Commit Graph

1120 Commits

Author SHA1 Message Date
Leon Alrae d208ac0c2e target-mips: generate fences
Make use of memory barrier TCG opcode in MIPS front end.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-09-23 07:07:30 +01:00
André Draszik e9deaad8a5 target-mips: add 24KEc CPU definition
Define a new CPU definition supporting 24KEc cores, similar to
the existing 24Kc, but with added support for DSP instructions
and MIPS16e (and without FPU).

Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-23 07:07:29 +01:00
Richard Henderson 01ecaf438b tcg: Merge GETPC and GETRA
The return address argument to the softmmu template helpers was
confused.  In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL.  However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.

Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.

This makes GETPC and GETRA identical.  Remove GETRA as the lesser
used macro, replacing all uses with GETPC.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-16 08:12:11 -07:00
Leon Alrae 701074a6fc target-mips: fix EntryHi.EHINV being cleared on TLB exception
While implementing TLB invalidation feature we forgot to modify
part of code responsible for updating EntryHi during TLB exception.
Consequently EntryHi.EHINV is unexpectedly cleared on the exception.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-28 11:24:02 +01:00
Peter Xu 38d87493f3 kvm-irqchip: i386: add hook for add/remove virq
Adding two hooks to be notified when adding/removing msi routes. There
are two kinds of MSI routes:

- in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by
  vhost, vfio, etc.

- in kvm_irqchip_send_msi(): when sending direct MSI message, if
  direct MSI not allowed, we will first create one MSI route entry
  in the kernel, then trigger it.

This patch only hooks the first one (irqfd case). We do not need to
take care for the 2nd one, since it's only used by QEMU userspace
(kvm-apic) and the messages will always do in-time translation when
triggered. While we need to note them down for the 1st one, so that we
can notify the kernel when cache invalidation happens.

Also, we do not hook IOAPIC msi routes (we have explicit notifier for
IOAPIC to keep its cache updated). We only need to care about irqfd
users.

Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21 20:44:19 +03:00
Markus Armbruster 2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 07f5a25875 target-*: Clean up cpu.h header guards
Most of them use guard symbols like CPU_$target_H, but we also have
__MIPS_CPU_H__ and __TRICORE_CPU_H__.  They all upset
scripts/clean-header-guards.pl.

The script dislikes CPU_$target_H because they don't match their file
name (they should, to make guard collisions less likely).  The others
are reserved identifiers.

Clean them all up: use guard symbol $target_CPU_H for
target-$target/cpu.h.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Sergey Sorokin b35399bb4e Fix confusing argument names in some common functions
There are functions tlb_fill(), cpu_unaligned_access() and
do_unaligned_access() that are called with access type and mmu index
arguments. But these arguments are named 'is_write' and 'is_user' in their
declarations. The patches fix the arguments to avoid a confusion.

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1465907177-1399402-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12 13:06:08 +01:00
Leon Alrae cdc46fab07 target-mips: enable 10-bit ASIDs in I6400 CPU
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:21 +01:00
Paul Burton a0c8060841 target-mips: support CP0.Config4.AE bit
The read-only Config4.AE bit set denotes extended 10 bits ASID.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:20 +01:00
Paul Burton 2d72e7b047 target-mips: change ASID type to hold more than 8 bits
ASID currently has uint8_t type which is too small since some processors
support more than 8 bits ASID. Therefore change its type to uint16_t.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:19 +01:00
Paul Burton 6ec98bd7b6 target-mips: add ASID mask field and replace magic values
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:18 +01:00
Leon Alrae 8f95ad1c79 target-mips: replace MIPS64R6-generic with the real I6400 CPU model
MIPS64R6-generic gradually gets closer to I6400 CPU, feature-wise. Rename
it to make it clear which MIPS processor it is supposed to emulate.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:17 +01:00
Leon Alrae 89777fd10f target-mips: add exception base to MIPS CPU
Replace hardcoded 0xbfc00000 with exception_base which is initialized with
this default address so there is no functional change here.
However, it is now exposed and consequently it will be possible to modify
it from outside of the CPU.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12 09:10:14 +01:00
Peter Maydell 1ec20c2a3a * serial port fixes (Paolo)
* Q35 modeling improvements (Paolo, Vasily)
 * chardev cleanup improvements (Marc-André)
 * iscsi bugfix (Peter L.)
 * cpu_exec patch from multi-arch patches (Peter C.)
 * pci-assign tweak (Lin Ma)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXc+GeAAoJEL/70l94x66DtIAH/3+eUBqSxVJ3SMUxJep2Op07
 lIWqw1GHAdw1gWQDG4HzokKWrVVp/+NFYQjRFcNMfF8L+/Xm6hHAYc7Y4DMkDxSw
 zHX2BT93gPcaFJRz3Md8n2anzFHaWePx7LucPjaoas2OzrbVKXC8JT6n3GGnKQzZ
 0CxDoyW4keI4ZVAOy9SOKsLPxdSvG8uLvaZU98l/YS/TuiGzpv8IWcdHR+k1hua+
 FIenzj7jD9+JFoLEUWkU0pYs33J6yYKPiZn7HgGL9RNWKPFR88+CtMdYXgfOPo7z
 i05L9RTmL4SpahmStPN2r72MC0T0ub0czk/+qxBNms4r/2gBwaSyldmcTfAXM9o=
 =DA8v
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* serial port fixes (Paolo)
* Q35 modeling improvements (Paolo, Vasily)
* chardev cleanup improvements (Marc-André)
* iscsi bugfix (Peter L.)
* cpu_exec patch from multi-arch patches (Peter C.)
* pci-assign tweak (Lin Ma)

# gpg: Signature made Wed 29 Jun 2016 15:56:30 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (35 commits)
  socket: unlink unix socket on remove
  socket: add listen feature
  char: clean up remaining chardevs when leaving
  vhost-user: disable chardev handlers on close
  vhost-user-test: fix g_cond_wait_until compat implementation
  vl: smp_parse: fix regression
  ich9: implement SCI_IRQ_SEL register
  ich9: implement ACPI_EN register
  serial: reinstate watch after migration
  serial: remove watch on reset
  char: change qemu_chr_fe_add_watch to return unsigned
  serial: separate serial_xmit and serial_watch_cb
  serial: simplify tsr_retry reset
  serial: make tsr_retry unsigned
  iscsi: fix assertion in is_sector_request_lun_aligned
  target-*: Don't redefine cpu_exec()
  pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c
  vnc: generalize "VNC server running on ..." message
  scsi: esp: fix migration
  MC146818 RTC: add GPIO access to output IRQ
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29 19:14:48 +01:00
Peter Crosthwaite 8642c1b81e target-*: Don't redefine cpu_exec()
This function needs to be converted to QOM hook and virtualised for
multi-arch. This rename interferes, as cpu-qom will not have access
to the renaming causing name divergence. This rename doesn't really do
anything anyway so just delete it.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
2016-06-29 14:03:47 +02:00
Aleksandar Markovic 77be419980 target-mips: Add FCR31's FS bit definition
Add preprocessor definition of FCR31's FS bit, and update related
code for setting this bit.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:43:53 +01:00
Aleksandar Markovic 599bc5e89c target-mips: Implement FCR31's R/W bitmask and related functionalities
This patch implements read and write access rules for Mips floating
point control and status register (FCR31). The change can be divided
into following parts:

- Add fields that will keep FCR31's R/W bitmask in procesor
  definitions and processor float_status structure.

- Add appropriate value for FCR31's R/W bitmask for each supported
  processor.

- Add function for setting snan_bit_is_one, and integrate it in
  appropriate places.

- Modify handling of CTC1 (case 31) instruction to use FCR31's R/W
  bitmask.

- Modify handling user mode executables for Mips, in relation to the
  bit EF_MIPS_NAN2008 from ELF header, that is in turn related to
  reading and writing to FCR31.

- Modify gdb behavior in relation to FCR31.

Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:43:52 +01:00
Aleksandar Markovic 87552089b6 target-mips: Add nan2008 flavor of <CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D>
New set of helpers for handling nan2008-syle versions of instructions
<CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D>, for Mips R6.

All involved instructions have float operand and integer result. Their
core functionality is implemented via invocations of appropriate SoftFloat
functions. The problematic cases are when the operand is a NaN, and also
when the operand (float) is out of the range of the result.

Here one can distinguish three cases:

CASE MIPS-A: (FCR31.NAN2008 == 1)

   1. Operand is a NaN, result should be 0;
   2. Operand is larger than INT_MAX, result should be INT_MAX;
   3. Operand is smaller than INT_MIN, result should be INT_MIN.

CASE MIPS-B: (FCR31.NAN2008 == 0)

   1. Operand is a NaN, result should be INT_MAX;
   2. Operand is larger than INT_MAX, result should be INT_MAX;
   3. Operand is smaller than INT_MIN, result should be INT_MAX.

CASE SoftFloat:

   1. Operand is a NaN, result is INT_MAX;
   2. Operand is larger than INT_MAX, result is INT_MAX;
   3. Operand is smaller than INT_MIN, result is INT_MIN.

Current implementation of <CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D>
implements case MIPS-B. This patch relates to case MIPS-A. For case
MIPS-A, only return value for NaN-operands should be corrected after
appropriate SoftFloat library function is called.

Related MSA instructions FTRUNC_S and FTINT_S already handle well
all cases, in the fashion similar to the code from this patch.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
[leon.alrae@imgtec.com:
 * removed a statement from the description which caused slight confusion]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:47 +01:00
Aleksandar Markovic 6be7748005 target-mips: Add abs2008 flavor of <ABS|NEG>.<S|D>
Updated handling of instructions <ABS|NEG>.<S|D>. Note that legacy
(pre-abs2008) ABS and NEG instructions are arithmetic (and, therefore,
any NaN operand causes signaling invalid operation), while abs2008
ones are non-arithmetic, always and only changing the sign bit, even
for NaN-like operands. Details on these instructions are documented
in [1] p. 35 and 359.

Implementation-wise, abs2008 versions are implemented without helpers,
for simplicity and performance sake.

[1] "MIPS Architecture For Programmers Volume II-A:
    The MIPS64 Instruction Set Reference Manual",
    Imagination Technologies LTD, Revision 6.04, November 13, 2015

Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:46 +01:00
Aleksandar Markovic 40bd6dd456 target-mips: Activate IEEE 754-2008 signaling NaN bit meaning for MSA
Function msa_reset() is updated so that flag snan_bit_is_one is
properly set to 0.

By applying this patch, a number of incorrect MSA behaviors that
require IEEE 754-2008 compliance will be fixed. Those are behaviors
that (up to the moment of applying this patch) did not get the desired
functionality from SoftFloat library with respect to distinguishing
between quiet and signaling NaN, getting default NaN values (both
quiet and signaling), establishing if a floating point number is NaN
or not, etc.

Two examples:

* FMAX, FMIN will now correctly detect and propagate NaNs.
* FCLASS.D ans FCLASS.S will now correcty detect NaN flavors.

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:45 +01:00
Aleksandar Markovic af39bc8c49 softfloat: Implement run-time-configurable meaning of signaling NaN bit
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.

Background:

In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).

Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.

Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.

QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.

On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.

The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.

IMPORTANT:

This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.

Further break down of changes:

  1) Added field snan_bit_is_one to the structure float_status, and
     correspondent setter function set_snan_bit_is_one().

  2) Constants <float16|float32|float64|floatx80|float128>_default_nan
     (used both internally and externally) converted to functions
     <float16|float32|float64|floatx80|float128>_default_nan(float_status*).
     This is necessary since they are dependent on signaling bit meaning.
     At the same time, for the sake of code cleanup and simplicity, constants
     <floatx80|float128>_default_nan_<low|high> (used only internally within
     SoftFloat library) are removed, as not needed.

  3) Added a float_status* argument to SoftFloat library functions
     XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
     XXX_maybe_silence_nan(XXX a_). This argument must be present in
     order to enable correct invocation of new version of functions
     XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
     here)

  4) Updated code for all platforms to reflect changes in SoftFloat library.
     This change is twofolds: it includes modifications of SoftFloat library
     functions invocations, and an addition of invocation of function
     set_snan_bit_is_one() during CPU initialization, with arguments that
     are appropriate for each particular platform. It was established that
     all platforms zero their main CPU data structures, so snan_bit_is_one(0)
     in appropriate places is not added, as it is not needed.

[1] "IEEE Standard for Floating-Point Arithmetic",
    IEEE Computer Society, August 29, 2008.

Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
 * cherry-picked 2 chunks from patch #2 to fix compilation warnings]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:40:37 +01:00
Peter Maydell b0ad00b8c9 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
 EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
 G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
 sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
 5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
 j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
 =eUnF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request: (42 commits)
  trace: split out trace events for linux-user/ directory
  trace: split out trace events for qom/ directory
  trace: split out trace events for target-ppc/ directory
  trace: split out trace events for target-s390x/ directory
  trace: split out trace events for target-sparc/ directory
  trace: split out trace events for net/ directory
  trace: split out trace events for audio/ directory
  trace: split out trace events for ui/ directory
  trace: split out trace events for hw/alpha/ directory
  trace: split out trace events for hw/arm/ directory
  trace: split out trace events for hw/acpi/ directory
  trace: split out trace events for hw/vfio/ directory
  trace: split out trace events for hw/s390x/ directory
  trace: split out trace events for hw/pci/ directory
  trace: split out trace events for hw/ppc/ directory
  trace: split out trace events for hw/9pfs/ directory
  trace: split out trace events for hw/i386/ directory
  trace: split out trace events for hw/isa/ directory
  trace: split out trace events for hw/sd/ directory
  trace: split out trace events for hw/sparc/ directory
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20 22:30:34 +01:00
Eduardo Habkost 9be385980d coccinelle: Remove unnecessary variables for function return value
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.

Manual fixups:

* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
  "remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
  want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
  statements

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-20 16:38:13 +02:00
Lluís Vilanova 7c2550432a exec: [tcg] Track which vCPU is performing translation and execution
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.

The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20 15:30:01 +01:00
Paolo Bonzini 02d0e09503 os-posix: include sys/mman.h
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h.  Include it in
sysemu/os-posix.h and remove it from everywhere else.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-16 18:39:03 +02:00
Richard Henderson 4910e6e42e target-*: dfilter support for in_asm
The arm target was handled by 06486077, but other targets
were ignored.  This handles all the rest which actually support
disassembly (that is, skipping moxie and tilegx).

Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-06-05 09:26:24 -07:00
Paolo Bonzini 63c915526d cpu: move exec-all.h inclusion out of cpu.h
exec-all.h contains TCG-specific definitions.  It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.

One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini e6623d88f4 mips: move CP0 functions out of cpu.h
These are here for historical reasons: they are needed from both gdbstub.c
and op_helper.c, and the latter was compiled with fixed AREG0.  It is
not needed anymore, so uninline them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini 33c11879fd qemu-common: push cpu.h inclusion out of qemu-common.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:29 +02:00
Paolo Bonzini 1e00b8d57a hw: move CPU state serialization to migration/cpu.h
Remove usage of NEED_CPU_H from hw/hw.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Paolo Bonzini 416bf93686 target-mips: make cpu-qom.h not target specific
Make MIPSCPU an opaque type within cpu-qom.h, and move all definitions of
private methods, as well as all type definitions that require knowledge
of the layout to cpu.h.  This helps making files independent of NEED_CPU_H
if they only need to pass around CPU pointers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 13:08:05 +02:00
Stefan Weil cb8d4c8f54 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:27 +03:00
Peter Maydell 14fccfa91e MIPS patches 2016-05-13
Changes:
 * fix zeroing CP0.WatchLo registers in soft reset
 * QOMify Jazz led
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJXNaaUAAoJEFIRjjwLKdpre/sIAIhtHFxtzlNEBq27CG0Rsp2l
 7EN8O/NqVmhiq2NU5Xt6wJ100GjKftMM9f49aRhz05q7kgKIs+M0PC3RB2wvIYzQ
 lk4zbreiBdZYWA/m38SBSU2CJvEs+8FpthBtfNi/gN701lQ45K9oJdzl0jsURIh/
 /dLQhzPmHrf4NImQzxqybhX8ta80TUXLWOv/ZbuGEFEEXnp+db7+eajIw4kgqCT+
 J/XpqeFrZ/aJfT3Ag7LLsAimmTP439JIO1goIei8POvEXgkm1AmxpvIk6Aq1bGiz
 BnTm80lj5JSHImbObOu4WKIu8wRcWZb5rEIl2oMfnzAx6iPhRPOS8JNP+565Tes=
 =0B4r
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160513' into staging

MIPS patches 2016-05-13

Changes:
* fix zeroing CP0.WatchLo registers in soft reset
* QOMify Jazz led

# gpg: Signature made Fri 13 May 2016 11:04:04 BST using RSA key ID 0B29DA6B
# gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>"

* remotes/lalrae/tags/mips-20160513:
  hw/display: QOM'ify jazz_led.c
  target-mips: fix call to memset in soft reset code

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-13 11:50:42 +01:00
Sergey Fedorov 90aa39a1cc tcg: Allow goto_tb to any target PC in user mode
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.

Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12 14:06:42 -10:00
Emilio G. Cota 89fee74a0f tb: consistently use uint32_t for tb->flags
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.

Compile-tested for all targets.

Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
2016-05-12 14:06:40 -10:00
Aurelien Jarno 9d989c732b target-mips: fix call to memset in soft reset code
Recent versions of GCC report the following error when compiling
target-mips/helper.c:

  qemu/target-mips/helper.c:542:9: warning: ‘memset’ used with length
  equal to number of elements without multiplication by element size
  [-Wmemset-elt-size]

This is indeed correct and due to a wrong usage of sizeof(). Fix that.

Cc: Stefan Weil <sw@weilnetz.de>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: qemu-stable@nongnu.org
LP: https://bugs.launchpad.net/qemu/+bug/1577841
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-05-12 11:01:05 +01:00
James Hogan d96391c1ff target-mips: Fix RDHWR exception host PC
Commit b00c72180c ("target-mips: add PC, XNP reg numbers to RDHWR")
changed the rdhwr helpers to use check_hwrena() to check the register
being accessed is enabled in CP0_HWREna when used from user mode. If
that check fails an EXCP_RI exception is raised at the host PC
calculated with GETPC().

However check_hwrena() may not be fully inlined as the
do_raise_exception() part of it is common regardless of the arguments.
This causes GETPC() to calculate the address in the call in the helper
instead of the generated code calling the helper. No TB will be found
and the EPC reported with the resulting guest RI exception points to the
beginning of the TB instead of the RDHWR instruction.

We can't reliably force check_hwrena() to be inlined, and converting it
to a macro would be ugly, so instead pass the host PC in as an argument,
with each rdhwr helper passing GETPC(). This should avoid any dependence
on compiler behaviour, and in practice seems to ensure the full inlining
of check_hwrena() on x86_64.

This issue causes failures when running a MIPS KVM (trap & emulate)
guest in a MIPS QEMU TCG guest, as the inner guest kernel will do a
RDHWR of counter, which is disabled in the outer guest's CP0_HWREna by
KVM so it can emulate the inner guest's counter. The emulation fails and
the RI exception is passed to the inner guest.

Fixes: b00c72180c ("target-mips: add PC, XNP reg numbers to RDHWR")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-04-28 10:03:24 +01:00
Yongbok Kim f6d4dd8109 target-mips: add MAAR, MAARI register
The MAAR register is a read/write register included in Release 5
of the architecture that defines the accessibility attributes of
physical address regions. In particular, MAAR defines whether an
instruction fetch or data load can speculatively access a memory
region within the physical address bounds specified by MAAR.

As QEMU doesn't do speculative access, hence this patch only
provides ability to access the registers.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Yongbok Kim c98d3d79ee target-mips: use CP0_CHECK for gen_m{f|t}hc0
Reuse CP0_CHECK macro for gen_m{f|t}hc0.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae 0d74a222c2 target-mips: make ITC Configuration Tags accessible to the CPU
Add CP0.ErrCtl register with WST, SPR and ITC bits. In 34K and interAptiv
processors these bits are used to enable CACHE instruction access to
different arrays. When WST=0, SPR=0 and ITC=1 the CACHE instruction will
access ITC tag values.

Generally we do not model caches and we have been treating the CACHE
instruction as NOP. But since CACHE can operate on ITC Tags new
MIPS_HFLAG_ITC_CACHE hflag is introduced to generate the helper only when
CACHE is in the ITC Access mode.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae 40d48212f9 target-mips: check CP0 enabled for CACHE instruction also in R6
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae 34fa7e83e1 hw/mips: implement ITC Configuration Tags and Storage Cells
Implement ITC as a single object consisting of two memory regions:

1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which
are accessible by the CPU via CACHE instruction. Also adding
MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will
dispatch reads/writes directly.

2) storage_io: memory-mapped ITC Storage whose address space is configurable
(i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers.

ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the
ITC cell tag indicates the type of the cell. If the ITC Storage contains
both types of cells then FIFOs are located before Semaphores.

Since issuing thread can get blocked on the access to a cell (in E/F
Synchronized and P/V Synchronized Views) each cell has a bitmap to track
which threads are currently blocked.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:14:00 +01:00
Leon Alrae a9a9506171 target-mips: enable CM GCR in MIPS64R6-generic CPU
Indicate that in the MIPS64R6-generic CPU the memory-mapped
Global Configuration Register Space is implemented.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Leon Alrae bff384a4fb hw/mips_malta: add CPS to Malta board
If the user specifies smp > 1 and the CPU with CM GCR support, then
create Coherent Processing System (which takes care of instantiating CPUs)
rather than CPUs directly and connect i8259 and cbus to the pins exposed by
CPS. However, there is no GIC yet, thus CPS exposes CPU's IRQ pins so use
the same pin numbers as before.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Yongbok Kim c870e3f52c target-mips: add CMGCRBase register
Physical base address for the memory-mapped Coherency Manager Global
Configuration Register space.
The MIPS default location for the GCR_BASE address is 0x1FBF_8.
This register only exists if Config3 CMGCR is set to one.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
[leon.alrae@imgtec.com: move CMGCR enabling to a separate patch]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30 09:13:59 +01:00
Peter Maydell 84a5a80148 * Log filtering from Alex and Peter
* Chardev fix from Marc-André
 * config.status tweak from David
 * Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
 * get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
 * Coverity fix from myself
 * PKE implementation from myself, based on rth's XSAVE support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
 wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
 zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
 2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
 Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
 Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
 =K12D
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support

# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (28 commits)
  target-i386: implement PKE for TCG
  config.status: Pass extra parameters
  char: translate from QIOChannel error to errno
  exec: fix error handling in file_ram_alloc
  cputlb: modernise the debug support
  qemu-log: support simple pid substitution for logs
  target-arm: dfilter support for in_asm
  qemu-log: dfilter-ise exec, out_asm, op and opt_op
  qemu-log: new option -dfilter to limit output
  qemu-log: Improve the "exec" TB execution logging
  qemu-log: Avoid function call for disabled qemu_log_mask logging
  qemu-log: correct help text for -d cpu
  tcg: pass down TranslationBlock to tcg_code_gen
  util: move declarations out of qemu-common.h
  Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
  hw: explicitly include qemu-common.h and cpu.h
  include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
  isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
  Move ParallelIOArg from qemu-common.h to sysemu/char.h
  Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	scripts/clean-includes
2016-03-24 21:42:40 +00:00
Leon Alrae ba5c79f262 target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUs
MIPS Release 6 and MIPS SIMD Architecture make it mandatory to have IEEE
754-2008 FPU which is indicated by CP1 FIR.HAS2008, FCSR.ABS2008 and
FCSR.NAN2008 bits set to 1.

In QEMU we still keep these bits cleared as there is no 2008-NaN support.
However, this now causes problems preventing from running R6 Linux with
the v4.5 kernel. Kernel refuses to execute 2008-NaN ELFs on a CPU
whose FPU does not support 2008-NaN encoding:

  (...)
  VFS: Mounted root (ext4 filesystem) readonly on device 8:0.
  devtmpfs: mounted
  Freeing unused kernel memory: 256K (ffffffff806f0000 - ffffffff80730000)
  request_module: runaway loop modprobe binfmt-464c
  Starting init: /sbin/init exists but couldn't execute it (error -8)
  request_module: runaway loop modprobe binfmt-464c
  Starting init: /bin/sh exists but couldn't execute it (error -8)
  Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

Therefore always indicate presence of 2008-NaN support in R6 as well as in
R5+MSA CPUs, even though this feature is not yet supported by MIPS in QEMU.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-23 13:36:55 +00:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Lluís Vilanova 1bcea73e13 tcg: Add type for vCPU pointers
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.

Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.

Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-03-01 13:27:09 +00:00