Commit Graph

123 Commits

Author SHA1 Message Date
Paolo Bonzini 41063e1e7a exec: move rcu_read_lock/unlock to address_space_translate callers
Once address_space_translate will be called outside the BQL, the returned
MemoryRegion might disappear as soon as the RCU read-side critical section
ends.  Avoid this by moving the critical section to the callers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1426684909-95030-3-git-send-email-pbonzini@redhat.com>
2015-04-30 16:55:32 +02:00
Emilio G. Cota 510a647fa2 translate-all: use bitmap helpers for PageDesc's bitmap
Here we have an open-coded byte-based bitmap implementation.
Get rid of it since there's a ulong-based implementation to be
used by all code.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-28 22:14:14 +02:00
Emilio G. Cota e3a0abfda7 translate-all: use glib for all page descriptor allocations
Since commit

  b7b5233a "bsd-user/mmap.c: Don't try to override g_malloc/g_free"

the exception we make here for usermode has been unnecessary.
Get rid of it.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1428610053-26148-1-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-27 18:24:17 +02:00
Emilio G. Cota 9c04146ad4 target-i386: remove superfluous TARGET_HAS_SMC macro
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-04 09:45:59 +03:00
Markus Armbruster 8b98ade31e translate-all: Use g_try_malloc() for dynamic translator buffer
The USE_MMAP code can fail, and the caller handles the failure
already.  Let the !USE_MMAP code fail as well, for consistency.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:21 +03:00
Peter Maydell ec53b45bcd exec.c: Drop TARGET_HAS_ICE define and checks
The TARGET_HAS_ICE #define is intended to indicate whether a target-*
guest CPU implementation supports the breakpoint handling. However,
all our guest CPUs have that support (the only two which do not
define TARGET_HAS_ICE are unicore32 and openrisc, and in both those
cases the bp support is present and the lack of the #define is just
a bug). So remove the #define entirely: all new guest CPU support
should include breakpoint handling as part of the basic implementation.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-20 15:19:32 +00:00
SeokYeon Hwang 2d8ac5eb7a translate-all: Mark map_exec() with the 'unused' attribute
Mark map_exec() with the 'unused' attribute to avoid '-Wunused-function'
warnings on clang 3.4 or later. This means we don't need to mark it
'inline', which is what we were previously using to suppress the warning
(a trick which only works with gcc, not clang).

Signed-off-by: SeokYeon Hwang <syeon.hwang@samsung.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[PMM: tweaked comment message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-01-15 10:44:13 +03:00
Paolo Bonzini bd79255d25 translate: check cflags instead of use_icount global
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03 09:22:10 +01:00
Paolo Bonzini 0266359e57 cpu-exec: add a new CF_USE_ICOUNT cflag
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-23 10:14:53 +01:00
Peter Maydell 86b182ac0e Xtensa updates for 2.3:
- fix cross-page opcode handling;
 - move window overflow exception generation decision to translation phase;
 - don't generate dead code after privilege, window overflow or coprocessor
   exception;
 - add monitor command 'info opcount' for dumping TCG opcode counters.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUkPD9AAoJEFH5zJH4P6BE7BQP/jYFMY1+52A99Iwwwf+RpCjA
 Bt5sH6csHlZS+95xI5uuSzaNDjwtzgsJlKdB43e4FtHqRdkPH7p/iFvqAMZW/hJM
 nsx5Hm7LeUM3Ox16o01EZE8HUEMo045RU8Gdt1V6qWRGhskaXgZ756p7zI8R9CrQ
 zKuvie0HMIGa6W126hodvu4paQ9yu49dZt2qrO5DlLujZeYH5OpQeoGs06gV4yb7
 G/A1hQSDSWOl0vyFH9P+zPyB7GLQOvCvokSPbDLoYlnKassYPCELtYILdV1fkgXn
 Nb0Xuv/SktEuEmJf8s6lFa8UOZPOWNsjAO4SY74Z7rR8EGLyCJj+damUdmtlpKDc
 ihysj048UCpWZDU952xWeQisrsoyBQ0Cbste7364Hdm+P0zhslEAX2mKEDzqTIff
 nfHBMvMjqdsmSsgMBGLkcY5Fdrgz0HP1J2JFtFZI0Wh9X8HvQcEuDtwpjZN5WRlu
 LEIp2bI0S1Lyy5I7Okr12m7g4tpFKyzNmw42wPyl6YVpSfT20ErCDFfZL4Wnu88B
 +Be/QlX4AAPpD1paRYyI0yyJvO+bFmcv5bejH3GrGXm1MGo9DSumGIxiHmCYCo4l
 z55/RLdujRxlwnDhOTruIei9gF+BnsQK6WR3f0yIjVZwtzKIe4BaLjqKOad/9INA
 VhrOyDE33GibpFYUygCI
 =quXp
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/xtensa/tags/20141217-xtensa' into staging

Xtensa updates for 2.3:

- fix cross-page opcode handling;
- move window overflow exception generation decision to translation phase;
- don't generate dead code after privilege, window overflow or coprocessor
  exception;
- add monitor command 'info opcount' for dumping TCG opcode counters.

# gpg: Signature made Wed 17 Dec 2014 02:57:01 GMT using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"

* remotes/xtensa/tags/20141217-xtensa:
  target-xtensa: don't generate dead code
  target-xtensa: record available window in TB flags
  target-xtensa: test cross-page opcode
  target-xtensa: fix translation for opcodes crossing page boundary
  tcg: add separate monitor command to dump opcode counters

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-17 17:31:26 +00:00
Max Filippov 246ae24d7d tcg: add separate monitor command to dump opcode counters
Currently 'info jit' outputs half of the information to monitor and the
rest to qemu log. Dumping opcode counts to monitor as a part of 'info
jit' command doesn't sound useful. Add new monitor command 'info
opcount' that only dumps opcode counters.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2014-12-17 05:49:32 +03:00
Maciej W. Rozycki c357747981 target-mips: Correct MIPS16/microMIPS branch size calculation
Correct MIPS16/microMIPS branch size calculation in PC adjustment
needed:

- to set the value of CP0.ErrorEPC at the entry to the reset exception,

- for the purpose of branch reexecution in the context of device I/O.

Follow the approach taken in `exception_resume_pc' for ordinary, Debug
and NMI exceptions.

MIPS16 and microMIPS branches can be 2 or 4 bytes in size and that has
to be reflected in calculation.  Original MIPS ISA branches, which is
where this code originates from, are always 4 bytes long, just as all
original MIPS ISA instructions.

Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16 12:45:19 +00:00
Pavel Dovgalyuk d8a499f17e cpu-exec: invalidate nocache translation if they are interrupted
In this case, QEMU might longjmp out of cpu-exec.c and miss the final
cleanup in cpu_exec_nocache.  Do this manually through a new compile
flag.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 12:21:02 +01:00
Mikhail Ilyin 1a1c4db9b2 translate-all.c: memory walker initial address miscalculation
The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.

Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-10-06 21:53:35 +03:00
Alex Bennée 6db8b53866 trace: add some tcg tracing support
This adds a couple of tcg specific trace-events which are useful for
tracing execution though tcg generated blocks. It's been tested with
lttng user space tracing but is generic enough for all systems. The tcg
events are:

  * translate_block - when a subject block is translated
  * exec_tb - when a translated block is entered
  * exec_tb_exit - when we exit the translated code
  * exec_tb_nocache - special case translations

Of course we can only trace the entrance to the first block of a chain
as each block will jump directly to the next when it can. See the -d
nochain patch to allow more complete tracing at the expense of
performance.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-12 14:26:12 +01:00
Stefan Weil 5d831be272 Fix new typos (found by codespell)
* accomodate -> accommodate
* aquiring -> acquiring
* beacuse -> because
* loosing -> losing
* prefering -> preferring
* threshhold -> threshold

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-24 20:01:24 +04:00
Paolo Bonzini 38183310be memory: move preallocation code out of exec.c
So that backends can use it.

Since we need the page size for efficiency, move code to compute it
out of translate-all.c and into util/oslib-win32.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 18:44:19 +03:00
Richard Henderson 483c76e140 tcg-mips: Constrain the code_gen_buffer to be within one 256mb segment
This assures us use of J for exit_tb and goto_tb, and JAL for calling
into the generated bswap helpers.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24 08:45:00 -07:00
Richard Henderson 479eb12108 tcg-mips: Layout executable and code_gen_buffer
Choosing good addresses for them means we can use JAL for helper calls.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-24 08:44:44 -07:00
Richard Henderson 1813e1758d tcg: Define tcg_insn_unit for code pointers
To be defined by the tcg backend based on the elemental unit of the ISA.
During the transition, allow TCG_TARGET_INSN_UNIT_SIZE to be undefined,
which allows us to default tcg_insn_unit to the current uint8_t.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12 10:03:04 -07:00
Andrei Warkentin cd7ccc8351 page_check_range: don't bail out early after unprotecting page
When checking a page range, if we found that a page was
made read-only by QEMU because it contained translated code,
we were incorrectly returning immediately after unprotecting
that page, rather than continuing to check the entire range,
so we might fail to unprotect pages later in the range, or
might incorrectly return a "success" result even if later
pages were not writable.

In particular, this could cause segfaults in a case where
signals are delivered back to back on a target architecture
which uses trampoline code in the stack frame (as AArch64
currently does). The second signal causes a segfault because
the frame cannot be written to (it was protected because
we translated and executed the restorer trampoline, and the
unprotect logic did not unprotect the whole range).

Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com
[PMM: expanded commit message a bit]
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-04 18:16:03 +01:00
Andreas Färber a47dddd734 exec: Change cpu_abort() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:52:28 +01:00
Andreas Färber baea4fae7b cputlb: Change tlb_unprotect_code_phys() argument to CPUState
Note that the argument is unused.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 0ea8cb8895 cpu-exec: Change cpu_resume_from_signal() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 611d4f996f translate-all: Change tb_flush_jmp_cache() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 648f034c6c translate-all: Change tb_gen_code() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 90b40a696a translate-all: Change cpu_io_recompile() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 239c51a54f translate-all: Change tb_check_watchpoint() argument to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:48 +01:00
Andreas Färber 74f10515d1 translate-all: Change cpu_restore_state_from_tb() argument to CPUState
And normalize the argument order.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:47 +01:00
Andreas Färber 3f38f309b2 translate-all: Change cpu_restore_state() argument to CPUState
This lets us drop some local variables in tlb_fill() functions.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:47 +01:00
Andreas Färber 8cd70437f3 cpu: Move tb_jmp_cache field from CPU_COMMON to CPUState
Clear it on reset.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Andreas Färber 28ecfd7a62 cpu: Move icount_decr field from CPU_COMMON to CPUState
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Andreas Färber 99df7dce8a cpu: Move can_do_io field from CPU_COMMON to CPUState
Rename can_do_io() to cpu_can_do_io() and change argument to CPUState.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Andreas Färber 93afeade09 cpu: Move mem_io_{pc,vaddr} fields from CPU_COMMON to CPUState
Reset them.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13 19:20:46 +01:00
Edgar E. Iglesias 29d8ec7bee exec: Make tb_invalidate_phys_addr input an AS
No functional change.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11 22:55:55 +10:00
Alexey Kardashevskiy 47c16ed56a kvm: initialize qemu_host_page_size
There is a HOST_PAGE_ALIGN macro which makes sense for KVM accelerator
but it uses qemu_host_page_size/qemu_host_page_mask which initialized
for TCG only.

This moves qemu_host_page_size/qemu_host_page_mask initialization from
TCG's page_init() and adds a call for it from kvm_init().

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-01-17 11:12:07 -07:00
Richard Henderson eb2535f411 cputlb: Tidy memset() of arrays
Don't duplicate the array length computation in the memset()
when plain sizeof() can produce the correct results.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 15:32:36 +01:00
Paolo Bonzini 03f4995781 split definitions for exec.c and translate-all.c radix trees
The exec.c and translate-all.c radix trees are quite different, and
the exec.c one in particular is not limited to the CPU---it can be
used also by devices that do DMA, and in that case the address space
is not limited to TARGET_PHYS_ADDR_SPACE_BITS bits.

We want to make exec.c's radix trees 64-bit wide.  As a first step,
stop sharing the constants between exec.c and translate-all.c.
exec.c gets P_L2_* constants, translate-all.c gets V_L2_*, for
consistency with the existing V_L1_* symbols.  Though actually
in the softmmu case translate-all.c is also indexed by physical
addresses...

This patch has no semantic change.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10 12:29:56 +02:00
Richard Henderson dbdbe0cd31 exec: Delete is_tcg_gen_code and GETRA_EXT
All implementations now boil down to GETRA.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10 11:44:25 -07:00
Stefan Weil 227b8175e2 translate-all: Fix formatting of dump output
The page dump writes a table with 3 abi_ulong values in each row.
These values take 8 or 16 characters (depending on sizeof abi_ulong).

Fix the table headings to be aligned with the table columns.

old:
start    end      size     prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-

new:
start            end              size             prot
0000000120000000-000000012021e000 000000000021e000 rwx
0000004000000000-0000004000002000 0000000000002000 ---
0000004000002000-0000004000802000 0000000000800000 rw-

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-20 20:09:24 +04:00
Andreas Färber bdc44640cb cpu: Use QTAILQ for CPU list
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand
macros.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03 12:25:55 +02:00
Alexander Graf d02532f08e linux-user: Unlock mmap_lock when resuming guest from page_unprotect
The page_unprotect() function is running everything locked. Before every
potential exit path of the function mmap_unlock() gets called to make sure
we don't leak the lock.

However, the function calls tb_invalidate_phys_page() which again can
exit a signal through longjmp, leaving our mmap_unlock() attempts in vain.

Add a hint to tb_invalidate_phys_page() that we need to unlock before we
can leave back into guest context, so that we don't leak the lock.

This fixes 16-bit i386 wine programs running in linux-user for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-23 17:28:28 +03:00
Andreas Färber 182735efaf cpu: Make first_cpu and next_cpu CPUState
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.

gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:32:54 +02:00
Andreas Färber 4917cf4432 cpu: Replace cpu_single_env with CPUState current_cpu
Move it to qom/cpu.h.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09 21:20:28 +02:00
Paolo Bonzini 5c8a00ce18 exec: return MemoryRegion from address_space_translate
Only address_space_translate_for_iotlb needs to return the section.
Every caller of address_space_translate now uses only section->mr,
return it directly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20 16:32:46 +02:00
Claudio Fontana 4a136e0a6b tcg/aarch64: implement new TCG target for aarch64
add preliminary support for TCG target aarch64.

Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 51A5C596.3090108@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-06-12 16:20:22 +01:00
Paolo Bonzini 149f54b53b memory: add address_space_translate
Using phys_page_find to translate an AddressSpace to a MemoryRegionSection
is unwieldy.  It requires to pass the page index rather than the address,
and later memory_region_section_addr has to be called.  Replace
memory_region_section_addr with a function that does all of it: call
phys_page_find, compute the offset within the region, and check how
big the current mapping is.  This way, a large flat region can be written
with a single lookup rather than a page at a time.

address_space_translate will also provide a single point where IOMMU
forwarding is implemented.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-29 16:26:50 +02:00
Anthony Liguori fd469df97a Merge remote-tracking branch 'bonzini/iommu-for-anthony' into staging
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
  memory: clean up phys_page_find
  memory: populate FlatView for new address spaces
  memory: limit sections in the radix tree to the actual address space size
  s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
  memory: fix address space initialization/destruction
  memory: make memory_global_sync_dirty_bitmap take an AddressSpace
  memory: do not duplicate memory_region_destructor_none
  memory: Rename readable flag to romd_mode
  memory: Replace open-coded memory_region_is_romd
  memory: allow memory_region_find() to run on non-root memory regions
  memory: assert that PhysPageEntry's ptr does not overflow
  exec: eliminate stq_phys_notdirty
  exec: make qemu_get_ram_ptr private
  exec: eliminate qemu_put_ram_ptr
  exec: remove obsolete comment

Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-24 13:47:42 -05:00
Jan Kiszka 4b81126e33 memory: Replace open-coded memory_region_is_romd
Improves readability.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-05-24 18:42:37 +02:00
liguang 7bc9315d3a translate: remove redundantly included qemu/timer.h
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-By: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-18 16:35:12 +04:00