Use address 0x390 and 0x391 for the ePMP CSRs.
Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com>
Signed-off-by: Hou Weiying <weiying_hou@outlook.com>
Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 63245b559f477a9ce6d4f930136d2d7fd7f99c78.1618812899.git.alistair.francis@wdc.com
[ Changes by AF:
- Tidy up commit message
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The RISC-V spec says:
if PMP entry i is locked and pmpicfg.A is set to TOR, writes to
pmpaddri-1 are ignored.
The current QEMU code ignores accesses to pmpaddri-1 and pmpcfgi-1 which
is incorrect.
Update the pmp_is_locked() function to not check the supporting fields
and instead enforce the lock functionality in the pmpaddr write operation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 2831241458163f445a89bd59c59990247265b0c6.1618812899.git.alistair.francis@wdc.com
Add documentation for Shakti C reference platform.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210412174248.8668-1-vijai@behindbytes.com
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
[ Changes from Bin Meng:
- Add missing TOC
Message-id: 20210430070534.1487242-1-bmeng.cn@gmail.com
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The overflow predication ((a - b) ^ a) & (a ^ b) & INT64_MIN is right.
However, when the predication is ture and a is 0, it should return maximum.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210212150256.885-4-zhiwei_liu@c-sky.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previously the qemu monitor and gdbstub looked at SUM and refused to
perform accesses to user memory if it is off, which was an impediment to
debugging.
Signed-off-by: Jade Fink <qemu@jade.fyi>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210406113109.1031033-1-qemu@jade.fyi
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
imply VIRTIO_VGA for the virt machine, this fixes the following error
when specifying `-vga virtio` as a command line argument:
qemu-system-riscv64: Virtio VGA not available
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: 7ac26fafee8bd59d2a0640f3233f8ad1ab270e1e.1617367317.git.alistair.francis@wdc.com
Update the OpenTitan interrupt layout to match the latest OpenTitan
bitstreams. This involves changing the Ibex PLIC memory layout and the
UART interrupts.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-id: e92b696f1809c9fa4410da2e9f23c414db5a6960.1617202791.git.alistair.francis@wdc.com
Update the RISC-V maintainers by removing Sagar and Bastian who haven't
been involved recently.
Also add Bin who has been helping with reviews.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 6564ba829c40ad9aa7d28f43be69d8eb5cf4b56b.1617749142.git.alistair.francis@wdc.com
Connect one shakti uart to the shakti_c machine.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-5-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This is the initial implementation of Shakti UART.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-4-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
C-Class is a member of the SHAKTI family of processors from IIT-M.
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210401181457.73039-2-vijai@behindbytes.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This was accidentally dropped before. Add it back.
Fixes: 732612856a ("hw/riscv: Drop 'struct MemmapEntry'")
Reported-by: Emmanuel Blot <eblot.ml@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210331103612.654261-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use target_ulong to instead of uint64_t on reset vector address
to adapt on both 32/64 machine.
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Signed-off-by: Ruinland ChuanTzu Tsai <ruinland@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210329034801.22667-1-dylan@andestech.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix style to have a proper description of the parameter 'force-raw'.
Signed-off-by: Axel Heider <axelheider@gmx.de>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: a7e50a64-1c7c-2d41-96d3-d8a417a659ac@gmx.de
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Qemu doesn't support RISC-V privilege specification v1.9. Remove the
remaining v1.9 specific references from the implementation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210319194534.2082397-2-atish.patra@wdc.com>
[Changes by AF:
- Rebase on latest patches
- Bump the vmstate_riscv_cpu version_id and minimum_version_id
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* docs: fix link in sbsa description
* linux-user/aarch64: Enable hwcap for RND, BTI, and MTE
* target/arm: Fix tlbbits calculation in tlbi_aa64_vae2is_write()
* target/arm: Split neon and vfp translation to their own
compilation units
* target/arm: Make WFI a NOP for userspace emulators
* hw/sd/omap_mmc: Use device_cold_reset() instead of
device_legacy_reset()
* include: More fixes for 'extern "C"' block use
* hw/arm/imx25_pdk: Fix error message for invalid RAM size
* hw/arm/mps2-tz: Implement AN524 memory remapping via machine property
* hw/arm/xlnx: Fix PHY address for xilinx-zynq-a9
-----BEGIN PGP SIGNATURE-----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=E7yJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210510-1' into staging
target-arm queue:
* docs: fix link in sbsa description
* linux-user/aarch64: Enable hwcap for RND, BTI, and MTE
* target/arm: Fix tlbbits calculation in tlbi_aa64_vae2is_write()
* target/arm: Split neon and vfp translation to their own
compilation units
* target/arm: Make WFI a NOP for userspace emulators
* hw/sd/omap_mmc: Use device_cold_reset() instead of
device_legacy_reset()
* include: More fixes for 'extern "C"' block use
* hw/arm/imx25_pdk: Fix error message for invalid RAM size
* hw/arm/mps2-tz: Implement AN524 memory remapping via machine property
* hw/arm/xlnx: Fix PHY address for xilinx-zynq-a9
# gpg: Signature made Mon 10 May 2021 17:26:55 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210510-1: (26 commits)
hw/arm/xlnx: Fix PHY address for xilinx-zynq-a9
hw/arm/mps2-tz: Implement AN524 memory remapping via machine property
hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping
hw/misc/mps2-scc: Add "QEMU interface" comment
hw/arm/imx25_pdk: Fix error message for invalid RAM size
include/disas/dis-asm.h: Handle being included outside 'extern "C"'
include/qemu/bswap.h: Handle being included outside extern "C" block
osdep: Make os-win32.h and os-posix.h handle 'extern "C"' themselves
hw/sd/omap_mmc: Use device_cold_reset() instead of device_legacy_reset()
target/arm: Make WFI a NOP for userspace emulators
target/arm: Make translate-neon.c.inc its own compilation unit
target/arm: Make functions used by translate-neon global
target/arm: Move NeonGenThreeOpEnvFn typedef to translate.h
target/arm: Delete unused typedef
target/arm: Move vfp_reg_ptr() to translate-neon.c.inc
target/arm: Make translate-vfp.c.inc its own compilation unit
target/arm: Make functions used by translate-vfp global
target/arm: Move vfp_{load, store}_reg{32, 64} to translate-vfp.c.inc
target/arm: Move gen_aa32 functions to translate-a32.h
target/arm: Split m-nocp trans functions into their own file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit dfc388797c ("hw/arm: xlnx: Set all boards' GEM 'phy-addr'
property value to 23") configured the PHY address for xilinx-zynq-a9
to 23. When trying to boot xilinx-zynq-a9 with zynq-zc702.dtb or
zynq-zc706.dtb, this results in the following error message when
trying to use the Ethernet interface.
macb e000b000.ethernet eth0: Could not attach PHY (-19)
The devicetree files for ZC702 and ZC706 configure PHY address 7. The
documentation for the ZC702 and ZC706 evaluation boards suggest that the
PHY address is 7, not 23. Other boards use PHY address 0, 1, 3, or 7.
I was unable to find a documentation or a devicetree file suggesting
or using PHY address 23. The Ethernet interface starts working with
zynq-zc702.dtb and zynq-zc706.dtb when setting the PHY address to 7,
so let's use it.
Cc: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210504124140.1100346-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AN524 FPGA image supports two memory maps, which differ in where
the QSPI and BRAM are. In the default map, the BRAM is at
0x0000_0000, and the QSPI at 0x2800_0000. In the second map, they
are the other way around.
In hardware, the initial mapping can be selected by the user by
writing either "REMAP: BRAM" (the default) or "REMAP: QSPI" in the
board configuration file. The board config file is acted on by the
"Motherboard Configuration Controller", which is an entirely separate
microcontroller on the dev board but outside the FPGA.
The guest can also dynamically change the mapping via the SCC
CFG_REG0 register.
Implement this functionality for QEMU, using a machine property
"remap" with valid values "BRAM" and "QSPI" to allow the user to set
the initial mapping, in the same way they can on the FPGA, and
wiring up the bit from the SCC register to also switch the mapping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210504120912.23094-4-peter.maydell@linaro.org
On some boards, SCC config register CFG0 bit 0 controls whether
parts of the board memory map are remapped. Support this with:
* a device property scc-cfg0 so the board can specify the
initial value of the CFG0 register
* an outbound GPIO line which tracks bit 0 and which the board
can wire up to provide the remapping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
The MPS2 SCC device doesn't have any documentation of its properties;
add a "QEMU interface" format comment describing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
The i.MX25 PDK board has 2 banks for SDRAM, each can
address up to 256 MiB. So the total RAM usable for this
board is 512M. When we ask for more we get a misleading
error message:
$ qemu-system-arm -M imx25-pdk -m 513M
qemu-system-arm: Invalid RAM size, should be 128 MiB
Update the error message to better match the reality:
$ qemu-system-arm -M imx25-pdk -m 513M
qemu-system-arm: RAM size more than 512 MiB is not supported
Fixes: bf350daae0 ("arm/imx25_pdk: drop RAM size fixup")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210407225608.1882855-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make dis-asm.h handle being included outside an 'extern "C"' block;
this allows us to remove the 'extern "C"' blocks that our two C++
files that include it are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Make bswap.h handle being included outside an 'extern "C"' block:
all system headers are included first, then all declarations are
put inside an 'extern "C"' block.
This requires a little rearrangement as currently we have an ifdef
ladder that has some system includes and some local declarations
or definitions, and we need to separate those out.
We want to do this because dis-asm.h includes bswap.h, dis-asm.h
may need to be included from C++ files, and system headers should
not be included within 'extern "C"' blocks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Both os-win32.h and os-posix.h include system header files. Instead
of having osdep.h include them inside its 'extern "C"' block, make
these headers handle that themselves, so that we don't include the
system headers inside 'extern "C"'.
This doesn't fix any current problems, but it's conceptually the
right way to handle system headers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The omap_mmc_reset() function resets its SD card via
device_legacy_reset(). We know that the SD card does not have a qbus
of its own, so the new device_cold_reset() function (which resets
both the device and its child buses) is equivalent here to
device_legacy_reset() and we can just switch to the new API.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430222348.8514-1-peter.maydell@linaro.org
The WFI insn is not system-mode only, though it doesn't usually make
a huge amount of sense for userspace code to execute it. Currently
if you try it in qemu-arm then the helper function will raise an
EXCP_HLT exception, which is not covered by the switch in cpu_loop()
and results in an abort:
qemu: unhandled CPU exception 0x10001 - aborting
R00=00000001 R01=408003e4 R02=408003ec R03=000102ec
R04=00010a28 R05=00010158 R06=00087460 R07=00010158
R08=00000000 R09=00000000 R10=00085b7c R11=408002a4
R12=408002b8 R13=408002a0 R14=0001057c R15=000102f8
PSR=60000010 -ZC- A usr32
qemu:handle_cpu_signal received signal outside vCPU context @ pc=0x7fcbfa4f0a12
Make the WFI helper function return immediately in the usermode
emulator. This turns WFI into a NOP, which is OK because:
* architecturally "WFI is a NOP" is a permitted implementation
* aarch64 Linux kernels use the SCTLR_EL1.nTWI bit to trap
userspace WFI and NOP it (though aarch32 kernels currently
just let WFI do whatever it would do)
We could in theory make the translate.c code special case user-mode
emulation and NOP the insn entirely rather than making the helper
do nothing, but because no real world code will be trying to
execute WFI we don't care about efficiency and the helper provides
a single place where we can make the change rather than having
to touch multiple places in translate.c and translate-a64.c.
Fixes: https://bugs.launchpad.net/qemu/+bug/1926759
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430162212.825-1-peter.maydell@linaro.org
Switch translate-neon.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-14-peter.maydell@linaro.org
Make the remaining functions needed by the translate-neon code
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-13-peter.maydell@linaro.org
Move the NeonGenThreeOpEnvFn typedef to translate.h together
with the other similar typedefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-12-peter.maydell@linaro.org
The VFPGenFixPointFn typedef is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-11-peter.maydell@linaro.org
The function vfp_reg_ptr() is used only in translate-neon.c.inc;
move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-10-peter.maydell@linaro.org
Switch translate-vfp.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-9-peter.maydell@linaro.org
Make the remaining functions which are needed by translate-vfp.c.inc
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-8-peter.maydell@linaro.org
The functions vfp_load_reg32(), vfp_load_reg64(), vfp_store_reg32()
and vfp_store_reg64() are used only in translate-vfp.c.inc. Move
them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-7-peter.maydell@linaro.org
Move the various gen_aa32* functions and macros out of translate.c
and into translate-a32.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-6-peter.maydell@linaro.org
Currently the trans functions for m-nocp.decode all live in
translate-vfp.inc.c; move them out into their own translation unit,
translate-m-nocp.c.
The trans_* functions here are pure code motion with no changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-5-peter.maydell@linaro.org
We want to split out the .c.inc files which are currently included
into translate.c so they are separate compilation units. To do this
we need to make some functions which are currently file-local to
translate.c have global scope; create a translate-a32.h paralleling
the existing translate-a64.h as a place for these declarations to
live, so that code moved into the new compilation units can call
them.
The functions made global here are those required by the
m-nocp.decode functions, except that I have converted the whole
family of {read,write}_neon_element* and also both the load_cpu and
store_cpu functions for consistency, even though m-nocp only wants a
few functions from each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-4-peter.maydell@linaro.org
The unallocated_encoding() function is the same in both
translate-a64.c and translate.c; make the translate.c function global
and drop the translate-a64.c version. To do this we need to also
share gen_exception_insn(), which currently exists in two slightly
different versions for A32 and A64: merge those into a single
function that can work for both.
This will be useful for splitting up translate.c, which will require
unallocated_encoding() to no longer be file-local. It's also
hopefully less confusing to have only one version of the function
rather than two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-3-peter.maydell@linaro.org
Some of the constant expanders defined in translate.c are generically
useful and will be used by the separate C files for VFP and Neon once
they are created; move the expander definitions to translate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-2-peter.maydell@linaro.org
In tlbi_aa64_vae2is_write() the calculation
bits = tlbbits_for_regime(env, secure ? ARMMMUIdx_E2 : ARMMMUIdx_SE2,
pageaddr)
has the two arms of the ?: expression reversed. Fix the bug.
Fixes: b6ad6062f1
Reported-by: Rebecca Cran <rebecca@nuviainc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Message-id: 20210420123106.10861-1-peter.maydell@linaro.org
A trailing _ makes all the difference to the rendered link.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210428131316.31390-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis
Hou Weiying
Vijai Kumar K
LIU Zhiwei
Jade Fink
Bin Meng
Dylan Jhong
Axel Heider
Atish Patra
Peter Maydell
Guenter Roeck
Philippe Mathieu-Daudé
Richard Henderson
Alex Bennée