Move the calculation of a CPU's VCPU ID out of the generic PPC code
(ppc_cpu_realizefn()) and into sPAPR specific code
(spapr_cpu_core_realize()) where it belongs.
Unfortunately, due to the way things are ordered, we still need to
default the VCPU ID in ppc_cpu_realizfn() but at least doing that
doesn't require any interaction with sPAPR.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
PPC handles -cpu FOO rather incosistently,
i.e. it does case-insensitive matching of FOO to
a CPU type (see: ppc_cpu_compare_class_name) but
handles alias names as case-sensitive, as result:
# qemu-system-ppc64 -M mac99 -cpu g3
qemu-system-ppc64: unable to find CPU model ' kN�U'
# qemu-system-ppc64 -cpu 970MP_V1.1
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
while
# qemu-system-ppc64 -M mac99 -cpu G3
# qemu-system-ppc64 -cpu 970MP_v1.1
start up just fine.
Considering we can't take case-insensitive matching away,
make it case-insensitive for all alias/type/core_type
lookups.
As side effect it allows to remove duplicate core types
which are the same except of using different cased letters in name.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM now allows writing to KVM_CAP_PPC_SMT which has previously been
read only. Doing so causes KVM to act, for that VM, as if the host's
SMT mode was the given value. This is particularly important on Power
9 systems because their default value is 1, but they are able to
support values up to 8.
This patch introduces a way to control this capability via a new
machine property called VSMT ("Virtual SMT"). If the value is not set
on the command line a default is chosen that is, when possible,
compatible with legacy systems.
Note that the intialization of KVM_CAP_PPC_SMT has changed slightly
because it has changed (in KVM) from a global capability to a
VM-specific one. This won't cause a problem on older KVMs because VM
capabilities fall back to global ones.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM PR doesn't allow to set a compat mode. This causes ppc_set_compat_all()
to fail and we return H_HARDWARE to the guest right away.
This is excessive: even if we favor compat mode since commit 152ef803ce,
we should at least fallback to raw mode if the guest supports it.
This patch modifies cas_check_pvr() so that it also reports that the real
PVR was found in the table supplied by the guest. Note that this is only
makes sense if raw mode isn't explicitely disabled (ie, the user didn't
set the machine "max-cpu-compat" property). If this is the case, we can
simply ignore ppc_set_compat_all() failures, and let the guest run in raw
mode.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently crashes when the user tries to add a spapr-cpu-core
on a non-pseries machine:
$ qemu-system-ppc64 -S -machine ppce500,accel=tcg \
-device POWER5+_v2.1-spapr-cpu-core
hw/ppc/spapr_cpu_core.c:178:spapr_cpu_core_realize_child:
Object 0x55cee1f55160 is not an instance of type spapr-machine
Aborted (core dumped)
So let's add a proper check for the correct machine time with
a more friendly error message here.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make these device models available outside ppc405_uc.c for reuse in
460EX emulation. They are left in their current place for now because
they are used mostly unchanged and I'm not sure these correctly model
the components in 440 SoCs (but they seem to be good enough). These
functions could be moved in a subsequent clean up series when this is
confirmed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This device appears in other SoCs as well not just in 405 ones and
subsequent patches will modify it, so move it out of ppc405_uc.c in
preparation
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow MAL with more RX and TX channels as found in newer versions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This device appears in other SoCs as well not just in 405 ones
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This replaces g_malloc() with spapr_tce_alloc_table() as this is
the standard way of allocating tables and this allows moving the table
back to KVM when unplugging a VFIO PCI device and VFIO TCE acceleration
support is not present in the KVM.
Although spapr_tce_alloc_table() is expected to fail with EBUSY
if called when previous fd is not closed yet, in practice we will not
see it because cap_spapr_vfio is false at the moment.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The concept of a VCPU ID that differs from the CPU's index
(cpu->cpu_index) exists only within SPAPR machines so, move the
functions ppc_get_vcpu_id() and ppc_get_cpu_by_vcpu_id() into spapr.c
and rename them appropriately.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This field actually records the VCPU ID used by KVM and, although the
value is also used in the device tree it is primarily the VCPU ID so
rename it as such.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[dwg: Updated comment missed in cpu.h]
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The e500 platform code uses the function ppc_get_vcpu_dt_id() to get
an id to put in its device tree. Which seems like it makes sense, but
ppc_get_vcpu_dt_id() is actually badly named - it only differs from
cpu_index in cases where you're running on KVM HV and the host's
number of threads differs from the guests. Since KVM HV only supports
PAPR, not e500, it doesn't make sense to use it here.
Simply use the cpu_index instead (which is 'i' in this context
because qemu_get_cpu(i) returns the cpu with cpu_index == i).
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
[dwg: Rewrote commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TCE table objects attach themselves to an owner as a child
property. unref afterward to allow them to be finalized
when their owner is finalized.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
DRC objects attach themselves to an owner as a child
property. unref afterward to allow them to be finalized
when their owner is finalized.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When hot-unplugging a PHB, all its PCI DRC connectors get unrealized. This
patch adds an unrealize method to the physical DRC class, in order to undo
registrations performed in realize_physical().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This memory region should be owned by the PHB. This ensures the PHB
cannot be finalized as long as the the region is guest visible, or
used by a CPU or a device.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Passing a stack allocated buffer of arbitrary length to snprintf()
without checking the return value can cause the resultant strings
to be silently truncated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Passing a stack allocated buffer of arbitrary length to snprintf()
without checking the return value can cause the resultant strings
to be silently truncated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Passing a null priority to memory_region_add_subregion_overlap() is
strictly equivalent to calling memory_region_add_subregion().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch is a follow up on the discussions made in patch
"hw/ppc: disable hotplug before CAS is completed" that can be
found at [1].
At this moment, we do not support CPU/memory hotplug in early
boot stages, before CAS. When a hotplug occurs, the event is logged
in an internal RTAS event log queue and an IRQ pulse is fired. In
regular conditions, the guest handles the interrupt by executing
check_exception, fetching the generated hotplug event and enabling
the device for use.
In early boot, this IRQ isn't caught (SLOF does not handle hotplug
events), leaving the event in the rtas event log queue. If the guest
executes check_exception due to another hotplug event, the re-assertion
of the IRQ ends up de-queuing the first hotplug event as well. In short,
a device hotplugged before CAS is considered coldplugged by SLOF.
This leads to device misbehavior and, in some cases, guest kernel
Ooops when trying to unplug the device.
A proper fix would be to turn every device hotplugged before CAS
as a colplugged device. This is not trivial to do with the current
code base though - the FDT is written in the guest memory at
ppc_spapr_reset and can't be retrieved without adding extra state
(fdt_size for example) that will need to managed and migrated. Adding
the hotplugged DT in the middle of CAS negotiation via the updated DT
tree works with CPU devs, but panics the guest kernel at boot. Additional
analysis would be necessary for LMBs and PCI devices. There are
questions to be made in QEMU/SLOF/kernel level about how we can make
this change in a sustainable way.
With Linux guests, a fix would be the kernel executing check_exception
at boot time, de-queueing the events that happened in early boot and
processing them. However, even if/when the newer kernels start
fetching these events at boot time, we need to take care of older
kernels that won't be doing that.
This patch works around the situation by issuing a CAS reset if a hotplugged
device is detected during CAS:
- the DRC conditions that warrant a CAS reset is the same as those that
triggers a DRC migration - the DRC must have a device attached and
the DRC state is not equal to its ready_state. With that in mind, this
patch makes use of 'spapr_drc_needed' to determine if a CAS reset
is needed.
- In the middle of CAS negotiations, the function
'spapr_hotplugged_dev_before_cas' goes through all the DRCs to see
if there are any DRC that requires a reset, using spapr_drc_needed. If
that happens, returns '1' in 'spapr_h_cas_compose_response' which will set
spapr->cas_reboot to true, causing the machine to reboot.
No changes are made for coldplug devices.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg02855.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR machine isn't clearing up the pending events QTAILQ on
machine reboot. This allows for unprocessed hotplug/epow events
to persist in the queue after reset and, when reasserting the IRQs in
check_exception later on, these will be being processed by the OS.
This patch implements a new function called 'spapr_clear_pending_events'
that clears up the pending_events QTAILQ. This helper is then called
inside ppc_spapr_reset to clear up the events queue, preventing
old/deprecated events from persisting after a reset.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch makes a small fix in 'spapr_drc_needed' to change how we detect
if a DRC has a device attached. Previously it used dr_entity_sense for this,
which works for physical DRCs.
However, for logical DRCs, it didn't cover the case where a logical DRC has
a drc->dev but the state is LOGICAL_UNUSABLE (e.g. a hotplugged CPU before
CAS). In this case, the dr_entity_sense of this DRC returns UNUSABLE and the
code was considering that there were no dev attached, making spapr_drc_needed
return 'false' when in fact we would like to migrate the DRC.
Changing it to check for drc->dev instead works for all DRC types.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
it's just a wrapper, drop it and use cpu_generic_init() directly
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1503592308-93913-26-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU currently aborts unexpectedly when the user tries to add and
remove a "spapr-tce-table" device:
$ qemu-system-ppc64 -nographic -S -nodefaults -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add spapr-tce-table,id=x
(qemu) device_del x
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
The device should not be accessable for the users at all, it's just
used internally, so mark it with user_creatable = false.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently aborts unexpectedly when a user tries to do something
like this:
$ qemu-system-ppc64 -nographic -S -nodefaults -monitor stdio
QEMU 2.9.92 monitor - type 'help' for more information
(qemu) device_add spapr-rtc,id=spapr-rtc
(qemu) device_del spapr-rtc
**
ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl)
Aborted (core dumped)
The RTC device is not meant to be hot-pluggable - it's an internal
device only and it even should not be possible to create it a
second time with the "-device" parameter, so let's mark this
with "user_creatable = false".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
QEMU currently crashes when trying to use a 'pc-dimm' on the pseries
machine without specifying its 'memdev' property. This happens because
pc_dimm_get_memory_region() does not check whether the 'memdev' property
has properly been set by the user. Looking closer at this function, it's
also obvious that it is using &error_abort to call another function - and
this is bad in a function that is used in the hot-plugging calling chain
since this can also cause QEMU to exit unexpectedly.
So let's fix these issues in a proper way now: Add a "Error **errp"
parameter to pc_dimm_get_memory_region() which we use in case the 'memdev'
property has not been set by the user, and which we can use instead of
the &error_abort, and change the callers of get_memory_region() to make
use of this "errp" parameter for proper error checking.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In case of in-kernel memory hot unplug, when the guest is not able
to remove all the LMBs that are requested for removal, it will add back
any LMBs that have been successfully removed. The DR Connectors of
these LMBs wouldn't have been unconfigured and hence the addition of
these LMBs will result in configure-connector call being issued on
LMB DR connectors that are already in configured state. Such
configure-connector calls will fail resulting in a DIMM which is
partially unplugged.
This however worked till recently before we overhauled the DRC
implementation in QEMU. Commit 9d4c0f4f0a71e: "spapr: Consolidate
DRC state variables" is the first commit where this problem shows up
as per git bisect.
Ideally guest shouldn't be issuing configure-connector call on an
already configured DR connector. However for now, work around this in
QEMU by allowing configure-connector to be called multiple times for
all types of DR connectors.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Corrected buglet that would have initialized fdt pointers ready
for reading on a device not present at reset]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The unicast case in h_signal_sys_reset() seems to be broken:
rather than selecting the target CPU, it looks like it will pick
either the first CPU or fail to find one at all.
Fix it by using the search function rather than open coding the
search.
This was found by inspection; the code appears to be unused because
the Linux kernel only uses the broadcast target.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
object_property_add_child() can only fail in two cases:
- the child already has a parent, which shouldn't happen since the DRC was
allocated a few lines above
- the parent already has a child with the same name, which would mean the
caller tries to create a DRC that already exists
In both case, this is a QEMU bug and we should abort.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit b87680427e.
I thought this was a harmless preliminary for XIVE enablement patches
we expect later on. However, due to some subtle interactions between
qemu and SLOF (guest firmware) this breaks some things. Revert it for
now, we'll work out how to fix it when the rest of the XIVE patches
are ready.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If object_property_add_alias() returns an error in realize(), we should
propagate it to the caller and certainly not unref the DRC.
Same thing goes for unrealize(). Since object_property_del() is the last
call, we can even get rid of the intermediate Error *.
And finally, unrealize() should undo all registrations performed by
realize().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 0cffce56 (hw/ppc/spapr.c: adding pending_dimm_unplugs to
sPAPRMachineState) introduced a new way to track pending LMBs of DIMM
device that is marked for removal. Since this commit we can hit the
assert in spapr_pending_dimm_unplugs_add() in the following situation:
- DIMM device removal fails as the guest doesn't allow the removal.
- Subsequent attempt to remove the same DIMM would hit the assert
as the corresponding sPAPRDIMMState is still part of the
pending_dimm_unplugs list.
Fix this by removing the assert and conditionally adding the
sPAPRDIMMState to pending_dimm_unplugs list only when it is not
already present.
Fixes: 0cffce56ae
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Tweaked to avoid returning NULL when spapr_pending_dimm_unplugs_add()
does find an existing entry]
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 3a38429 ("spapr: Add a "no HPT" encoding to HTAB migration stream")
allows to migrate an empty HPT, but doesn't mark correctly the
end of the migration stream.
The end condition (value returned by htab_save_iterate())
should be 1, whereas in 3a38429 it returns 0.
The problem can be reproduced with QEMU monitor command "savevm":
the command never stops and the disk image grows without limit.
Fixes: 3a38429748
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
f1c2dc7c86 "spapr-pci: rework MSI/MSIX" (07/2013) changed MSIX encoding
but forgot to change the comment so this changes it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
-----BEGIN PGP SIGNATURE-----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=O6NQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170717' into staging
ppc patch queue 2017-07-17
This pull requests supersedes the one from 2017-07-14. That one had a
couple of subtle regressions: there was a build error for mingw32, and
an instance_size which was theoretically wrong everywhere, but only
actually bit on the Travis OSX build.
There are two major batches in this set, rather than the usual
collection of assorted fixes.
* More DRC cleanup. This gets the state management into a state
which should fix many of the hotplug+migration problems we've
had. Plus it gets the migration stream format into something
well defined and pretty minimal which we can reasonably support
into the future.
* Hashed Page Table resizing. It's been a while since this was
posted, but it's been through several previous rounds of review.
The kernel parts (both guest and host) are merged in 4.11, so
this is the only remaining piece left to allow resizing of the
HPT in a running guest.
There are also a handful of unrelated fixes.
# gpg: Signature made Mon 17 Jul 2017 07:36:52 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170717: (21 commits)
target/ppc: fix CPU hotplug when radix is enabled (TCG)
spapr: fix memory leak in spapr_core_pre_plug()
pseries: Allow HPT resizing with KVM
pseries: Use smaller default hash page tables when guest can resize
pseries: Enable HPT resizing for 2.10
pseries: Implement HPT resizing
pseries: Stubs for HPT resizing
ppc/pnv: Remove unused XICSState reference
spapr: fix potential memory leak in spapr_core_plug()
spapr: Implement DR-indicator for physical DRCs only
spapr: Remove sPAPRConfigureConnectorState sub-structure
spapr: Consolidate DRC state variables
spapr: Cleanups relating to DRC awaiting_release field
spapr: Refactor spapr_drc_detach()
spapr: Abort on delete failure in spapr_drc_release()
spapr: Simplify unplug path
spapr: Remove 'awaiting_allocation' DRC flag
spapr: Treat devices added before inbound migration as coldplugged
spapr: Minor cleanups to events handling
spapr: migrate pending_events of spapr state
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In case of error, we must ensure the dynamically allocated base_core_type
is freed, like it is done everywhere else in this function.
This is a regression introduced in QEMU 2.9 by commit 8149e2992f.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
So far, qemu implements the PAPR Hash Page Table (HPT) resizing extension
with TCG. The same implementation will work with KVM PR, but we don't
currently allow that. For KVM HV we can only implement resizing with the
assistance of the host kernel, which needs a new capability and ioctl()s.
This patch adds support for testing the new KVM capability and implementing
the resize in terms of KVM facilities when necessary. If we're running on
a kernel which doesn't have the new capability flag at all, we fall back to
testing for PR vs. HV KVM using the same hack that we already use in a
number of places for older kernels.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've now implemented a PAPR extension allowing PAPR guest to resize
their hash page table (HPT) during runtime.
This patch makes use of that facility to allocate smaller HPTs by default.
Specifically when a guest is aware of the HPT resize facility, qemu sizes
the HPT to the initial memory size, rather than the maximum memory size on
the assumption that the guest will resize its HPT if necessary for hot
plugged memory.
When the initial memory size is much smaller than the maximum memory size
(a common configuration with e.g. oVirt / RHEV) then this can save
significant memory on the HPT.
If the guest does *not* advertise HPT resize awareness when it makes the
ibm,client-architecture-support call, qemu resizes the HPT for maxmimum
memory size (unless it's been configured not to allow such guests at all).
For now we make that reallocation assuming the guest has not yet used the
HPT at all. That's true in practice, but not, strictly, an architectural
or PAPR requirement. If we need to in future we can fix this by having
the client-architecture-support call reboot the guest with the revised
HPT size (the client-architecture-support call is explicitly permitted to
trigger a reboot in this way).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
We've now implemented a PAPR extensions which allows PAPR guests (i.e.
"pseries" machine type) to resize their hash page table during runtime.
However, that extension is only enabled if explicitly chosen on the
command line. This patch enables it by default for spapr-2.10, but leaves
it disabled (by default) for older machine types.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
This patch implements hypercalls allowing a PAPR guest to resize its own
hash page table. This will eventually allow for more flexible memory
hotplug.
The implementation is partially asynchronous, handled in a special thread
running the hpt_prepare_thread() function. The state of a pending resize
is stored in SPAPR_MACHINE->pending_hpt.
The H_RESIZE_HPT_PREPARE hypercall will kick off creation of a new HPT, or,
if one is already in progress, monitor it for completion. If there is an
existing HPT resize in progress that doesn't match the size specified in
the call, it will cancel it, replacing it with a new one matching the
given size.
The H_RESIZE_HPT_COMMIT completes transition to a resized HPT, and can only
be called successfully once H_RESIZE_HPT_PREPARE has successfully
completed initialization of a new HPT. The guest must ensure that there
are no concurrent accesses to the existing HPT while this is called (this
effectively means stop_machine() for Linux guests).
For now H_RESIZE_HPT_COMMIT goes through the whole old HPT, rehashing each
HPTE into the new HPT. This can have quite high latency, but it seems to
be of the order of typical migration downtime latencies for HPTs of size
up to ~2GiB (which would be used in a 256GiB guest).
In future we probably want to move more of the rehashing to the "prepare"
phase, by having H_ENTER and other hcalls update both current and
pending HPTs. That's a project for another day, but should be possible
without any changes to the guest interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces stub implementations of the H_RESIZE_HPT_PREPARE and
H_RESIZE_HPT_COMMIT hypercalls which we hope to add in a PAPR
extension to allow run time resizing of a guest's hash page table. It
also adds a new machine property for controlling whether this new
facility is available.
For now we only allow resizing with TCG, allowing it with KVM will require
kernel changes as well.
Finally, it adds a new string to the hypertas property in the device
tree, advertising to the guest the availability of the HPT resizing
hypercalls. This is a tentative suggested value, and would need to be
standardized by PAPR before being merged.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Sam Bobroff
Igor Mammedov
Greg Kurz
Thomas Huth
BALATON Zoltan
Alexey Kardashevskiy
Michael Roth
Daniel Henrique Barboza
Bharata B Rao
Vladimir Sementsov-Ogievskiy
Philippe Mathieu-Daudé
David Gibson
Laurent Vivier
Markus Armbruster
Peter Maydell