This patch starts adding trace support to ehci. It traces
updates of the status register (USBSTS), mmio access and
controller reset.
It also adds functions to set and clear status register bits
and puts them in use everywhere.
Some DPRINTF's are dropped in favor of the new tracepoints.
No change in behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The simple backend only supports a maximum of 6 arguments. Split the
scsi_req_parsed event in two parts to cope with the limit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
One strategy to limit the startup delay of consistency check when
opening image files is to ensure that the file is marked dirty for as
little time as possible.
QED currently marks the image dirty when the first allocating write
request is issued and clears the dirty bit again when the image is
cleanly closed. In practice that means the image is marked dirty for
most of a guest's lifetime and prone to being in a dirty state upon
crash or power failure.
It is safe to clear the dirty bit after all allocating write requests
have completed and a flush has been performed. This patch adds a timer
after the last allocating write request completes. When the timer fires
it will flush and then clear the dirty bit. The timer is set to 5
seconds and is cancelled upon arrival of a new allocating write request.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds support for Milkymist's minimal Ethernet MAC v2. It
superseds minimac1.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all). Recording
const char * values is not meaningful if their contents are not recorded
too.
Change grlib trace events that rely on strings so that they communicate
similar information without using strings.
A follow-up patch explains this limitation and updates docs/tracing.txt.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's simple UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's System Controller core. The model
has the following features:
- support for shutting down and restarting the board
- provide two timers and GPIO
- provide registers for system identification and reading the boards
capabilities
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's memory card core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds paio_complete() and paio_cancel() trace events to
complement the paio_submit() event.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add a trace event for bdrv_aio_flush() to complement the existing
bdrv_aio_readv() and bdrv_aio_writev() events.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch add support for a system control block. It is supposed to
act as helper for the emulated program. E.g. shutting down the VM or
printing test results. This model is intended for testing purposes only and
doesn't fit to any real hardware. Therefore, it is not added to any board
by default. Instead a user has to add it explicitly with the '-device'
commandline parameter.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch add support for the LatticeMico32 UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the LatticeMico32 system timer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the JTAG UART model. It is accessed through special control
registers and opcodes. Therefore the translation uses callbacks to this
model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds the interrupt controller of the lm32. Because the PIC is
accessed through special control registers and opcodes, there are callbacks
from the lm32 translation code to this model.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).
Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes one parameter:
- chardev (ptr) : Pointer to a qemu character device
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes two parameters:
- set_pil_in (ptr) : A function to set the pil_in of the SPARC CPU
- set_pil_in_opaque (ptr) : Opaque argument of the set_pil_in function
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This device exposes three parameters:
- frequency (uint32) : The system frequency
- irq-line (uint32) : IRQ line number for the first timer
(others use irq-line + 1, irq-line + 2...)
- nr-timers (uint32) : Number of timers
Emulation of GrLib devices is base on the GRLIB IP Core User's Manual:
http://www.gaisler.com/products/grlib/grip.pdf
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for device_qualifier and other_speed_config descriptors.
These are used to query the "other speed" configuration of usb 2.0
devices, i.e. in high-speed mode they return the full-speed
configuration and visa versa.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds hw/usb-desc.[ch] files. They carry data structures
for various usb descriptors and helper functions to generate usb
packets from the structures.
The intention is to have a internal representation of the device
desription which is more usable than the current char array blobs,
so we can have common code handle common usb device emulation using
the device description.
The usage of this infrastructure is optional for usb drivers as there
are cases such as pass-through where it probably isn't very useful.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch implements the read/write state machine. Operations are
fully asynchronous and multiple operations may be active at any time.
Allocating writes lock tables to ensure metadata updates do not
interfere with each other. If two allocating writes need to update the
same L2 table they will run sequentially. If two allocating writes need
to update different L2 tables they will run in parallel.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds code to look up data cluster offsets in the image via
the L1/L2 tables. The L2 tables are writethrough cached in memory for
performance (each read/write requires a lookup so it is essential to
cache the tables).
With cluster lookup code in place it is possible to implement
bdrv_is_allocated() to query the number of contiguous
allocated/unallocated clusters.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VM state change notifications are invoked from vm_start()/vm_stop().
Trace these state changes so we can reason about the state of the VM
from trace output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace debug printf statements with tracepoints.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Observing block layer aio readv/writev operations is useful for
debugging image formats or understanding guest disk I/O patterns.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It is not portable to use "%ld" for int64_t because int64_t may have
type long on 64-bit platforms and long long on 32-bit platforms. Use
the standard library PRId64 macros to keep format strings portable.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
