When running the test in slow mode on a very loaded system with the
arm/aarch64 target and with --enable-debug, it can take longer than
10 minutes to finish the introspection test. Bump the timeout to twelve
minutes to make sure that it also finishes in such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-13-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is reliably hitting the current 2 minute timeout in GitLab CI,
and for the TCI job, it even hits a 6 minute timeout.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-12-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-12-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
On a loaded system with --enable-debug, this test can take longer than
5 minutes. Raising the timeout to 6 minutes gives greater headroom for
such situations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Increase the timeout to 6 minutes for very loaded systems]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-11-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qos-test takes just under 1 minute in a --enable-debug
build. Bumping to 2 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-10-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-10-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The boot-serial-test takes about 1 + 1/2 minutes in a --enable-debug
build. Bumping to 3 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-9-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-9-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The prom-env-test can take more than 5 minutes in a --enable-debug
build on a loaded system. Bumping to 6 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 6 minutes instead of 3]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-8-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The pxe-test uses the boot_sector_test() function, and that already
uses a timeout of 600 seconds. So adjust the timeout on the meson
side accordingly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Bump timeout to 600s and adjust commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The hmp test takes just under 3 minutes in a --enable-debug
build. Bumping to 4 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-6-berrange@redhat.com>
[thuth: fix copy-n-paste error in the description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-6-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The npcm7xx_pwm-test takes 3 & 1/2 minutes in a --enable-debug build.
Bumping to 5 minutes will give more headroom.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230717182859.707658-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-5-thuth@redhat.com>
[AJB: s/pwn/pwm]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The qom-test is periodically hitting the 5 minute timeout when running
on the aarch64 emulator under GitLab CI. With an --enable-debug build
it can take over 10 minutes for arm/aarch64 targets. Setting timeout
to 15 minutes gives enough headroom to hopefully make it reliable.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The migration test should take between 1 min 30 and 2 mins on reasonably
modern hardware. The test is not especially compute bound, rather its
running time is dominated by the guest RAM size relative to the
bandwidth cap, which forces each iteration to take at least 30 seconds.
None the less under high load conditions with multiple QEMU processes
spawned and competing with other parallel tests, the worst case running
time might be somewhat extended. Bumping the timeout to 8 minutes gives
us good headroom, while still catching stuck tests relatively quickly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-3-berrange@redhat.com>
[thuth: Bump timeout to 8 minutes to make it work on very loaded systems, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Even some of the relatively fast qtests can sometimes hit the 30 second
timeout in GitLab CI under high parallelism/load conditions. Bump the
min to 60 seconds to give a higher margin for reliability.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230717182859.707658-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-2-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The function qemu_chr_fe_init already treats be->fe_open as a bool and
if it acts like a bool it should be one. While we are at it make the
variable name more descriptive and add kdoc decorations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211145959.93759-1-alex.bennee@linaro.org>
This reverts aeb5f8f248 (gitlab: build the correct microblaze target)
now we actually have a little-endian test in avocado thanks to this
years advent calendar.
Message-Id: <20240103173349.398526-4-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This ensures the rootfs is never permanently changed as we don't need
persistence between tests anyway.
Message-Id: <20240103173349.398526-3-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We've already got a test for a big endian microblaze machine, but so
far we lack one for a little endian machine. Now that the QEMU advent
calendar featured such an image, we can test the little endian mode,
too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215161851.71508-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
-----BEGIN PGP SIGNATURE-----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=bcZj
-----END PGP SIGNATURE-----
Merge tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu into staging
edk2: update to git snapshot (maybe for-8.2)
This updates edk2 to git master as of today. This picks up a patch
(merged only yesterday, that's why this last-minute PR) which allows to
work around a bug in shim, and enables that workaround in the qemu
firmware builds.
This solves a real-world problem on arm hardware, walk over to
https://gitlab.com/qemu-project/qemu/-/issues/1990 to see the details.
Merging this firmware update that close to the 8.2 release clearly is
not without risks. If I get a 'no', I'm not going to complain.
That said I'm not aware of any bugs, and landing this in 8.2.0 would
make a bunch of folks hanging around in issue 1990 very happy.
Alternative plan would be to merge this after the release, give it some
time for testing, and assuming everything goes well schedule a backport
for 8.2.1
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmV5i70ACgkQTLbY7tPo
# cTg5mA//VDjGNmBYWhIhf5c7Z8+h1FspnqkxqResX3KgE2indCWkTlyZnCFGb7CO
# NgDiCR7xKMw9S1Cun14vTs/OK8BVFvmXGhTIgjecK+k6w6D8PtR4QvfXYUKxNajA
# Sd6reWAlojlgKOkpcrejrSSvtBTZqrJc8CrkowMR3FZXzD0GstUCMZ0jBvVhzlO6
# o9RMk0kbf+VNupsA+v9ZWPstMHXjLKs8v1eUqrc6LYOanY6mqQM5Wz9yWteUfrNp
# /0zShBrkmB+BgPoRQypphFdXRacP82fVXDMeTSbbXaReI0PR9MLKZnyk0UUkES6k
# BTtEVEM0cCAYLGaGFjHZVEpbrtFmVBisE0fLgdozsCU8SMCuxjNzXyj0HGRsJ7m4
# UQ+qGJLOR3Zx/Bnz3LLKOmWBlq6MQD5lYgxk3dwSPKzXTqun1ndlVKenJ3Z9fgXQ
# gibVbS/2fNylR9aoPSYkXnlE8l8vSo24sXIn8R2wX8rJ0xBc6bFDs1MKizzv2b9l
# YUeybDwgDvbbDLGSN4DgIeNSZxQBgNO/nmuFnx8jNxTqcNlCJFHO2jR7gPijj5ct
# ZPQQwLCCEIxD3OY3Dg94zXDm1EfWZQpNBFDD/83joJt/15Vu9GLsPqEs4QUdiQsp
# MO4Bd7HFavLSGsyX1rMe0yonWirbRX2uKYmyc+KwGjjS9LRGesU=
# =bcZj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 13 Dec 2023 10:47:25 GMT
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* tag 'firmware/edk2-20231213-pull-request' of https://gitlab.com/kraxel/qemu:
tests/acpi: disallow tests/data/acpi/virt/SSDT.memhp changes
tests/acpi: update expected data files
edk2: update binaries to git snapshot
edk2: update build config, set PcdUninstallMemAttrProtocol = TRUE.
edk2: update to git snapshot
tests/acpi: allow tests/data/acpi/virt/SSDT.memhp changes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZ/QKgAKCRBAov/yOSY+
34eqBADA48++Z9gETFNheLUHdYEaja2emn+gSaoHLFquyq/l53w8RfrUII+BzV1o
T7D8xjlVQldAYZzqQn2pQe2S7r4ggfeNmxGxwJbCTW9sooGMwBnU8+Ix3ruSet7K
gI+UHLU4oHk6jdrT384tux2EG+qUmlLN1c7j4G/z1OzKEwFv7Q==
=+Pi0
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20240111' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20240111
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZZ/QKgAKCRBAov/yOSY+
# 34eqBADA48++Z9gETFNheLUHdYEaja2emn+gSaoHLFquyq/l53w8RfrUII+BzV1o
# T7D8xjlVQldAYZzqQn2pQe2S7r4ggfeNmxGxwJbCTW9sooGMwBnU8+Ix3ruSet7K
# gI+UHLU4oHk6jdrT384tux2EG+qUmlLN1c7j4G/z1OzKEwFv7Q==
# =+Pi0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 Jan 2024 11:25:30 GMT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20240111' of https://gitlab.com/gaosong/qemu:
hw/intc/loongarch_extioi: Add vmstate post_load support
hw/intc/loongarch_extioi: Add dynamic cpu number support
hw/loongarch/virt: Set iocsr address space per-board rather than percpu
hw/intc/loongarch_ipi: Use MemTxAttrs interface for ipi ops
target/loongarch: Add loongarch kvm into meson build
target/loongarch: Implement set vcpu intr for kvm
target/loongarch: Restrict TCG-specific code
target/loongarch: Implement kvm_arch_handle_exit
target/loongarch: Implement kvm_arch_init_vcpu
target/loongarch: Implement kvm_arch_init function
target/loongarch: Implement kvm get/set registers
target/loongarch: Supplement vcpu env initial when vcpu reset
target/loongarch: Define some kvm_arch interfaces
linux-headers: Synchronize linux headers from linux v6.7.0-rc8
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are elements sw_ipmap and sw_coremap, which is usd to speed
up irq injection flow. They are saved and restored in vmstate during
migration, indeed they can calculated from hw registers. Here
post_load is added for get sw_ipmap and sw_coremap from extioi hw
state.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-5-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
On LoongArch physical machine, one extioi interrupt controller only
supports 4 cpus. With processor more than 4 cpus, there are multiple
extioi interrupt controllers; if interrupts need to be routed to
other cpus, they are forwarded from extioi node0 to other extioi nodes.
On virt machine model, there is simple extioi interrupt device model.
All cpus can access register of extioi interrupt controller, however
interrupt can only be route to 4 vcpu for compatible with old kernel.
This patch adds dynamic cpu number support about extioi interrupt.
With old kernel legacy extioi model is used, however kernel can detect
and choose new route method in future, so that interrupt can be routed to
all vcpus.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
LoongArch system has iocsr address space, most iocsr registers are
per-board, however some iocsr register spaces banked for percpu such
as ipi mailbox and extioi interrupt status. For banked iocsr space,
each cpu has the same iocsr space, but separate data.
This patch changes iocsr address space per-board rather percpu,
for iocsr registers specified for cpu, MemTxAttrs.requester_id
can be parsed for the cpu. With this patches, the total address space
on board will be simple, only iocsr address space and system memory,
rather than the number of cpu and system memory.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
There are two interface pairs for MemoryRegionOps, read/write and
read_with_attrs/write_with_attrs. The later is better for ipi device
emulation since initial cpu can be parsed from attrs.requester_id.
And requester_id can be overrided for IOCSR_IPI_SEND and mail_send
function when it is to forward message to another vcpu.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Add kvm.c into meson.build to compile it when kvm
is configed. Meanwhile in meson.build, we set the
kvm_targets to loongarch64-softmmu when the cpu is
loongarch. And fix the compiling error when config
is enable-kvm,disable-tcg.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-10-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement loongarch kvm set vcpu interrupt interface,
when a irq is set in vcpu, we use the KVM_INTERRUPT
ioctl to set intr into kvm.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240105075804.1228596-9-zhaotianrui@loongson.cn>
[PMD: Split from bigger patch, part 2]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240110094152.52138-2-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
In preparation of supporting KVM in the next commit.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20240105075804.1228596-9-zhaotianrui@loongson.cn>
[PMD: Split from bigger patch, part 1]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240110094152.52138-1-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement kvm_arch_handle_exit for loongarch. In this
function, the KVM_EXIT_LOONGARCH_IOCSR is handled,
we read or write the iocsr address space by the addr,
length and is_write argument in kvm_run.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-8-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement kvm_arch_init_vcpu interface for loongarch,
in this function, we register VM change state handler.
And when VM state changes to running, the counter value
should be put into kvm to keep consistent with kvm,
and when state change to stop, counter value should be
refreshed from kvm.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-7-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement the kvm_arch_init of loongarch, in the function, the
KVM_CAP_MP_STATE cap is checked by kvm ioctl.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-6-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Implement kvm_arch_get/set_registers interfaces, many regs
can be get/set in the function, such as core regs, csr regs,
fpu regs, mp state, etc.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Change-Id: Ia8fc48fe08b1768853f7729e77d37cdf270031e4
Message-Id: <20240105075804.1228596-5-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Supplement vcpu env initial when vcpu reset, including
init vcpu CSR_CPUID,CSR_TID to cpu->cpu_index. The two
regs will be used in kvm_get/set_csr_ioctl.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-4-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Define some functions in target/loongarch/kvm/kvm.c,
such as kvm_arch_put_registers, kvm_arch_get_registers
and kvm_arch_handle_exit, etc. which are needed by
kvm/kvm-all.c. Now the most functions has no content
and they will be implemented in the next patches.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-3-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Use the scripts/update-linux-headers.sh to synchronize linux
headers from linux v6.7.0-rc8. We mainly want to add the
loongarch linux headers and then add the loongarch kvm support
based on it.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240105075804.1228596-2-zhaotianrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
tcg/ppc: Use new registers for LQ destination
util: fix build with musl libc on ppc64le
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWfESodHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8OLQf/TnNOeBPGFVFRLycp
rRbLxFar/oRP0SfH7I1S09vKFH+mlb5JK5Er4DL9CmUxV596r9ZGiwC6RlowK8nD
INfC9Nnf3MgeyViDG41bA5oxiWom+XxbFtN4iVZo84CVDFEZFt0xjaq7d9Zhfj9J
xWWAlCr013MnhamjmEB2NKxQzLnIMhJs1JuhkAbThKsaPoDwHLSmIMSMJlRwrf27
Ey9blEt8GAOkd1iMA0xpw2vthNUfpCgZibg//CzqZevIq8pdxcieQ9ZjuxLjDM32
N3u3eaX9SyuLwj4682MYuHYIxpuZ+HkIkjmuIQBsBuG8d3EoDs+rr/9Jzi47f/nR
0btVug==
=rXXF
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240111' of https://gitlab.com/rth7680/qemu into staging
tcg/i386: Use more 8-bit immediate forms for add, sub, or, xor
tcg/ppc: Use new registers for LQ destination
util: fix build with musl libc on ppc64le
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmWfESodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8OLQf/TnNOeBPGFVFRLycp
# rRbLxFar/oRP0SfH7I1S09vKFH+mlb5JK5Er4DL9CmUxV596r9ZGiwC6RlowK8nD
# INfC9Nnf3MgeyViDG41bA5oxiWom+XxbFtN4iVZo84CVDFEZFt0xjaq7d9Zhfj9J
# xWWAlCr013MnhamjmEB2NKxQzLnIMhJs1JuhkAbThKsaPoDwHLSmIMSMJlRwrf27
# Ey9blEt8GAOkd1iMA0xpw2vthNUfpCgZibg//CzqZevIq8pdxcieQ9ZjuxLjDM32
# N3u3eaX9SyuLwj4682MYuHYIxpuZ+HkIkjmuIQBsBuG8d3EoDs+rr/9Jzi47f/nR
# 0btVug==
# =rXXF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 Jan 2024 21:50:34 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240111' of https://gitlab.com/rth7680/qemu:
util: fix build with musl libc on ppc64le
tcg/ppc: Use new registers for LQ destination
tcg/i386: use 8-bit OR or XOR for unsigned 8-bit immediates
tcg/i386: convert add/sub of 128 to sub/add of -128
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use PPC_FEATURE2_ISEL and PPC_FEATURE2_VEC_CRYPTO from linux headers
instead of the GNU specific PPC_FEATURE2_HAS_ISEL and
PPC_FEATURE2_HAS_VEC_CRYPTO. This fixes build with musl libc.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1861
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes: 63922f467a ("tcg/ppc: Replace HAVE_ISEL macro with a variable")
Fixes: 68f340d4cd ("tcg/ppc: Enable Altivec detection")
Message-Id: <20231219105236.7059-1-ncopa@alpinelinux.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
LQ has a constraint that RTp != RA, else SIGILL.
Therefore, force the destination of INDEX_op_qemu_*_ld128 to be a
new register pair, so that it cannot overlap the input address.
This requires new support in process_op_defs and tcg_reg_alloc_op.
Cc: qemu-stable@nongnu.org
Fixes: 526cd4ec01 ("tcg/ppc: Support 128-bit load/store")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240102013456.131846-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the case where OR or XOR has an 8-bit immediate between 128 and 255,
we can operate on a low-byte register and shorten the output by two or
three bytes (two if a prefix byte is needed for REX.B).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231228120524.70239-1-pbonzini@redhat.com>
[rth: Incorporate into switch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend the existing conditional that generates INC/DEC, to also swap an
ADD for a SUB and vice versa when the immediate is 128. This facilitates
using OPC_ARITH_EvIb instead of OPC_ARITH_EvIz.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231228120514.70205-1-pbonzini@redhat.com>
[rth: Use a switch on C]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Make vector whole-register move (vmv) depend on vtype register
* Fix th.dcache.cval1 priviledge check
* Don't allow write mstatus_vs without RVV
* Use hwaddr instead of target_ulong for RV32
* Fix machine IDs QOM getters\
* Fix KVM reg id sizes
* ACPI: Enable AIA, PLIC and update RHCT
* Fix the interrupts-extended property format of PLIC
* Add support for Zacas extension
* Add amocas.[w,d,q] instructions
* Document acpi parameter of virt machine
* RVA22 profiles support
* Remove group setting of KVM AIA if the machine only has 1 socket
* Add RVV CSRs to KVM
* sifive_u: Update S-mode U-Boot image build instructions
* Upgrade OpenSBI from v1.3.1 to v1.4
* pmp: Ignore writes when RW=01 and MML=0
* Assert that the CSR numbers will be correct
* Don't adjust vscause for exceptions
* Ensure mideleg is set correctly on reset
-----BEGIN PGP SIGNATURE-----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=5K9J
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Make vector whole-register move (vmv) depend on vtype register
* Fix th.dcache.cval1 priviledge check
* Don't allow write mstatus_vs without RVV
* Use hwaddr instead of target_ulong for RV32
* Fix machine IDs QOM getters\
* Fix KVM reg id sizes
* ACPI: Enable AIA, PLIC and update RHCT
* Fix the interrupts-extended property format of PLIC
* Add support for Zacas extension
* Add amocas.[w,d,q] instructions
* Document acpi parameter of virt machine
* RVA22 profiles support
* Remove group setting of KVM AIA if the machine only has 1 socket
* Add RVV CSRs to KVM
* sifive_u: Update S-mode U-Boot image build instructions
* Upgrade OpenSBI from v1.3.1 to v1.4
* pmp: Ignore writes when RW=01 and MML=0
* Assert that the CSR numbers will be correct
* Don't adjust vscause for exceptions
* Ensure mideleg is set correctly on reset
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmWeW8kACgkQr3yVEwxT
# gBMB3BAAtpb7dC/NqDOjo/LjGf81wYUnF0KcfJUIbuHEM9S03mKJEvngV/sUhg+A
# fzsoJazijQZk2+Y02WLT/o+ppRDegb4P6n54Nn13xr024Dn2jf45+EKDLI+vtU5y
# lhwp/LH3SEo2MM/Qr0njl8+jJ7W9adhZeK6x+NFaLaQJ291xupbcwEnScdv2bPAo
# gvbM6yrfUoZ25MsQKIDGssozdGRwOD/keAT0q8C0gKDamqXBDrI80BOVhRms+uLm
# R33DXsAegPKluJTa9gfaWFI0eK34WHXRvSIjE36nZlGNNgqLAVdM2/QozMVz4cKA
# Ymz1nzqB9HeSn1pM4KCK/Y3LH89qLGWtyHYgldiDXA/wSyKajwkbXSWFOT9gPDqV
# i+5BRDvU0zIeMIt+ROqNKgx1Hry6U2aycMNsdHTmygJbGEpiTaXuES5tt+LKsyHe
# w/7a6wPd/kh9LQhXYQ4qbn7L534tWvn8zWyvKLZLxmYPcOn6SdjFbKWmk5ARky2W
# sx9ojn9ANlYaLfzQ3TMRcIhWD6n8Si3KFNiQ3353E8xkRkyfu0WHyXAy8/kIc5UT
# nScO2YD68XkdkcLF6uLUKuGiVZXFWXRY1Ttz9tvEmBckVsg6TIkoMONHeUWNP7ly
# A0bJwN5qEOk6XIYKHWwX5UzvkcfUpOb5VmuLuv3gRoNX0A7/+fc=
# =5K9J
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 Jan 2024 08:56:41 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240110' of https://github.com/alistair23/qemu: (65 commits)
target/riscv: Ensure mideleg is set correctly on reset
target/riscv: Don't adjust vscause for exceptions
target/riscv: Assert that the CSR numbers will be correct
target/riscv: pmp: Ignore writes when RW=01 and MML=0
roms/opensbi: Upgrade from v1.3.1 to v1.4
docs/system/riscv: sifive_u: Update S-mode U-Boot image build instructions
target/riscv/kvm: add RVV and Vector CSR regs
target/riscv/kvm: do PR_RISCV_V_SET_CONTROL during realize()
linux-headers: riscv: add ptrace.h
linux-headers: Update to Linux v6.7-rc5
target/riscv/kvm.c: remove group setting of KVM AIA if the machine only has 1 socket
target/riscv: add rva22s64 cpu
target/riscv: add RVA22S64 profile
target/riscv: add 'parent' in profile description
target/riscv: add satp_mode profile support
target/riscv/cpu.c: add riscv_cpu_is_32bit()
target/riscv/cpu.c: finalize satp_mode earlier
target/riscv: add priv ver restriction to profiles
target/riscv: implement svade
target/riscv: add 'rva22u64' CPU
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bits 10, 6, 2 and 12 of mideleg are read only 1 when the Hypervisor is
enabled. We currently only set them on accesses to mideleg, but they
aren't correctly set on reset. Let's ensure they are always the correct
value.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1617
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240108001328.280222-4-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have been incorrectly adjusting both the interrupt and exception
cause when using the hypervisor extension and trapping to VS-mode. This
patch changes the conditional to ensure we only adjust the cause for
interrupts and not exceptions.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1708
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240108001328.280222-3-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The CSRs will always be between either CSR_MHPMCOUNTER3 and
CSR_MHPMCOUNTER31 or CSR_MHPMCOUNTER3H and CSR_MHPMCOUNTER31H.
So although ctr_index can't be negative, Coverity doesn't know this and
it isn't obvious to human readers either. Let's add an assert to ensure
that Coverity knows the values will be within range.
To simplify the code let's also change the RV32 adjustment.
Fixes: Coverity CID 1523910
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240108001328.280222-2-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch changes behavior on writing RW=01 to pmpcfg with MML=0.
RWX filed is form of collective WARL with the combination of
pmpcfg.RW=01 remains reserved for future standard use.
According to definition of WARL writing the CSR has no other side
effect. But current implementation change architectural state and
change system behavior. After writing we will get unreadable-unwriteble
region regardless on the previous state.
On the other side WARL said that we should read legal value and nothing
says about what we should write. Current behavior change system state
regardless of whether we read this register or not.
Fixes: ac66f2f0 ("target/riscv: pmp: Ignore writes when RW=01")
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231220153205.11072-1-ivan.klokov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the documentation outlines the process for building the
S-mode U-Boot image using `make menuconfig` and manual actions within
the menuconfig UI. However, this approach is fragile due to Kconfig
options potentially changing across different releases. For example,
CONFIG_OF_PRIOR_STAGE has been replaced by CONFIG_BOARD since v2022.01
release, and CONFIG_TEXT_BASE has been moved to the 'General setup'
menu from the 'Boot options' menu in v2024.01 release.
This update aims to make the S-mode U-Boot image build instructions
future-proof. It leverages the 'config' script provided in the U-Boot
source tree to edit the .config file, followed by a `make olddefconfig`.
Validated with U-Boot v2024.01 release.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240104071523.273702-1-bmeng@tinylab.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for RVV and Vector CSR KVM regs vstart, vl and vtype.
Support for vregs[] requires KVM side changes and an extra reg (vlenb)
and will be added later.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Linux RISC-V vector documentation (Document/arch/riscv/vector.rst)
mandates a prctl() in order to allow an userspace thread to use the
Vector extension from the host.
This is something to be done in realize() time, after init(), when we
already decided whether we're using RVV or not. We don't have a
realize() callback for KVM yet, so add kvm_cpu_realize() and enable RVV
for the thread via PR_RISCV_V_SET_CONTROL.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM vector support for RISC-V requires the linux-header ptrace.h.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll add a new RISC-V linux-header file, but first let's update all
headers.
Headers for 'asm-loongarch' were added in this update.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
