Also convert blk_truncate() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-17-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-13-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert blk_pwrite_compressed() into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-12-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Also convert it into a generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-10-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement blk_preadv_part() using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-9-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Implement them using generated_co_wrapper.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-8-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
For consistency with other I/O functions, and in preparation to
implement it using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes; @@
- blk_pread(blk, offset, buf, bytes)
+ blk_pread(blk, offset, buf, bytes, 0)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-3-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Message-Id: <20220705161527.1054072-2-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
In certain container environments we may not have FUSE at all, so skip
the test in this circumstance too.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220616142659.3184115-3-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fixes: 58a6fdcc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220616142659.3184115-2-jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
The few callers that rely on the previous behavior are adjusted
accordingly by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-4-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Declare that we need copy-before-write filter to avoid failure when
filter is not whitelisted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220706170834.242277-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
strerror() represents ETIMEDOUT a bit different in Linux and macOS /
FreeBSD. Let's support the latter too.
Fixes: 9d05a87b77 ("iotests: copy-before-write: add cases for cbw-timeout option")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705153708.186418-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add mffsce test to check both the return value and the new fpscr
stored in the cpu.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220629162904.105060-8-victor.colombo@eldorado.org.br>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The different migration test cases are using a variety of settings
to ensure convergance/non-convergance. Introduce two helpers to
extra the common functionality and ensure consistency.
* Non-convergance: 1ms downtime, 30mbs bandwidth
* Convergance: 30s downtime, 1gbs bandwidth
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220628105434.295905-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While 1 second might be enough to converge migration on a fast host,
this is not guaranteed, especially if using TLS in the tests without
hardware accelerated crypto available.
Increasing the downtime to 30 seconds should guarantee it can converge
in any sane scenario.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When moving into the convergance phase, the precopy tests will first
look for a STOP event and once found will look for migration completion
status. If the test VM is not converging, the test suite will be waiting
for the STOP event forever. If we wait for the migration completion
status first, then we will trigger the previously added timeout and
prevent the test hanging forever.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-3-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the wait_for_migration_fail and wait_for_migration_complete
functions will spin in an infinite loop checking query-migrate status
to detect a specific change/goal. This is fine when everything goes
to plan, but when the unusual happens, these will hang the test suite
forever.
Any normally executing migration test case normally takes < 1 second
for a state change, with exception of the autoconverge test which
takes about 5 seconds. Taking into account possibility of people
running tests inside TCG, allowing a factor of x20 slowdown gives
a reasonable worst case of 120 seconds. Anything taking longer than
this is a strong sign that the test has hung, or the test should be
rewritten to be faster.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220628105434.295905-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Technically we don't need the TCG accelerator to run the
softfloat3 tests. However it is unlikely an interesting
build combination. Developers using softfloat3 likely use
TCG too. Similarly, developers disabling TCG shouldn't
mind much about softfloat3 tests.
This reduces a non-TCG build by 474 objects!
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204152924.6253-3-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reported by ASAN.
Fixes commit cfb34489 ("cutils: add functions for IEC and SI prefixes").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220621083420.66365-1-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.
Add a testcase for mtval via both exception paths.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add two simple test-cases: timeout failure with
break-snapshot-on-cbw-error behavior and similar with
break-guest-write-on-cbw-error behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add tests for new option of copy-before-write filter: on-cbw-error.
Note that we use QEMUMachine instead of VM class, because in further
commit we'll want to use throttling which doesn't work with -accel
qtest used by VM.
We also touch pylintrc to not break iotest 297.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: add arguments to QEMUMachine constructor]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Now that all QEMUFile callbacks are removed, the entire concept can be
deleted.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is for code which needs a portable equivalent to a QIOChannelFile
connected to /dev/null.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add an RTC device and check that the output of the hwclock command
matches the current year.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create a named I2C temperature sensor device on the command line,
instantiate device from Linux since it is not part of the device tree,
and check the temperature is correctly reported under sysfs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It's easier to run. Keep test_arm_ast2600_debian() under the
boot_linux_console.py file because it requires the extract_from_deb()
helper. We could remove it when we have tests for the AST2600.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
-----BEGIN PGP SIGNATURE-----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=3ejn
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu into staging
9pfs: fix 'Twalk' protocol violation
Actual fix is patch 5, whereas patch 4 being preparatory, all other
patches are test cases to guard this Twalk issue.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmKrDSAXHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5VgoQ//bA/lXYa6hds4f73+opq7iiJ/
# 88gnJO8uPctNWXJ5f6ufXcTFtC99QRcl97jgSQhSIUdaZCfcpg7Pq3fONc060cMt
# MNxi5Da31Fq7xz4UhSQHgWlgAfomfClYoBSOtrrxjVbXChA2rB7FXhD9aewimUtt
# TlolXdJuPbGR3F6H0glN1itij12Ay5c0DMqFPy5npYlzjNhxmPb8QgFZ8E+lxhcT
# hG+OMmS9O5Mk7WKYWC1Iij7tWm45RbThPEUsfCPt6jIJYQqheOQs0ohJG9wyCZu3
# JUCgSBPG1nNY0hgBJ/X7un7e89BoRw8edwqP+sSigfDf+LquUggqRFgz+joTbfvj
# Prq+1NTDIckDRZF6CDUSkZE3+Gq3qlIhw/2vS+bjYZrk04lP4x8d9JYPSkT3i8xc
# +YT/apDUkT68FjJ6PudfS2j6xRtYt86nOuWuhYukTZ2z5FJ0c9XAJlJX2ZS9Az3n
# AqKFCT+8UE4VYKnAJ61xDdqvAdEmKJUi5YutfuwH+j6sS4peLX0gg8mGlNi7y8JK
# bsqNjE1ve8rkp24DuUoHmivs/m1ogJi9Jxp5IjB4d26MPhgojrxOpaYUVg98QS7d
# os2ES47CSn4KFxqsFMZnZpgzKxIvRQ4C9bBbSClDOffHWHRJub6PCw5F9eCTH4dO
# z/QPJ+smDY7bolF+gSg=
# =3ejn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 16 Jun 2022 03:59:44 AM PDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20220616' of https://github.com/cschoenebeck/qemu:
tests/9pfs: check fid being unaffected in fs_walk_2nd_nonexistent
tests/9pfs: guard recent 'Twalk' behaviour fix
9pfs: fix 'Twalk' to only send error if no component walked
9pfs: refactor 'name_idx' -> 'nwalked' in v9fs_walk()
tests/9pfs: compare QIDs in fs_walk_none() test
tests/9pfs: Twalk with nwname=0
tests/9pfs: walk to non-existent dir
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
=Dxwa
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* statistics subsystem
* virtio reset cleanups
* build system cleanups
* fix Cirrus CI
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmKpooQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNlFwf+OugLGRZl3KVc7akQwUJe9gg2T31h
# VkC+7Tei8FAwe8vDppVd+CYEIi0M3acxD2amRrv2etCCGSuySN1PbkfRcSfPBX01
# pRWpasdhfqnZR8Iidi7YW1Ou5CcGqKH49nunBhW10+osb/mu5sVscMuOJgTDj/lK
# CpsmDyk6572yGmczjNLlmhYcTU36clHpAZgazZHwk1PU+B3fCKlYYyvUpT3ItJvd
# cK92aIUWrfofl3yTy0k4IwvZwNjTBirlstOIomZ333xzSA+mm5TR+mTvGRTZ69+a
# v+snpMp4ILDMoB5kxQ42kK5WpdiN//LnriA9CBFDtOidsDDn8kx7gJe2RA==
# =Dxwa
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 15 Jun 2022 02:12:36 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (21 commits)
build: include pc-bios/ part in the ROMS variable
meson: put cross compiler info in a separate section
q35:Enable TSEG only when G_SMRAME and TSEG_EN both enabled
build: fix check for -fsanitize-coverage-allowlist
tests/vm: allow running tests in an unconfigured source tree
configure: cleanup -fno-pie detection
configure: update list of preserved environment variables
virtio-mmio: cleanup reset
virtio: stop ioeventfd on reset
virtio-mmio: stop ioeventfd on legacy reset
s390x: simplify virtio_ccw_reset_virtio
block: add more commands to preconfig mode
hmp: add filtering of statistics by name
qmp: add filtering of statistics by name
hmp: add filtering of statistics by provider
qmp: add filtering of statistics by provider
hmp: add basic "info stats" implementation
cutils: add functions for IEC and SI prefixes
qmp: add filtering of statistics by target vCPU
kvm: Support for querying fd-based stats
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend previously added test case by checking that fid was unaffected
by 'Twalk' request (i.e. when 2nd path component of request being
invalid). Do that by subsequently sending a 'Tgetattr' request with
the fid previously used for 'Twalk'; that 'Tgetattr' request should
return an 'Rlerror' response by 9p server with error code ENOENT as
that fid is basically invalid.
And as we are at it, also check that the QID returned by 'Twalk' is
not identical to the root node's QID.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <6f0813cafdbf683cdac8b1492dd4ef8699c5b1d9.1647339025.git.qemu_oss@crudebyte.com>
Previous 9p patch fixed 'Twalk' request handling, which was previously not
behaving as specified by the 9p2000 protocol spec. This patch adds a new test
case which guards the new 'Twalk' behaviour in question.
More specifically: it sends a 'Twalk' request where the 1st path component
is valid, whereas the 2nd path component transmitted to server does not
exist. The expected behaviour is that 9p server would respond by sending
a 'Rwalk' response with exactly 1 QID (instead of 'Rlerror' response).
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <61bde2f44b87e24b70ec098dfb81765665b2dfcb.1647339025.git.qemu_oss@crudebyte.com>
Extend previously added fs_walk_none() test by comparing the QID
of the root fid with the QID of the cloned fid. They should be
equal.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <5bbe9c6931b4600a9a23742f5ff2d38c1188237d.1647339025.git.qemu_oss@crudebyte.com>
Send Twalk request with nwname=0. In this case no QIDs should
be returned by 9p server; this is equivalent to walking to dot.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <b5ead2775000203607801f09bcefc04c493d8bfa.1647339025.git.qemu_oss@crudebyte.com>
Expect ENOENT Rlerror response when trying to walk to a
non-existent directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Based-on: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com>
Message-Id: <1f5aa50ace3ba3861ea31e8888367518282065a6.1647339025.git.qemu_oss@crudebyte.com>
Determine the BARs used by the PCI device and register handlers to
manage the access to the same.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 3373e10b5be5f42846f0632d4382466e1698c505.1655151679.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
add the libvfio-user library as a submodule. build it as a meson
subproject.
libvfio-user is distributed with BSD 3-Clause license and
json-c with MIT (Expat) license
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: c2adec87958b081d1dc8775d4aa05c897912f025.1655151679.git.jag.raman@oracle.com
[Changed submodule URL to QEMU's libvfio-user mirror on GitLab. The QEMU
project mirrors its dependencies so that it can provide full source code
even in the event that its dependencies become unavailable. Note that
the mirror repo is manually updated, so please contact me to make newer
libvfio-user commits available. If I become a bottleneck we can set up a
cronjob.
Updated scripts/meson-buildoptions.sh to match the meson_options.txt
change. Failure to do so can result in scripts/meson-buildoptions.sh
being modified by the build system later on and you end up with a dirty
working tree.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/vm/Makefile.include used to assume that it could run in an unconfigured
source tree, and Cirrus CI relies on that. It was however broken by commit
f4c66f1705 ("tests: use tests/venv to run basevm.py-based scripts", 2022-06-06),
which co-opted the virtual environment being used by avocado tests
to also run the basevm.py tests.
For now, reintroduce the usage of qemu.qmp from the source directory, but
without the sys.path() hacks. The CI configuration can be changed to
install the package via pip when qemu.qmp is removed from the source tree.
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the knowledge of IEC and SI prefixes out of size_to_str and
freq_to_str, so that it can be reused when printing statistics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We inadvertently broke the ability to run local builds when the code
was re-factored. The result was the run stanza failing to find the
docker image with it's qemu/ prefix.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: d39eaa2266 ("tests/docker: simplify docker-TEST@IMAGE targets")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220613171258.1905715-5-alex.bennee@linaro.org>
Fixes a number of assembler warnings of the form:
test-i386.c: Assembler messages:
test-i386.c:869: Warning: no instruction mnemonic suffix given
and no register operands; using default for `fist'
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220527171143.168276-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-3-alex.bennee@linaro.org>
GCC11 from crossbuild-essential-armhf from ubuntu 22.04 errors:
cc1: error: ‘-mfloat-abi=hard’: selected architecture lacks an FPU
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220604032713.174976-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220613171258.1905715-2-alex.bennee@linaro.org>