Commit Graph

270 Commits

Author SHA1 Message Date
Jean-Christophe DUBOIS ec46eaa83a i.MX: Add i.MX6 SOC implementation.
For now we only support the following devices:
* up to 4 Cortex A9 cores
* A9 MPCORE (SCU, GIC, TWD)
* 5 i.MX UARTs
* 2 EPIT timers
* 1 GPT timer
* 3 I2C controllers
* 7 GPIO controllers
* 6 SDHC controllers
* 5 SPI controllers
* 1 CCM device
* 1 SRC device
* various ROM/RAM areas.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12 13:22:29 +01:00
Shannon Zhao e5a8152c9b hw/gpio: Add the emulation of gpio_key
This will be used by ARM virt machine as a power button.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com
[PMM: Use hyphen rather than underscore in type names;
 add a comment briefly describing what the device does]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30 17:27:22 +01:00
Leon Alrae 34fa7e83e1 hw/mips: implement ITC Configuration Tags and Storage Cells
Implement ITC as a single object consisting of two memory regions:

1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which
are accessible by the CPU via CACHE instruction. Also adding
MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will
dispatch reads/writes directly.

2) storage_io: memory-mapped ITC Storage whose address space is configurable
(i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers.

ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the
ITC cell tag indicates the type of the cell. If the ITC Storage contains
both types of cells then FIFOs are located before Semaphores.

Since issuing thread can get blocked on the access to a cell (in E/F
Synchronized and P/V Synchronized Views) each cell has a bitmap to track
which threads are currently blocked.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae 8e7e8a5b7b hw/mips: implement generic MIPS Coherent Processing System container
Implement generic MIPS Coherent Processing System (CPS) which in this
commit just creates VPs, but it will serve as a container also for
other components like Global Configuration Registers and Cluster Power
Controller.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:58 +01:00
Peter Maydell 1080534481 MIPS patches 2016-03-23
Changes:
 * add mips-softmmu-common.mak
 * indicate presence of IEEE 754-2008 FPU in MIPS64R6-generic and P5600
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJW8sZsAAoJEFIRjjwLKdprgxgH/inaVaVFN8IYorKIaZz9igYB
 K8arQIy0LOKxxJESVIdCIVM19v6RfPjouDo0RsNpmroIHwV6A+47JU9ZKsVMxrt3
 KBO5Um75MC1IagMAUdn91omyh8ZDdsEA6dC6g60PB6remNbEh5LHd2aH2hsNMY2E
 o/VDQt3b/luw6N7B7TYMgQ6MmT3FT681FEm4NS7rl1Lfh5dj5JQHiakOEsVpSzI1
 2bNjBmrhh34ORokrQer0aBMsLPC4SH1Fjhzlltk4NwfKyEoPi07zG91L/RevIBqU
 9A1sNnWK5hDRhHet+yE50iLSfkPe7aRPSrXZOqVtqROBtCA21vdpKv0Bsnb3OFU=
 =PdHc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160323' into staging

MIPS patches 2016-03-23

Changes:
* add mips-softmmu-common.mak
* indicate presence of IEEE 754-2008 FPU in MIPS64R6-generic and P5600

# gpg: Signature made Wed 23 Mar 2016 16:38:04 GMT using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20160323:
  default-configs: add mips-softmmu-common.mak
  target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-24 14:30:20 +00:00
Leon Alrae b7c4ab809a default-configs: add mips-softmmu-common.mak
Add mips-softmmu-common.mak and include it in existing mips*-softmmu.mak
files to avoid having to repeat CONFIG defines four times.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-23 13:36:56 +00:00
Markus Armbruster 330b58368c event_notifier: Make event_notifier_init_fd() #ifdef CONFIG_EVENTFD
Event notifiers are designed for eventfd(2).  They can fall back to
pipes, but according to Paolo, event_notifier_init_fd() really
requires the real thing, and should therefore be under #ifdef
CONFIG_EVENTFD.  Do that.

Its only user is ivshmem, which is currently CONFIG_POSIX.  Narrow it
to CONFIG_EVENTFD.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1458066895-20632-6-git-send-email-armbru@redhat.com>
2016-03-21 21:28:59 +01:00
Andrew Jeffery c04bd47db6 hw/timer: Add ASPEED timer device model
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to
8 timers can independently be configured, enabled, reset and disabled.
Some hardware features are not implemented, namely clock value matching
and pulse generation, but the implementation is enough to boot the Linux
kernel configured with aspeed_defconfig.

[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16 17:42:18 +00:00
Paolo Bonzini e351b82611 hw: Add support for LSI SAS1068 (mptsas) device
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance.  Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller.  The device corresponds to the mptsas kernel driver in
Linux.

A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers.  It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.

To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well.  The configuration pages are still based mostly on
VirtualBox's, though not exactly the same.  However, the implementation
is completely different.  The contents of the pages themselves should
not be copyrightable.

Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-09 15:45:26 +01:00
Andrew Baumann 99494e696e bcm2835_mbox: add BCM2835 mailboxes
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.

Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 14:56:32 +00:00
Xiao Guangrong 87252e1b61 nvdimm acpi: build ACPI NFIT table
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)

Currently, we only support PMEM mode. Each device has 3 structures:
- SPA structure, defines the PMEM region info

- MEM DEV structure, it has the @handle which is used to associate specified
  ACPI NVDIMM  device we will introduce in later patch.
  Also we can happily ignored the memory device's interleave, the real
  nvdimm hardware access is hidden behind host

- DCR structure, it defines vendor ID used to associate specified vendor
  nvdimm driver. Since we only implement PMEM mode this time, Command
  window and Data window are not needed

The NVDIMM functionality is controlled by the parameter, 'nvdimm', which
is introduced for the machine, there is a example to enable it:
-machine pc,nvdimm -m 8G,maxmem=100G,slots=100  -object \
memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \
nvdimm,memdev=mem1,id=nv1

It is disabled on default

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Xiao Guangrong 5c42eef243 nvdimm: implement NVDIMM device abstract
Introduce "nvdimm" device which is based on pc-dimm device type

Currently, nothing is specific for nvdimm but hotplug is disabled

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:20 +02:00
Corey Minyard a9b74079cb ipmi: Add a BT low-level interface
This provides the simulation of the BT hardware interface for
IPMI.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 0719029c47 ipmi: Add an ISA KCS low-level interface
This provides the simulation of the KCS hardware interface.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 67aa56fc03 ipmi: Add an external connection simulation interface
This adds an interface for IPMI that connects to a remote
BMC over a chardev (generally a TCP socket).  The OpenIPMI
lanserv simulator describes this interface, see that for
interface details.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 8bfffbccad ipmi: Add a local BMC simulation
This provides a minimal local BMC, basically enough to comply with the
spec and provide a complete watchdog timer (including a sensor, SDR,
and event).

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Corey Minyard 23076bb34b Add a base IPMI interface
Add the basic IPMI types and infrastructure to QEMU.  Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Andrey Smetanin b67dbb7070 hw/misc: Hyper-V test device 'hyperv-testdev'
'hyperv-testdev' will be used by kvm-unit-tests
to setup Hyper-V SynIC SINT's routing and to inject
Hyper-V SynIC SINT's.

Hyper-V test device is ISA type device that creates 0x3000
IO memory region and catches write access into it. Every
write operation data decoded into ctl code and parameters
for Hyper-V test device.

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 15:24:35 +01:00
Peter Maydell f72c0a79f7 default-configs/aarch64-linux-user.mak: Remove unused define
The uses of the CONFIG_GDBSTUB_XML define were removed in commit
b77abd95a9, but the define in aarch64-linux-user.mak somehow
escaped the cull (the patchset probably crossed in the mail with
the patches adding aarch64 support). Remove the stray define.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1447690178-4560-1-git-send-email-peter.maydell@linaro.org
2015-11-24 14:12:15 +00:00
Marc-André Lureau dd054be35f config: enable ivshmem on POSIX
ivshmem doesn't actually require kvm, so enable it when POSIX is
enabled. (it is required however when ioeventfd is enabled)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2015-10-24 18:02:47 +02:00
Benjamin Herrenschmidt b798c19057 ppc/spapr: Allow VIRTIO_VGA
It works fine with the Linux driver out of the box

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-20 09:26:36 +02:00
Zhu Guihua dfeb8679db icc_bus: drop the unused files
ICC bus impl has been droped, so all icc related files are not useful
any more; delete them.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Bharata B Rao 4a1c9cf007 spapr: Initialize hotplug memory address space
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.

Modelled on i386 memory hotplug.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23 10:51:10 +10:00
Chen Gang 444e06b172 target-tilegx: Add TILE-Gx building files
Add related configuration and make files for tilegx.
The target can now build, though not run anything.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:45:32 -07:00
Gerd Hoffmann af5b83d7d5 virtio-vga: enable for i386
This one just syncs x86_64 and i386.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 12:18:37 +03:00
Jean-Christophe Dubois ee708c999d i.MX: Add SOC support for i.MX25
For now we support the following devices:
      * CPU: ARM926
      * Interrupt Controller: AVIC
      * CCM
      * UART x 5
      * EPIT x 2
      * GPT x 4
      * FEC
      * I2C x 3

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Jean-Christophe Dubois fcbd8018e6 i.MX: Add FEC Ethernet Emulator
This is based on mcf_fec.c FEC implementation for Coldfire

  * A generic PHY was added (borrowwed from LAN9118)
  * The buffer management is also modified as buffers are
    slightly different between Coldfire and i.MX

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Jean-Christophe Dubois 20d0f9cf6a i.MX: Add I2C controller emulator
The slave mode is not implemented.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Jean-Christophe Dubois 558df83db7 i.MX: Add SOC support for i.MX31
For now we support the following devices:
  * CPU: ARM1136
  * Interrupt Controller: AVIC
  * CCM
  * UART x 2
  * EPIT x 2
  * GPT

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:30 +01:00
Wei Huang c30e15658b smbios: implement smbios support for mach-virt
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.

Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-07 10:39:29 +01:00
Wei Huang 60d8f328b8 smbios: move smbios code into a common folder
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.

Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:30 +03:00
Michael S. Tsirkin 71ba2f0af3 acpi: split out ICH ACPI support
MIPS doesn't need it, and including it creates problem as we are adding
dependency on ISA LPC bridge.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07 13:11:57 +03:00
Peter Maydell 93f6d1c160 virtio-gpu: pci support bits and virtio-vga.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJVfss3AAoJEEy22O7T6HE4gw8P/Az+6M0I6RRGoavyfC+Um1sy
 hD1VVFI34eLKxAgUupuwDMxnyXuZBbV0BZvyz46GucfcpsC038WCclIAQU50coF+
 CiVlFY2pAlwp1/wS0k+MeDa5cypsCik9Jl1vaDhgNsDlRhLgztOrgTk+fe+AFVoH
 iiLb0baENGWrgMDd8ZN9hcNbJCzBBUQ7MMkuFHZkdRx829L8yuTbCoP0tNXAuQDz
 DCcAtdt6Xm4h0NUDLFSf7CnpaWzV5WgpSPkGCYaWtmJNpxNshrkm+vFRdBHvWnhN
 Vz/2E9q1aMoSbfmnj36RhGeS37g1gAO73souDJd/LRtrk5aF1aPeWN9DGEMTTYWn
 6FNIo63v86V4kcuYxNzup5+d0A+t0aqkTFHcNrKAIvtGNTDmaCIBso1HGJud3rcA
 Rujgytbr3PpxZcJFxIzXZtTlNAHE+wwzzbdS9zaQy1l//oNIXswboJBMTHbJq6Ql
 eit+MDVrILiRcd+DviRmsTQBMRs/VlW2bHHfmgw3DvgxreyTGbR8qZKKzvGuF8Dn
 b6ODQ7Y12uUZJaytiB2SyiPNx/u7Axg1IP1w+9TVrtNONx1VSKn2aGpILYqmH1CG
 zTdgTTlWtYwLEs/tZxKHxeVZK6wlzKkc+jT259Ah57bJchzndoKCrnQ80GirdZfL
 bnMgCL2ju6Xv3A3Yn3wY
 =jnEv
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150615-1' into staging

virtio-gpu: pci support bits and virtio-vga.

# gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-vga-20150615-1:
  virtio-vga: add vgabios configuration
  virtio-vga: add '-vga virtio' support
  virtio-vga: add virtio gpu device with vga compatibility
  virtio-gpu-pci: add virtio pci support
  virtio-gpu: fix error message

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-16 10:35:43 +01:00
Peter Maydell 46bca5404b s390x/kvm/watchdog
1. Implement a diag288 based watchdog
 2. Fix virtio-ccw BIOS for gcc >= 4.9
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJVfri5AAoJEBF7vIC1phx8ME4P/AgMYstY5sjzmSYKAXLhwmZl
 vDaxZ1MqoRZQfzPWXcPGavNFb9lnebLkedWO4FvYWWoVRxUHThKF2d5PDz8qsS7C
 lNhp0YNiMHcvSv8mlAr9TVP3ssKbp0YFyhZAIEtjlAesnbHl0URfPUulx0TpKHsg
 EqEiwFPB+eUHD1GiBa+x7bTCnyp8Ppn9SrGItJR0Mq7AjLzvjtwATPZbLk+I6mwN
 Nqd0uhYScbi6NX4UlifzaYYePjAQmN2ZhLwzuasqHhhJtAm8M6EPXkwxb9X5elWJ
 cZmCEkYMD+j5G6Lqm3ZV44g1fSM9k4ZctcOUpQzPmS+sDj48ydDDkgy/hiY/Fu6e
 Xf3Ti6ChSQMjQc9vcYWHtdAt+rvYAxOqTK//hHp87MADsREYjhVXVBMubJZ5h+z0
 eEtuKo6npZg1AD8lFdCMEyvqWHqldVYiZfJwTBoCbX26bEpkbQhy11PjD7Sm3lP0
 EVad06C1Rv4Gr6uiL+4Pqulm6G8CqATiLMUrE9VkI7WhtwOa81OQS6v+dlVIERLF
 ueKt7bhCBIQrmdsAsNlC5nvP39pCkkBjogdw+S7UttTFA9KEKr8gMjHVAdNNk/Or
 OBi1YBJOCc2CcE/0mVpC8okgprOP3AOjPGn+wmlRNw2s3TOlmVN/rz/d6lr/rPFV
 VIpdMY0RuQSQY36qUdEo
 =WVga
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150615' into staging

s390x/kvm/watchdog

1. Implement a diag288 based watchdog
2. Fix virtio-ccw BIOS for gcc >= 4.9

# gpg: Signature made Mon Jun 15 12:36:25 2015 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20150615:
  s390/bios: build with -fdelete-null-pointer-checks
  watchdog: Add new Virtual Watchdog action INJECT-NMI
  nmi: Implement inject_nmi() for non-monitor context use
  s390x/watchdog: diag288 migration support
  s390x/kvm: diag288 instruction interception and handling
  s390x/watchdog: introduce diag288 watchdog device
  watchdog: change option wording to allow for more watchdogs

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15 13:24:51 +01:00
Gerd Hoffmann c5d4dac86b virtio-vga: add virtio gpu device with vga compatibility
This patch adds a virtio-vga device.  It is simliar to virtio-gpu-pci,
but it also adds in vga compatibility, so guests without native
virtio-gpu support can drive the device in vga mode.  It is compatible
with stdvga.

Written by Dave Airlie and Gerd Hoffmann.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12 10:13:23 +02:00
Xu Wang 188f24c2c1 s390x/watchdog: introduce diag288 watchdog device
This patch introduces a new diag288 watchdog device that will, just like
other watchdogs, monitor a guest and take corresponding actions when it
detects that the guest is not responding.

diag288 is s390x specific. The wiring to s390x KVM will be done in
separate patches.

Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out qemu-option.hx base changes]
2015-06-11 17:45:49 +02:00
Hervé Poussineau 9b1d21c53b mips jazz: compile only in 64 bit
Remove now useless device models from other MIPS configurations

We're now compiling 12 files less than before.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11 10:13:29 +01:00
Shannon Zhao 135a67a692 ACPI: split CONFIG_ACPI into 4 pieces
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86
to make it only for x86. ARM doesn't support cpu and memory hotplug, add
CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them
for target-arm.

Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29 11:28:59 +01:00
Peter Crosthwaite f0a902f764 arm: Introduce Xilinx ZynqMP SoC
With quad Cortex-A53 CPUs.

Use SMC PSCI, with the standard policy of secondaries starting in
power-off.

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a16202a6c7b79e446e5289d38cb18d2ee4b897a0.1431381507.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-18 16:41:09 +01:00
Scott Feldman dc488f8880 rocker: add new rocker switch device
Rocker is a simulated ethernet switch device.  The device supports up to 62
front-panel ports and supports L2 switching and L3 routing functions, as well
as L2/L3/L4 ACLs.  The device presents a single PCI device for each switch,
with a memory-mapped register space for device driver access.

Rocker device is invoked with -device, for example a 4-port switch:

  -device rocker,name=sw1,len-ports=4,ports[0]=dev0,ports[1]=dev1, \
         ports[2]=dev2,ports[3]=dev3

Each port is a netdev and can be paired with using -netdev id=<port name>.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1426306173-24884-7-git-send-email-sfeldma@gmail.com

rocker: fix clang compiler errors

Consolidate all forward typedef declarations to rocker.h.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>

rocker: add support for flow modification

We had support for flow add/del.  This adds support for flow mod.  I needed
this for L3 support where an existing route is modified using NLM_F_REPLACE.
For example:

  ip route add 12.0.0.0/30 nexthop via 11.0.0.1 dev swp1
  ip route change 12.0.0.0/30 nexthop via 11.0.0.9 dev swp2

The first cmd adds the route.  The second cmd changes the existing route by
changing its nexthop info.

In the device, a mod operation results in the matching flow enty being modified
with the new settings.  This is atomic to the device.

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-11 14:49:04 +01:00
Peter Crosthwaite a0970d91c9 defconfigs: Piggyback microblazeel on microblaze
Theres no difference in defconfig. Going forward microblazeel should
superset microblaze so use an include.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30 16:05:48 +03:00
Thomas Huth 8ffd9f4dd4 hw/usb: Include USB files only if necessary
Boards that do not include an USB controller should not provide
USB devices. However, when running "qemu-system-s390x -device help"
for example, there's still a usb-hub, usb-kbd, usb-mouse and
usb-tablet in the list of "supported" devices. Let's fix that
by compiling and linking the USB files only if it is really
necessary.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-18 11:50:47 +01:00
Thomas Huth be0b608a54 s390x/config: Do not include full pci.mak
pci.mak includes a lot of devices - and most of them do not make
sense on s390x, like USB controllers or audio cards. These devices
also show up when running "qemu-system-s390x -device help" and thus
could raise the hope for the users that they could use these kind
of devices with qemu-system-s390x. To avoid this confusion, we
should not include pci.mak and rather include the bare minimum
manually instead.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Message-Id: <1426169954-6062-1-git-send-email-thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16 10:20:17 +01:00
Gerd Hoffmann da076ffed6 configure: opengl overhaul
Rename config option from "glx" to "opengl", glx will not be the only
option for opengl in near future.  Also switch over to pkg-config for
opengl support detection.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-03-12 15:49:57 +01:00
Alistair Francis db635521a0 stm32f205: Add the stm32f205 SoC
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:06 +00:00
Alistair Francis bbbbd9002f stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).

This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Alistair Francis 73af5d1115 stm32f2xx_USART: Add the stm32f2xx USART Controller
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Alistair Francis be28470514 stm32f2xx_timer: Add the stm32f2xx Timer
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5
to QEMU.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11 13:21:05 +00:00
Alexander Graf 6494ad9bf4 PPC: Remove duplicate OPENPIC defines in default-configs
The CONFIG_OPENPIC variable was declared multiple times. We only need it once.

Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 15:00:07 +01:00
Alexey Kardashevskiy 46ca011665 ppc64-softmmu: Remove duplicated OPENPIC from config
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09 15:00:07 +01:00