Commit Graph

27 Commits

Author SHA1 Message Date
Peter Maydell
80c71a241a block: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-01-20 13:36:23 +01:00
Paolo Bonzini
f71e42a5c9 pflash_cfi01: add secure property
When this property is set, MMIO accesses are only allowed with the
MEMTXATTRS_SECURE attribute.  This is used for secure access to UEFI
variables stored in flash.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Paolo Bonzini
5aa113f0a2 pflash_cfi01: change to new-style MMIO accessors
This is a required step to implement read_with_attrs and write_with_attrs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:39 +02:00
Paolo Bonzini
e98094221e pflash_cfi01: change big-endian property to BIT type
Make this consistent with the secure property, added in the next patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05 17:36:31 +02:00
Markus Armbruster
9b3d111ad9 hw: Propagate errors through qdev_prop_set_drive()
Three kinds of callers:

1. On failure, report the error and abort

   Passing &error_abort does the job.  No functional change.

2. On failure, report the error and exit()

   This is qdev_prop_set_drive_nofail().  Error reporting moves from
   qdev_prop_set_drive() to its caller.  Because hiding away the error
   in the monitor right before exit() isn't helpful, replace
   qerror_report_err() by error_report_err().  Shouldn't make a
   difference, because qdev_prop_set_drive_nofail() should never be
   used in QMP context.

3. On failure, report the error and recover

   This is usb_msd_init() and scsi_bus_legacy_add_drive().  Error
   reporting and freeing the error object moves from
   qdev_prop_set_drive() to its callers.

   Because usb_msd_init() can't run in QMP context, replace
   qerror_report_err() by error_report_err() there.

   No functional change.

   scsi_bus_legacy_add_drive() calling qerror_report_err() is of
   course inappropriate, but this commit merely makes it more obvious.
   The next one will clean it up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10 11:18:23 +01:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Peter Maydell
2b31cd4e08 - Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
 - Migration fixes for x86
 - The odd KVM patch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUEXeWAAoJEBvWZb6bTYby4AwP/0Hh55A7QzkkzZ66y65zM+G5
 dsgRcLjufHSRQHoNQqm6LOcicV3Ygc/X644EY6jnZCZxFh/fsWuTPqUDGxLAnxEc
 2V0PkLRIScAMOPezzxvRy6/9hkG+UYM3ZOL5D9yxA9pGuBtttw7tkts19Vqf9WZc
 NYG5TBDuEGM1c596Zpo7t10m+Oiw+Jyi5luLXsb4lh5ikdFPDrtJaf0AnFvR+ym0
 HXlj2K/0vHNowUeLoo+oWnZsW8mLE6OyJhgfo1tJtsH1BR+lQJnBnQ4moq4Sl/Wz
 +iht/4gtz34XwLILokFR6yiNrPe+MIryyv+FYxOD5loIdGVDtKMx30UkIE2/D933
 6/n5i3GBLi9JapeT9gkKTxk/UVRPzJ1PK07RWevgNZNQyTGKAUGp+p48nSzMYX7V
 7GFSy3Q8uqOR8g9n+t+RURxkoMNbhhw7v53Z3PPXPCALCMDzg9RARlW/nkfiExcZ
 oThUjE/8xfMTQlN1SO5HTyQXEkYjtknZhfC7/KFvkWYMbCG0KBTf212Md0zlTNkj
 +C6r8Gq4ZWVIc07QyKkoCMxB+a9Uhvy4T1PKuSlm6iu94zUgZRhdf/PlOXimhFqH
 9GL67Tv15kpj05xCS6jDXjeMZ416/UKw91OcsiT1UUHcq7/rc+GBycd0ngV1UgnQ
 di5V12IVt8JwdzFxMeCT
 =GIKW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

- Memory: improve error reporting and avoid crashes on hotplug
- Build: fixing block/iscsi.so and ranlib warnings on Mac OS X
- Migration fixes for x86
- The odd KVM patch.

# gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (21 commits)
  gdbstub: init mon_chr through qemu_chr_alloc
  pckbd: adding new fields to vmstate
  mc146818rtc: add missed field to vmstate
  piix: do not set irq while loading vmstate
  serial: fixing vmstate for save/restore
  parallel: adding vmstate for save/restore
  fdc: adding vmstate for save/restore
  cpu: init vmstate for ticks and clock offset
  apic_common: vapic_paddr synchronization fix
  vl: use QLIST_FOREACH_SAFE to visit change state handlers
  exec: add parameter errp to gethugepagesize
  exec: report error when memory < hpagesize
  hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big
  memory: add parameter errp to memory_region_init_rom_device
  memory: add parameter errp to memory_region_init_ram
  exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr
  rules.mak: Fix DSO build by pulling in archive symbols
  util: Don't link host-utils.o if it's empty
  util: Move general qemu_getauxval to util/getauxval.c
  trace: Only link generated-tracers.o with "simple" backend
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12 16:55:49 +01:00
Hu Tao
33e0eb5297 memory: add parameter errp to memory_region_init_rom_device
Add parameter errp to memory_region_init_rom_device and update all call
sites to propagate the error.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Propagate the error out of realize. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:41:44 +02:00
Laszlo Ersek
4c0cfc72b3 pflash_cfi01: write flash contents to bdrv on incoming migration
A drive that backs a pflash device is special:
- it is very small,
- its entire contents are kept in a RAMBlock at all times, covering the
  guest-phys address range that provides the guest's view of the emulated
  flash chip.

The pflash device model keeps the drive (the host-side file) and the
guest-visible flash contents in sync. When migrating the guest, the
guest-visible flash contents (the RAMBlock) is migrated by default, but on
the target host, the drive (the host-side file) remains in full sync with
the RAMBlock only if:
- the source and target hosts share the storage underlying the pflash
  drive,
- or the migration requests full or incremental block migration too, which
  then covers all drives.

Due to the special nature of pflash drives, the following scenario makes
sense as well:
- no full nor incremental block migration, covering all drives, alongside
  the base migration (justified eg. by shared storage for "normal" (big)
  drives),
- non-shared storage for pflash drives.

In this case, currently only those portions of the flash drive are updated
on the target disk that the guest reprograms while running on the target
host.

In order to restore accord, dump the entire flash contents to the bdrv in
a post_load() callback.

- The read-only check follows the other call-sites of pflash_update();
- both "pfl->ro" and pflash_update() reflect / consider the case when
  "pfl->bs" is NULL;
- the total size of the flash device is calculated as in
  pflash_cfi01_realize().

When using shared storage, or requesting full or incremental block
migration along with the normal migration, the patch should incur a
harmless rewrite from the target side.

It is assumed that, on the target host, RAM is loaded ahead of the call to
pflash_post_load().

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:43 +01:00
Laszlo Ersek
afeb25f926 pflash_cfi01: fixup stale DPRINTF() calls
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:42 +01:00
Paolo Bonzini
469b046ead memory: remove memory_region_destroy
The function is empty after the previous patch, so remove it.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18 12:06:21 +02:00
Peter Maydell
a0289b8af3 hw/block/pflash_cfi01: Report correct size info for parallel configs
If the flash device is configured with a device-width which is
not equal to the bank-width, indicating that it is actually several
narrow flash devices in parallel, the CFI table should report the
number of blocks and the size of a single device, not of the whole
combined setup. This stops Linux from complaining:
"NOR chip too large to fit in mapping. Attempting to cope..."

As usual, we retain the old broken but backwards compatible behaviour
when the device-width is not specified.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402409025-25694-1-git-send-email-peter.maydell@linaro.org
2014-06-19 18:06:25 +01:00
Roy Franz
0163a2dc80 Fix NOR flash device ID reading
Fix NOR flash manufacturer and device ID reading.  This now
properly takes into account device widths and device max widths
as required.  The reading of these IDs uses the same max_width
dependent addressing as CFI queries.

The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate.  The existing code seems very broken.

Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.

The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
4433e660e3 Fix CFI query responses for NOR flash
This change fixes the CFI query responses to handle NOR device
widths that are different from the bank width.  Support is also
added for multi-width devices in a x8 configuration.  This is
typically x8/x16 devices, but the CFI specification mentions
x8/x32 devices so those should be supported as well if they
exist.
The query response data is now replicated per-device in the bank,
and is adjusted for x16 or x32 parts configured in x8 mode.

The existing code is left in place for boards that have not
been updated to specify an explicit device_width.  The VExpress
board has been updated in an earlier patch in this series so
this is the only board currently affected.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org
[PMM: fixed a few formatting nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
fa21a7b13e Add max device width parameter for NOR devices
For handling CFI and device ID reads, we need to not only know the
width that a NOR flash device is configured for, but also its maximum
width.  The maximum width addressing mode is used for multi-width
parts no matter which width they are configured for.  The most common
case is x16 parts that also support x8 mode.  When configured for x8
operation these devices respond to CFI and device ID requests differently
than native x8 NOR parts.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org
[PMM: Added comment explaining the semantics of width vs device-width
 vs max-device-width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:27 +00:00
Roy Franz
2003889f67 return status for each NOR flash device
Now that we know how wide each flash device that makes up the bank is,
return status for each device in the bank.  Leave existing code
that treats 32 bit wide banks as composed of two 16 bit devices as otherwise
we may break configurations that do not set the device_width propery.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Roy Franz
1997b48527 Add device-width property to pflash_cfi01
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes.  This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Roy Franz
4b6fedcac0 rename pflash_t member width to bank_width
Rename the 'width' member of the pflash_t structure
in preparation for adding a bank_width member.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386279359-32286-2-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17 19:42:26 +00:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Marcel Apfelbaum
125ee0ed9c devices: Associate devices to their logical category
The category will be used to sort the devices displayed in
the command line help.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29 10:37:09 -05:00
Paul Burton
ea0a4f3441 pflash_cfi01: duplicate status byte from bits 23:16 for 32bit reads
The firmware commonly used with MIPS Malta boards (YAMON) reads the
status of the pflash with a 32bit memory access. On real hardware
this results in the status byte being mirrored in the upper 16 bits
of the read value. For example if the status byte is represented by
SS then the hardware reads 0x00SS00SS. The YAMON firmware compares the
status against 32bit values expecting the mirrored value and fails
without it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28 19:59:23 +02:00
Hu Tao
e40b5f3e0e pflash_cfi01: Use QOM realize for pflash_cfi01
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed argument]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
Hu Tao
f1b44f0e41 pflash-cfi01: QOM'ify some more
Introduce type constant and replace FROM_SYSBUS().

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:34 +02:00
Paolo Bonzini
2d256e6f65 hw/block: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:47 +02:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Jan Kiszka
5f9a5ea1c0 memory: Rename readable flag to romd_mode
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.

So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24 18:42:46 +02:00
Paolo Bonzini
49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00