... into new test_acpi_microvm_prepare helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-10-kraxel@redhat.com
Place the 64bit window at the top of the physical address space, assign
25% of the avaiable address space. Force cpu.host-phys-bits=on for
microvm machine typs so this actually works reliable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-7-kraxel@redhat.com
Uses the existing gpex device which is also used as pcie host bridge on
arm/aarch64. For now only a 32bit mmio window and no ioport support.
It is disabled by default, use "-machine microvm,pcie=on" to enable.
ACPI support must be enabled too because the bus is declared in the
DSDT table.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-6-kraxel@redhat.com
Add a comment with a table listing the IRQs,
both legacy pc and microvm side-by-side.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-5-kraxel@redhat.com
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
Add helper function to generate dsdt aml code for the gpex pci host.
Largely copied from arm/virt. Configuration is handled by passing
a config struct instead of looked up from memory map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-3-kraxel@redhat.com
It is defined twice already. Move to a common header file to
remove duplication and make it available to everybody.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
My last pull included a ton of useless files by mistake.
Drop them all.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9zFpQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpzlcIAKyBEfVbVhY0AsLbWn/tqL+fPhOTaioEaMX2
7beMIjK0vhmVDOhWtiSLZKbIVd1TMQu8jX2Gxuf1NJo5xIr3hJvEzT/FlpRR8m6u
TyNDWKmOGyUuOG1GYA6/KoQNDdlrabpzT1xVW1aQJ3tlOrUwqf+UJKvsu1JjkO27
ALu8j/MkJomxLuMEd4PhM34Sc6PuDlMKaSpxlRW6bKnviPTjV8tqXrW6ZHAYfWra
xrY0wApR2Wn0n3CWXHlZP/jk40xupV1zuyHzAb5vOrWSdh2VqKUGsxOv+wZLNmlW
qhWo9r6TNXv9BKYNXxLo8Skroncrkpym7s4drpWF1O1wPDG6DrI=
=rAKt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: fixup
My last pull included a ton of useless files by mistake.
Drop them all.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 12:12:20 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi: drop unnecessary files
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl9y3aEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpIgIH/2jGMi7hJ4CEs36pNdxaTfaTsX9IzlTv3/jb
ZuC3VV1PAdXyg0Z29QG0dzCkngN+D5ikC2KrBwUibKqBq6PqYie0dZYUYM5aEr/D
0v+afBBJkLtyOonLe3cG36D3cy7BeGpzXnNhm5muSl0+zaRutreWULMlF6sTmtMh
Vc/bp06IWdgj5eCp8cNzHItuzHtzXIrLsNuO2UDFPg/LFPl0gEcqXFDCB/9N6AfV
4D4XIXtWRd3umzQci0JNQUDDq5NTWnWaZDrK+6jeAhMfYFCYMxZqyT2AsEn636wm
H7klBm2Zs6gcLUX6on4RtALKyWAxRMWQenaJ4tjIB9QO2+7LsaE=
=3BXA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio,pc,acpi: fixes, tests
Fixes and tests all over the place.
Batch iommu updates for vdpa.
Removal of deprecated cpu hotplug commands.
SMBIOS OEM string support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 29 Sep 2020 08:09:21 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (48 commits)
libvhost-user: return on error in vu_log_queue_fill()
libvhost-user: return early on virtqueue errors
hw: virtio-pmem: detach the element fromt the virtqueue when error occurs
tests/acpi: update golden master DSDT binary table blobs for q35
piix4: don't reserve hw resources when hotplug is off globally
Add ACPI DSDT tables for q35 that are being updated by the next patch
tests/acpi: add newly added acpi DSDT table blob for pci bridge hotplug flag
tests/acpi: unit test for 'acpi-pci-hotplug-with-bridge-support' bridge flag
tests/acpi: list added acpi table binary file for pci bridge hotplug test
i440fx/acpi: do not add hotplug related amls for cold plugged bridges
Fix a gap where acpi_pcihp_find_hotplug_bus() returns a non-hotpluggable bus
tests/acpi: add a new ACPI table in order to test root pci hotplug on/off
tests/acpi: add new unit test to test hotplug off/on feature on the root pci bus
tests/acpi: mark addition of table DSDT.roothp for unit testing root pci hotplug
vhost-user: save features of multiqueues if chardev is closed
qemu-options: document SMBIOS type 11 settings
hw/smbios: report error if table size is too large
hw/smbios: support loading OEM strings values from a file
tests: acpi: update acpi blobs with new AML
x68: acpi: trigger SMI before sending hotplug Notify event to OSPM
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eW0Z
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200928a' into staging
Migration: Revert one patch for 068 fix
One patch in the last pull broke test 068 which
does a pair of vmload's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 28 Sep 2020 16:19:17 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200928a:
Revert "migration: Properly destroy variables on incoming side"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows to switch the (vga mode) framebuffer into bigendian mode
by setting the property, simliar to stdvga.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200928085335.21961-2-kraxel@redhat.com
With upcoming Spice server version 0.14.4, the monitor configuration can
contain additional fields for the monitor physical dimensions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduced in commit 9c956e6461 ("spice:
prepare for upcoming spice-server change"), the new logic never
materialized in the spice server source tree. Let's remove it for now,
until it actually changes in Spice.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-5-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following patch is going to introduce extra fields / details to
UIInfo. Add a getter and keep the current values, instead of memset(0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace dpi with width_mm/height_mm in qemu_edid_info.
Use it when set (non-zero) to compute the DPI and generate the EDID.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Divide the resolution by the DPI, and multiply to mm.
Note the computation done for edid[21/22] is correct (in cm).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200927145751.365446-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When resetting virtio-gpu, virgl_renderer_reset() should be
called to ensure that the virglrenderer status is correct.
Signed-off-by: Guoqing Zhang <zhangguoqing.kernel@bytedance.com>
Reviewed-by: Qi Liu<liuqi.16@bytedance.com>
Message-id: 20200918111632.37354-1-zhangguoqing.kernel@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-3-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vu_panic() is not guaranteed to exit the program. Return early when
errors are encountered.
Note that libvhost-user does not have an "unmap" operation for mapped
descriptors. Therefore it is correct to return without explicit cleanup.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200921113420.154378-2-stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If error occurs while processing the virtio request we should call
'virtqueue_detach_element' to detach the element from the virtqueue
before free the elem.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200813165125.59928-1-liq3ea@163.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device")
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cold plugged bridges are not hot unpluggable, even when their hotplug
property (acpi-pci-hotplug-with-bridge-support) is turned off. Please see
the function acpi_pcihp_pc_no_hotplug(). However, with
the current implementaton, Windows would try to hot-unplug a pci bridge when
it's hotplug switch is off. This is regardless of whether there are devices
attached to the bridge. This is because we add ACPI code like _EJ0 etc for the
pci slot where the bridge is cold plugged.
In this fix, we identify a cold plugged bridge and for cold plugged bridges,
we do not add the appropriate ACPI methods that are used by the OS
to identify a hot-pluggable/unpluggable pci device. After this change, Windows
does not detect the cold plugged pci bridge as ejectable.
As a result of the patch, the following are the changes to the DSDT ACPI
table:
@@ -858,38 +858,33 @@
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
Name (_ADR, 0x00030000) // _ADR: Address
- Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
- {
- PCEJ (BSEL, _SUN)
- }
}
Device (S20)
{
Name (_SUN, 0x04) // _SUN: Slot User Number
Name (_ADR, 0x00040000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Device (S28)
{
Name (_SUN, 0x05) // _SUN: Slot User Number
Name (_ADR, 0x00050000) // _ADR: Address
@@ -1148,37 +1143,32 @@
PCEJ (BSEL, _SUN)
}
}
Device (SF8)
{
Name (_SUN, 0x1F) // _SUN: Slot User Number
Name (_ADR, 0x001F0000) // _ADR: Address
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
}
Method (DVNT, 2, NotSerialized)
{
- If ((Arg0 & 0x08))
- {
- Notify (S18, Arg1)
- }
-
If ((Arg0 & 0x10))
{
Notify (S20, Arg1)
}
If ((Arg0 & 0x20))
{
Notify (S28, Arg1)
}
If ((Arg0 & 0x40))
{
Notify (S30, Arg1)
}
If ((Arg0 & 0x80))
While at it, I have also updated a stale comment.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Suggested-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").
As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:
outl 0xae10 0
outl 0xae08 your_slot
Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html
In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")
This change adds a unit test in order to test this feature.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")
This change documents the fact that this new file addition was made as a part
of the unit test change.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fore-commit(c6beefd674) only saves features of queue0,
this makes wrong features of other queues in multiqueues
situation.
For examples:
qemu-system-aarch64 ... \
-chardev socket,id=charnet0,path=/var/run/vhost_sock \
-netdev vhost-user,chardev=charnet0,queues=2,id=hostnet0 \
...
There are two queues in nic assocated with one chardev.
When chardev is reconnected, it is necessary to save and
restore features of all queues.
Signed-of-by: Haibin Zhang <haibinzhang@tencent.com>
Message-Id: <46CBC206-E0CA-4249-81CD-10F75DA30441@tencent.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-4-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The SMBIOS 2.1 entry point uses a uint16 data type for reporting the
total length of the tables. If the user passes -smbios configuration to
QEMU that causes the table size to exceed this limit then various bad
behaviours result, including
- firmware hangs in an infinite loop
- firmware triggers a KVM crash on bad memory access
- firmware silently discards user's SMBIOS data replacing it with
a generic data set.
Limiting the size to 0xffff in QEMU avoids triggering most of these
problems. There is a remaining bug in SeaBIOS which tries to prepend its
own data for table 0, and does not check whether there is sufficient
space before attempting this.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-3-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some applications want to pass quite large values for the OEM strings
entries. Rather than having huge strings on the command line, it would
be better to load them from a file, as supported with -fw_cfg.
This introduces the "path" parameter allowing for:
$ echo -n "thisthing" > mydata.txt
$ qemu-system-x86_64 \
-smbios type=11,value=something \
-smbios type=11,path=mydata.txt \
-smbios type=11,value=somemore \
...other args...
Now in the guest
$ dmidecode -t 11
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x0E00, DMI type 11, 5 bytes
OEM Strings
String 1: something
String 2: thisthing
String 3: somemore
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200923133804.2089190-2-berrange@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.
Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When CPU hotplug with SMI has been negotiated, describe the SMI
register block in the DSDT. Pass the ACPI name of the SMI control
register to build_cpus_aml(), so that CPU_SCAN_METHOD can access the
register in the next patch.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Translate the "CPU hotplug with SMI" feature bit, from the property
added in the last patch, to a dedicated boolean in AcpiPmInfo.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Expose the "smi_negotiated_features" field of ICH9LPCState as
a QOM property.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... to let tests pass until binary blobs are updated with new AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>