The `make efi` target added by 536d2173 is built from the roms/edk2
submodule, which in turn relies on additional submodules nested under
roms/edk2.
The make-release script currently only pulls in top-level submodules,
so these nested submodules are missing in the resulting tarball.
We could try to address this situation more generally by recursively
pulling in all submodules, but this doesn't necessarily ensure the
end-result will build properly (this case also required other changes).
Additionally, due to the nature of submodules, we may not always have
control over how these sorts of things are dealt with, so for now we
continue to handle it on a case-by-case in the make-release script.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org # v4.1.0
Reported-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190912231202.12327-2-mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When I run QEMU with KVM under Valgrind, I currently get this warning:
Syscall param ioctl(generic) points to uninitialised byte(s)
at 0x95BA45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x429DC3: kvm_ioctl (kvm-all.c:2365)
by 0x51B249: kvm_arch_get_supported_msr_feature (kvm.c:469)
by 0x4C2A49: x86_cpu_get_supported_feature_word (cpu.c:3765)
by 0x4C4116: x86_cpu_expand_features (cpu.c:5065)
by 0x4C7F8D: x86_cpu_realizefn (cpu.c:5242)
by 0x5961F3: device_set_realized (qdev.c:835)
by 0x7038F6: property_set_bool (object.c:2080)
by 0x707EFE: object_property_set_qobject (qom-qobject.c:26)
by 0x705814: object_property_set_bool (object.c:1338)
by 0x498435: pc_new_cpu (pc.c:1549)
by 0x49C67D: pc_cpus_init (pc.c:1681)
Address 0x1ffeffee74 is on thread 1's stack
in frame #2, created by kvm_arch_get_supported_msr_feature (kvm.c:445)
It's harmless, but a little bit annoying, so silence it by properly
initializing the whole structure with zeroes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some secondary controls are automatically enabled/disabled based on the CPUID
values that are set for the guest. However, they are still available at a
global level and therefore should be present when KVM_GET_MSRS is sent to
/dev/kvm.
Unfortunately KVM forgot to include those, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add code to convert the VMX feature words back into MSR values,
allowing the user to enable/disable VMX features as they wish. The same
infrastructure enables support for limiting VMX features in named
CPU models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The low bits are 1 if the control must be one, the high bits
are 1 if the control can be one. Correct the variable names
as they are very confusing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These will be used to compile the list of VMX features for named
CPU models, and/or by the code that sets up the VMX MSRs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX requires 64-bit feature words for the IA32_VMX_EPT_VPID_CAP
and IA32_VMX_BASIC MSRs. (The VMX control MSRs are 64-bit wide but
actually have only 32 bits of information).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes a CPU feature does not make sense unless another is
present. In the case of VMX features, KVM does not even allow
setting the VMX controls to some invalid combinations.
Therefore, this patch adds a generic mechanism that looks for bits
that the user explicitly cleared, and uses them to remove other bits
from the expanded CPU definition. If these dependent bits were also
explicitly *set* by the user, this will be a warning for "-cpu check"
and an error for "-cpu enforce". If not, then the dependent bits are
cleared silently, for convenience.
With VMX features, this will be used so that for example
"-cpu host,-rdrand" will also hide support for RDRAND exiting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The next patch will add a different reason for filtering features, unrelated
to host feature support. Extract a new function that takes care of disabling
the features and optionally reporting them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-fsanitize=undefined is not the same thing as --enable-sanitizers. After
commit 47c823e ("tests/docker: add sanitizers back to clang build", 2019-09-11)
test-clang is almost duplicating the asan (test-debug) test, so
partly revert commit 47c823e5b while leaving ubsan enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 05e514b1d4 introduced an AIO
context optimization to avoid calling event_notifier_test_and_clear() on
ctx->notifier. On Windows, the same notifier is being used to wakeup the
wait on socket events (see commit
d3385eb448).
The ctx->notifier event is added to the gpoll sources in
aio_set_event_notifier(), aio_ctx_check() should clear the event
regardless of ctx->notified, since Windows sets the event by itself,
bypassing the aio->notified. This fixes qemu not clearing the event
resulting in a busy loop.
Paolo suggested to me on irc to call event_notifier_test_and_clear()
after select() >0 from aio-win32.c's aio_prepare. Unfortunately, not all
fds associated with ctx->notifiers are in AIO fd handlers set.
(qemu_set_nonblock() in util/oslib-win32.c calls qemu_fd_register()).
This is essentially a v2 of a patch that was sent earlier:
https://lists.gnu.org/archive/html/qemu-devel/2017-01/msg00420.html
that resurfaced when James investigated Spice performance issues on Windows:
https://gitlab.freedesktop.org/spice/spice/issues/36
In order to test that patch, I simply tried running test-char on
win32, and it hangs. Applying that patch solves it. QIO idle sources
are not dispatched. I haven't investigated much further, I suspect
source priorities and busy looping still come into play.
This version keeps the "notified" field, so event_notifier_poll()
should still work as expected.
Cc: James Le Cuirot <chewi@gentoo.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Serial test is currently hard-coded to /dev/null.
On Windows, serial chardev expect a COM: device, which may not be
availble.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In general, WSAEWOULDBLOCK can be mapped to EAGAIN as done by
socket_error() (or EWOULDBLOCK). But for connect() with non-blocking
sockets, it actually means the operation is in progress:
https://docs.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-connect
"The socket is marked as nonblocking and the connection cannot be completed immediately."
(this is also the behaviour implemented by GLib GSocket)
This fixes socket_can_bind_connect() test on win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a problem, that you don't have access to the data using cpu_memory_rw_debug() function when in SMM. You can't remotely debug SMM mode program because of that for example.
Likely attrs version of get_phys_page_debug should be used to get correct asidx at the end to handle access properly.
Here the patch to fix it.
Signed-off-by: Dmitry Poletaev <poletaev@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The container error integer field is currently used to store
the first error potentially encountered during any
vfio_listener_region_add() call. However this fails to propagate
detailed error messages up to the vfio_connect_container caller.
Instead of using an integer, let's use an Error handle.
Messages are slightly reworded to accomodate the propagation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CPUID bits CLZERO and XSAVEERPTR are availble on AMD's ZEN platform
and could be passed to the guest.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are just too many leaks in device-introspect-test (especially for
the plethora of arm and aarch64 boards) to make LeakSanitizer useful;
disable it for now.
Whoever is interested in debugging leaks can also use valgrind like this:
QTEST_QEMU_BINARY=aarch64-softmmu/qemu-system-aarch64 \
QTEST_QEMU_IMG=qemu-img \
valgrind --trace-children=yes --leak-check=full \
tests/device-introspect-test -p /aarch64/device/introspect/concrete/defaults/none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bottom halves and ptimers are malloced, but nothing in these
files is freeing memory allocated by instance_init. Since
these are sysctl devices that are never unrealized, just moving
the allocations to realize is enough to avoid the leak in
practice (and also to avoid upsetting asan when running
device-introspect-test).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
memory_region_init_* takes care of copying the name into memory it owns.
Free it in the caller.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The array returned by qemu_allocate_irqs is malloced, free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The device tree blob returned by load_device_tree is malloced.
Free it before returning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The array returned by qemu_allocate_irqs is malloced, free it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Currently, isa-superio.c is always compiled as soon as CONFIG_ISA_BUS
is enabled. But there are also machines that have an ISA BUS without
any of the superio chips attached to it, so we should not compile
isa-superio.c in case we only compile a QEMU for such a machine.
Thus add a proper CONFIG_ISA_SUPERIO switch so that this file only gets
compiled when we really, really need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9458a9a1df added synchronization
of vCPU and migration operations through calling run_on_cpu operation.
However, in replay mode this synchronization is unneeded, because
I/O and vCPU threads are already synchronized.
This patch disables such synchronization for record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
The 'r' variable was accidently shadowed, and because of this
we were always passing 0 to mpath_generic_sense, instead of original
return value, which triggers an abort()
This is an attempt to fix the
https://bugzilla.redhat.com/show_bug.cgi?id=1720047
although there might be other places in the code
that trigger qemu-pr-helper crash, and this fix might
not be the root cause.
The crash was reproduced by creating an iscsi target on a test machine,
and passing it twice to the guest like that:
-blockdev node-name=idisk0,driver=iscsi,transport=...,target=...
-device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=0,share-rw=on
-device scsi-block,drive=idisk0,bus=scsi0.0,bootindex=-1,scsi-id=1,lun=1,share-rw=on
Then in the guest, both /dev/sda and /dev/sdb were aggregated by multipath to /dev/mpatha,
which was passed to a nested guest like that
-object pr-manager-helper,id=qemu_pr_helper,path=/root/work/vm/testvm/.run/pr_helper.socket
-blockdev node-name=test,driver=host_device,filename=/dev/mapper/mpatha,pr-manager=qemu_pr_helper
-device scsi-block,drive=test,bus=scsi0.0,bootindex=-1,scsi-id=0,lun=0
The nested guest run:
sg_persist --no-inquiry -v --out --register --param-sark 0x1234 /dev/sda
Strictly speaking this is wrong configuration since qemu is where
the multipath was split, and thus the iscsi target was not aware of
multipath, and thus when libmpathpersist code rightfully tried to register
the PR key on all paths, it failed to do so.
However qemu-pr-helper should not crash in this case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190909131335.16848-4-yury-kotov@yandex-team.ru>
[Reorganize check_migration_status for rebase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the cross compilers rightly complain there are cases where ret
may not be set. 0 seems to be the reasonable default unless particular
slot explicitly returns -1.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-7-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-5-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-4-git-send-email-aleksandar.markovic@rt-rk.com>
Mostly fix errors and warnings reported by 'checkpatch.pl -f'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1569331602-2586-3-git-send-email-aleksandar.markovic@rt-rk.com>
