Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To get rid of the global smp_* variables we're currently using, it's recommended
to pass MachineState in the list of incoming parameters for functions that use
global smp variables, thus some redundant parameters are dropped. It's applied
for legacy smbios_*(), *_machine_reset(), hot_add_cpu() and mips *_create_cpu().
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-3-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The cpu topology property CpuTopology is added to the MachineState
and its members are initialized with the leagcy global smp variables.
From this commit, the code in the system emulation mode is supposed to
use cpu topology variables from MachineState instead of the global ones
defined in vl.c and there is no semantic change.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-2-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- tests/vm updates and clean-ups
- tests/vm serial autobuild on host (-netbsd v3)
- ensure MacOS builds do "brew update"
- ensure we test --static user builds
- fix hyperv compile failure
- fix missing var warning for OpenBSD (v2)
This brings my testing back to green on all CI services. Please note
the BSD installs will throw out some warnings during the setup phase.
They shouldn't re-occur once the images are built. NetBSD has been
dropped for now given slow install issues.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl0fIzkACgkQ+9DbCVqe
KkQ5rggAivGftiInedQmF0M8F+vBHSQNUSVrB19e/mBgA/Z4WopFrZNUltAMry84
HwvQFmzAkq9OwqkOxeGcM3ABSa4Eum6lyxURg767TxK5NswKknEacgpt83FsXAJU
nckTJPdeIGWIWntyBhu4TdREGVvYR1hk3aDBcb81V5Y5ZVkNaOp//td0eMDHuP0/
EIGFfZt78kCgxs3Yblhen8ayx4XiEF2oICMZi+jZZnjcmOfHsYzHASq7saWDS+ne
2fPgYLl6E/q5VgrUa4mziNu1bUPSfdidp8028Kc8FrpY/vVqvkU3TANDrTP8ag8w
MwvRpyOrm9zC1Oe+diBk+uAfI7GmcA==
=4Lin
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-050719-3' into staging
Various testing fixes:
- tests/vm updates and clean-ups
- tests/vm serial autobuild on host (-netbsd v3)
- ensure MacOS builds do "brew update"
- ensure we test --static user builds
- fix hyperv compile failure
- fix missing var warning for OpenBSD (v2)
This brings my testing back to green on all CI services. Please note
the BSD installs will throw out some warnings during the setup phase.
They shouldn't re-occur once the images are built. NetBSD has been
dropped for now given slow install issues.
# gpg: Signature made Fri 05 Jul 2019 11:15:21 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-050719-3:
migration: move port_attr inside CONFIG_LINUX
target/i386: fix feature check in hyperv-stub.c
Makefile: Rename the 'vm-test' target as 'vm-help'
.travis.yml: force a brew update for MacOS builds
.travis.yml: default the --disable-system build to --static
tests/vm: ubuntu.i386: apt proxy setup
tests/vm: fedora autoinstall, using serial console
tests/vm: freebsd autoinstall, using serial console
tests/vm: openbsd autoinstall, using serial console
tests/vm: serial console support helpers
tests/vm: add vm-boot-{ssh,serial}-<guest> targets
tests/vm: proper guest shutdown
tests/vm: run test builds on snapshot
tests/vm: use ssh with pty unconditionally
tests/vm: send proxy environment variables over ssh
tests/vm: add source repos on ubuntu.i386
tests/vm: pin ubuntu.i386 image
tests/vm: avoid image presence check and removal
tests/vm: avoid extra compressed image copy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
/jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
=WAFb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (22 commits)
docs: avoid vhost-user-net specifics in multiqueue section
libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
libvhost-user: support many virtqueues
libvhost-user: add vmsg_set_reply_u64() helper
pc: Move compat_apic_id_mode variable to PCMachineClass
virtio: Don't change "started" flag on virtio_vmstate_change()
virtio: Make sure we get correct state of device on handle_aio_output()
virtio: Set "start_on_kick" on virtio_set_features()
virtio: Set "start_on_kick" for legacy devices
virtio: add "use-started" property
virtio-pci: fix missing device properties
pc: Support for virtio-pmem-pci
numa: Handle virtio-pmem in NUMA stats
hmp: Handle virtio-pmem when printing memory device infos
virtio-pci: Proxy for virtio-pmem
virtio-pmem: sync linux headers
virtio-pci: Allow to specify additional interfaces for the base type
virtio-pmem: add virtio device
pcie: minor cleanups for slot control/status
pcie: work around for racy guest init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Turns out my last fix to this broke one case for Rage 128 Pro so
revert that part of previous patch. This now fixes the remaining
rendering problems for MorphOS which now can produce picture with
-device ati-vga (although it may not be optimised yet and video
overlay emulation is still known to be missing).
Fixes: 866ad5f5ff
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: da33261a841755691f698db8190c868df0c0d3ae.1562276605.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pixman library only supports blts with left to right, top to
bottom order but the ATI VGA engine can also do different directions.
Fix support for these via a temporary buffer for now. This fixes
rendering issues related to such blts (such as moving windows) but
some other glitches still remain.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e21855faaeb30d7b1771f084f283f6a30bedb1a3.1562227303.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The extended mode frame buffer should be little endian even when
emulating big endian machine (such as PPC). This fixes color problems
with MorphOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 439aa85061f103446df7b42632d730971a372432.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The "Multiple queue support" section makes references to vhost-user-net
"queue pairs". This is confusing for two reasons:
1. This actually applies to all device types, not just vhost-user-net.
2. VHOST_USER_GET_QUEUE_NUM returns the number of virtqueues, not the
number of queue pairs.
Reword the section so that the vhost-user-net specific part is relegated
to the very end: we acknowledge that vhost-user-net historically
automatically enabled the first queue pair.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Existing vhost-user device backends, including vhost-user-scsi and
vhost-user-blk, support multiqueue but libvhost-user currently does not
advertise this.
VHOST_USER_PROTOCOL_F_MQ enables the VHOST_USER_GET_QUEUE_NUM request
needed for a vhost-user master to query the number of queues. For
example, QEMU's vhost-user-net master depends on
VHOST_USER_PROTOCOL_F_MQ for multiqueue.
If you're wondering how any device backend with more than one virtqueue
functions today, it's because device types with a fixed number of
virtqueues do not require querying the number of queues. Therefore the
vhost-user master for vhost-user-input with 2 virtqueues, for example,
doesn't actually depend on VHOST_USER_PROTOCOL_F_MQ. It just enables
virtqueues 0 and 1 without asking.
Let there be multiqueue!
Suggested-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently libvhost-user is hardcoded to at most 8 virtqueues. The
device backend should decide the number of virtqueues, not
libvhost-user. This is important for multiqueue device backends where
the guest driver needs an accurate number of virtqueues.
This change breaks libvhost-user and libvhost-user-glib API stability.
There is no stability guarantee yet, so make this change now and update
all in-tree library users.
This patch touches up vhost-user-blk, vhost-user-gpu, vhost-user-input,
vhost-user-scsi, and vhost-user-bridge. If the device has a fixed
number of queues that exact number is used. Otherwise the previous
default of 8 virtqueues is used.
vu_init() and vug_init() can now fail if malloc() returns NULL. I
considered aborting with an error in libvhost-user but it should be safe
to instantiate new vhost-user instances at runtime without risk of
terminating the process. Therefore callers need to handle the vu_init()
failure now.
vhost-user-blk and vhost-user-scsi duplicate virtqueue index checks that
are already performed by libvhost-user. This code would need to be
modified to use max_queues but remove it completely instead since it's
redundant.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VhostUserMsg request is reused as the reply by message processing
functions. This is risky since request fields may corrupt the reply if
the vhost-user message handler function forgets to re-initialize them.
Changing this practice would be very invasive but we can introduce a
helper function to make u64 payload replies safe. This also eliminates
code duplication in message processing functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190626074815.19994-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the static variable with a PCMachineClass field. This
will help us eventually get rid of the pc_compat_*() init
functions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190628200227.1053-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We will call virtio_set_status() on virtio_vmstate_change().
The "started" flag should not be changed in this case. Otherwise,
we may get an incorrect value when we set "started" flag but
not set DRIVER_OK in source VM.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should set the flags: "start_on_kick" and "started" after we call
the kick functions (handle_aio_output() and handle_output()).
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The guest feature is not set correctly on virtio_reset() and
virtio_init(). So we should not use it to set "start_on_kick" at that
point. This patch set "start_on_kick" on virtio_set_features() instead.
Fixes: badaf79cfd ("virtio: Introduce started flag to VirtioDevice")
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190626023130.31315-4-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Besides virtio 1.0 transitional devices, we should also
set "start_on_kick" flag for legacy devices (virtio 0.9).
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190626023130.31315-3-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit a4ee4c8baa ("virtio: Helper for registering virtio
device types"), virtio-gpu-pci, virtio-vga, and virtio-crypto-pci lost
some properties: "ioeventfd" and "vectors". This may cause various
issues, such as failing migration or invalid properties.
Since those VirtioPCI devices do not have a base name, their class are
initialized with virtio_pci_generic_base_class_init(). However, if the
VirtioPCIDeviceTypeInfo provided a class_init which sets dc->props,
the properties were overwritten by virtio_pci_generic_class_init().
Instead, introduce an intermediary base-type to register the generic
properties.
Fixes: a4ee4c8baa
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190625232333.30752-1-marcandre.lureau@redhat.com>
Override the device hotplug handler to properly handle the memory device
part via virtio-pmem-pci callbacks from the machine hotplug handler and
forward to the actual PCI bus hotplug handler.
As PCI hotplug has not been properly factored out into hotplug handlers,
most magic is performed in the (un)realize functions. Also some PCI host
buses don't have a PCI hotplug handler at all yet, just to be sure that
we alway have a hotplug handler on x86, add a simple error check.
Unlocking virtio-pmem will unlock virtio-pmem-pci.
Signed-off-by: David Hildenbrand <david@redhat.com>
[ Disable virtio-pmem hotunplug ]
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-8-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Account the memory to node 0 for now. Once (if ever) virtio-pmem
supports NUMA, we can account it to the right node.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-7-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Print the memory device info just like for PCDIMM/NVDIMM.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-6-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need a proxy device for virtio-pmem, and this device has to be the
actual memory device so we can cleanly hotplug it.
Forward memory device class functions either to the actual device or use
properties of the virtio-pmem device to implement these in the proxy.
virtio-pmem will only be compiled for selected, supported architectures
(that can deal with virtio/pci devices being memory devices). An
architecture that is prepared for that can simply enable
CONFIG_VIRTIO_PMEM to make it work.
As not all architectures support memory devices (and CONFIG_VIRTIO_PMEM
will be enabled per supported architecture), we have to move the PCI proxy
to a separate file.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
[ split up patches, memory-device changes, move pci proxy]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-5-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add linux headers for virtio pmem. These are not yet upstream - include
them temporarily as merge window in which this is supposed to be is
coming up shortly. If virtio-pmem ends up not being merged
then this will be reverted and accordingly virtio-pmem dropped.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <20190619094907.10131-4-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Otherwise the FreeBSD compiler complains about an unused variable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Commit 2d384d7c8 broken the build when built with:
configure --without-default-devices --disable-user
The reason was the conversion of cpu->hyperv_synic to
cpu->hyperv_synic_kvm_only although the rest of the patch introduces a
feature checking mechanism. So I've fixed the KVM_EXIT_HYPERV_SYNIC in
hyperv-stub to do the same feature check as in the real hyperv.c
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
We already have 'make check-help', use the 'make vm-help' form
to display helps about VM testing. Keep the old target to not
bother old customs.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190531064341.29730-1-philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It looks like the Travis image package databases are out of date
causing the build to error with:
Error: Your Homebrew is outdated. Please run `brew update`.
Error: Kernel.exit
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It's fairly common to build qemu-user binaries with --static linking
so the binary can be copied around without libraries. Enable --static
in the default qemu-user build to cover this.
There are other qemu-user builds that use dynamic linking so they
should catch any problems there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Configure apt proxy so package downloads
can be cached and can pass firewalls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-12-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Download the install iso and prepare the image locally. Install to
disk, using the serial console. Create qemu user, configure ssh login.
Install packages needed for qemu builds.
Yes, we have docker images for fedora. But for trouble-shooting it
might be helpful to have a vm too. When vm builds fail you can use
it to figure whenever the vm setup or the guest os is the problem.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-11-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Note that freebsd package downloads are delivered as non-cachable
content, so I had to configure squid with "ignore-no-store
ignore-private ignore-reload" for pkgmir.geo.freebsd.org to make the
caching actually work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190617043858.8290-9-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Instead of fetching the prebuilt image from patchew download the install
iso and prepare the image locally. Install to disk, using the serial
console. Create qemu user, configure ssh login. Install packages
needed for qemu builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-8-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Add a bunch of helpers to talk to the guest using the
serial console.
Also drop the hard-coded -serial parameter for the vm
so QEMUMachine.set_console() actually works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-7-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
For testing/troubleshooting convenience.
make vm-boot-serial-<guest>
Boot guest, with the serial console on stdio.
make vm-boot-ssh-<guest>
Boot guest, login via ssh.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-6-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
When not running in snapshot mode ask the guest to poweroff and wait for
this to finish instead of simply quitting qemu, so the guest can flush
pending updates to disk.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-5-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The build script doesn't shutdown the guest VMs properly,
which results in filesystem corruption and guest boot
failures sooner or later.
Use the --snapshot to run builds on a snapshot,
That way killing the VM doesn't corrupt the base image.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-4-kraxel@redhat.com>
[AJB: added tags]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Allways ask ssh to run with a pseudo terminal.
Not having a terminal causes problems now and then.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-3-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Packages are fetched via proxy that way, if configured on the host.
That might be required to pass firewalls, and it allows to route
package downloads through a caching proxy server.
Needs AcceptEnv setup in sshd_config on the guest side to work.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190617043858.8290-2-kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Possibly because of different behavior on the newly update
cloud-image, trying to run 'apt-get build-dep' results in:
E: You must put some 'source' URIs in your sources.list
This enables all source repos (even though some are not
needed) for simplicity sake.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-5-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
It's a good practice to always have the same components used in tests.
According to:
https://cloud-images.ubuntu.com/releases/16.04/
New images are released from time to time, and the "release/"
directory points to the latest release. Let's pin to the latest
available version, and while at it, set a hash for verification.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-4-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Python's os.rename() will silently replace an existing file,
so there's no need for the extra check and removal.
Reference: https://docs.python.org/3/library/os.html#os.rename
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The image copy is only really needed because xz doesn't know to
properly decompress a file not named properly. Instead of
decompressing to stdout, and having to rely on a shell, let's just
create a link instead of copying the file.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190613130718.3763-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
* more code-movement to separate TCG-only functions into their own files
* Correct VMOV_imm_dp handling of short vectors
* Execute Thumb instructions when their condbits are 0xf
* armv7m_systick: Forbid non-privileged accesses
* Use _ra versions of cpu_stl_data() in v7M helpers
* v8M: Check state of exception being returned from
* v8M: Forcibly clear negative-priority exceptions on deactivate
-----BEGIN PGP SIGNATURE-----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=vttM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190704-1' into staging
target-arm queue:
* more code-movement to separate TCG-only functions into their own files
* Correct VMOV_imm_dp handling of short vectors
* Execute Thumb instructions when their condbits are 0xf
* armv7m_systick: Forbid non-privileged accesses
* Use _ra versions of cpu_stl_data() in v7M helpers
* v8M: Check state of exception being returned from
* v8M: Forcibly clear negative-priority exceptions on deactivate
# gpg: Signature made Thu 04 Jul 2019 17:31:22 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20190704-1:
target/arm: Correct VMOV_imm_dp handling of short vectors
target/arm: Execute Thumb instructions when their condbits are 0xf
hw/timer/armv7m_systick: Forbid non-privileged accesses
target/arm: Use _ra versions of cpu_stl_data() in v7M helpers
target/arm: v8M: Check state of exception being returned from
arm v8M: Forcibly clear negative-priority exceptions on deactivate
target/arm/helper: Move M profile routines to m_helper.c
target/arm: Restrict semi-hosting to TCG
target/arm: Move debug routines to debug_helper.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity points out (CID 1402195) that the loop in trans_VMOV_imm_dp()
that iterates over the destination registers in a short-vector VMOV
accidentally throws away the returned updated register number
from vfp_advance_dreg(). Add the missing assignment. (We got this
correct in trans_VMOV_imm_sp().)
Fixes: 18cf951af9
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190702105115.9465-1-peter.maydell@linaro.org
Thumb instructions in an IT block are set up to be conditionally
executed depending on a set of condition bits encoded into the IT
bits of the CPSR/XPSR. The architecture specifies that if the
condition bits are 0b1111 this means "always execute" (like 0b1110),
not "never execute"; we were treating it as "never execute". (See
the ConditionHolds() pseudocode in both the A-profile and M-profile
Arm ARM.)
This is a bit of an obscure corner case, because the only legal
way to get to an 0b1111 set of condbits is to do an exception
return which sets the XPSR/CPSR up that way. An IT instruction
which encodes a condition sequence that would include an 0b1111 is
UNPREDICTABLE, and for v8A the CONSTRAINED UNPREDICTABLE choices
for such an IT insn are to NOP, UNDEF, or treat 0b1111 like 0b1110.
Add a comment noting that we take the latter option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190617175317.27557-7-peter.maydell@linaro.org
Like most of the v7M memory mapped system registers, the systick
registers are accessible to privileged code only and user accesses
must generate a BusFault. We implement that for registers in
the NVIC proper already, but missed it for systick since we
implement it as a separate device. Correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190617175317.27557-6-peter.maydell@linaro.org
Like Xu
Peter Maydell
BALATON Zoltan
Stefan Hajnoczi
Eduardo Habkost
Xie Yongji
Marc-André Lureau
David Hildenbrand
Pankaj Gupta
Alex Bennée
Philippe Mathieu-Daudé
Gerd Hoffmann
Cleber Rosa