This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).
Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds wrappers for easy creation of the qdev devices.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's simple UART.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's System Controller core. The model
has the following features:
- support for shutting down and restarting the board
- provide two timers and GPIO
- provide registers for system identification and reading the boards
capabilities
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's memory card core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch enables the instruction disassembler when using an
S390x target.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 6b331efb73 broke the s390 proxy version
of virtio-serial by only taking its PCI brother into account.
So let's adjust s390-virtio-serial the same way as its PCI counterpart, making
it compile and work again.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
During Jan's rework of the generic KVM layer, he added some more error checks
and actually aborted if something went wrong. Unfortunately, one of the s390
internal error codes slipped through, aborting the VM without needing to.
This patch fixes booting of S390x virtual machines in KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have two different virtio buses: pci and s390. The abstraction path
taken in qemu is to have generic aliases for each device type in the
architecture specific qdev devices.
So let's make use of these aliases whenever we can and define them
whenever we can.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ivshmem depends on PCI and KVM, not only KVM. Reflect this
in the Makefile, so we don't get build errors on s390x.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Cam Macdonell <cam@cs.ualberta.ca>
CC: Juan Quintela <quintela@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
arpa/inet.h is not available for w32, so commit
edbb21363f breaks
w32 compilations.
This is fixed by using qemu_socket.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SDL library initialization mangles signal handlers, so QEMU should
register them after initializing SDL. This was the case before and code
even have a comment about that. Fix it to be so again.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tidy up the message printed when qemu exits due to a signal, so that
it's clearer where the message is coming from and that it's not just
stray debug output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The common checksum functions were moved to net/checksum.c in commit
7200ac3c7c but the original net-checksum.c
was never deleted from the source tree. Remove it now since all users
of the checksum functions link against net/checksum.o and net-checksum.c
is not even compiled anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Rx and Tx descriptors are 16 byte aligned, so the lower bits are
ignored by real hardware. In fact, they always read back as zero on real
hardware, but probably nobody relies on that.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the VM goes into stop state while there is a gdb frontend attached,
it makes sense to inform gdb about this fact and at least a bit about
the stop reason. Basically, all stops are interesting except for the
temporary VMSTOP_SAVE/LOADVM.
The patch maps the relevant VMSTOP reasons on unique and more or less
associatable signals that gdb understands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These errors were reported by cppcheck:
tests/cris/check_openpf1.c:30: error:
Mismatching allocation and deallocation: f
tests/cris/check_openpf2.c:13: error:
Mismatching allocation and deallocation: f
tests/cris/check_stat3.c:16: error:
Buffer overrun possible for long cmd-line args
tests/cris/check_stat4.c:18: error:
Buffer overrun possible for long cmd-line args
The first two are obvious coding errors (fopen needs fclose, not close).
The last two may seem less important (nobody will start test code
with an argument of more than 1022 characters which raises a buffer
overrun). Fixing them nevertheless helps with static code checks
like those done by cppcheck.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a model of the ARM Versatile Express board (with A9MPx4
daughterboard).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the argument and return types for the float<->int conversion helper
functions so that integer arguments and return values are declared as
uint32_t/uint64_t, not float32/float64. This allows us to remove the
hand-rolled functions which were doing bitwise copies between the types
via unions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new softfloat min/max functions to implement the Neon VMAX
and VMIN instructions. This allows us to get the right behaviour
for NaN and negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add min and max operations to softfloat. This allows us to implement
propagation of NaNs and handling of negative zero correctly (unlike
the approach of having target helper routines return one of the operands
based on the result of a comparison op).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement ABD by taking the absolute value of the difference
of the operands (as the ARM ARM specifies) rather than by
flipping the order of the operands to the subtract based
on the results of a comparison. The latter approch gives
the wrong answers for some edge cases like negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implementing the floating-point versions of VCLE #0 and VCLT #0 by
doing a GT comparison and inverting the result gives the wrong
result if the input is a NaN. Implement as a GT comparison with the
operands swapped instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the helper functions implementing the Neon floating point comparison
ops (VCGE, VCGT, VCEQ, VACGT, VACGE) to return the right answer when
one of the values being compared is a NaN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the softfloat make_float32 and float32_val macros to convert between
softfloat's float32 type and raw uint32_t types, rather than private
conversion functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add documentation for the usb-ccid device and accompanying two card
devices, ccid-card-emulated and ccid-card-passthru.
Signed-off-by: Alon Levy <alevy@redhat.com>
This devices uses libcacard (internal) to emulate a smartcard conforming
to the CAC standard. It attaches to the usb-ccid bus. Usage instructions
(example command lines) are in the following patch in docs/ccid.txt. It
uses libcacard which uses nss, so it can work with both hw cards and
certificates (files).
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetics
* use qemu-thread and qemu_malloc/qemu_free
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* add qdev.desc
* backend: drop the enumeration property, back to using a string one.
changes from v16->v17:
* use PROP_TYPE_ENUM for backend
changes from v15->v16:
* fix error reporting in initfn
* bump copyright year
* update copyright license
changes from v1:
* remove stale comments, use only c-style comments
* bugfix, forgot to set recv_len
* change reader name to 'Virtual Reader'
client to talk to ccid-card-passthru and use smartcard on client to
perform actual operations.
v23->v24 changes: (Jes Sorensen review 2)
* use qemu_socket instead of socket
* use fprintf(stderr,..) for errors
* remove unneccessary includes since using qemu_common.h
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
The passthru ccid card is a device sitting on the usb-ccid bus and
using a chardevice to communicate with a remote device using the
VSCard protocol defined in libcacard/vscard_common.h
Usage docs available in following patch in docs/ccid.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
Changes from v23->v24:
* fixed double license line in header.
Changes from v20->v21: (Jes Sorensen review)
* add reference to COPYING in header
* long comment reformatting
Changes from v19->v20:
* checkpatch.pl
Changes from v18->v19:
* add qdev.desc
* remove .qdev.unplug (no hot unplug support for ccid bus)
Changes from v16->v17:
* fix wrong cast when receiving VSC_Error
* ccid-card-passthru: force chardev user wakeup by sending Init
see lengthy comment below.
Changes from v15->v16:
Behavioral changes:
* return correct size
* return error instead of assert if client sent too large ATR
* don't assert if client sent too large a size, but add asserts for indices to buffer
* reset vscard_in indices on chardev disconnect
* handle init from client
* error if no chardev supplied
* use ntoh, hton
* eradicate reader_id_t
* remove Reconnect usage (removed from VSCARD protocol)
* send VSC_SUCCESS on card insert/remove and reader add/remove
Style fixes:
* width of line fix
* update copyright
* remove old TODO's
* update file header comment
* use macros for debug levels
* c++ style comment replacement
* update copyright license
* fix ATR size comment
* fix whitespace in struct def
* fix DPRINTF prefix
* line width fix
ccid-card-passthru: force chardev user wakeup by sending Init
The problem: how to wakeup the user of the smartcard when the smartcard
device is initialized?
Long term solution: have a callback interface. This was done via
the deprecated so called chardev ioctl interface.
Short term solution: do a write. Specifically we write an Init message.
And we change the client to send it's own Init message regardless of
receiving this one. Additional Init messages will be regarded as
acceptable, the first one received after connection establishment is
the determining one wrt capabilities.
A CCID device is a smart card reader. It is a USB device, defined at [1].
This patch introduces the usb-ccid device that is a ccid bus. Next patches will
introduce two card types to use it, a passthru card and an emulated card.
[1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetic changes - fix multi line comments.
* reorder fields in USBCCIDState
* add reference to COPYING
* add --enable-smartcard and --disable-smartcard here (moved
from last patch)
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* merged: ccid.h: add copyright, fix define and remove non C89 comments
* add qdev.desc
changes from v15->v16:
Behavioral changes:
* fix abort on client answer after card remove
* enable migration
* remove side affect code from asserts
* return consistent self-powered state
* mask out reserved bits in ccid_set_parameters
* add missing abRFU in SetParameters (no affect on linux guest)
whitefixes / comments / consts defines:
* remove stale comment
* remove ccid_print_pending_answers if no DEBUG_CCID
* replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines
* use error_report
* update copyright (most of the code is not original)
* reword known bug comment
* add missing closing quote in comment
* add missing whitespace on one line
* s/CCID_SetParameter/CCID_SetParameters/
* add comments
* use define for max packet size
Comment for "return consistent self-powered state":
the Configuration Descriptor bmAttributes claims we are self powered,
but we were returning not self powered to USB_REQ_GET_STATUS control message.
In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64
guest (not tested on other guests), unless you issue lsusb -v as root (for
example).
qemu-thread.h relies on uint64_t being defined, but doesn't include
inttypes.h explicitly. This makes it easier to use it from vscclient (part
of libcacard).
Improve the warnings we give if the user specified a combination of -net
options which don't make much sense:
* Don't warn about anything if the config is the implicit default
"-net user -net nic" rather than one specified by the user (this will
only kick in for boards with no NIC or if CONFIG_SLIRP is not set)
* Diagnose the case where the user asked for NICs which the board
didn't instantiate (for example where the user asked for two NICs
but the board only supports one)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the condition determining whether we instantiate the onboard
NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken
in two ways:
(1) if the user asked for two default NICs ("-net nic -net nic") we would
crash trying to strcmp() a NULL pointer
(2) if the user asked for two NICs explicitly of the same model as the
onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111")
we would try to instantiate two onboard NICs at the same address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
