This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
While searching PC, always store the pc of a new instruction.
Instructions that didn't generate tcg code (such as nop) prevented the
next one to be referenced.
Based on patch for target-alpha, r6930.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6931 c046a42c-6fe2-441c-8c8c-71466251a162
Most 64 bit architectures I'm aware of support running 32 bit code
of the same architecture as well.
So x86_64 can run i386 code easily and ppc64 can run ppc code.
Unfortunately, the current checks are pretty strict. So you can only
load e.g. an x86_64 elf binary on qemu-system-x86_64, but no i386 one.
This can get really annoying. I first encountered this issue with
my multiboot patch, where qemu-system-x86_64 was unable to load an
i386 elf binary because the elf loader rejected it.
The same thing happened again on PPC64 now. The firmware we're loading
is a PPC32 elf binary, as it's shared with PPC32. But the platform is
PPC64.
Right now there is a hack for this in the ppc cpu.h definition, that
simply sets the type to PPC32 in system emulation mode. While that
works fine for the firmware, it's no good if you also want to load a
PPC64 kernel with -kernel.
So in order to solve this mess, I figured the easiest way is to make
the elf loader aware of platforms that are backwards compatible. For
now I was only sure that x86_64 does i386 and ppc64 does ppc32, but
maybe there are other combinations too.
This patch is a prerequisite for having a working -kernel option on
PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6855 c046a42c-6fe2-441c-8c8c-71466251a162
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
Altivec and SPE both have 34 registers in their register sets, not 35
with a missing register 32.
GDB would ask for register 32 of the Altivec (resp. SPE) registers and
the code would claim it had zero width. The QEMU GDB stub code would
then return an E14 to GDB, which would complain about not being sure
whether p packets were supported or not.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6769 c046a42c-6fe2-441c-8c8c-71466251a162
The 970 doesn't know BAT, so let's not search BATs there.
This was only in as a hack for OpenHackWare so it would
work on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6759 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970 CPUs have the SLB not memory backed, but inside the CPU.
This breaks bridge mode for 970 for now, but at least keeps us from
overwriting physical addresses 0x0 - 0x300, rendering our interrupt
handlers useless.
I put in a stub for bridge mode operation that could be enabled
easily, but for now it's safer to leave that off I guess (970fx doesn't
have bridge mode AFAIK).
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6757 c046a42c-6fe2-441c-8c8c-71466251a162
ctx->nx only got ORed, but never reset. So when one page in the
lifetime of the VM was ever NX, all later pages were too.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6755 c046a42c-6fe2-441c-8c8c-71466251a162
The current implementation masks some MSR bits from SRR1 as it is
given on rfi(d). This looks pretty wrong and breaks Altivec.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6754 c046a42c-6fe2-441c-8c8c-71466251a162
Mtfsf can have the L bit set, so all the register contents get stored
in FPSCR. Linux uses it, so let's implement it.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6753 c046a42c-6fe2-441c-8c8c-71466251a162
Real 970s enable MSR_SF on all interrupts. The current code didn't do
this until now, so let's activate it!
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6752 c046a42c-6fe2-441c-8c8c-71466251a162
Linux tries to access some SPRs on PPC64 boot. Let's just ignore those
for the 970fx for now to make it happy.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6751 c046a42c-6fe2-441c-8c8c-71466251a162
Linux uses tlbiel to flush TLB entries in PPC64 mode. This special TLB
flush opcode only flushes an entry for the CPU it runs on, not across
all CPUs in the system.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6749 c046a42c-6fe2-441c-8c8c-71466251a162
The current SLB/PTE code does not support large pages, which are
required by Linux, as it boots up with the kernel regions up as large.
This patch implements large page support, so we can run Linux.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6748 c046a42c-6fe2-441c-8c8c-71466251a162
In order to modify SLB entries on recent PPC64 machines, the slbmte
instruction is used.
This patch implements the slbmte instruction and makes the "bridge"
mode code use the slb set functions, so we can move the SLB into
the CPU struct later.
This is required for Linux to run on PPC64.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6747 c046a42c-6fe2-441c-8c8c-71466251a162
and process termination in legacy applications. Try to guess which we want
based on the presence of multiple threads.
Also implement locking when modifying the CPU list.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
- use ctz32 instead of ffs - 1
- small optimisation of mtcrf
- add the name of both opcodes
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6669 c046a42c-6fe2-441c-8c8c-71466251a162
This patch add an emulation of MPC8544DS board.
It can work on All E500 platforms.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162
A real 970 CPU starts up with HIOR=0xfff00000 and triggers a reset
exception, basically ending up at IP 0xfff001000.
Later on this HIOR has to be set to 0 by the firmware in order to
enable the OS to handle interrupts on its own.
This patch maps HIOR to exec_prefix, which does the same thing
internally in qemu already.
It replaces the previous patch that changed the 970 initialization
constants, as this is the clean solution to the same problem.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6656 c046a42c-6fe2-441c-8c8c-71466251a162
When the CPU is in little endian mode, it should load values from RAM
in byte swapped manner. This check is in all the ld and st functions,
but misspelled in gen_qemu_ld32s.
This patch fixes the misspelling and makes ppc64 Linux happier.
Signed-off-by: Alexander Graf <alex@csgraf.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6654 c046a42c-6fe2-441c-8c8c-71466251a162
The e500v1 chips only have single-precision floating point; don't say we
support the double-precision floating-point instructions on such chips.
Also add an e500v1 -cpu argument for a generic e500v1.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6576 c046a42c-6fe2-441c-8c8c-71466251a162
Single-precision and double-precision floating-point instructions should
be separated into their own categories, since some chips only support
single-precision instructions.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6575 c046a42c-6fe2-441c-8c8c-71466251a162
blueswir1
aurel32
pbrook
malc
aliguori