This allows VGA to decide whether to use a shared surface based on
whether the UI backend supports the format or not. Backends that
don't provide the new callback fallback to native 32 bpp which
is equivalent to what was supported before.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ kraxel: fix console check, allow only 32 bpp as fallback ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In order to remove the logic for detecting supported shared
pixmap formats from device models, make qemu_default_pixman_format()
capable for failing by returning 0 which is not a possible format
value rather than asserting.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Apparently it is possible for X to send an event to a hidden SDL2
window, leading to SDL2 believing it is now shown. SDL2 will pass the
SDL_WINDOWEVENT_SHOWN message to the application without actually
showing the window; the problem is that the next SDL_ShowWindow() will
be a no-op because SDL2 assumes the window is already shown.
The correct way to react to SDL_WINDOWEVENT_SHOWN would be to clear
scon->hidden (analogous for SDL_WINDOWEVENT_HIDDEN). However, due to the
window not actually being shown, this will somehow not be correct after
all.
Therefore, just hide the window on SDL_WINDOWEVENT_SHOWN if it is
supposed to be hidden (and analogous for SDL_WINDOWEVENT_HIDDEN).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
SDL_PollEvent() polls events for all windows; therefore,
sdl2_poll_events() will poll the events for all windows and not only for
the one identified by the given sdl2_console.
This should be considered in handle_windowevent(): The window affected
by the event is not necessarily the one identified by the sdl2_console
object given to sdl2_poll_events(), but the one identified by
ev->window.windowID.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that common event handling code is split off, we can move
over sdl_refresh to sdl2-2d.c, and rename it to sdl2_2d_refresh.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create a new function to poll and handle sdl2 events,
which is then just called from the refresh timer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a new sdl2_2d_redraw function for a complete screen refresh,
so we can stop using graphic_hw_invalidate for that. There is
no need to bother console / gfx emulation code if we are just
going to re-blit the screen after window resizes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Split do_sdl_resize function (which does alot more than just resizing)
into three: sdl2_window_{create,destroy,resize}.
Fix SDL_Renderer handling: must be guest display size not host window
size, and SDL2 will magically handle all scaling for us.
Make fullscreen actually enter fullscreen mode and simplify the code.
There is no need to store the original window size, the window manager
will do that for us.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create new sdl2-2d file for 2d display rendering.
Move over sdl_update code, and rename to sdl2_2d_update.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Makes quite some keys actually go to the guest instead of
being captured by the host window manager.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Create sdl2.h header file, in preparation for sdl2 code splitup.
Populate it with sdl2_console struct (renamed from sdl2_state).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If errors happen for middle items of channel_list,
qmp_query_spice_channels() returns NULL, and the variable
cur_item going out of scope leaks the storage it points to.
The flag is a compatibility thing for older spice-server
versions. Meanwhile our minimum spice version requirement is
new enough that we should never ever see this error, and if we
do something went very seriously wrong. Let's using assert()
instead of returning NULL to avoid a memory leak.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Nothing seems to be using functions from spice-experimental.h (better
that way). Let's remove its inclusion.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is possible to use Spice server without TCP port. On local VM,
qemu (and libvirt) can add new clients thanks to QMP add_client command.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add fast path to qemu_spice_display_switch in case old and new
displaysurface have identical size (happens with display panning
and page flipping). We just swap the backing store then and don't
go through the whole process of deleting and creating the primary
surface.
To simplify the code a bit move mirror surface allocation to
qemu_spice_display_switch().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calling directly doesn't work due to the qxl-render code running in
spice server thread context. Meanwhile bottom half scheduling is
thread-safe though, so we can use that to kick a cursor update in
main i/o thread context.
Cc: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Compile sdl.c / sdl2.c depending on CONFIG_SDLABI instead of
compiling both and have version #ifdefs in the source code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It's hard to read because of the confused coding
style in this file. Let's correct it following Qemu
coding style.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Arguments in wrong order (SWAPPED_ARGUMENTS)
The positions of arguments in the call to
tight_fill_palette do not match the ordering of the parameters:
&fg is passed to bg
&bg is passed to fg
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a crash by just skipping the vte resize hack if cur is NULL.
Reproducer:
qemu-system-x86_64 -nodefaults
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
local_err in gd_vc_gfx_init() is not freed, and we don't use it,
so remove it.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.
Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.
I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.
If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.
For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.
Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.
So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In fullscreen mode, we attempt to shrink the menubar to 1 pixel in height,
so it takes up as little room as possible while still allowing us to use
the keyboard shortcuts for its various operations.
However this shrinking is disregarded on gtk3, so the entire menu bar is
visible, which isn't very pleasant. This patch hides the menu bar instead.
The side effect is that the only keyboard shortcuts that will work in this
mode are the ones that we explicitly register on the top level window and
not the menu bar. The previous patches changed the fullscreen and vc
shortcuts to work like that, which I think are the only ones that really
matter in for the fullscreen case.
https://bugs.launchpad.net/qemu/+bug/1294898
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So they are usable when we hide the menubar in upcoming patches. This
has the accelerator text caveat as the fullscreen bit in the previous
patch.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of installing it on the menu. This will be needed to keep the
fullscreen keyboard shortcut working when we hide the menu (in future
patches).
On gtk < 3.8, this has the unfortunate side effect of no longer listing
the key combo in the UI. We could manually change the label in that case,
but it will look visually out of place, and I'm not sure if anyone really
cares.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
graphic_hw_update and vnc_refresh_server_surface aren't
need to do when no vnc client connected. It can reduce
lock contention, because vnc_refresh will hold global big
lock two millisecond every three seconds.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bits_per_pixel that are less than 8 could result in accessing
non-initialized buffers later in the code due to the expectation
that bytes_per_pixel value that is used to initialize these buffers is
never zero.
To fix this check that bits_per_pixel from the client is one of the
values that the rfb protocol specification allows.
This is CVE-2014-7815.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
[ kraxel: apply codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Special handing of the Pause key. Implemented in a similar way as in
ui/sdl.c.
Signed-off-by: Martin Decky <martin@decky.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this memory leak is introduced by the original
commit 3158a3482b
valgrind out showing:
==14553== 21,459 (72 direct, 21,387 indirect) bytes in 1 blocks are definitely
lost in loss record 8,055 of 8,082
==14553== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==14553== by 0x80DBFBC: XkbGetKeyboardByName (in /usr/lib64/libX11.so.6.3.0)
==14553== by 0x40C704: gtk_display_init (gtk.c:1798)
==14553== by 0x1AEDC1: main (vl.c:4480)
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function to allow display emulations to switch the hwops
function pointers. This is useful for devices which have two
completely different operation modes. Typical case is the vga
compatibility mode vs. native mode in qxl and the upcoming
virtio-vga device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.
This solves losing password when changing expiration in qemu monitor.
https://bugzilla.redhat.com/show_bug.cgi?id=1138639
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
