virtio_mmio.h would be deleted; I am leaving it in though it was a
mistake to add it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Switch the stm32f205 SoC to create the armv7m object directly
rather than via the armv7m_init() wrapper. This fits better
with the SoC model's very QOMified design.
In particular this means we can push loading the guest image
out to the top level board code where it belongs, rather
than the SoC object having a QOM property for the filename
to load.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-11-git-send-email-peter.maydell@linaro.org
The SysTick timer isn't really part of the NVIC proper;
we just modelled it that way back when we couldn't
easily have devices that only occupied a small chunk
of a memory region. Split it out into its own device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1487604965-23220-10-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of the bitband device doing a cpu_physical_memory_read/write,
make it take a MemoryRegion which specifies where it should be
accessing, and use address_space_read/write to access the
corresponding AddressSpace.
Since this entails pretty much a rewrite, convert away from
old_mmio in the process.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-8-git-send-email-peter.maydell@linaro.org
Make the ARMv7M object take a memory region link which it uses
to wire up the bitband rather than having them always put
themselves in the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-6-git-send-email-peter.maydell@linaro.org
Create a proper QOM object for the armv7m container, which
holds the CPU, the NVIC and the bitband regions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-4-git-send-email-peter.maydell@linaro.org
Move the NVICState struct definition into a header, so we can
embed it into other QOM objects like SoCs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-3-git-send-email-peter.maydell@linaro.org
Abstract the "load kernel" code out of armv7m_init() into its own
function. This includes the registration of the CPU reset function,
to parallel how we handle this for A profile cores.
We make the function public so that boards which choose to
directly instantiate an ARMv7M device object can call it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-2-git-send-email-peter.maydell@linaro.org
This adds the BCM2835 SDHost controller from Arasan.
Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr>
Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 2.9 ITS will block save/restore and migration use cases. As such,
let's introduce a user option that allows to turn its instantiation
off, along with GICv3. With the "its" option turned false, migration
will be possible, obviously at the expense of MSI support (with GICv3).
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1487681108-14452-1-git-send-email-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Recent vanilla Raspberry Pi kernels started to make use of
the hardware random number generator in BCM2835 SoC. As a
result, those kernels wouldn't work anymore under QEMU
but rather just freeze during the boot process.
This patch implements a trivial BCM2835 compatible RNG,
and adds it as a peripheral to BCM2835 platform, which
allows to boot a vanilla Raspberry Pi kernel under Qemu.
Changes since v1:
* Prevented guest from writing [31..20] bits in rng_status
* Removed redundant minimum_version_id_old
* Added field entries for the state
* Changed realize function to reset
Signed-off-by: Marcin Chojnacki <marcinch7@gmail.com>
Message-id: 20170210210857.47893-1-marcinch7@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Helper function (and DisplayChangeListenerOps ptr) to disable scanouts.
Replaces using dpy_gl_scanout_texture with 0x0 size and no texture
specified.
Allows cleanups to make the io and gfx emulation code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-3-git-send-email-kraxel@redhat.com
We'll add a variant which accepts dmabufs soon. Change
the name so we can easily disturgish the two variants.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487669841-13668-2-git-send-email-kraxel@redhat.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYgF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 24 Feb 2017 18:08:26 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
tests: Use opened block node for block job tests
vvfat: Use opened node as backing file
block: Add bdrv_new_open_driver()
block: Factor out bdrv_open_driver()
block: Use BlockBackend for image probing
block: Factor out bdrv_open_child_bs()
block: Attach bs->file only during .bdrv_open()
block: Pass BdrvChild to bdrv_truncate()
mirror: Resize active commit base in mirror_run()
qcow2: Use BB for resizing in qcow2_amend_options()
blockdev: Use BlockBackend to resize in qmp_block_resize()
iotests: Fix another race in 030
qemu-img: Improve documentation for PREALLOC_MODE_FALLOC
qemu-img: Truncate before full preallocation
qemu-img: Add tests for raw image preallocation
qemu-img: Do not truncate before preallocation
qemu-iotests: redirect nbd server stdout to /dev/null
qemu-iotests: add ability to exclude certain protocols from tests
qemu-iotests: Test 137 only supports 'file' protocol
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uM3N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170224' into staging
A selection of s390x patches:
- cleanups, fixes and improvements
- program check loop detection (useful with the corresponding kernel
patch)
- wire up virtio-crypto for ccw
- and finally support many virtqueues for virtio-ccw
# gpg: Signature made Fri 24 Feb 2017 09:19:19 GMT
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170224:
s390x/css: handle format-0 TIC CCW correctly
s390x/arch_dump: pass cpuid into notes sections
s390x/arch_dump: use proper note name and note size
virtio-ccw: support VIRTIO_QUEUE_MAX virtqueues
s390x: bump ADAPTER_ROUTES_MAX_GSI
virtio-ccw: check flic->adapter_routes_max_batch
s390x: add property adapter_routes_max_batch
virtio-ccw: Check the number of vqs in CCW_CMD_SET_IND
virtio-ccw: add virtio-crypto-ccw device
virtio-ccw: handle virtio 1 only devices
s390x/flic: fail migration on source already
s390x/kvm: detect some program check loops
s390x/s390-virtio: get rid of DPRINTF
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=o8eA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-util-2017-02-23' into staging
option cutils: Fix and clean up number conversions
# gpg: Signature made Thu 23 Feb 2017 19:41:17 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-util-2017-02-23: (24 commits)
option: Fix checking of sizes for overflow and trailing crap
util/cutils: Change qemu_strtosz*() from int64_t to uint64_t
util/cutils: Return qemu_strtosz*() error and value separately
util/cutils: Let qemu_strtosz*() optionally reject trailing crap
qemu-img: Wrap cvtnum() around qemu_strtosz()
test-cutils: Drop suffix from test_qemu_strtosz_simple()
test-cutils: Use qemu_strtosz() more often
util/cutils: Drop QEMU_STRTOSZ_DEFSUFFIX_* macros
util/cutils: New qemu_strtosz()
util/cutils: Rename qemu_strtosz() to qemu_strtosz_MiB()
util/cutils: New qemu_strtosz_metric()
test-cutils: Cover qemu_strtosz() around range limits
test-cutils: Cover qemu_strtosz() with trailing crap
test-cutils: Cover qemu_strtosz() invalid input
test-cutils: Add missing qemu_strtosz()... endptr checks
option: Fix to reject invalid and overflowing numbers
util/cutils: Clean up control flow around qemu_strtol() a bit
util/cutils: Clean up variable names around qemu_strtol()
util/cutils: Rename qemu_strtoll(), qemu_strtoull()
util/cutils: Rewrite documentation of qemu_strtol() & friends
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function allows to create more or less normal BlockDriverStates
even for BlockDrivers that aren't globally registered (e.g. helper
filters for block jobs).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This introduces support to the cputlb API for flushing all CPUs TLBs
with one call. This avoids the need for target helpers to iterate
through the vCPUs themselves.
An additional variant of the API (_synced) will cause the source vCPUs
work to be scheduled as "safe work". The result will be all the flush
operations will be complete by the time the originating vCPU executes
its safe work. The calling implementation can either end the TB
straight away (which will then pick up the cpu->exit_request on
entering the next block) or defer the exit until the architectural
sync point (usually a barrier instruction).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The main use case for tlb_reset_dirty is to set the TLB_NOTDIRTY flags
in TLB entries to force the slow-path on writes. This is used to mark
page ranges containing code which has been translated so it can be
invalidated if written to. To do this safely we need to ensure the TLB
entries in question for all vCPUs are updated before we attempt to run
the code otherwise a race could be introduced.
To achieve this we atomically set the flag in tlb_reset_dirty_range and
take care when setting it when the TLB entry is filled.
On 32 bit systems attempting to emulate 64 bit guests we don't even
bother as we might not have the atomic primitives available. MTTCG is
disabled in this case and can't be forced on. The copy_tlb_helper
function helps keep the atomic semantics in one place to avoid
confusion.
The dirty helper function is made static as it isn't used outside of
cputlb.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This converts the remaining TLB flush routines to use async work when
detecting a cross-vCPU flush. The only minor complication is having to
serialise the var_list of MMU indexes into a form that can be punted
to an asynchronous job.
The pending_tlb_flush field on QOM's CPU structure also becomes a
bitfield rather than a boolean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.
For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:
tlb_flush_page_by_mmuidx(other_cs, pageaddr,
(1 << ARMMMUIdx_S1SE1) |
(1 << ARMMMUIdx_S1SE0));
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some architectures allow to flush the tlb of other VCPUs. This is not a problem
when we have only one thread for all VCPUs but it definitely needs to be an
asynchronous work when we are in true multithreaded work.
We take the tb_lock() when doing this to avoid racing with other threads
which may be invalidating TB's at the same time. The alternative would
be to use proper atomic primitives to clear the tlb entries en-mass.
This patch doesn't do anything to protect other cputlb function being
called in MTTCG mode making cross vCPU changes.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: remove need for g_malloc on defer, make check fixes, tb_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along. As an cpu->exit_request may legitimately get squashed
while processing the EXCP_INTERRUPT exception we also check
cpu->queued_work_first to ensure queued work is expedited as soon as
possible.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This finally allows TCG to benefit from the iothread introduction: Drop
the global mutex while running pure TCG CPU code. Reacquire the lock
when entering MMIO or PIO emulation, or when leaving the TCG loop.
We have to revert a few optimization for the current TCG threading
model, namely kicking the TCG thread in qemu_mutex_lock_iothread and not
kicking it in qemu_cpu_kick. We also need to disable RAM block
reordering until we have a more efficient locking mechanism at hand.
Still, a Linux x86 UP guest and my Musicpal ARM model boot fine here.
These numbers demonstrate where we gain something:
20338 jan 20 0 331m 75m 6904 R 99 0.9 0:50.95 qemu-system-arm
20337 jan 20 0 331m 75m 6904 S 20 0.9 0:26.50 qemu-system-arm
The guest CPU was fully loaded, but the iothread could still run mostly
independent on a second core. Without the patch we don't get beyond
32206 jan 20 0 330m 73m 7036 R 82 0.9 1:06.00 qemu-system-arm
32204 jan 20 0 330m 73m 7036 S 21 0.9 0:17.03 qemu-system-arm
We don't benefit significantly, though, when the guest is not fully
loading a host CPU.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <1439220437-23957-10-git-send-email-fred.konrad@greensocs.com>
[FK: Rebase, fix qemu_devices_reset deadlock, rm address_space_* mutex]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[EGC: fixed iothread lock for cpu-exec IRQ handling]
Signed-off-by: Emilio G. Cota <cota@braap.org>
[AJB: -smp single-threaded fix, clean commit msg, BQL fixes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[PM: target-arm changes]
Acked-by: Peter Maydell <peter.maydell@linaro.org>
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bsJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.9-20170222' into staging
ppc patch queue for 2017-02-22
This pull request has:
* Yet more POWER9 instruction implementations
* Some extensions to the softfloat code which are necesssary for
some of those instructions
* Some preliminary patches in preparation for POWER9 softmmu
implementation
* Igor Mammedov's cleanups to unify hotplug cpu handling across
architectures
* Assorted bugfixes
The softfloat and cpu hotplug changes aren't entirely ppc specific (in
fact the hotplug stuff contains some pc specific patches). However
they're included here because ppc is one of the main beneficiaries,
and the series depend on some ppc specific patches.
# gpg: Signature made Wed 22 Feb 2017 06:29:47 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.9-20170222: (43 commits)
hw/ppc/ppc405_uc.c: Avoid integer overflows
hw/ppc/spapr: Check for valid page size when hot plugging memory
target-ppc: fix Book-E TLB matching
hw/net/spapr_llan: 6 byte mac address device tree entry
machine: replace query_hotpluggable_cpus() callback with has_hotpluggable_cpus flag
machine: unify [pc_|spapr_]query_hotpluggable_cpus() callbacks
spapr: reuse machine->possible_cpus instead of cores[]
change CPUArchId.cpu type to Object*
pc: pass apic_id to pc_find_cpu_slot() directly so lookup could be done without CPU object
pc: calculate topology only once when possible_cpus is initialised
pc: move pcms->possible_cpus init out of pc_cpus_init()
machine: move possible_cpus to MachineState
hw/pci-host/prep: Do not use hw_error() in realize function
target/ppc/POWER9: Direct all instr and data storage interrupts to the hypv
target/ppc/POWER9: Adapt LPCR handling for POWER9
target/ppc/POWER9: Add ISAv3.00 MMU definition
target/ppc: Fix LPCR DPFD mask define
target-ppc: Add xscvqpudz and xscvqpuwz instructions
target-ppc: Implement round to odd variants of quad FP instructions
softfloat: Add float128_to_uint32_round_to_zero()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The maximal number of virtqueues per device can be limited on a per
transport basis. For virtio-ccw this limit is defined by
VIRTIO_CCW_QUEUE_MAX, however the limitation used to come form the
number of adapter routes supported by flic (via notifiers).
Recently the limitation of the flic was adjusted so that it can
accommodate VIRTIO_QUEUE_MAX queues, and is in the meanwhile checked for
separately too.
Let us remove the transport specific limitation of virtio-ccw by
dropping VIRTIO_CCW_QUEUE_MAX and using VIRTIO_QUEUE_MAX instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's increase ADAPTER_ROUTES_MAX_GSI to VIRTIO_QUEUE_MAX which is the
largest demand foreseeable at the moment. Let us add a compatibility
macro for the previous machines so client code can maintain backwards
migration compatibility
To not mess up migration compatibility for virtio-ccw
VIRTIO_CCW_QUEUE_MAX is left at it's current value, and will be dropped
when virtio-ccw is converted to use the capability of the flic
introduced by this patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
To make virtio-ccw supports more that 64 virtqueues we will have to
increase ADAPTER_ROUTES_MAX_GSI which is currently limiting the number if
possible adapter routes. Of course increasing the number of supported
routes can break backwards migration.
Let us introduce a compatibility property adapter_routes_max_batch so
client code can use the some old limit if in compatibility mode and
retain the migration compatibility.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This will permit its use in parse_option_size().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-24-git-send-email-armbru@redhat.com>
This makes qemu_strtosz(), qemu_strtosz_mebi() and
qemu_strtosz_metric() similar to qemu_strtoi64(), except negative
values are rejected.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-23-git-send-email-armbru@redhat.com>
Most callers of qemu_strtosz_suffix() pass QEMU_STRTOSZ_DEFSUFFIX_B.
Capture the pattern in new qemu_strtosz().
Inline qemu_strtosz_suffix() into its only remaining caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-17-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
To parse numbers with metric suffixes, we use
qemu_strtosz_suffix_unit(nptr, &eptr, QEMU_STRTOSZ_DEFSUFFIX_B, 1000)
Capture this in a new function for legibility:
qemu_strtosz_metric(nptr, &eptr)
Replace test_qemu_strtosz_suffix_unit() by test_qemu_strtosz_metric().
Rename qemu_strtosz_suffix_unit() to do_strtosz() and give it internal
linkage.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-15-git-send-email-armbru@redhat.com>
The name qemu_strtoll() suggests conversion to long long, but it
actually converts to int64_t. Rename to qemu_strtoi64().
The name qemu_strtoull() suggests conversion to unsigned long long,
but it actually converts to uint64_t. Rename to qemu_strtou64().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1487708048-2131-7-git-send-email-armbru@redhat.com>
Curiously, unrealize() is not being used, but it seems more
appropriate than handle_destroy() together with realize(). It is more
ubiquitous destroy name in qemu code base and may throw errors.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20170221141451.28305-25-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace SPAPR specific cores[] array with generic
machine->possible_cpus and store core objects there.
It makes cores bookkeeping similar to x86 cpus and
will allow to unify similar code.
It would allow to replace cpu_index based NUMA node
mapping with iproperty based one (for -device created
cores) since possible_cpus carries board defined
topology/layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
float128_to_uint32_round_to_zero() is needed by xscvqpuwz instruction
of PowerPC ISA 3.0.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Implement float128_to_uint64() and use that to implement
float128_to_uint64_round_to_zero()
This is required by xscvqpudz instruction of PowerPC ISA 3.0.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Paolo Bonzini
Peter Maydell
Clement Deschamps
Eric Auger
Marcin Chojnacki
Gerd Hoffmann
Kevin Wolf
Alex Bennée
KONRAD Frederic
Jan Kiszka
Halil Pasic
Markus Armbruster
Marc-André Lureau
Igor Mammedov
Bharata B Rao