This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
The facility to use/unuse vectors dynamically is helpful
for virtio but little else: everyone just seems to use
vectors in their init function.
Avoid clearing msix vector use info on reset and load.
For virtio, clear it explicitly.
This should fix regressions reported with ivshmem - though
I didn't test this, I verified that virtio keeps
working like it did.
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use g_strdup_printf() instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Added (msi|msix)_set_message() function for whoever might
want to use them.
Currently msi_notify()/msix_notify() write to these vectors to
signal the guest about an interrupt so the correct values have to
written there by the guest or QEMU.
For example, POWER guest never initializes MSI/MSIX vectors, instead
it uses RTAS hypercalls. So in order to support MSIX for virtio-pci on
POWER we have to initialize MSI/MSIX message from QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Finally, complete the fully specified interface. msix_add_config()
gets folded into msix_init() because we now have quite a few parameters
to pass and rolling it in let's us error earlier, avoiding the ugly
unwind exit path. msix_mmio_setup() also gets rolled in, just because
it's redundant to rediscover offsets when we already have them for
such a tiny function.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These don't have to be contiguous. Size them to only what
they need and use separate MemoryRegions for the vector
table and PBA.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MSIX, like PCI, is little endian. Specifying native is wrong here,
but we need to check the rest of the file to determine if it's
as simple as flipping this macro.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
What's this doing so far from msix_mmio_ops?
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msi_init() takes over a BAR without really specifying or allowing
specification of how it does so. Instead, let's split it into
two interfaces, one fully specified, and one trivially easy. This
implements the latter. msix_init_exclusive_bar() takes over
allocating and filling a PCI BAR _exclusively_ for the use of MSIX.
When used, the matching msi_uninit_exclusive_bar() should be used
to tear it down.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No user in sight for msix_bar_size.
bar_size for all users is aligned, let's simply
require this instead of trying to fix up invalid input.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Terminate msi/msix_write_config early if support is not enabled. This
allows to remove checks at the caller site if MSI is optional.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Analogously to msi_nr_vectors_allocated, add a service for MSI-X. Will
be used by the virtio-pci layer.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Vector notifiers shall be triggered by the MSI/MSI-X core whenever a
relevant configuration change is programmed by the guest. In case of
MSI-X, changes are reported when the effective mask (global &&
per-vector) alters its state. On unmask, the current vector
configuration is included in the event report. This allows users - e.g.
virtio-pci layer - to transfer this information to external MSI-X
routing subsystems - like vhost + KVM in-kernel irqchip.
This implementation only provides MSI-X support, but extension to MSI is
feasible and will be provided later on when adding support for KVM PCI
device assignment.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In preparation of firing vector notifiers on mask changes, call
msix_handle_mask_update also from msix_mask_all. So far, this will have
no real effect.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This helper will also be used by the upcoming config notifier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Rename msix_supported to msi_supported and control MSI and MSI-X
activation this way. That was likely to original intention for this
flag, but MSI support came after MSI-X.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check pending bit only if vector mask status changed.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
>From: Jan Kiszka <jan.kiszka@siemens.com>
Only accesses to the MSI-X table must trigger a call to
msix_handle_mask_update, otherwise the vector
value might be out of range.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only go over the table when function is masked.
This is not really important for qemu.git but helps
fix a bug in qemu-kvm.git.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The msix table is defined as a subregion, to allow for a BAR that
mixes device specific regions with the msix table.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also cleans up an open-coded 64-bit message address readout.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.
This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
clear not only INTA, but all INTx when MSI-X is enabled.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
By making pci_add_capability() the special case of
pci_add_capability_at_offset() of offset = 0,
consolidate pci_add_capability_at_offset() into pci_add_capability().
Cc: Stefan Weil <weil@mail.berlios.de>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove unused DEBUG defines from hw/msix.c to avoid having anything
define the word DEBUG without any additions such as MSIX_DEBUG.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
remove defines which are already defined in pci_regs.h
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use range helper function in msix_write_config().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Function mask is a mandatory feature in MSIX
spec so not implementing it is a spec violation.
Implement.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
rename ENABLE_OFFSET -> CONTROL_OFFSET, since
same byte includes function mask.
This is in preparation for function mask support.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI spec states:
if a masked vector has its Pending bit set, and the associated
underlying interrupt events are somehow satisfied (usually by software
though the exact manner is function-specific), the function must clear
the Pending bit, to avoid sending a spurious interrupt message later
when software unmasks the vector.
In our case this happens if vector becomes unused.
Clear pending bit in this case.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On reset, we currently clear all bits in msix control register *except*
enable bit. This is wrong: the spec says we should clear writeable
bits: function mask and enable bit.
Correct this.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes a couple of issues with msix table access:
- With misbehaving guests, misaligned 4 byte access could overflow
msix table and cause qemu to segfault. Since PCI spec requires
host to only issue dword-aligned accesses, as a fix,
it's enough to mask the address low bits.
- Tables use pci format, not native format, and so
we must use pci_[sg]et_long on read/write.
Reported-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since cpu_register_phys_memory does not require size to be a multiple of
target page size, simply make msix page size 0x1000. Do this in msix,
reverting part of 5e520a7d50, as we no
longer have to pass target page around.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
