In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The MC68040 MMU provides the size of the access that
triggers the page fault.
This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.
So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().
To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.
This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
Normally we create an address space for that CPU and pass that address
space into the function. Let's just do it inside to unify address space
creations. It'll simplify my next patch to rename those address spaces.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20171123092333.16085-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are still seeing signals during translation time when we walk over
a page protection boundary. This expands the check to ensure the host
PC is inside the code generation buffer. The original suggestion was
to check versus tcg_ctx.code_gen_ptr but as we now segment the
translation buffer we have to settle for just a general check for
being inside.
I've also fixed up the declaration to make it clear it can deal with
invalid addresses. A later patch will fix up the call sites.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171108153245.20740-2-alex.bennee@linaro.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't really free anything in this function anymore; we just remove
the TB from the binary search tree.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is a prerequisite for supporting multiple TCG contexts, since
we will have threads generating code in separate regions of
code_gen_buffer.
For this we need a new field (.size) in struct tb_tc to keep
track of the size of the translated code. This field uses a size_t
to avoid adding a hole to the struct, although really an unsigned
int would have been enough.
The comparison function we use is optimized for the common case:
insertions. Profiling shows that upon booting debian-arm, 98%
of comparisons are between existing tb's (i.e. a->size and b->size
are both !0), which happens during insertions (and removals, but
those are rare). The remaining cases are lookups. From reading the glib
sources we see that the first key is always the lookup key. However,
the code does not assume this to always be the case because this
behaviour is not guaranteed in the glib docs. However, we embed
this knowledge in the code as a branch hint for the compiler.
Note that tb_free does not free space in the code_gen_buffer anymore,
since we cannot easily know whether the tb is the last one inserted
in code_gen_buffer. The next patch in this series renames tb_free
to tb_remove to reflect this.
Performance-wise, lookups in tb_find_pc are the same as before:
O(log n). However, insertions are O(log n) instead of O(1), which
results in a small slowdown when booting debian-arm:
Performance counter stats for 'build/arm-softmmu/qemu-system-arm \
-machine type=virt -nographic -smp 1 -m 4096 \
-netdev user,id=unet,hostfwd=tcp::2222-:22 \
-device virtio-net-device,netdev=unet \
-drive file=img/arm/jessie-arm32.qcow2,id=myblock,index=0,if=none \
-device virtio-blk-device,drive=myblock \
-kernel img/arm/aarch32-current-linux-kernel-only.img \
-append console=ttyAMA0 root=/dev/vda1 \
-name arm,debug-threads=on -smp 1' (10 runs):
- Before:
8048.598422 task-clock (msec) # 0.931 CPUs utilized ( +- 0.28% )
16,974 context-switches # 0.002 M/sec ( +- 0.12% )
0 cpu-migrations # 0.000 K/sec
10,125 page-faults # 0.001 M/sec ( +- 1.23% )
35,144,901,879 cycles # 4.367 GHz ( +- 0.14% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,758,252,643 instructions # 1.87 insns per cycle ( +- 0.33% )
10,871,298,668 branches # 1350.707 M/sec ( +- 0.41% )
192,322,212 branch-misses # 1.77% of all branches ( +- 0.32% )
8.640869419 seconds time elapsed ( +- 0.57% )
- After:
8146.242027 task-clock (msec) # 0.923 CPUs utilized ( +- 1.23% )
17,016 context-switches # 0.002 M/sec ( +- 0.40% )
0 cpu-migrations # 0.000 K/sec
18,769 page-faults # 0.002 M/sec ( +- 0.45% )
35,660,956,120 cycles # 4.378 GHz ( +- 1.22% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
65,095,366,607 instructions # 1.83 insns per cycle ( +- 1.73% )
10,803,480,261 branches # 1326.192 M/sec ( +- 1.95% )
195,601,289 branch-misses # 1.81% of all branches ( +- 0.39% )
8.828660235 seconds time elapsed ( +- 0.38% )
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have curr_cflags, we can include CF_USE_ICOUNT
early and then remove it as necessary.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These flags are used by target/*/translate.c,
and affect code generation.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will enable us to decouple code translation from the value
of parallel_cpus at any given time. It will also help us minimize
TB flushes when generating code via EXCP_ATOMIC.
Note that the declaration of parallel_cpus is brought to exec-all.h
to be able to define there the "curr_cflags" inline.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for adding tc.size to be able to keep track of
TB's using the binary search tree implementation from glib.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
And fix the following warning when DEBUG_TB_INVALIDATE is enabled
in translate-all.c:
CC mipsn32-linux-user/accel/tcg/translate-all.o
/data/src/qemu/accel/tcg/translate-all.c: In function ‘tb_alloc_page’:
/data/src/qemu/accel/tcg/translate-all.c:1201:16: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘tb_page_addr_t {aka unsigned int}’ [-Werror=format=]
printf("protecting code page: 0x" TARGET_FMT_lx "\n",
^
cc1: all warnings being treated as errors
/data/src/qemu/rules.mak:66: recipe for target 'accel/tcg/translate-all.o' failed
make[1]: *** [accel/tcg/translate-all.o] Error 1
Makefile:328: recipe for target 'subdir-mipsn32-linux-user' failed
make: *** [subdir-mipsn32-linux-user] Error 2
cota@flamenco:/data/src/qemu/build ((18f3fe1...) *$)$
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This gets rid of a hole in struct TranslationBlock.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the USE_DIRECT_JUMP ifdef with a TCG_TARGET_HAS_direct_jump
boolean test. Replace the tb_set_jmp_target1 ifdef with an unconditional
function tb_target_set_jmp_target.
While we're touching all backends, add a parameter for tb->tc_ptr;
we're going to need it shortly for some backends.
Move tb_set_jmp_target and tb_add_jump from exec-all.h to cpu-exec.c.
This opens the possibility for TCG_TARGET_HAS_direct_jump to be
a runtime decision -- based on host cpu capabilities, the size of
code_gen_buffer, or a future debugging switch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Used later. An enum makes expected values explicit and
bounds the value space of switches.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will allow some amount of cleanup to happen before
switching the backends over to enum DisasJumpType.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Needed to implement a target-agnostic gen_intermediate_code()
in the future.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Benneé <alex.benee@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002025498.22386.18051908483085660588.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gVxi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170717' into staging
target-arm queue:
* new model of the ARM MPS2/MPS2+ FPGA based development board
* clean up DISAS_* exit conditions and fix various regressions
since commits e75449a3468a6b28c7b5 (in particular including
ones which broke OP-TEE guests)
* make Cortex-M3 and M4 correctly default to 8 PMSA regions
# gpg: Signature made Mon 17 Jul 2017 13:43:45 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170717:
MAINTAINERS: Add entries for MPS2 board
hw/arm/mps2: Add ethernet
hw/arm/mps2: Add SCC
hw/misc/mps2_scc: Implement MPS2 Serial Communication Controller
hw/arm/mps2: Add timers
hw/char/cmsdk-apb-timer: Implement CMSDK APB timer device
hw/arm/mps2: Add UARTs
hw/char/cmsdk-apb-uart.c: Implement CMSDK APB UART
hw/arm/mps2: Implement skeleton mps2-an385 and mps2-an511 board models
target/arm: use DISAS_EXIT for eret handling
target/arm: use gen_goto_tb for ISB handling
target/arm/translate: ensure gen_goto_tb sets exit flags
target/arm/translate.h: expand comment on DISAS_EXIT
target/arm/translate: make DISAS_UPDATE match declared semantics
include/exec/exec-all: document common exit conditions
target/arm: Make Cortex-M3 and M4 default to 8 PMSA regions
qdev: support properties which don't set a default value
qdev-properties.h: Explicitly set the default value for arraylen properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As a precursor to later patches attempt to come up with a more
concrete wording for what each of the common exit cases would be.
CC: Emilio G. Cota <cota@braap.org>
CC: Richard Henderson <rth@twiddle.net>
CC: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 20170713141928.25419-2-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Every vCPU now uses a separate set of TBs for each set of dynamic
tracing event state values. Each set of TBs can be used by any number of
vCPUs to maximize TB reuse when vCPUs have the same tracing state.
This feature is later used by tracetool to optimize tracing of guest
code events.
The maximum number of TB sets is defined as 2^E, where E is the number
of events that have the 'vcpu' property (their state is stored in
CPUState->trace_dstate).
For this to work, a change on the dynamic tracing state of a vCPU will
force it to flush its virtual TB cache (which is only indexed by
address), and fall back to the physical TB cache (which now contains the
vCPU's dynamic tracing state as part of the hashing function).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 149915775266.6295.10060144081246467690.stgit@frigg.lan
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add CONFIG_TCG around TLB-related functions and structure declarations.
Some of these functions are defined in ./accel/tcg/cputlb.c, which will
not be linked in if TCG is disabled, and have no stubs; therefore, their
callers will also be compiled out for --disable-tcg.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of exporting goto_ptr directly to TCG frontends, export
tcg_gen_lookup_and_goto_ptr(), which calls goto_ptr with the pointer
returned by the lookup_tb_ptr() helper. This is the only use case
we have for goto_ptr and lookup_tb_ptr, so having this function is
very convenient. Furthermore, it trivially allows us to avoid calling
the lookup helper if goto_ptr is not implemented by the backend.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1493263764-18657-2-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-3-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-4-git-send-email-cota@braap.org>
Message-Id: <1493263764-18657-5-git-send-email-cota@braap.org>
[rth: Squashed 4 related commits.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
This introduces support to the cputlb API for flushing all CPUs TLBs
with one call. This avoids the need for target helpers to iterate
through the vCPUs themselves.
An additional variant of the API (_synced) will cause the source vCPUs
work to be scheduled as "safe work". The result will be all the flush
operations will be complete by the time the originating vCPU executes
its safe work. The calling implementation can either end the TB
straight away (which will then pick up the cpu->exit_request on
entering the next block) or defer the exit until the architectural
sync point (usually a barrier instruction).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
While the vargs approach was flexible the original MTTCG ended up
having munge the bits to a bitmap so the data could be used in
deferred work helpers. Instead of hiding that in cputlb we push the
change to the API to make it take a bitmap of MMU indexes instead.
For ARM some the resulting flushes end up being quite long so to aid
readability I've tended to move the index shifting to a new line so
all the bits being or-ed together line up nicely, for example:
tlb_flush_page_by_mmuidx(other_cs, pageaddr,
(1 << ARMMMUIdx_S1SE1) |
(1 << ARMMMUIdx_S1SE0));
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AT: SPARC parts only]
Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[PM: ARM parts only]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some architectures allow to flush the tlb of other VCPUs. This is not a problem
when we have only one thread for all VCPUs but it definitely needs to be an
asynchronous work when we are in true multithreaded work.
We take the tb_lock() when doing this to avoid racing with other threads
which may be invalidating TB's at the same time. The alternative would
be to use proper atomic primitives to clear the tlb entries en-mass.
This patch doesn't do anything to protect other cputlb function being
called in MTTCG mode making cross vCPU changes.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: remove need for g_malloc on defer, make check fixes, tb_lock]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
There are now only two uses of the global exit_request left.
The first ensures we exit the run_loop when we first start to process
pending work and in the kick handler. This is just as easily done by
setting the first_cpu->exit_request flag.
The second use is in the round robin kick routine. The global
exit_request ensured every vCPU would set its local exit_request and
cause a full exit of the loop. Now the iothread isn't being held while
running we can just rely on the kick handler to push us out as intended.
We lightly re-factor the main vCPU thread to ensure cpu->exit_requests
cause us to exit the main loop and process any IO requests that might
come along. As an cpu->exit_request may legitimately get squashed
while processing the EXCP_INTERRUPT exception we also check
cpu->queued_work_first to ensure queued work is expedited as soon as
possible.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
..and make the definition local to cpus. In preparation for MTTCG the
concept of a global tcg_current_cpu will no longer make sense. However
we still need to keep track of it in the single-threaded case to be able
to exit quickly when required.
qemu_cpu_kick_no_halt() moves and becomes qemu_cpu_kick_rr_cpu() to
emphasise its use-case. qemu_cpu_kick now kicks the relevant cpu as
well as qemu_kick_rr_cpu() which will become a no-op in MTTCG.
For the time being the setting of the global exit_request remains.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
When icount is active, tb_add_jump is surprisingly called with an
out of bounds basic block index. I have no idea how that can work,
but it does not seem like a good idea. Clear *last_tb for all
TB_EXIT_ICOUNT_EXPIRED cases, even when all you have to do is
refill icount_extra.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
softmmu requires more functions to be thread-safe, because translation
blocks can be invalidated from e.g. notdirty callbacks. Probably the
same holds for user-mode emulation, it's just that no one has ever
tried to produce a coherent locking there.
This patch will guide the introduction of more tb_lock and tb_unlock
calls for system emulation.
Note that after this patch some (most) of the mentioned functions are
still called outside tb_lock/tb_unlock. The next one will rectify this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-7-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds asserts to check the locking on the various translation
engines structures. There are two sets of structures that are protected
by locks.
The first the l1map and PageDesc structures used to track which
translation blocks are associated with which physical addresses. In
user-mode this is covered by the mmap_lock.
The second case are TB context related structures which are protected by
tb_lock which is also user-mode only.
Currently the asserts do nothing in SoftMMU mode but this will change
for MTTCG.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20161027151030.20863-4-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we cannot emulate an atomic operation within a parallel
context, this exception allows us to stop the world and try
again in a serial context.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Modify all CPUs to call it from XXX_cpu_realizefn() function.
Remove all the cannot_destroy_with_object_finalize_yet as
unsafe references have been moved to cpu_exec_realizefn().
(tested with QOM command provided by commit 4c315c27)
for arm:
Setting of cpu->mp_affinity is moved from arm_cpu_initfn()
to arm_cpu_realizefn() as setting of cpu_index is now done
in cpu_exec_realizefn(). To avoid to overwrite an user defined
value, we set it to an invalid value by default, and update
it in realize function only if the value is still invalid.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The return address argument to the softmmu template helpers was
confused. In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL. However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.
Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.
This makes GETPC and GETRA identical. Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Signed-off-by: Richard Henderson <rth@twiddle.net>
When invalidating a translation block, set an invalid flag into the
TranslationBlock structure first. It is also necessary to check whether
the target TB is still valid after acquiring 'tb_lock' but before calling
tb_add_jump() since TB lookup is to be performed out of 'tb_lock' in
future. Note that we don't have to check 'last_tb'; an already invalidated
TB will not be executed anyway and it is thus safe to patch it.
Suggested-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are functions tlb_fill(), cpu_unaligned_access() and
do_unaligned_access() that are called with access type and mmu index
arguments. But these arguments are named 'is_write' and 'is_user' in their
declarations. The patches fix the arguments to avoid a confusion.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1465907177-1399402-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having a fixed-size hash table for keeping track of all translation blocks
is suboptimal: some workloads are just too big or too small to get maximum
performance from the hash table. The MRU promotion policy helps improve
performance when the hash table is a little undersized, but it cannot
make up for severely undersized hash tables.
Furthermore, frequent MRU promotions result in writes that are a scalability
bottleneck. For scalability, lookups should only perform reads, not writes.
This is not a big deal for now, but it will become one once MTTCG matures.
The appended fixes these issues by using qht as the implementation of
the TB hash table. This solution is superior to other alternatives considered,
namely:
- master: implementation in QEMU before this patchset
- xxhash: before this patch, i.e. fixed buckets + xxhash hashing + MRU.
- xxhash-rcu: fixed buckets + xxhash + RCU list + MRU.
MRU is implemented here by adding an intermediate struct
that contains the u32 hash and a pointer to the TB; this
allows us, on an MRU promotion, to copy said struct (that is not
at the head), and put this new copy at the head. After a grace
period, the original non-head struct can be eliminated, and
after another grace period, freed.
- qht-fixed-nomru: fixed buckets + xxhash + qht without auto-resize +
no MRU for lookups; MRU for inserts.
The appended solution is the following:
- qht-dyn-nomru: dynamic number of buckets + xxhash + qht w/ auto-resize +
no MRU for lookups; MRU for inserts.
The plots below compare the considered solutions. The Y axis shows the
boot time (in seconds) of a debian jessie image with arm-softmmu; the X axis
sweeps the number of buckets (or initial number of buckets for qht-autoresize).
The plots in PNG format (and with errorbars) can be seen here:
http://imgur.com/a/Awgnq
Each test runs 5 times, and the entire QEMU process is pinned to a
single core for repeatability of results.
Host: Intel Xeon E5-2690
28 ++------------+-------------+-------------+-------------+------------++
A***** + + + master **A*** +
27 ++ * xxhash ##B###++
| A******A****** xxhash-rcu $$C$$$ |
26 C$$ A******A****** qht-fixed-nomru*%%D%%%++
D%%$$ A******A******A*qht-dyn-mru A*E****A
25 ++ %%$$ qht-dyn-nomru &&F&&&++
B#####% |
24 ++ #C$$$$$ ++
| B### $ |
| ## C$$$$$$ |
23 ++ # C$$$$$$ ++
| B###### C$$$$$$ %%%D
22 ++ %B###### C$$$$$$C$$$$$$C$$$$$$C$$$$$$C$$$$$$C
| D%%%%%%B###### @E@@@@@@ %%%D%%%@@@E@@@@@@E
21 E@@@@@@E@@@@@@F&&&@@@E@@@&&&D%%%%%%B######B######B######B######B######B
+ E@@@ F&&& + E@ + F&&& + +
20 ++------------+-------------+-------------+-------------+------------++
14 16 18 20 22 24
log2 number of buckets
Host: Intel i7-4790K
14.5 ++------------+------------+-------------+------------+------------++
A** + + + master **A*** +
14 ++ ** xxhash ##B###++
13.5 ++ ** xxhash-rcu $$C$$$++
| qht-fixed-nomru %%D%%% |
13 ++ A****** qht-dyn-mru @@E@@@++
| A*****A******A****** qht-dyn-nomru &&F&&& |
12.5 C$$ A******A******A*****A****** ***A
12 ++ $$ A*** ++
D%%% $$ |
11.5 ++ %% ++
B### %C$$$$$$ |
11 ++ ## D%%%%% C$$$$$ ++
| # % C$$$$$$ |
10.5 F&&&&&&B######D%%%%% C$$$$$$C$$$$$$C$$$$$$C$$$$$C$$$$$$ $$$C
10 E@@@@@@E@@@@@@B#####B######B######E@@@@@@E@@@%%%D%%%%%D%%%###B######B
+ F&& D%%%%%%B######B######B#####B###@@@D%%% +
9.5 ++------------+------------+-------------+------------+------------++
14 16 18 20 22 24
log2 number of buckets
Note that the original point before this patch series is X=15 for "master";
the little sensitivity to the increased number of buckets is due to the
poor hashing function in master.
xxhash-rcu has significant overhead due to the constant churn of allocating
and deallocating intermediate structs for implementing MRU. An alternative
would be do consider failed lookups as "maybe not there", and then
acquire the external lock (tb_lock in this case) to really confirm that
there was indeed a failed lookup. This, however, would not be enough
to implement dynamic resizing--this is more complex: see
"Resizable, Scalable, Concurrent Hash Tables via Relativistic
Programming" by Triplett, McKenney and Walpole. This solution was
discarded due to the very coarse RCU read critical sections that we have
in MTTCG; resizing requires waiting for readers after every pointer update,
and resizes require many pointer updates, so this would quickly become
prohibitive.
qht-fixed-nomru shows that MRU promotion is advisable for undersized
hash tables.
However, qht-dyn-mru shows that MRU promotion is not important if the
hash table is properly sized: there is virtually no difference in
performance between qht-dyn-nomru and qht-dyn-mru.
Before this patch, we're at X=15 on "xxhash"; after this patch, we're at
X=15 @ qht-dyn-nomru. This patch thus matches the best performance that we
can achieve with optimum sizing of the hash table, while keeping the hash
table scalable for readers.
The improvement we get before and after this patch for booting debian jessie
with arm-softmmu is:
- Intel Xeon E5-2690: 10.5% less time
- Intel i7-4790K: 5.2% less time
We could get this same improvement _for this particular workload_ by
statically increasing the size of the hash table. But this would hurt
workloads that do not need a large hash table. The dynamic (upward)
resizing allows us to start small and enlarge the hash table as needed.
A quick note on downsizing: the table is resized back to 2**15 buckets
on every tb_flush; this makes sense because it is not guaranteed that the
table will reach the same number of TBs later on (e.g. most bootup code is
thrown away after boot); it makes sense to grow the hash table as
more code blocks are translated. This also avoids the complication of
having to build downsizing hysteresis logic into qht.
Reviewed-by: Sergey Fedorov <serge.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1465412133-3029-15-git-send-email-cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The function cpu_resume_from_signal() is now always called with a
NULL puc argument, and is rather misnamed since it is never called
from a signal handler. It is essentially forcing an exit to the
top level cpu loop but without raising any exception, so rename
it to cpu_loop_exit_noexc() and drop the useless unused argument.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Message-id: 1463494687-25947-4-git-send-email-peter.maydell@linaro.org
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG backends do not need most of exec-all.h; extract what they actually
need to a separate file or move it directly to tcg.h. The next patch
will stop including exec-all.h from everywhere.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'tb_invalidated_flag' was meant to catch two events:
* some TB has been invalidated by tb_phys_invalidate();
* the whole translation buffer has been flushed by tb_flush().
Then it was checked:
* in cpu_exec() to ensure that the last executed TB can be safely
linked to directly call the next one;
* in cpu_exec_nocache() to decide if the original TB should be provided
for further possible invalidation along with the temporarily
generated TB.
It is always safe to patch an invalidated TB since it is not going to be
used anyway. It is also safe to call tb_phys_invalidate() for an already
invalidated TB. Thus, setting this flag in tb_phys_invalidate() is
simply unnecessary. Moreover, it can prevent from pretty proper linking
of TBs, if any arbitrary TB has been invalidated. So just don't touch it
in tb_phys_invalidate().
If this flag is only used to catch whether tb_flush() has been called
then rename it to 'tb_flushed'. Declare it as 'bool' and stick to using
only 'true' and 'false' to set its value. Also, instead of setting it in
tb_gen_code(), just after tb_flush() has been called, do it right inside
of tb_flush().
In cpu_exec(), this flag is used to track if tb_flush() has been called
and have made 'next_tb' (a reference to the last executed TB) invalid
for linking it to directly call the next TB. tb_flush() can be called
during the CPU execution loop from tb_gen_code(), during TB execution or
by another thread while 'tb_lock' is released. Catch for translation
buffer flush reliably by resetting this flag once before first TB lookup
and each time we find it set before trying to add a direct jump. Don't
touch in in tb_find_physical().
Each vCPU has its own execution loop in multithreaded mode and thus
should have its own copy of the flag to be able to reset it with its own
'next_tb' and don't affect any other vCPU execution thread. So make this
flag per-vCPU and move it to CPUState.
In cpu_exec_nocache(), we only need to check if tb_flush() has been
called from tb_gen_code() called by cpu_exec_nocache() itself. To do
this reliably, preserve the old value of the flag, reset it before
calling tb_gen_code(), check afterwards, and combine the saved value
back to the flag.
This patch is based on the patch "tcg: move tb_invalidated_flag to
CPUState" from Paolo Bonzini <pbonzini@redhat.com>.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The check is to make sure that another thread hasn't already done the
same while we were outside of tb_lock. Mention this in a comment.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
These fields do not contain pure pointers to a TranslationBlock
structure. So uintptr_t is the most appropriate type for them.
Also put some asserts to assure that the two least significant bits of
the pointer are always zero before assigning it to jmp_list_first.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Briefly describe in a comment how direct block chaining is done. It
should help in understanding of the following data fields.
Rename some fields in TranslationBlock and TCGContext structures to
better reflect their purpose (dropping excessive 'tb_' prefix in
TranslationBlock but keeping it in TCGContext):
tb_next_offset => jmp_reset_offset
tb_jmp_offset => jmp_insn_offset
tb_next => jmp_target_addr
jmp_next => jmp_list_next
jmp_first => jmp_list_first
Avoid using a magic constant as an invalid offset which is used to
indicate that there's no n-th jump generated.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in ARM is atomic by using
atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-8-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in s390 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-7-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in i386 is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() for code patching.
tcg_out_nopn() implementation:
Suggested-by: Richard Henderson <rth@twiddle.net>.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-6-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ensure direct jump patching in TCI is atomic by:
* naturally aligning a location of direct jump address;
* using atomic_read()/atomic_set() to load/store the address.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Message-Id: <1461341333-19646-4-git-send-email-sergey.fedorov@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We are inconsistent with the type of tb->flags: usage varies loosely
between int and uint64_t. Settle to uint32_t everywhere, which is
superior to both: at least one target (aarch64) uses the most significant
bit in the u32, and uint64_t is wasteful.
Compile-tested for all targets.
Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
This ensures the code generation debug code will honour -dfilter if set.
For the "exec" tracing I've added a new inline macro for efficiency's
sake.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aureL32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1458052224-9316-8-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve the TB execution logging so that it is easier to identify
what is happening from trace logs:
* move the "Trace" logging of executed TBs into cpu_tb_exec()
so that it is emitted if and only if we actually execute a TB,
and for consistency for the CPU state logging
* log when we link two TBs together via tb_add_jump()
* log when cpu_tb_exec() returns early from a chain of TBs
The new style logging looks like this:
Trace 0x7fb7cc822ca0 [ffffffc0000dce00]
Linking TBs 0x7fb7cc822ca0 [ffffffc0000dce00] index 0 -> 0x7fb7cc823110 [ffffffc0000dce10]
Trace 0x7fb7cc823110 [ffffffc0000dce10]
Trace 0x7fb7cc823420 [ffffffc000302688]
Trace 0x7fb7cc8234a0 [ffffffc000302698]
Trace 0x7fb7cc823520 [ffffffc0003026a4]
Trace 0x7fb7cc823560 [ffffffc0000dce44]
Linking TBs 0x7fb7cc823560 [ffffffc0000dce44] index 1 -> 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc8235d0 [ffffffc0000dce70]
Stopped execution of TB chain before 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc8235d0 [ffffffc0000dce70]
Trace 0x7fb7cc822fd0 [ffffffc0000dd52c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[AJB: reword patch title, Abandoned->Stopped]
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1458052224-9316-6-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a function to return the AddressSpace for a CPU based on
its numerical index. (Callers outside exec.c don't have access
to the CPUAddressSpace struct so can't just fish it out of the
CPUState struct directly.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Pass the MemTxAttrs for the memory access to iotlb_to_region(); this
allows it to determine the correct AddressSpace to use for the lookup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
When looking up the MemoryRegionSection for the new TLB entry in
tlb_set_page_with_attrs(), use cpu_asidx_from_attrs() to determine
the correct address space index for the lookup, and pass it into
address_space_translate_for_iotlb().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add documentation comments for tlb_set_page_with_attrs()
and tlb_set_page().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Allow multiple calls to cpu_address_space_init(); each
call adds an entry to the cpu->ases array at the specified
index. It is up to the target-specific CPU code to actually use
these extra address spaces.
Since this multiple AddressSpace support won't work with
KVM, add an assertion to avoid confusing failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Rather than setting cpu->as unconditionally in cpu_exec_init
(and then having target-i386 override this later), don't set
it until the first call to cpu_address_space_init.
This requires us to initialise the address space for
both TCG and KVM (KVM doesn't need the AS listener but
it does require cpu->as to be set).
For target CPUs which don't set up any address spaces (currently
everything except i386), add the default address_space_memory
in qemu_init_vcpu().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The HOST_PAGE_ALIGN macros don't work until the page size variables
have been set up; later in postcopy I use those macros in the RAM
code, and it can be triggered using -object.
Fix this by initialising page_size_init() earlier - it's currently
initialised inside the accelerators, move it up into vl.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch is required for deterministic replay to generate an exception
by trying executing an instruction without changing icount.
It adds new flag to TB for disabling icount while translating it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162359.8676.77011.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The header is included from basically everywhere, thanks to cpu.h.
It should be moved to the (TCG only) files that actually need it.
As a start, remove non-TCG stuff.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Gather up all the fields currently in CPUState which deal with the CPU's
AddressSpace into a separate CPUAddressSpace struct. This paves the way
for allowing the CPU to know about more than one AddressSpace.
The rearrangement also allows us to make the MemoryListener a directly
embedded object in the CPUAddressSpace (it could not be embedded in
CPUState because 'struct MemoryListener' isn't defined for the user-only
builds). This allows us to resolve the FIXME in tcg_commit() by going
directly from the MemoryListener to the CPUAddressSpace.
This patch extracts the actual update of the cached dispatch pointer
from cpu_reload_memory_map() (which is renamed accordingly to
cpu_reloading_memory_map() as it is only responsible for breaking
cpu-exec.c's RCU critical section now). This lets us keep the definition
of the CPUAddressSpace struct private to exec.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1443709790-25180-4-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At present, the "average" guestimate of TB size is way too small, leading
to many unused entries in the pre-allocated TB array. For a guest with 1GB
ram, we're currently allocating 256MB for the array.
Survey arm, alpha, aarch64, ppc, sparc, i686, x86_64 guests running on
x86_64 and ppc64 hosts and select a new average. The size of the array
drops to 81MB with no more flushing than before.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We currently pre-compute an worst case code size for any TB, which
works out to be 122kB. Since the average TB size is near 1kB, this
wastes quite a lot of storage.
Instead, check for overflow in between generating code for each opcode.
The overhead of the check isn't measurable and wastage is minimized.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We can now restore state without retranslation.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments. Transition restore_state_to_opc to use
data from the latter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As it's only caller, this tidies things a bit.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Move the architecture agnostic function prototypes for exec.c out of
cputlb.h to exec-all.h. This allows hiding of the arch specific
cputlb.h from exec.c which should be getting close to having no
architecture specifics. Prepares support for multi-arch, which will have
a minimal cpu.h that services exec.c but not cputlb.h.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <b4fe754c58c860315e35d44430c26b1c967ce2c9.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There is some iffy lock hierarchy going on in translate-all.c. To
fix it, we need to take the mmap_lock in cpu-exec.c. Make the
functions globally available.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spinlock is only used in two cases:
* cpu-exec.c: to protect TranslationBlock
* mem_helper.c: for lock helper in target-i386 (which seems broken).
It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef. The #ifdef will be removed when multithreaded TCG
will need the mutex as well.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signals are slow and do not exist on Win32. The previous patches
have done most of the legwork to introduce memory barriers (some
of them were even there already for the sake of Windows!) and
we can now set the flags directly in the iothread.
qemu_cpu_kick_thread is not used anymore on TCG, since the TCG thread is
never outside usermode while the CPU is running (not halted). Instead run
the content of the signal handler (now in qemu_cpu_kick_no_halt) directly.
qemu_cpu_kick_no_halt is also used in qemu_mutex_lock_iothread to avoid
the overhead of qemu_cond_broadcast.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is already useful on Windows in order to remove tls.h, because
accesses to current_cpu are done from a different thread on that
platform. It will be used on POSIX platforms as soon TCG stops using
signals to interrupt the execution of translated code.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This subtraction of return addresses applies directly to TCI as well as
host-TCG. This fixes Linux boots for at least Microblaze, CRIS, ARM and
SH4 when using TCI.
[sw: Removed indentation for preprocessor statement]
[sw: The patch also fixes Linux boot for x86_64]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Guest CPU TLB maintenance operations may be sufficiently
specialized to only need to flush TLB entries corresponding
to a particular MMU index. Implement cputlb functions for
this, to avoid the inefficiency of flushing TLB entries
which we don't need to.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-2-git-send-email-peter.maydell@linaro.org
After commit 626cf8f (icount: set can_do_io outside TB execution,
2014-12-08), can_do_io is set to 1 if not executing code. It is
no longer necessary to make this assumption in cpu_can_do_io.
It is also possible to remove the use_icount test, simply by
never setting cpu->can_do_io to 0 unless use_icount is true.
With these changes cpu_can_do_io boils down to a read of
cpu->can_do_io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of invalidating an original TB in cpu_exec_nocache()
prematurely, just save a link to it in the temporary generated TB. If
cpu_io_recompile() is raised subsequently from the temporary TB,
invalidate the original one as well. That allows reusing the original TB
each time cpu_exec_nocache() is called to handle expired instruction
counter in icount mode.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-Id: <1435656909-29116-1-git-send-email-serge.fdrv@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The callers (most of them in target-foo/cpu.c) to this function all
have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from
core code (in exec.c).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add an Error argument to cpu_exec_init() to let users collect the
error. This is in preparation to change the CPU enumeration logic
in cpu_exec_init(). With the new enumeration logic, cpu_exec_init()
can fail if cpu_index values corresponding to max_cpus have already
been handed out.
Since all current callers of cpu_exec_init() are from instance_init,
use error_abort Error argument to abort in case of an error.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prevously, if we hotplug a device(e.g. device_add e1000) during
migration is processing in source side, qemu will add a new ram
block but migration_bitmap is not extended.
In this case, migration_bitmap will overflow and lead qemu abort
unexpectedly.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is one of very few things in exec-all with a genuine CPU
architecture dependency. Move these hashing helpers to a new
header to trim exec-all.h down to a near architecture-agnostic
header.
The defs are only used by cpu-exec and translate-all which are both
arch-obj's so the new tb-hash.h has no core code usage.
Reviewed-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <9d048b96f7cfa64a4d9c0b88e0dd2877fac51d41.1433052532.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probe for whether the specified guest write access is permitted.
If it is not permitted then an exception will be taken in the same
way as if this were a real write access (and we will not return).
Otherwise the function will return, and there will be a valid
entry in the TLB for this access.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove them from the sundry exec-all.h header, since they are only used by
the TCG runtime in exec.c and user-exec.c.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a MemTxAttrs field to the IOTLB, and allow target-specific
code to set it via a new tlb_set_page_with_attrs() function;
pass the attributes through to the device when making IO accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rather than retaining io_mem_read/write as simple wrappers around
the memory_region_dispatch_read/write functions, make the latter
public and change all the callers to use them, since we need to
touch all the callsites anyway to add MemTxAttrs and MemTxResult
support. Delete io_mem_read and io_mem_write entirely.
(All the callers currently pass MEMTXATTRS_UNSPECIFIED
and convert the return value back to bool or ignore it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Note that even after this patch, most callers of address_space_*
functions must still be under the big QEMU lock, otherwise the memory
region returned by address_space_translate can disappear as soon as
address_space_translate returns. This will be fixed in the next part
of this series.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the previous patch, TLBs will be flushed on every change to
the memory mapping. This patch augments that with synchronization
of the MemoryRegionSections referred to in the iotlb array.
With this change, it is guaranteed that iotlb_to_region will access
the correct memory map, even once the TLB will be accessed outside
the BQL.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This for now is a simple TLB flush. This can change later for two
reasons:
1) an AddressSpaceDispatch will be cached in the CPUState object
2) it will not be possible to do tlb_flush once the TCG-generated code
runs outside the BQL.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In this case, QEMU might longjmp out of cpu-exec.c and miss the final
cleanup in cpu_exec_nocache. Do this manually through a new compile
flag.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
