Since all temps allocated by guest front-ends are now TEMP_TB,
and we don't recycle TEMP_TB, there's no point in requiring
that the front-ends free the temps at all. Begin by dropping
the inner-most checks that all temps have been freed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the first label and redirect all uses to the second.
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to easily find all branches that use a label.
Since 'refs' is only tested vs zero, remove it and test for
an empty list instead. Drop the use of bitfields, which had
been used to pack refs into a single 32-bit word.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When CONFIG_PROFILER is set there are various undefined references to
profile_getclock. Include the header which defines this function.
For example:
../tcg/tcg.c: In function ‘tcg_gen_code’:
../tcg/tcg.c:4905:51: warning: implicit declaration of function ‘profile_getclock’ [-Wimplicit-function-declaration]
4905 | qatomic_set(&prof->opt_time, prof->opt_time - profile_getclock());
| ^~~~~~~~~~~~~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230303084948.3351546-1-rjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reusing TEMP_TB interferes with detecting whether the
temp can be adjusted to TEMP_EBB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All of these have obvious and quite local scope.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While the argument can only be TEMP_EBB or TEMP_TB,
it's more obvious this way.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TEMP_NORMAL is a subset of TEMP_EBB. Promote single basic
block temps to single extended basic block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Attempt to reduce the lifetime of TEMP_TB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This makes it easier to assign blame with perf.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use TEMP_TB as that is more explicit about the default
lifetime of the data. While "global" and "local" used
to be contrasting, we have more lifetimes than that now.
Do not yet rename tcg_temp_local_new_*, just the enum.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just because the label reference count is more than 1 does
not mean we cannot remove a branch-to-next. By doing this
first, the label reference count may drop to 0, and then
the label itself gets removed as before.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change the temps_in_use check to use assert not fprintf.
Move the assert for double-free before the check for count,
since that is the more immediate problem.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221219170806.60580-2-philmd@linaro.org>
This enables allocation of i128. The type is not yet
usable, as we have not yet added data movement ops.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for the host ABI for Int128 for
those backends which require no extra modification.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the parameters for libffi for Int128.
Adjust the interpreter to allow for 16-byte return values.
Adjust tcg_out_call to record the return value length.
Call parameters are no longer all the same size, so we
cannot reuse the same call_slots array for every function.
Compute it each time now, but only fill in slots required
for the call we're about to make.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be used by _WIN64 to return i128. Not yet used,
because allocation is not yet enabled.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the flat array tcg_target_call_oarg_regs[] with
a function call including the TCGCallReturnKind.
Extend the set of registers for ARM to r0-r3 to match the ABI:
https://github.com/ARM-software/abi-aa/blob/main/aapcs32/aapcs32.rst#result-return
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These will be used by some hosts, both 32 and 64-bit, to pass and
return i128. Not yet used, because allocation is not yet enabled.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the function for arm, i386, and s390x, which will use it.
Add stubs for all other backends.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When allocating a temp to the stack frame, consider the
base type and allocate all parts at once.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Many hosts pass and return 128-bit quantities like sequential
64-bit quantities. Treat this just like we currently break
down 64-bit quantities for a 32-bit host.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Correctly handle large types while lowering.
Fixes: fac87bd2a4 ("tcg: Add temp_subindex to TCGTemp")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are actually a whole bunch of helpers that don't affect memory
that we shouldn't instrument. They are helpfully identified by the
TCG_CALL_NO_SIDE_EFFECTS flag which marks out lookup_tb_ptr as well as
a lot of the maths helpers. To avoid the string compare we introduce a
new flag for plugin internals so we skip that too.
Related: #1381
Signed-off-by: Emilio Cota <cota@braap.org>
Message-Id: <20230108164731.61469-4-cota@braap.org>
[AJB: updated to skip all no SE plugins, add flag for plugin helper]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-34-alex.bennee@linaro.org>
We now have the option to generate direct or indirect
goto_tb depending on the dynamic displacement, thus
the define is no longer necessary or completely accurate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stop overloading jmp_target_arg for both offset and address,
depending on TCG_TARGET_HAS_direct_jump. Instead, add a new
field to hold the jump insn offset and always set the target
address in jmp_target_addr[]. This will allow a tcg backend
to use either direct or indirect depending on displacement.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This can replace four other variables that are references
into the TranslationBlock structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will shortly be used for more than reset.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_goto_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Include the
rw->rx address space conversion done by arm and s390x, and
forgotten by mips and riscv.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the existing set_jmp_reset_offset. Move any assert for
TCG_TARGET_HAS_direct_jump into the new function (which now cannot
be build-time). Will be unused if TCG_TARGET_HAS_direct_jump is
constant 0, but we can't test for constant in the preprocessor,
so just mark it G_GNUC_UNUSED.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The INDEX_op_exit_tb opcode needs no register allocation.
Split out a dedicated helper function for it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump.
The first one allows the perf tool to map samples to each individual
translation block. The second one adds the ability to resolve symbol
names, line numbers and inspect JITed code.
Example of use:
perf record qemu-x86_64 -perfmap ./a.out
perf report
or
perf record -k 1 qemu-x86_64 -jitdump ./a.out
DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted
perf report -i perf.data.jitted
Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com>
Co-developed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230112152013.125680-4-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of requiring a separate hash table lookup,
put a pointer to the CIF into TCGHelperInfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-4-philmd@linaro.org>
In the unlikely case of invalid typecode mask, the function
will abort instead of returning a NULL pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-2-philmd@linaro.org>
Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array. This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.
For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.
For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot). Avoid
direct references to op->output_pref[] when possible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit. With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper function for computing the size of a type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate the first of a pair at the lower address, and the
second of a pair at the higher address. This will make it
easier to find the beginning of the larger memory block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first thing that temp_sync does is check mem_coherent,
so there's no need for the caller to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson
Richard W.M. Jones
Philippe Mathieu-Daudé
Emilio Cota
Ilya Leoshkevich