PecStack device will
be deprecated and can be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
stack->nest_regs_mr wasn't migrated to PnvPHB4 together with phb->nest_regs[] in
the previous patch. We were unable to cleanly convert its write MemoryRegionOps,
pnv_pec_stk_nest_xscom_write(), to use PnvPHB4 instead of PnvPhb4PecStack due to
pnv_pec_stk_update_map() using a stack. Thing is, we're now able to convert
pnv_pec_stk_update_map() because of what the did in previous patch.
The need for this intermediate step is a good example of the interconnected
relationship between stack and phb that we aim to cleanup.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
stack->nest_regs[] is used in several XSCOM functions and it's one of
the main culprits of having to deal with stack->phb pointers around the
code.
Sure, we're having to add 2 extra stack->phb pointers to ease
nest_regs[] migration to PnvPHB4. They'll be dealt with shortly.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
These 2 MemoryRegions, together with mmio(0|1)_base and mmio(0|1)_size
variables, are used together in the same functions. We're better of
moving them all in a single step.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The function does not rely on stack for anything it does anymore. This
is also one less instance of 'stack->phb' that we need to worry about.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This MemoryRegion can also be moved in a single step.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This MemoryRegion is simple enough to be moved in a single step.
A 'stack->phb' pointer had to be introduced in pnv_pec_stk_update_map()
because this function isn't ready to be fully converted to use a PnvPHB4
pointer instead. This will be dealt with in the following patches.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Previous patch changed pnv_pec_stk_pci_xscom_read() and
pnv_pec_stk_pci_xscom_write() to use a PnvPHB4 opaque, making it easier
to move both pci_regs[] and the pci_regs_mr MemoryRegion to the PnvHB4
object.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The current relationship between PnvPhb4PecStack and PnvPHB4 objects is
overly complex. Recent work done in pnv_phb4.c and pnv_phb4_pec.c shows
that the stack obj role in the overall design is more of a placeholder for
its 'phb' object, having no atributes that stand on its own. This became
clearer after pnv-phb4 user creatable devices were implemented.
What remains now are a lot of stack->phb and phb->stack pointers
throughout .read and .write callbacks of MemoryRegionOps that are being
initialized in phb4_realize() time. stk_realize() is a no-op if the
machine is being run with -nodefaults.
The first step of trying to decouple the stack and phb relationship is
to move the MemoryRegionOps that belongs to PnvPhb4PecStack to PhbPHB4.
Unfortunately this can't be done without some preliminary steps to
change the usage of 'stack' and replace it with 'phb' in these
read/write callbacks.
This patch starts this process by using a PnvPHB4 opaque in
pnv_pec_stk_pci_xscom_ops instead of PnvPhb4PecStack.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220113192952.911188-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-10-f4bug@amsat.org>
The 'resid' field is slightly confusing and could be
interpreted as some ID. Rename it as 'residual' which
is clearer to review. No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Various APIs use 'pval' naming for 'pointer to val'.
rdma_pci_dma_map() uses 'plen' for 'PCI length', but since
'PCI' is already explicit in the function name, simplify
and rename the argument 'len'. No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Message-Id: <20220111184309.28637-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This code is easier to review using the load/store API.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211218111912.1499377-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add the vmstate for the ETRAX timers.
This is in theory a migration compatibility break
for the 'AXIS devboard 88' CRIS machine.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211106105623.510868-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
fw_cfg QOM interface is required by system emulation and
qemu-storage-daemon. User-mode emulation doesn't need it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-3-f4bug@amsat.org>
memory_region_is_mapped() is the wrong check, we actually want to check
whether the backend is already marked mapped.
For example, memory regions mapped via an alias, such as NVDIMMs,
currently don't make memory_region_is_mapped() return "true". As the
machine is initialized before any memory devices (and thereby before
NVDIMMs are initialized), this isn't a fix but merely a cleanup.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211102164317.45658-2-david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.
Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.
Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.
The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.
One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This change adds support for horizontal scroll to ps/2 mouse device
code. The code is implemented to match the logic of linux kernel
which is used as a reference.
Signed-off-by: Dmitry Petrov <dpetroff@gmail.com>
Message-Id: <20220108153947.171861-2-dpetroff@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously, the large modes (>1080p) that were generated by Qemu in its EDID
were all 50 Hz. If we provide them to a Guest OS and the user selects
one of these modes, then the OS by default only gets 50 FPS. This is
especially true for Windows OS. With this patch, we are now exposing a
3840x2160@60 Hz which will allow the guest OS to get 60 FPS.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Satyeshwar Singh <satyeshwar.singh@intel.com>
Message-Id: <20211116221103.27128-1-dongwon.kim@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.
One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.
Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.
None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.
In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).
In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.
The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.
This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.
Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga_mmio_init() is used only one time and not very helpful,
inline and remove it.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-5-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce TYPE_VGA_MMIO, a sysbus device.
While there is no change in the vga_mmio_init()
interface, this is a migration compatibility break
of the MIPS Acer Pica 61 Jazz machine (pica61).
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206224528.563588-4-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Inline vga_mm_init() in vga_mmio_init() to simplify the
next patch review. Kind of.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no ISA bus part in the MMIO VGA device, so rename:
* hw/display/vga-isa-mm.c -> hw/display/vga-mmio.c
* CONFIG_VGA_ISA_MM -> CONFIG_VGA_MMIO
* ISAVGAMMState -> VGAMmioState
* isa_vga_mm_init() -> vga_mmio_init()
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211206224528.563588-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise we run the error handling code even for successful requests.
Fixes: 13b250b12a ("uas: add stream number sanity checks.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211210080659.2537084-1-kraxel@redhat.com>
Quote from:
High Definition Audio Specification 1.0a, section 3.3.35
Offset 80: {IOB}SDnCTL Stream Reset (SRST): Writing a 1 causes
the corresponding stream to be reset. The Stream Descriptor
registers (except the SRST bit itself) ... are reset.
Change the code to reset the Stream Descriptor Control and Status
registers except the SRST bit.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/757
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20211226154017.6067-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A device of USB video class usually uses larger desc structure, so
use larger buffer to avoid failure. (dev-video.c is ready)
This is an unlikely code path:
1, during guest startup, guest tries to probe device.
2, run 'lsusb' command in guest(or other similar commands).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220112015835.900619-1-pizhenwei@bytedance.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Linux need to fill up the HID descriptor in order to let the driver be
emulated. The descriptor was downloaded from [1]. The patch was tested
with evtest tool on top of qemu 5.2.0 with linux kernel 4.19.208.
[1] https://github.com/linuxwacom/wacom-hid-descriptors/tree/master/Wacom%20PenPartner
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Message-Id: <20220112090125.381364-1-dario.binacchi@amarulasolutions.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that virtio-blk and virtio-scsi are ready, get rid of
the handle_aio_output() callback. It's no longer needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The difference between ->handle_output() and ->handle_aio_output() was
that ->handle_aio_output() returned a bool return value indicating
progress. This was needed by the old polling API but now that the bool
return value is gone, the two functions can be unified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prepare virtio_scsi_handle_cmd() to be used by both dataplane and
non-dataplane by making the condition for starting ioeventfd more
specific. This way it won't trigger when dataplane has already been
started.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The return value of virtio_blk_handle_vq() is no longer used. Get rid of
it. This is a step towards unifying the dataplane and non-dataplane
virtqueue handler functions.
Prepare virtio_blk_handle_output() to be used by both dataplane and
non-dataplane by making the condition for starting ioeventfd more
specific. This way it won't trigger when dataplane has already been
started.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtqueue host notifier API
virtio_queue_aio_set_host_notifier_handler() polls the virtqueue for new
buffers. AioContext previously required a bool progress return value
indicating whether an event was handled or not. This is no longer
necessary because the AioContext polling API has been split into a poll
check function and an event handler function. The event handler is only
run when we know there is work to do, so it doesn't return bool.
The VirtIOHandleAIOOutput function signature is now the same as
VirtIOHandleOutput. Get rid of the bool return value.
Further simplifications will be made for virtio-blk and virtio-scsi in
the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pnv_pec_stk_pci_xscom_write() is pnv_pec_stk_pci_xscom_ops write
callback. It writes values into regs in the stack->nest_regs[] array.
The pnv_pec_stk_pci_xscom_read read callback, on the other hand, returns
values of the stack->pci_regs[]. In fact, at this moment, the only use
of stack->pci_regs[] is in pnv_pec_stk_pci_xscom_read(). There's no code
that is written anything in stack->pci_regs[], which is suspicious.
Considering that stack->nest_regs[] is widely used by the nested
MemoryOps pnv_pec_stk_nest_xscom_ops, in both read and write callbacks,
the conclusion is that we're writing the wrong array in
pnv_pec_stk_pci_xscom_write(). This function should write stack->pci_regs[]
instead.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20220111200132.633896-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Its only callers are inside pnv_phb4.c.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This patch introduces pnv-phb4 user creatable devices that are created
in a similar manner as pnv-phb3 devices, allowing the user to interact
with the PHBs directly instead of creating PCI Express Controllers that
will create a certain amount of PHBs per controller index.
We accomplish this by doing the following:
- add a pnv_phb4_get_stack() helper to retrieve which stack an user
created phb4 would occupy;
- when dealing with an user created pnv-phb4 (detected by checking if
phb->stack is NULL at the start of phb4_realize()), retrieve its stack
and initialize its properties as done in stk_realize();
- use 'defaults_enabled()' in stk_realize() to avoid creating and
initializing a 'stack->phb' qdev that might be overwritten by an user
created pnv-phb4 device. This process is wrapped into a new helper
called pnv_pec_stk_default_phb_realize().
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
At this moment, stack->phb is the plain PnvPHB4 device itself instead of
a pointer to the device. This will present a problem when adding user
creatable devices because we can't deal with this struct and the
realize() callback from the user creatable device.
We can't get rid of this attribute, similar to what we did when enabling
pnv-phb3 user creatable devices, because pnv_phb4_update_regions() needs
to access stack->phb to do its job. This function is called twice in
pnv_pec_stk_update_map(), which is one of the nested xscom write
callbacks (via pnv_pec_stk_nest_xscom_write()). In fact,
pnv_pec_stk_update_map() code comment is explicit about how the order of
the unmap/map operations relates with the PHB subregions.
All of this indicates that this code is tied together in a way that we
either go on a crusade, featuring lots of refactories and redesign and
considerable pain, to decouple stack and phb mapping, or we allow stack
update_map operations to access the associated PHB as it is today even
after introducing pnv-phb4 user devices.
This patch chooses the latter. Instead of getting rid of stack->phb,
turn it into a PHB pointer. This will allow us to assign an user created
PHB to an existing stack later. In this process,
pnv_pec_stk_instance_init() is removed because stack->phb is being
initialized in stk_realize() instead.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 'stack->phb_regs_mr' PHB4 passthrough XSCOM initialization relies on
'stack->phb' being not NULL. Moving 'stack->phb_regs_mr' region_init()
and add_subregion() to phb4_realize() time is a natural thing to do
since it's strictly PHB related.
The remaining XSCOM initialization is also related to 'stack->phb' but
in a different manner. For instance, 'stack->nest_regs_mr'
MemoryRegionOps, 'pnv_pec_stk_nest_xscom_ops', uses
pnv_pec_stk_nest_xscom_write() as a write callback. When trying to write
the PEC_NEST_STK_BAR_EN reg, pnv_pec_stk_update_map() is called. Inside
this function, pnv_phb4_update_regions() is called twice. This function
uses 'stack->phb' to manipulate memory regions of the phb.
This is not a problem now but, when enabling user creatable phb4s, a
stack that doesn't have an associated phb (i.e. stack->phb = NULL) it
will cause a SIGINT during boot in pnv_phb4_update_regions().
All this can be avoided if all XSCOM realize is moved to phb4_realize(),
when we have certainty about the existence of 'stack->phb'. A lot of
code was moved from pnv_phb4_pec.c to pnv_phb4.c due to static constant
and variables being used but the cleaner logic is worth the trouble.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Moving all phb4 properties setup to stk_realize() keeps this logic in
a single place instead of having it scattered between stk_realize() and
pec_realize().
'phb->index' can be retrieved using stack->stack_no and
pnv_phb4_pec_get_phb_id(), deprecating the use of 'phb-id' alias that
was being used for this purpose in pec_realize().
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220111131027.599784-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Relying on stack->phb to write the xscom DT of the PEC is something that
we won't be able to do with user creatable pnv-phb4 devices.
Hopefully, this can be done by using pnv_phb4_pec_get_phb_id(), which is
already used by pnv_pec_realize() to set the phb-id of the stack. Use
the same idea in pnv_pec_dt_xscom() to write ibm,phb-index without the
need to accessing stack->phb, since stack->phb is not granted to be !=
NULL when user creatable phbs are introduced.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220110143346.455901-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The logic inside pnv_pec_phb_offset() will be useful in the next patch
to determine the stack that should contain a PHB4 device.
Move the function to pnv_phb4.c and make it public since there's no
pnv_phb4_pec.h header. While we're at it, add 'stack_index' as a
parameter and make the function return 'phb-id' directly. And rename it
to pnv_phb4_pec_get_phb_id() to be even clearer about the function
intent.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220110143346.455901-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It is not used elsewhere so that's where it belongs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PHB3s ared SysBus devices and should be allowed to be dynamically
created.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The powernv machine uses the object hierarchy to populate the device
tree and each device should be parented to the chip it belongs to.
This is not the case for user created devices which are parented to
the container "/unattached".
Make sure a PHB3 device is parented to its chip by reparenting the
object if necessary.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
PHB3 devices and PCI devices can now be added to the powernv8 machine
using :
-device pnv-phb3,chip-id=0,index=1 \
-device nec-usb-xhci,bus=pci.1,addr=0x0
The 'index' property identifies the PHB3 in the chip. In case of user
created devices, a lookup on 'chip-id' is required to assign the
owning chip.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220105212338.49899-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
pnv_phb4_rc_config_read() and pnv_phb4_rc_config_write() are asserting
the existence of the root port. The root port is now optional, and there
will be cases where a pnv-phb4 device won't have a root port attached.
Instead of asserting, check if the root port exists before read/writing
into it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We want to create only the absolutely minimal amount of devices when
running with -nodefaults. The root port is something that the machine
can boot up without. But, to do that, we need to provide a way for the
user to add them by hand.
This patch makes pnv-phb4-root-port user creatable and then uses the
pnv_phb_attach_root_port() helper to add a pnv_phb4_root_port only when
running with default settings.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This cleanups the PHB3 model a bit more since the root port is an
independent device and it will ease our task when adding user created
PHB3s.
pnv_phb_attach_root_port() is made public in pnv.c so it can be reused
with the pnv_phb4 root port later.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
A similar situation as described previously with pnv_phb3_root_port
devices also happens with pnv_phb4_root_ports.
The solution is the same: assign an unique chassis/slot combo for them.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When creating a pnv_phb3_root_port using the command line, the first
root port is created successfully, but the second fails with the
following error:
qemu-system-ppc64: -device pnv-phb3-root-port,bus=phb3-root.0,id=pcie.3:
Can't add chassis slot, error -16
This error comes from the realize() function of its parent type,
rp_realize() from TYPE_PCIE_ROOT_PORT. pcie_chassis_add_slot() fails
with -EBUSY if there's an existing PCIESlot that has the same
chassis/slot value, regardless of being in a different bus.
One way to prevent this error is simply set chassis and slot values in
the command line. However, since phb3 root buses only supports a single
root port, we can just get an unique chassis/slot value by checking
which root bus the pnv_phb3_root_port is going to be attached, get the
equivalent phb3 device and use its chip-id and index values, which are
guaranteed to be unique.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220105212338.49899-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
POWER5+ (ISA v2.03) processors are supported by the pseries machine
but they do not have Altivec instructions. Do not advertise support
for it in the DT.
To be noted that this test is in contradiction with the assert in
cap_vsx_apply().
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220105095142.3990430-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
- Add SDHC support for SD card SPI-mode (Frank Chang)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmHaCHIACgkQ4+MsLN6t
wN4sdhAAtGumw7ji0DOsVA7xP0jXi471NUaE5Y21OSsWWozbEqGpsF2cAkxSbY17
CY0cMpQUl/NqbMz0h+GwE1E3EXAChTnQSsEkTmHrWrZOZceIK20ODgiIKFpj6tls
jIN0mG4YXdo7/ODLO8F7G18zkvcwTTb0+sRA4EUQfAzNcyjWIKBR/0U0xY+cVfy6
Y+UTk6+Vf01seS4BRVqE2mec4YMjRb/fKwnXdBgMVNf3OlRqfO0wBu6l/03rf0Mo
GYwxSiDnmVZufLtSTRNL9wW4eQoDBhWrnzh7wTH6kSjNE/ylWLeZPg8uKkNC715h
H4/k1srMHRpo8PcKOaGJ1VLR3iqAVY80MdBtFKtaFaDJQFkLT2aBUI1xREA9s4uo
r6xUyfeMCb/d3l0n+gFX9+hv3LlzsfubvLT2FeIFp0K2YioG7upH0PV8eiG7okKf
AiEvidr8gU1RFk/JUWQDUsqbInpo92INk88jDsrpsgXS74RoYe5T4tR6pIjDXe8s
dKF3RdQzC0TcgW1uqobduMtrumwEhiY4WKeQvhaKQF1v1JcTQRLqrds3qHhPCayN
NiyFfue43mtZllUZw0NnezbNsiY+Fgepg4DSqvPHzszdsMHmmY7bs0mx79JoJglN
mH1xurwjo3Mvv9oeBwP1OcRM7IS4Oz/ALhi0ZNbP+MYwDGwujXU=
=PEEr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20220108' into staging
SD/MMC patches queue
- Add SDHC support for SD card SPI-mode (Frank Chang)
# gpg: Signature made Sat 08 Jan 2022 21:56:02 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/sdmmc-20220108:
hw/sd: Add SDHC support for SD card SPI-mode
hw/sd/sdcard: Rename Write Protect Group variables
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 316011b8a7.
Fixes: 316011b8a7 ("virtio-pci: decouple the single vector from the interrupt process")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 634f7c89fb.
Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Peter Maydell
Eric Auger
Richard Petri
Edgar E. Iglesias
Francisco Iglesias
Eric DeVolder
Igor Mammedov
Thomas Huth
Sven Schnelle
Helge Deller
Cédric Le Goater
Philippe Mathieu-Daudé
Daniel Henrique Barboza
Frederic Barrat
Alexey Kardashevskiy
Yang Zhong
Ross Lagerwall
Jason Andryuk
Bernhard Beschow
Anup Patel
Yifei Jiang
Wilfred Mallawa
Philippe Mathieu-Daudé
Troy Lee
Patrick Venture
Marc Zyngier
Petr Pavlu
Gavin Shan
Yanan Wang
Laurent Vivier
Alex Bennée
John Snow
Marc Hartmayer
David Hildenbrand
Vladimir Sementsov-Ogievskiy
Dmitry Petrov
Satyeshwar Singh
Daniel P. Berrangé
Gerd Hoffmann
Volker Rümelin
zhenwei pi
Dario Binacchi
Stefan Hajnoczi
Michael S. Tsirkin