When using Meson options rather than config-host.h, the "when" clauses
have to be changed to if statements (which is not necessarily great,
though at least it highlights which parts of the build are per-target
and which are not).
Do that before moving vhost logic to meson.build, though for now
the variables are just based on config-host.mak data.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Timer test assumes that timer 0 IRQ has level 1 and other timers have
higher level IRQs. This assumption is not correct and the levels may be
arbitrary. Fix that assumption by providing TIMER*_VECTOR macro and
using it for vector selection and by making the check for the timer
exception cause conditional.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMU test suite is disabled for cores that have spanning TLB way, i.e.
for all MMUv3 cores. Instead of disabling it make testing region virtual
addresses explicit and invalidate TLB mappings for entries that conflict
with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Autorefill tests in the phys_mem test suite are disabled for cores that
have spanning TLB way, i.e. for all MMUv3 cores. Instead of disabling it
invalidate TLB mappings for entries that conflict with the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may not have the loop option, but still have timers. Don't
use loop opcode in the timer test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa core may have only one set of DBREAKA/DBREAKC registers. Don't
hardcode register numbers in the test as 0 and 1, use macros that only
index valid DBREAK* registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Writing garbage into the vecbase SR results in hang in the subsequent
tests that expect to raise an exception. Restore vecbase SR to its
reset value after the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* Enable read access to performance counters from EL0
* Enable SCTLR_EL1.BT0 for aarch64-linux-user
* Refactoring of cpreg handling
-----BEGIN PGP SIGNATURE-----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=Q7ra
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Enable read access to performance counters from EL0
* Enable SCTLR_EL1.BT0 for aarch64-linux-user
* Refactoring of cpreg handling
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJzlJYZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rQXEACqtWhESD9ZJ0T1DfiWh7HX
# KXZuvB5C4kEdY8KXPJsdFM47KGMB29AI1pfqN5oRvalGG40ROM1HNTO44LSjKgUr
# b+aEq0bcbOJQuhfc5EPoh3b9wekowxlBYsH3Zq251J6ua6dRd1iqdeGXFIZbn02x
# RY5lXB2wgWh8LnF+qwoLiIrqJWsJ8PSOolyl0LrKjI3Z22UboK1Y5K0sbJBlavX4
# xKEyd4Af1Jq+1GcleSymAjcNF1iO+38w6rrFSgMWj+f3HSjKCk+MHU78rfqVNa88
# ESRjBj1x3c8kRzNzy+Q8ntJ5QzREvFDpUYBC9lvnoLKQ6xRJWDvvZQw2YJGsH8sB
# Xgg8fQ75iYEQdN4SHLWn24OwZpKuzTZ4QYm0d02GiAZCGXgAFEIKG62lBd3UJTAy
# 6wTUdjuLv/KA+Lc3qdvmFfOVxfPh728VvFl55IoGXZv9FFrxvrluLEgr3TIje9W3
# 0r1FcjtAuuTHzKiaf8UsmvMW9nR550L1xQ+uMY8GKQvQgSvkf050srVZS05GFItH
# DqCUv++hsyi0b44J377cUKkAEOdH/rhV20pvvfoJthRgmHLNN5LG61JI9eK9JXzl
# +AYpbxAC3R6f0dp6/31D0ZRhW7wcC/rt1EVK/iACVKoGo8hZf3lC64y2+3TVoApF
# DdCadVNnR9eUFWh1inGXKQ==
# =Q7ra
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 05 May 2022 04:10:46 AM CDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220505' of https://git.linaro.org/people/pmaydell/qemu-arm: (23 commits)
target/arm: read access to performance counters from EL0
target/arm: Add isar_feature_{aa64,any}_ras
target/arm: Add isar predicates for FEAT_Debugv8p2
target/arm: Remove HOST_BIG_ENDIAN ifdef in add_cpreg_to_hashtable
target/arm: Reformat comments in add_cpreg_to_hashtable
target/arm: Perform override check early in add_cpreg_to_hashtable
target/arm: Hoist isbanked computation in add_cpreg_to_hashtable
target/arm: Use bool for is64 and ns in add_cpreg_to_hashtable
target/arm: Consolidate cpreg updates in add_cpreg_to_hashtable
target/arm: Hoist computation of key in add_cpreg_to_hashtable
target/arm: Merge allocation of the cpreg and its name
target/arm: Store cpregs key in the hash table directly
target/arm: Drop always-true test in define_arm_vh_e2h_redirects_aliases
target/arm: Name CPSecureState type
target/arm: Name CPState type
target/arm: Change cpreg access permissions to enum
target/arm: Avoid bare abort() or assert(0)
target/arm: Reorg ARMCPRegInfo type field bits
target/arm: Make some more cpreg data static const
target/arm: Replace sentinels with ARRAY_SIZE in cpregs.h
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This controls whether the PACI{A,B}SP instructions trap with BTYPE=3
(indirect branch from register other than x16/x17). The linux kernel
sets this in bti_enable().
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/998
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220427042312.294300-1-richard.henderson@linaro.org
[PMM: remove stray change to makefile comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This should work for all format drivers that support reopening, so test
it.
(This serves as a regression test for HEAD^: This test used to fail for
VMDK before HEAD^.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220314162719.65384-3-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a VM with a BDS in an iothread, add -incoming defer to the
command line, and then export this BDS via NBD. Doing so should not
fail an assertion.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-5-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Binutils >=2.37 and Clang do not accept (. - 0x100000000) PCRel32
constants. While this looks like a bug that needs fixing, use a
different notation (-0x100000000) as a workaround.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220502164830.1622191-1-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220428094708.84835-14-david@redhat.com>
[thuth: Only add test if -march=z15 is supported. Fix constraints for Clang]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will help moving QAPI/QMP in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
I was setting gpioV4-7 to "1110" using the QOM pin property handler and
noticed that lowering gpioV7 was inadvertently lowering gpioV4-6 too.
(qemu) qom-set /machine/soc/gpio gpioV4 true
(qemu) qom-set /machine/soc/gpio gpioV5 true
(qemu) qom-set /machine/soc/gpio gpioV6 true
(qemu) qom-get /machine/soc/gpio gpioV4
true
(qemu) qom-set /machine/soc/gpio gpioV7 false
(qemu) qom-get /machine/soc/gpio gpioV4
false
An expression in aspeed_gpio_set_pin_level was using a logical NOT
operator instead of a bitwise NOT operator:
value &= !pin_mask;
The original author probably intended to make a bitwise NOT expression
"~", but mistakenly used a logical NOT operator "!" instead. Some
programming languages like Rust use "!" for both purposes.
Fixes: 4b7f956862 ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and
AST2500")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220502080827.244815-1-pdel@fb.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This add two addition test cases for accumulative mode under sg enabled.
The input vector was manually craft with "abc" + bit 1 + padding zeros + L.
The padding length depends on algorithm, i.e. SHA512 (1024 bit),
SHA256 (512 bit).
The result was calculated by command line sha512sum/sha256sum utilities
without padding, i.e. only "abc" ascii text.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
[ clg: checkpatch fixes ]
Message-Id: <20220426021120.28255-4-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add test case to test "ast1030-evb" machine with zephyr os
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-10-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add simple test-case for new display-update qmp command.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220401143936.356460-4-vsementsov@openvz.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
=I1yM
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb into staging
nbd patches for 2022-04-26
- Paolo Bonzini: thread-safety improvements to NBD client
- Vladimir Sementsov-Ogievsky: finer-grained selection of bitmaps during
nbd-export
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmJoUhAACgkQp6FrSiUn
# Q2qnpgf/YCuONdwAndjEo7he5c1BfB/F2sujQJJ00CebUqnz5OFKQ85RwLC8DCGB
# rXnxqC/NF4yyYM+6uYWDpggDd0bJVKbfG7NE/AZsEZrK+n9xMkvGLRwGqMugUii+
# Px4Ba98++0giqGoAI8pU/wQZNh1I6uGabv/DPRTpwzBjbfAcATqV09OzaGiK3SRC
# Zm/55zmXm1zM4XSUtUzN1gILPG09P+51m6NVkANZbzps9e2PtfFy8EsWc5+YhuBM
# 5K7sN+5g8GpRhz6j8RkrhrbNpvg3bGvgRJRMcW7Bo8KVUdvT1Jng6xs8CIRv39AF
# jDJwGe+cq5p5PNuyqOrVSA/ynBZxBw==
# =I1yM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Apr 2022 01:12:00 PM PDT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
* tag 'pull-nbd-2022-04-26' of https://repo.or.cz/qemu/ericb:
nbd: document what is protected by the CoMutexes
nbd: take receive_mutex when reading requests[].receiving
nbd: move s->state under requests_lock
nbd: code motion and function renaming
nbd: use a QemuMutex to synchronize yanking, reconnection and coroutines
nbd: keep send_mutex/free_sema handling outside nbd_co_do_establish_connection
nbd: remove peppering of nbd_client_connected
nbd: mark more coroutine_fns
nbd: safeguard against waking up invalid coroutine
iotests/223: check new possibility of exporting bitmaps by node/name
qapi: nbd-export: allow select bitmaps by node/name pair
qapi: rename BlockDirtyBitmapMergeSource to BlockDirtyBitmapOrStr
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add simple test that new interface introduced in previous commit works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-4-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a regression test for tcg indirect global lowering.
This appeared with nios2, with cps != 0, so that we use
indirection into the shadow register set. An indirect
call verifies alignment of rA. The use of rA was live
across the brcond leading to a tcg_debug_assert failure.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220421151735.31996-65-richard.henderson@linaro.org>
Add runtime supporting the nios2-semi.c interface.
Execute the hello and memory multiarch tests.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-64-richard.henderson@linaro.org>
Now that threads and signals have been fixed, re-enable tests.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-9-richard.henderson@linaro.org>
FUSE exports' allow-other option defaults to "auto", which means that it
will try passing allow_other as a mount option, and fall back to not
using it when an error occurs. We make no effort to hide fusermount's
error message (because it would be difficult, and because users might
want to know about the fallback occurring), and so when allow_other does
not work (primarily when /etc/fuse.conf does not contain
user_allow_other), this error message will appear and break the
reference output.
We do not need allow_other here, though, so we can just pass
allow-other=off to fix that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220421142435.569600-1-hreitz@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Just like qemu_img_log(), upgrade qemu_io_log() to enforce a return code
of zero by default.
Tests that use qemu_io_log(): 242 245 255 274 303 307 nbd-reconnect-on-open
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Like qemu-img, qemu-io returning 0 should be the norm and not the
exception. Remove all calls to qemu_io_silent that just assert the
return code is zero (That's every last call, as it turns out), and
replace them with a normal qemu_io() call.
qemu_io_silent_check() appeared to have been unused already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
I know we just added it, sorry. This is done in favor of qemu_io() which
*also* returns the console output and status, but with more robust error
handling on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test expects failure ... but only sometimes. When? Why?
It's for reads of a region not defined by a bitmap. Adjust the test to
be more explicit about what it expects to fail and why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Modify this test to use assertRaises for its negative testing of
qemu_io. If the exception raised does not match the one we tell it to
expect, we get *that* exception unhandled. If we get no exception, we
get a unittest assertion failure and the provided emsg printed to
screen.
If we get the CalledProcessError exception but the output is not what we
expect, we re-raise the original CalledProcessError.
Tidy.
(Note: Yes, you can reference "with" objects after that block ends; it
just means that ctx.__exit__(...) will have been called on it. It does
not *actually* go out of scope. unittests expects you to want to inspect
the Exception object, so they leave it defined post-exit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
reimplement qemu_img() in terms of qemu_tool() in preparation for doing
the same with qemu_io().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without this change, asserting that qemu_io always returns 0 causes this
test to fail in a way we happened not to be catching previously:
qemu.utils.VerboseProcessError: Command
'('/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/../../qemu-io',
'--cache', 'writeback', '--aio', 'threads', '-f', 'qcow2', '-c',
'read -P 4 3M 1M',
'/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img')'
returned non-zero exit status 1.
┏━ output ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┃ qemu-io: can't open device
┃ /home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img:
┃ Could not open backing file: Could not open backing file: Throttle
┃ group 'tg' does not exist
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The commit jobs changes the backing file string stored in the image file
header belonging to the node above the commit’s top node to point to the
commit target (the base node). QEMU tries to be as accurate as
possible, and so in these test cases will include the filter that is
part of the block graph in that backing file string (by virtue of making
it a json:{} description of the post-commit subgraph). This makes
little sense outside of QEMU, though: Specifically, the throttle node in
that subgraph will dearly miss its supposedly associated throttle group
object.
When starting the commit job, we can specify a custom backing file
string to write into said image file, so let’s use that feature to write
the plain filename of the backing chain’s next actual image file there.
Explicitly provide the backing file so that opening the file outside of
QEMU (Where we will not have throttle groups) will succeed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220418211504.943969-6-jsnow@redhat.com>
qemu-io fails on read/write beyond end-of-file on raw images, so skip
these invocations when running the zero-length image tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
A forthcoming commit updates qemu_io() to raise an exception on non-zero
return by default, and changes its return type.
In preparation, simplify some calls to qemu_io() that assert that
specific error message strings do not appear in qemu-io's
output. Asserting that all of these calls return a status code of zero
will be a more robust way to guard against failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The 'read' commands to qemu-io were malformed, and this invocation only
worked by coincidence because the error messages were identical. Oops.
There's no point in checking the patterning of the reference image, so
just check the empty image by itself instead.
(Note: as of this commit, nothing actually enforces that this command
completes successfully, but a forthcoming commit in this series will
enforce that qemu_io() must have a zero status code.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-3-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This makes these callsites a little simpler, but the real motivation is
a forthcoming commit will change the return type of qemu_io(), so removing
users of the return value now is helpful.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-2-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Dan: Test fixes and improvements (TLS mostly)
Peter: Postcopy improvements
Me: Race fix for info migrate, and compilation fix
V2:
Fixed checkpatch nit of unneeded NULL check
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M5sx
-----END PGP SIGNATURE-----
Merge tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu into staging
V2: Migration pull 2022-04-21
Dan: Test fixes and improvements (TLS mostly)
Peter: Postcopy improvements
Me: Race fix for info migrate, and compilation fix
V2:
Fixed checkpatch nit of unneeded NULL check
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmJhpLIACgkQBRYzHrxb
# /edCPQ//dITFWStcsvon8gBBRWY/ekz/EdmWd2KFUp1r/yzopXExW5Gy+MzzTEwk
# axf7s991eyjta1gU0IYCzWcuR36LE8YsZRgDlOhttZ/674ZnX5ZIJBggwDKE/bYE
# IEHd8qsHy6oV8UIFvBQ6wvIDJmH+8gOwnPUzOO9Ek2UkSgBGsptZ8d6Hi0hTzYFB
# omhgc2eO3XQUlxM+8MwlrZU84QkxnBn2g7nVgDQyRokAou46Yf8FD/bWv3CKAdO+
# Ph+4XjBiddBFYUtf4XWSTvVfi23kij1k/4bjH3zaocE86gQ6CUteImFtowwr6N95
# sJl1EXBOtz0BP5xONqkywpWi1Qqg+mecF4KrS4XAHszaUkaj3sTFOyItwlTzZErF
# /2dZRsPRs9fTcjjzpOe/CKoGr+CcyZdxY1qbCNfHaJagdxytN2qxOaneTUbKYUE5
# n4Om9zxDS2esZCnkx26e2wylJ1wzKZBbjsoKYQA4IGaQ6Qz8Zciea0tApwhgyVjs
# KHcYtvScPLxmEEKgzDap6B7fJxyaOg3KNX+0XzLLpLS1oaeqwvSIQM/QMMrnwGxs
# uA1LI2uqlQBitaJOhgLMnNH4ze27HC3DM4OWAE+iOhpD+LNAWstjWraNNXbG4sSj
# 55ndJHJxOCjPlFY4dB/ytUbUo7XBkztCR4c1+I+lSUbMTq3KuUg=
# =M5sx
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Apr 2022 11:38:42 AM PDT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
* tag 'pull-migration-20220421a' of https://gitlab.com/dagrh/qemu:
migration: Read state once
migration: Fix operator type
migration: Allow migrate-recover to run multiple times
migration: Move channel setup out of postcopy_try_recover()
migration: Export ram_load_postcopy()
migration: Move migrate_allow_multifd and helpers into migration.c
migration: Add pss.postcopy_requested status
migration: Drop multifd tls_hostname cache
migration: Postpone releasing MigrationState.hostname
tests: expand the migration precopy helper to support failures
tests: switch migration FD passing test to use common precopy helper
tests: introduce ability to provide hooks for migration precopy test
tests: merge code for UNIX and TCP migration pre-copy tests
tests: switch MigrateStart struct to be stack allocated
migration: fix use of TLS PSK credentials with a UNIX socket
tests: print newline after QMP response in qtest logs
tests: support QTEST_TRACE env variable
tests: improve error message when saving TLS PSK file fails
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The combination of the start and finish hooks allow the FD passing
code to use the precopy helper
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-11-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The test cases differ only in the URI they provide to the migration
commands, and the ability to set the dirty_ring mode. This code is
trivially merged into a common helper.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-9-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's no compelling reason why the MigrateStart struct needs to be
heap allocated. Using stack allocation and static initializers is
simpler.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-8-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The QMP commands have a trailing newline, but the response does not.
This makes the qtest logs hard to follow as the next QMP command
appears in the same line as the previous QMP response.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When debugging failing qtests it is useful to be able to turn on trace
output to stderr. The QTEST_TRACE env variable contents get injected
as a '-trace <str>' command line arg
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-3-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
iotests is already using async QMP, but to finalize the switchover we
only need to update any remaining import paths to rely solely on the new
library instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-5-jsnow@redhat.com
[Fixed minor rebase conflict. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
We don't have to maintain compatibility with both QMP libraries anymore,
so we can just remove the old exception. While we're here, take
advantage of the extra fields present in the VMLaunchFailure exception
that machine.py now raises.
(Note: I'm leaving the logging suppression here unchanged. I had
suggested previously we use filters to scrub the PID out of the logging
information so it could just be diffed as part of the iotest output, but
that meant *always* scrubbing PID from logger output, which defeated the
point of even offering that information in the output to begin with.
Ultimately, I decided it's fine to just suppress the logger temporarily.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
../tests/qtest/fuzz/generic_fuzz.c:746:17: warning: variable 'name' set but not used [-Wunused-but-set-variable]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220420132624.2439741-42-marcandre.lureau@redhat.com>
This allows to make sure the test is still built, and gives more
accurate report details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-30-marcandre.lureau@redhat.com>
The functions are already covered in check-block-qdict.c.
This will help moving QAPI-related tests in a common subproject.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-26-marcandre.lureau@redhat.com>
Move them where they belong, since the functions are implemented in block-qdict.c.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-25-marcandre.lureau@redhat.com>
Do not require the whole option machinery to handle keyval, as it is
used by QAPI alone, without the option API. And match the associated
unit name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-24-marcandre.lureau@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220321164243.200569-4-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Dead code dropped in test_visitor_in_alternate_list()]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Check that conflicts among array alternates are detected correctly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220321164243.200569-3-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Expected test output alternate-conflict-lists.json corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Detect array types as alternate branches, and turn the JSON list into
a QAPISchemaArrayType. Array types in an alternate are represented with
QTYPE_QLIST in the type field.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220321164243.200569-2-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement an unsigned right shift for Int128 values and add the same
tests cases of int128_rshift in the unit test.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220330175932.6995-3-matheus.ferst@eldorado.org.br>
[danielhb: fixed long lines in test_urshift()]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
U1VqHg==
=Mt5s
-----END PGP SIGNATURE-----
Merge tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu into staging
Clean up log locking.
Use the FILE* from qemu_log_trylock more often.
Support per-thread log files with -d tid.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmJgStUdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+c9Af/ZXnKe6bz5yjXy1mS
# mNIBJUPKrz1RXFfJxuCfEDWrtNc/gvQyvc3weZG5X0cXpiczeWA5V/9xbE9hu5gV
# 4rePiIHWmOrais6GZlqEu2F8P3/XyqdPHtcdBfa1hDneixtpqMHCqnh36nQjHyiU
# ogFxEJ/M9tTwhuWZrXe/JSYAiALEDYMK9bk4RUMOP1c4v37rXqUNOAM1IPhfxLL/
# bK9DQMpz5oUNsWWaqBQ2wQWHkNTOpUEkKGQv0xcQF5SdpYwaxakW9B7/h4QSeOUn
# oY6MFTmkJ4BPrLnkcubn+3PICc9LW0OFuzNnUdMCbeqVbjAUQrdMDalKpy4uNFv9
# U1VqHg==
# =Mt5s
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 11:03:01 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-log-20220420' of https://gitlab.com/rth7680/qemu: (39 commits)
util/log: Support per-thread log files
util/log: Limit RCUCloseFILE to file closing
util/log: Rename QemuLogFile to RCUCloseFILE
util/log: Combine two logfile closes
util/log: Hoist the eval of is_daemonized in qemu_set_log_internal
util/log: Rename qemu_logfile_mutex to global_mutex
util/log: Rename qemu_logfile to global_file
util/log: Rename logfilename to global_filename
util/log: Remove qemu_log_close
softmmu: Use qemu_set_log_filename_flags
linux-user: Use qemu_set_log_filename_flags
bsd-user: Use qemu_set_log_filename_flags
util/log: Introduce qemu_set_log_filename_flags
sysemu/os-win32: Test for and use _lock_file/_unlock_file
include/qemu/log: Move entire implementation out-of-line
include/exec/log: Do not reference QemuLogFile directly
tests/unit: Do not reference QemuLogFile directly
linux-user: Expand log_page_dump inline
bsd-user: Expand log_page_dump inline
util/log: Drop call to setvbuf
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
=8q12
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu into staging
Testing, docs and gdbstub updates:
- make -M virt test exercise -cpu max
- document how binfmt_misc docker works
- clean-up the devel TOC generation
- clean-up check-tcg cross-compile behaviour
- fix byte swap error in xmm gdbstub access
- add float_convd test with reference files
- more reference files for float_convs
- more cleanly handle gdb crashing during check-tcg
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmJgIgsACgkQ+9DbCVqe
# KkRs3Qf/WnL4YV3l8jO/wEVbls/57aLPk+ak1GuvXJ+iM9gH8Qz6WZxIJIEhhHlu
# ZEixCewahTn8POMMRo4JAr0bRgtfBuh717GerXObiHcS3OuLsGM8rYP2Z1xqKL3L
# 4pR8VqhyUq/Jyl/6MPN5OZB0AdEPIdI5MuflckCeDcFaowpthLjwHao07hG/FU0s
# wQYS7aYTZT33V2Xm6xlePEEMq8YMPCJj00HF3Ljg4eUOmb+C+csFXMQtotsBJRCg
# mC/T2U0IFbrQUkkWJqVmRCPwKraQGDMn6POk298siRWE0kV4BmH8mnmN+/Jxhqgl
# QfFhQrsBxmPPG5TfQhEmlHfQ5EARLQ==
# =8q12
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 08:08:59 AM PDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-fixes-for-7.1-200422-1' of https://github.com/stsquad/qemu: (25 commits)
tests/guest-debug: better handle gdb crashes
target/i386: fix byte swap issue with XMM register access
tests/tcg: add missing reference files for float_convs
tests/tcg: add float_convd test
tests/tcg: remove duplicate sha512-sse case
tests/tcg: fix non-static build
tests/docker: remove SKIP_DOCKER_BUILD
tests/tcg: isolate from QEMU's config-host.mak
tests/tcg: invoke Makefile.target directly from QEMU's makefile
tests/tcg: list test targets in Makefile.prereqs
tests/tcg: prepare Makefile.prereqs at configure time
tests/tcg: remove CONFIG_USER_ONLY from config-target.mak
tests/tcg: remove CONFIG_LINUX_USER from config-target.mak
tests/tcg: add compiler test variables when using containers
tests/docker: do not duplicate rules for hexagon-cross
tests/docker: simplify docker-TEST@IMAGE targets
tests/docker: remove unnecessary filtering of $(DOCKER_IMAGES)
tests/docker: inline variable definitions or move close to use
tests/docker: remove unnecessary default definitions
tests/docker: remove dead variable
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The only real use is in cpu_abort, where we have just
flushed the file via qemu_log_unlock, and are just about
to force-crash the application via abort. We do not
really need to close the FILE before the abort.
The two uses in test-logging.c can be handled with
qemu_set_log_filename_flags.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-32-richard.henderson@linaro.org>
Move QemuLogFile, qemu_logfile, and all inline functions into qemu/log.c.
No need to expose these implementation details in the api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-26-richard.henderson@linaro.org>
Use qemu_log_lock/unlock instead of the raw rcu_read.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-24-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Do not force exit within qemu_set_log; return bool and pass
an Error value back up the stack as per usual.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-5-richard.henderson@linaro.org>
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
-----BEGIN PGP SIGNATURE-----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=BF0c
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- Some changes for qcow2's refcount repair algorithm to make it work for
qcow2 images stored on block devices
- Skip test cases that require zstd when support for it is missing
- Some refactoring in the iotests' meson.build
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmJf/asSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfYXUQAKQv5qKQBjU4MTwlS8A4h6B6OJgC1Sik
# 9BB7LO/QFjuuF4vNKpcUlf6i0epxPP8B5pmCjaAolMh6u6wZwL7hHq+SOYXvejTo
# vINW+r097U0qYPkSV+cS6tbW92rYJDD7VxF+34udiWXGjozsBTw/k9DfJaa9Ht66
# 2dw3AxUa4lxN1/ejFzDLx3DNaff+HctLhgVpHeBb0eN2zr2Ug5+ZFgMoiWwU6r6J
# EzTORLAzATerlQVYUkhh4Y/UdVLLw1SzTWOQv5b/NqvaLfKmYsQobSfjC2ajO8XJ
# P2REigcOAij5uWVRf4EY7xoqmADP8pXxuOTzw0hyGNLOLNcXoFbfW45WSPoY+YgH
# EH1TtC4vMsg/MlO/A3PJr9v+SNqxz32cul3MVrY3PuG4Dzz0riy9GhtFUU37igbj
# mR6pP3nSa/f2X4+9B6/UrPjLzusRvc8bvzYqVEnSLABav11npphkYaR9QT1fQUVD
# Zw26igXtmLKUcfop/EqShbhblk0ZLYDTj/Lx7X+thC9OCrK1QgF6qAsIUqiS1iHz
# vwdktRTCofo4ZIT/OCz5QeriJqDz0B7VJ8/4i/uvm2eq8BUsn2mJuyAGD2XtaONV
# rmASrV9VbajdxX5VptjKOOHG6aHtqQlKbyBFog8I4nqVFdjdSMalb++gBMCrPu1A
# 1iZPsOOyz/8+
# =BF0c
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Apr 2022 05:33:47 AM PDT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-04-20' of https://gitlab.com/hreitz/qemu:
qcow2: Add errp to rebuild_refcount_structure()
iotests/108: Test new refcount rebuild algorithm
qcow2: Improve refcount structure rebuilding
iotests/303: Check for zstd support
iotests/065: Check for zstd support
iotests.py: Add supports_qcow2_zstd_compression()
tests/qemu-iotests: Move the bash and sanitizer checks to meson.build
tests/qemu-iotests/meson.build: Improve the indentation
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are a number of GDB's on various distros which fail fairly hard
when attempting to talk to a cross-arch guest. The previous attempt to
catch this was incorrect as the shell will deliver signals as 128+n.
Fix the detection and while we are it improve the logging we dump into
the test output.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Gautam Agrawal <gautamnagrawal@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-26-alex.bennee@linaro.org>
We might as well include a reference file for i386/x86_64. I was going
to include s390x as well but it's broken hence I raised:
https://gitlab.com/qemu-project/qemu/-/issues/979.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220419091020.3008144-24-alex.bennee@linaro.org>
This is a simple transliteration of the float_convs test but this time
working with doubles. I'm used it to test the handling of vector
registers in gdbstub but wasn't able to find a non-ugly way to
automate it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-23-alex.bennee@linaro.org>
We already generate the sha512-sse case in the i386 makefile which
works for both i386 and x86_64.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: f8a4c6d728 ("tests/tcg: add vectorised sha512 versions")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-22-alex.bennee@linaro.org>
If linking with -static fails at configure time, -static should not be used
at build time either. Do not include BUILD_STATIC in $config_target_mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-18-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-21-alex.bennee@linaro.org>
It is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-17-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-20-alex.bennee@linaro.org>
Do not include variables for the QEMU's own compiler, as they
are not necessarily related to the cross compiler used for tests/tcg.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-16-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-19-alex.bennee@linaro.org>
Build the "docker.py cc" invocation directly in tests/tcg/configure.sh, and
remove the Makefile.qemu wrapper around Makefile.target. The config-*.mak
files now include the actual variables used when building the tests, rather
than the CROSS_* variables that Makefile.qemu used to "translate".
This is a first step towards generalizing the cross-compilation infrastructure
so that it can be used for firmware as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-15-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-18-alex.bennee@linaro.org>
Omit the rules altogether for targets that do not have a compiler.
Makefile.qemu now is only invoked if the tests are actually built/run.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-14-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-17-alex.bennee@linaro.org>
List the dependencies of the build-tcg-tests-* and run-tcg-tests-*
targets in a Makefile fragment, without going through Makefile.prereqs's
"parsing" of config-*.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-13-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-16-alex.bennee@linaro.org>
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-12-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-15-alex.bennee@linaro.org>
Just check the target name instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220401141326.1244422-11-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-14-alex.bennee@linaro.org>
Even for container-based cross compilation use $(CROSS_CC_HAS_*) variables.
This makes the TCG test makefiles oblivious of whether the compiler is
invoked through a container or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-10-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-13-alex.bennee@linaro.org>
The commands for docker-image-debian-hexagon-cross are the same as those
in debian-toolchain-run, just with a nonstandard path to build-toolchain.sh.
Reuse the definition by renaming the debian-hexagon-cross.docker.d directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-9-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-12-alex.bennee@linaro.org>
No need to go through the shell when we already have the test and images at
the point where the targets are declared.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-8-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-11-alex.bennee@linaro.org>
Now that DOCKER_IMAGES is only defined after DOCKER_VIRTUAL_IMAGES is
complete, there is no need to re-filter DOCKER_IMAGES against it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-7-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-10-alex.bennee@linaro.org>
Variables that are defined with ":=" are handled imperatively, so moving
them closer to the first use ensures that all the assignments prior to
the first use are taken into account.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-6-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-9-alex.bennee@linaro.org>
The definition of DOCKER_IMAGES and DOCKER_TESTS copes already with an
empty value of $(IMAGES) and $(TESTS), no need to force them to "%" if
undefined.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220401141326.1244422-5-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-8-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-7-alex.bennee@linaro.org>
debian-powerpc-user-cross was the only linux-user powered cross builder
and it was removed in commit 80394ccf21 ("tests/docker: remove
debian-powerpc-user-cross", 2019-09-26). Remove all the infrastructure
around it since it is now unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220401141326.1244422-2-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-5-alex.bennee@linaro.org>
The Fedora 29 kernel is quite old and importantly fails when running
in LPA2 scenarios. As it's not really exercising much of the CPU space
replace it with a custom 5.16.12 kernel with all the architecture
options turned on. There is a minimal buildroot initramfs included in
the kernel which has a few tools for stress testing the memory
subsystem. The userspace also targets the Neoverse N1 processor so
would fail with a v8.0 cpu like cortex-a53.
While we are at it move the test into its own file so it can have an
assigned maintainer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220419091020.3008144-2-alex.bennee@linaro.org>
One clear problem with how qcow2's refcount structure rebuild algorithm
used to be before "qcow2: Improve refcount structure rebuilding" was
that it is prone to failure for qcow2 images on block devices: There is
generally unused space after the actual image, and if that exceeds what
one refblock covers, the old algorithm would invariably write the
reftable past the block device's end, which cannot work. The new
algorithm does not have this problem.
Test it with three tests:
(1) Create an image with more empty space at the end than what one
refblock covers, see whether rebuilding the refcount structures
results in a change in the image file length. (It should not.)
(2) Leave precisely enough space somewhere at the beginning of the image
for the new reftable (and the refblock for that place), see whether
the new algorithm puts the reftable there. (It should.)
(3) Test the original problem: Create (something like) a block device
with a fixed size, then create a qcow2 image in there, write some
data, and then have qemu-img check rebuild the refcount structures.
Before HEAD^, the reftable would have been written past the image
file end, i.e. outside of what the block device provides, which
cannot work. HEAD^ should have fixed that.
("Something like a block device" means a loop device if we can use
one ("sudo -n losetup" works), or a FUSE block export with
growable=false otherwise.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-3-hreitz@redhat.com>
303 runs two test cases, one of which requires zstd support.
Unfortunately, given that this is not a unittest-style test, we cannot
easily skip that single case, and instead can only skip the whole test.
(Alternatively, we could split this test into a zlib and a zstd part,
but that seems excessive, given that this test is not in auto and thus
likely only run by developers who have zstd support compiled in.)
Fixes: 677e0bae68 ("iotest 303: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220323105522.53660-4-hreitz@redhat.com>
Some test cases run in iotest 065 want to run with zstd compression just
for added coverage. Run them with zlib if there is no zstd support
compiled in.
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: 12a936171d ("iotest 065: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-2-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
We want to get rid of check-block.sh in the long run, so let's move
the checks for the bash version and sanitizers from check-block.sh
into the meson.build file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-4-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
By using subdir_done(), we can get rid of one level of indentation
in this file. This will make it easier to add more conditions to
skip the iotests in future patches.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-3-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Removes the hard-coded values in setUp(). Class inheriting from
avocado_qemu.LinuxTest can overwrite the default smp and memory instead.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/453
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20210802222257.50946-1-email@aabouzied.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Eric noticed while attempting to enable the vhost-user-blk-test for
Aarch64 that that things didn't work unless he put in a dummy
guest_malloc() at the start of the test. Without it
qvirtio_wait_used_elem() would assert when it reads a junk value for
idx resulting in:
qvirtqueue_get_buf: idx:2401 last_idx:0
qvirtqueue_get_buf: 0x7ffcb6d3fe74, (nil)
qvirtio_wait_used_elem: 3000000/0
ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
Bail out! ERROR:../../tests/qtest/libqos/virtio.c:226:qvirtio_wait_used_elem: assertion failed (got_desc_idx == desc_idx): (50331648 == 0)
What was actually happening is the guest_malloc() effectively pushed
the allocation of the vring into the next page which just happened to
have clear memory. After much tedious tracing of the code I could see
that qvring_init() does attempt initialise a bunch of the vring
structures but skips the vring->used.idx value. It is probably not
wise to assume guest memory is zeroed anyway. Once the ring is
properly initialised the hack is no longer needed to get things
working.
Thanks-to: John Snow <jsnow@redhat.com> for helping debug
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220406173356.1891500-1-alex.bennee@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The fuzz tests are currently scheduled for all targets, but their setup
code limits the run to "i386", so that these tests always show "SKIP"
on other targets. Move it to the right x86 list in meson.build, then
we can drop the architecture check during runtime, too.
Message-Id: <20220414130127.719528-1-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Allow the same set of tests for all MIPS targets, so that "mipsel"
now gets some additional test coverage, too. While we're at it,
simplify the definitions for qtests_mips64 and qtests_mips64el.
Message-Id: <20220414114655.604391-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The perl test harness is not necessary anymore since commit 3d2f73ef75
("build: use "meson test" as the test harness"). Thus remove it from
tests/lcitool/projects/qemu.yml, run "make lcitool-refresh" and manually
clean the remaining docker / vm files that are not managed by lcitool yet.
Message-Id: <20220329102808.423681-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use more idiomatic glib/auto-style code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-11-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running "make lcitool-refresh", this currently uses the hard-coded
/usr/bin/python3 from the script's shebang line for running Python.
That's bad, since neither /usr/bin/python3 is guaranteed to exist, nor
does it honor the python interpreter that the user might have chosen
while running the "configure" script. Thus let's rather use $(PYTHON)
in the Makefile, and improve the shebang line in the script in case
someone runs this directly.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220329063958.262669-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Disable GLOBAL_STATE_CODE() assertion for the 7.0 release: We got
another bug report for this, and we do not have the time to
investigate before 7.0, so disable the assertion for the release, to
re-enable and continue investigation in the 7.1 cycle
- stream job fix (regarding interaction with concurrent block jobs)
- iotests fixes
-----BEGIN PGP SIGNATURE-----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=JjXm
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2022-03-29' of https://gitlab.com/hreitz/qemu into staging
Block patches for 7.0-rc2:
- Disable GLOBAL_STATE_CODE() assertion for the 7.0 release: We got
another bug report for this, and we do not have the time to
investigate before 7.0, so disable the assertion for the release, to
re-enable and continue investigation in the 7.1 cycle
- stream job fix (regarding interaction with concurrent block jobs)
- iotests fixes
# gpg: Signature made Tue 29 Mar 2022 15:55:33 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2022-03-29' of https://gitlab.com/hreitz/qemu:
iotests: Fix status checks
block/stream: Drain subtree around graph change
main-loop: Disable GLOBAL_STATE_CODE() assertions
iotests: update test owner contact information
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the migration is over before we cancel it, we are
waiting in a loop a state that never comes because the state
is already "completed".
To avoid an infinite loop, skip the test if the migration
is "completed" before we were able to cancel it.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20220329124259.355995-1-lvivier@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An iotest's 'paused' condition is fickle; it will be reported as true
whenever the job is drained, for example, or when it is in the process
of completing.
030 and 041 contain such checks, we should replace them by checking the
job status instead. (As was done for 129 in commit f9a6256b48
for the 'busy' condition.)
Additionally, when we want to test that a job is paused on error, we
might want to give it some time to actually switch to the paused state.
Do that by waiting on the corresponding JOB_STATUS_CHANGE event. (But
only if they are not already paused; the loops these places are in fetch
all VM events, so they may have already fetched that event from the
queue.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324180221.24508-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the stream block job cuts out the nodes between top and base in
stream_prepare(), it does not drain the subtree manually; it fetches the
base node, and tries to insert it as the top node's backing node with
bdrv_set_backing_hd(). bdrv_set_backing_hd() however will drain, and so
the actual base node might change (because the base node is actually not
part of the stream job) before the old base node passed to
bdrv_set_backing_hd() is installed.
This has two implications:
First, the stream job does not keep a strong reference to the base node.
Therefore, if it is deleted in bdrv_set_backing_hd()'s drain (e.g.
because some other block job is drained to finish), we will get a
use-after-free. We should keep a strong reference to that node.
Second, even with such a strong reference, the problem remains that the
base node might change before bdrv_set_backing_hd() actually runs and as
a result the wrong base node is installed.
Both effects can be seen in 030's TestParallelOps.test_overlapping_5()
case, which has five nodes, and simultaneously streams from the middle
node to the top node, and commits the middle node down to the base node.
As it is, this will sometimes crash, namely when we encounter the
above-described use-after-free.
Taking a strong reference to the base node, we no longer get a crash,
but the resuling block graph is less than ideal: The expected result is
obviously that all middle nodes are cut out and the base node is the
immediate backing child of the top node. However, if stream_prepare()
takes a strong reference to its base node (the middle node), and then
the commit job finishes in bdrv_set_backing_hd(), supposedly dropping
that middle node, the stream job will just reinstall it again.
Therefore, we need to keep the whole subtree drained in
stream_prepare(), so that the graph modification it performs is
effectively atomic, i.e. that the base node it fetches is still the base
node when bdrv_set_backing_hd() sets it as the top node's backing node.
Verify this by asserting in said 030's test case that the base node is
always the top node's immediate backing child when both jobs are done.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324140907.17192-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This was attempted in commit 533b0a1a41 ("tests/tcg: Fix target-specific
Makefile variables path for user-mode", 2022-01-12) but it also used the
wrong path; default.mak is used for config/devices, not config/targets.
While at it, explain what the inclusion is about.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"make clean" should clear all binaries that have been built, but so
far it left the TCG tests still in place. Let's make sure that they
are now removed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220301085900.1443232-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
-----BEGIN PGP SIGNATURE-----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=fKgO
-----END PGP SIGNATURE-----
Merge tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu into staging
Fixes and cleanups for 7.0
Hi,
A collection of fixes & cleanup patches that should be safe for 7.0 inclusion.
# gpg: Signature made Tue 22 Mar 2022 12:11:30 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'fixes-pull-request' of gitlab.com:marcandre.lureau/qemu: (21 commits)
qapi: remove needless include
Remove trailing ; after G_DEFINE_AUTO macro
tests: remove needless include
error: use GLib to remember the program name
qga: remove bswap.h include
qapi: remove needless include
meson: fix CONFIG_ATOMIC128 check
meson: move int128 checks from configure
qapi: remove needless include
util: remove the net/net.h dependency
util: remove needless includes
scripts/modinfo-collect: remove unused/dead code
Move HOST_LONG_BITS to compiler.h
Simplify HOST_LONG_BITS
compiler.h: replace QEMU_SENTINEL with G_GNUC_NULL_TERMINATED
compiler.h: replace QEMU_WARN_UNUSED_RESULT with G_GNUC_WARN_UNUSED_RESULT
Replace GCC_FMT_ATTR with G_GNUC_PRINTF
Drop qemu_foo() socket API wrapper
m68k/nios2-semi: fix gettimeofday() result check
vl: typo fix in a comment
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit e3296cc796 made the ssh block
driver's error message for fingerprint mismatches more verbose, so it
now prints the actual host key fingerprint and the key type.
iotest 207 tests such errors, but was not amended to filter that
fingerprint (which is host-specific), so do it now. Filter the key
type, too, because I guess this too can differ depending on the host
configuration.
Fixes: e3296cc796
("block: print the server key type and fingerprint on failure")
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-3-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Allow filters for VM.run_job(), and pass the filters given to
VM.blockdev_create() to it.
(Use this opportunity to annotate VM.run_job()'s parameter types;
unfortunately, for the filter, I could not come up with anything better
than Callable[[Any], Any] that would pass mypy's scrutiny.)
At one point, a plain string is logged, so the filters passed to it must
work fine with plain strings. The only filters passed to it at this
point are the ones from VM.blockdev_create(), which are
filter_qmp_test_files() (by default) and 207's filter_hash(). Both
cannot handle plain strings yet, but we can make them by amending
filter_qmp() to treat them as plain values with a None key.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-2-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add a `check: bool = True` parameter to both functions and make their
qemu_img() invocations raise on error by default.
users of img_info_log:
206, 207, 210, 211, 212, 213, 237, 242, 266, 274, 302
users of qemu_img_log:
044, 209, 274, 302, 304
iotests 242 and 266 need to use check=False for their negative tests.
iotests 206, 210, 211, 212, 213, 237, 274 and 302 continue working
normally.
As of this commit, all calls to QEMU_IMG made from iotests enforce a
return code of zero by default unless explicitly disabled or suppressed
by passing check=False or with an exception handler.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-19-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
With the exceptional 'create' calls removed in the prior commit, change
qemu_img_log() and img_info_log() to call qemu_img() directly
instead.
For now, allow these calls to qemu-img to return non-zero on the basis
that any unusual output will be logged anyway. The very next commit
begins to enforce a successful exit code by default even for the logged
functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-18-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_log() calls into qemu_img_pipe(), which always removes output
for 'create' commands on success anyway. Replace all of these calls to
the simpler qemu_img_create(...) which doesn't log, but raises a
detailed exception object on failure instead.
Blank lines are removed from output files where appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-17-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Admittedly a mostly lateral move, but qemu_img() is essentially the
replacement for qemu_img_pipe_and_status(). It will give slightly better
diagnostics on crash.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-16-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
As part of moving all python iotest invocations of qemu-img onto a
single qemu_img() implementation, remove a few lingering uses of
qemu_img_pipe() from outside of iotests.py itself.
Several cases here rely on the knowledge that qemu_img_pipe() suppresses
*all* output on a successful case when the command being issued is
'create'.
065: This call's output is inspected, but it appears as if it's expected
to succeed. Replace this call with the checked qemu_img() variant
instead to get better diagnostics if/when qemu-img itself fails.
237: "create" call output isn't actually logged. Use qemu_img_create()
instead, which checks the return code. Remove the empty lines from
the test output.
296: Two calls;
-create: Expected to succeed. Like other create calls, the output
isn't actually logged. Switch to a checked variant
(qemu_img_create) instead. The output for this test is
a mixture of both test styles, so actually replace the
blank line for readability.
-amend: This is expected to fail. Log the output.
After this patch, the only uses of qemu_img_pipe are internal to
iotests.py and will be removed in subsequent patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-15-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe calls blank their output when the command being run is a
'create' call and the command succeeds. Thus, the normative output for
this command in iotest 149 is to print a blank line. We can remove the
logging from this invocation and use a checked invocation, but we still
need to inspect the actual output to see if we want to retroactively
skip the test due to missing cipher support.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-14-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe() discards the return code from qemu-img in favor of
returning just its output. Some tests using this function don't save,
log, or check the output either, though, which is unsafe.
Replace all of these calls with a checked version.
Tests affected are 194, 202, 203, 234, 262, and 303.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Similar to other recent changes: use the qemu_img() invocation that
supports throwing loud, nasty exceptions when it fails for surprising
reasons.
(Why would "--help" ever fail? I don't know, but eliminating *all* calls
to qemu-img that do not go through qemu_img() is my goal, so
qemu_img_pipe() has to be removed.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a qemu_img_map() function by analogy with qemu_img_measure(),
qemu_img_check(), and qemu_img_info() that all return JSON information.
Replace calls to qemu_img_pipe('map', '--output=json', ...) with this
new function, which provides better diagnostic information on failure.
Note: The output for iotest 211 changes, because logging JSON after it
was deserialized by Python behaves a little differently than logging the
raw JSON document string itself.
(iotests.log() sorts the keys for Python 3.6 support.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220321201618.903471-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This removes two more usages of qemu_img_pipe() and replaces them with
calls to qemu_img(), which provides better diagnostic information on
failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add qemu_img_info() by analogy with qemu_img_measure() and
qemu_img_check(). Modify image_size() to use this function instead to
take advantage of the better diagnostic information on failure provided
(ultimately) by qemu_img().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_json() gives better diagnostic information on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-8-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_json() is a new helper built on top of qemu_img() that tries to
pull a valid JSON document out of the stdout stream.
In the event that the return code is negative (the program crashed), or
the code is greater than zero and did not produce valid JSON output, the
VerboseProcessError raised by qemu_img() is re-raised.
In the event that the return code is zero but we can't parse valid JSON,
allow the JSON deserialization error to be raised.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220321201618.903471-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fortify compare_images() to be more discerning about the status codes it
receives. If qemu_img() returns an exit code that implies it didn't
actually perform the comparison, treat that as an exceptional
circumstance and force the caller to be aware of the peril.
If a negative test is desired (perhaps to test how qemu_img compare
behaves on malformed images, for instance), it is still possible to
catch the exception in the test and deal with that circumstance
manually.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-6-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
re-write qemu_img() as a function that will by default raise a
VerboseProcessException (extended from CalledProcessException) on
non-zero return codes. This will produce a stack trace that will show
the command line arguments and return code from the failed process run.
Users that want something more flexible (there appears to be only one)
can use check=False and manage the return themselves. However, when the
return code is negative, the Exception will be raised no matter what.
This is done under the belief that there's no legitimate reason, even in
negative tests, to see a crash from qemu-img.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img() returning zero ought to be the rule, not the
exception. Remove all explicit checks against the condition in
preparation for making non-zero returns an Exception.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Quoting the TAP specification: "The plan tells how many tests will be
run [...]. It’s a check that the test file hasn’t stopped prematurely."
That's a good idea of course, so let's support that in the iotest
testrunner, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223095816.2663005-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
If there is a failing iotest, the output is currently not logged to
the console anymore. To get this working again, we need to run the
meson test runner with "--print-errorlogs" (and without "--verbose"
due to a current meson bug that will be fixed here:
https://github.com/mesonbuild/meson/commit/c3f145ca2b9f5.patch ).
We could update the "meson test" call in tests/Makefile.include,
but actually it's nicer and easier if we simply do not treat the
iotests as separate test target anymore and integrate them along
with the other test suites. This has the disadvantage of not getting
the detailed progress indication there anymore, but since that was
only working right in single-threaded "make -j1" mode anyway, it's
not a huge loss right now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220310075048.2303495-1-thuth@redhat.com>
Tested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
These two spots have been missed in commit 9086c76398 ("Rework the
checks and spots using GNU sed") - they need GNU sed, too, since they
are using the "+" address form.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220309101626.637836-1-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Some qemu-iotests(040 etc) use PCI disk to do test. Without the
mapping, RISC-V flavor use spike as default machine which has no
PCI bus, causing test failure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/894
Signed-off-by: Kai Zhang <laokz@foxmail.com>
Message-Id: <tencent_E4219E870165A978DB5BBE50BD53D33D2E06@qq.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Initial patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
This uncovers a typing error:
../hw/9pfs/9p.c: In function ‘qid_path_fullmap’:
../hw/9pfs/9p.c:855:13: error: assignment to ‘QpfEntry *’ from incompatible pointer type ‘QppEntry *’ [-Werror=incompatible-pointer-types]
855 | val = g_new0(QppEntry, 1);
| ^
Harmless, because QppEntry is larger than QpfEntry. Manually fixed to
allocate a QpfEntry instead.
Cc: Greg Kurz <groug@kaod.org>
Cc: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220315144156.1595462-3-armbru@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/451. Without
the previous commit, we get:
$ make check-qtest-i386
...
Running test qtest-i386/fuzz-sdcard-test
==447470==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61500002a080 at pc 0x564c71766d48 bp 0x7ffc126c62b0 sp 0x7ffc126c62a8
READ of size 1 at 0x61500002a080 thread T0
#0 0x564c71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18
#1 0x564c7175f139 in sdhci_read hw/sd/sdhci.c:1022:19
#2 0x564c721b937b in memory_region_read_accessor softmmu/memory.c:440:11
#3 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#4 0x564c7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16
#5 0x564c7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9
#6 0x564c7212db5d in flatview_read_continue softmmu/physmem.c:2879:23
#7 0x564c7212f958 in flatview_read softmmu/physmem.c:2921:12
#8 0x564c7212f418 in address_space_read_full softmmu/physmem.c:2934:18
#9 0x564c721305a9 in address_space_rw softmmu/physmem.c:2962:16
#10 0x564c7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#11 0x564c7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12
#12 0x564c71759684 in dma_memory_read include/sysemu/dma.h:152:12
#13 0x564c7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27
#14 0x564c7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13
#15 0x564c7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9
#16 0x564c717629ee in sdhci_write hw/sd/sdhci.c:1212:9
#17 0x564c72172513 in memory_region_write_accessor softmmu/memory.c:492:5
#18 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#19 0x564c72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16
#20 0x564c721419ee in flatview_write_continue softmmu/physmem.c:2812:23
#21 0x564c721301eb in flatview_write softmmu/physmem.c:2854:12
#22 0x564c7212fca8 in address_space_write softmmu/physmem.c:2950:18
#23 0x564c721d9a53 in qtest_process_command softmmu/qtest.c:727:9
0x61500002a080 is located 0 bytes to the right of 512-byte region [0x615000029e80,0x61500002a080)
allocated by thread T0 here:
#0 0x564c708e1737 in __interceptor_calloc (qemu-system-i386+0x1e6a737)
#1 0x7ff05567b5e0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x5a5e0)
#2 0x564c71774adb in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5
SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:474:18 in sdhci_read_dataport
Shadow bytes around the buggy address:
0x0c2a7fffd3c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0c2a7fffd400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0c2a7fffd410:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
0x0c2a7fffd420: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd430: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd440: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd450: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2a7fffd460: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Heap left redzone: fa
Freed heap region: fd
==447470==ABORTING
Broken pipe
ERROR qtest-i386/fuzz-sdcard-test - too few tests run (expected 3, got 2)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215205656.488940-4-philmd@redhat.com>
[thuth: Replaced "-m 4G" with "-m 512M"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include the qtest reproducer provided by Alexander Bulekov
in https://gitlab.com/qemu-project/qemu/-/issues/542.
Without the previous commit, we get:
$ make check-qtest-i386
...
Running test tests/qtest/intel-hda-test
AddressSanitizer:DEADLYSIGNAL
=================================================================
==1580408==ERROR: AddressSanitizer: stack-overflow on address 0x7ffc3d566fe0
#0 0x63d297cf in address_space_translate_internal softmmu/physmem.c:356
#1 0x63d27260 in flatview_do_translate softmmu/physmem.c:499:15
#2 0x63d27af5 in flatview_translate softmmu/physmem.c:565:15
#3 0x63d4ce84 in flatview_write softmmu/physmem.c:2850:10
#4 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#5 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#6 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#7 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#8 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#9 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#10 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#11 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#12 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#13 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#14 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#15 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#16 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#17 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#18 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#19 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#20 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#21 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#22 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#23 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#24 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#25 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#26 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#27 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#28 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
#29 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1
#30 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1
#31 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12
#32 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5
#33 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5
#34 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5
#35 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9
#36 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5
#37 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9
#38 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5
#39 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5
#40 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18
#41 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16
#42 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23
#43 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12
#44 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18
#45 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16
#46 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#47 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12
#48 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12
...
SUMMARY: AddressSanitizer: stack-overflow softmmu/physmem.c:356 in address_space_translate_internal
==1580408==ABORTING
Broken pipe
Aborted (core dumped)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211218160912.1591633-4-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For both ldnt1 and stnt1, the meaning of the Rn and Rm are different
from ld1 and st1: the vector and integer registers are reversed, and
the integer register 31 refers to XZR instead of SP.
Secondly, the 64-bit version of ldnt1 was being interpreted as
32-bit unpacked unscaled offset instead of 64-bit unscaled offset,
which discarded the upper 32 bits of the address coming from
the vector argument.
Thirdly, validate that the memory element size is in range for the
vector element size for ldnt1. For ld1, we do this via independent
decode patterns, but for ldnt1 we need to do it manually.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/826
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220308031655.240710-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Race conditions can happen with the current code, because the port that
was available might not be anymore by the time the server is started.
By setting the port to 0, PhoneServer it will use the OS default
behavior to get a free port, then we save this information so we can
later configure the guest.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Beraldo Leal <bleal@redhat.com>
Message-Id: <20220311171127.2189534-1-bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test in order to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20220314104232.675863-4-iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
With -cpu max we get a warning:
qemu-s390x: warning: 'msa5-base' requires 'kimd-sha-512'.
But dropping the -cpu max and it still runs fine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220309112248.4083619-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
-----BEGIN PGP SIGNATURE-----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=PLdU
-----END PGP SIGNATURE-----
Merge tag 'darwin-20220315' of https://github.com/philmd/qemu into staging
Darwin-based host patches
- Remove various build warnings
- Fix building with modules on macOS
- Fix mouse/keyboard GUI interactions
# gpg: Signature made Tue 15 Mar 2022 12:52:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'darwin-20220315' of https://github.com/philmd/qemu: (21 commits)
MAINTAINERS: Volunteer to maintain Darwin-based hosts support
ui/cocoa: add option to swap Option and Command
ui/cocoa: capture all keys and combos when mouse is grabbed
ui/cocoa: release mouse when user switches away from QEMU window
ui/cocoa: add option to disable left-command forwarding to guest
ui/cocoa: Constify qkeycode translation arrays
configure: Pass filtered QEMU_OBJCFLAGS to meson
meson: Log QEMU_CXXFLAGS content in summary
meson: Resolve the entitlement.sh script once for good
osdep: Avoid using Clang-specific __builtin_available()
audio: Rename coreaudio extension to use Objective-C compiler
coreaudio: Always return 0 in handle_voice_change
audio: Log context for audio bug
audio/dbus: Fix building with modules on macOS
audio/coreaudio: Remove a deprecation warning on macOS 12
block/file-posix: Remove a deprecation warning on macOS 12
hvf: Remove deprecated hv_vcpu_flush() calls
hvf: Make hvf_get_segments() / hvf_put_segments() local
hvf: Use standard CR0 and CR4 register definitions
tests/fp/berkeley-testfloat-3: Ignore ignored #pragma directives
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since we already use -Wno-unknown-pragmas, we can also use
-Wno-ignored-pragmas. This silences hundred of warnings using
clang 13 on macOS Monterey:
[409/771] Compiling C object tests/fp/libtestfloat.a.p/berkeley-testfloat-3_source_test_az_f128_rx.c.o
../tests/fp/berkeley-testfloat-3/source/test_az_f128_rx.c:49:14: warning: '#pragma FENV_ACCESS' is not supported on this target - ignored [-Wignored-pragmas]
#pragma STDC FENV_ACCESS ON
^
1 warning generated.
Having:
$ cc -v
Apple clang version 13.0.0 (clang-1300.0.29.30)
Reported-by: Roman Bolshakov <roman@roolebo.dev>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
-----BEGIN PGP SIGNATURE-----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=A6RF
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20220314' of https://github.com/legoater/qemu into staging
ppc-7.0 queue :
* Removal of user-created PHB devices
* Avocado fixes for --disable-tcg
* Instruction and Radix MMU fixes
# gpg: Signature made Mon 14 Mar 2022 15:16:07 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20220314' of https://github.com/legoater/qemu:
ppc/pnv: Remove user-created PHB{3,4,5} devices
ppc/pnv: Always create the PHB5 PEC devices
ppc/pnv: Introduce a pnv-phb5 device to match root port
ppc/xive2: Make type Xive2EndSource not user creatable
target/ppc: fix xxspltw for big endian hosts
target/ppc: fix ISI fault cause for Radix MMU
avocado/ppc_virtex_ml507.py: check TCG accel in test_ppc_virtex_ml507()
avocado/ppc_prep_40p.py: check TCG accel in all tests
avocado/ppc_mpc8544ds.py: check TCG accel in test_ppc_mpc8544ds()
avocado/ppc_bamboo.py: check TCG accel in test_ppc_bamboo()
avocado/ppc_74xx.py: check TCG accel for all tests
avocado/ppc_405.py: check TCG accel in test_ppc_ref405ep()
avocado/ppc_405.py: remove test_ppc_taihu()
avocado/boot_linux_console.py: check TCG accel in test_ppc_mac99()
avocado/boot_linux_console.py: check TCG accel in test_ppc_g3beige()
avocado/replay_kernel.py: make tcg-icount check in run_vm()
avocado/boot_linux_console.py: check tcg accel in test_ppc64_e500
avocado/boot_linux_console.py: check for tcg in test_ppc_powernv8/9
qtest/meson.build: check CONFIG_TCG for boot-serial-test in qtests_ppc
qtest/meson.build: check CONFIG_TCG for prom-env-test in qtests_ppc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Fix a typo in the host endianness macro and add a simple test to detect
regressions.
Fixes: 9bb0048ec6 ("target/ppc: convert xxspltw to vector operations")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220310172047.61094-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test times out when running in an IBM POWER host and --disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-10-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All tests in the file times out when running in an IBM POWER host and
--disable-tcg with an error like the following:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine 40p (...)
Output: qemu-system-ppc: Register sync failed... If you're using
kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Since we don't have a way to detect whether the host is running kvm_hv
or kvm_pr, skip all tests if TCG is not available.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220310183011.110391-9-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This tests times out in an IBM POWER host when compiled with
--disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-8-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This tests times out in an IBM POWER host when compiled with
--disable-tcg.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-7-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
All tests of this file, when running in an IBM POWER host and with
--disable-tcg, fail in a similar manner:
Command: ./qemu-system-ppc -display none -vga none (...)
-cpu 7400 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
We don't have a way of telling which KVM module is loaded in a Power
host (kvm_hv or kvm_pr). For now let's make all the tests of this
file depend on TCG support.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test without TCG support in an IBM POWER server results
in the following error:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine ref405ep (...)
Output: qemu-system-ppc: Register sync failed... If you're using
kvm-hv.ko, only "-cpu host" is possible
qemu-system-ppc: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Although the host is running kvm_hv we don't have a way of differentiate
between kvm_hv and kvm_pr, meaning that this test would've failed in the
same way if kvm_pr was the KVM module loaded in the host.
Since we don't have a way of checking which KVM module is being loaded
when using avocado, make a TCG accel check in test_ppc_ref405ep().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Running this test gives us a deprecation warning telling that this
machine type is no longer supported:
Output: qemu-system-ppc: Machine type 'taihu' is deprecated:
incomplete, use 'ref405ep' instead
Moreover, this test fails to pass running in an IBM POWER host when
building QEMU with --disable-tcg.
Since the machine type is already being considered deprecated let's not
bother fixing the test with --disable-tcg. Remove test_ppc_taihu().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target in a similar manner as
test_ppc_g3beige did.
There's also an observation made about kvm_pr in the error message:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine mac99 (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
This means that, when/if we're able to detect kvm_pr support in these
avocado tests, we can revisit this test to not rely solely on TCG
availability.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This test breaks when run in an IBM POWER host with a QEMU compiled
with --disable-tcg and the ppc-softmmu target.
One thing to note is that the error message explictly mentions kvm_pr
support:
Command: ./qemu-system-ppc -display none -vga none (...)
-machine g3beige (...)
Output: ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try modprobe kvm_pr.
qemu-system-ppc: failed to initialize kvm: Invalid argument
The host was running kvm_hv, not kvm_pr, and the machine failed to load.
Unfortunately we don't have a way to detect whether the KVM module loaded
is kvm_hv or kvm_pr - we do a check for /dev/kvm to detect KVM support but
both modules create this file so that's not helpful.
Let's skip this test for now until we have a way of detecting kvm_pr support in the host.
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220310183011.110391-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The icount framework relies on TCG availability. If QEMU is built with
--disable-tcg we won't have icount either, and then this test will fail
with the following message in an IBM POWER9 host:
tests/avocado/replay_kernel.py:ReplayKernelNormal.test_ppc64_pseries:
ERROR: ConnectError: Failed to establish session:
(...)
/11-tests_avocado_replay_kernel.py_ReplayKernelNormal.test_ppc64_pseries/replay.bin:
cannot configure icount, TCG support not available
Although this was revealed in a specific ppc64 scenario, the TCG check
is being done in the common code inside run_vm() because all archs need
TCG to have access to icount.
Cc: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-6-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Some ppc64 hosts (e.g. IBM POWER hosts) aren't able to run the e500
machine using KVM accel. Skip this test if TCG accel isn't available.
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220303153517.168943-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PowerNV8/9 machines does not work with KVM acceleration, meaning
that boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8/9 tests
will always fail when QEMU is compiled with --disable-tcg:
ERROR 1-tests/avocado/boot_linux_console.py:BootLinuxConsole.test_ppc_powernv8
-> VMLaunchFailure: ConnectError: Failed to establish session:
[Errno 104] Connection reset by peer
Exit code: 1
Command: ./qemu-system-ppc64 -display none -vga none -chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-monitor.sock -mon chardev=mon,mode=control -machine powernv8 -chardev socket,id=console,path=/var/tmp/avo_qemu_sock_no19zg0m/qemu-1936936-7fffa77cff98-console.sock,server=on,wait=off -serial chardev:console -kernel /home/danielhb/avocado/data/cache/by_location/4514304e2c4ee84c5f0b5c8bacedda783891df68/zImage.epapr -append console=tty0 console=hvc0 -device pcie-pci-bridge,id=bridge1,bus=pcie.1,addr=0x0 -device nvme,bus=pcie.2,addr=0x0,serial=1234 -device e1000e,bus=bridge1,addr=0x3 -device nec-usb-xhci,bus=bridge1,addr=0x2
Output: qemu-system-ppc64: The powernv machine does not work with KVM acceleration
Let's add the TCG accel requirement in both tests to skip them if we
don't have TCG support available.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220303153517.168943-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'boot-serial-test' does not work with a QEMU built with --disable-tcg in
a IBM POWER9 host. The reason is that without TCG QEMU will default to
KVM acceleration, but then the KVM module in IBM POWER hosts aren't able
to handle other CPUs.
The result is that the test will break with a KVM error when trying to
ruin the ppce500 test:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/boot-serial-test
/ppc64/boot-serial/ppce500: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
error: kvm run failed Invalid argument
NIP 0000000000f00000 LR 0000000000000000 CTR 0000000000000000 XER 0000000000000000 CPU#0
MSR 0000000000000000 HID0 0000000000000000 HF 24020002 iidx 1 didx 1
TB 00000000 00000000 DECR 0
(...)
** (./tests/qtest/boot-serial-test:1935760): ERROR **: 07:44:03.010: Failed to find expected string. Please check '/tmp/qtest-boot-serial-sJ78sqg'
Fix it by checking CONFIG_TCG before compiling boot-serial-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
'prom-env-test' is a TCG test that will fail if QEMU is compiled with
--disable-tcg:
$ QTEST_QEMU_BINARY=./qemu-system-ppc64 ./tests/qtest/prom-env-test
/ppc64/prom-env/mac99: qemu-system-ppc64: -accel tcg: invalid accelerator tcg
(... hangs indefinitely ...)
Fix it by checking CONFIG_TCG before compiling prom-env-test.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220303153517.168943-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
On Hexagon, c4 is an alias for predicate registers P3:0. If we assign to
c4 inside a packet with reads from predicate registers, the predicate
reads should get the old values.
Test case added to tests/tcg/hexagon/preg_alias.c
Co-authored-by: Michael Lambert <mlambert@cuicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-13-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix typo that checked for 32 bit nan instead of 64 bit
Test case added in tests/tcg/hexagon/usr.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-11-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Replace consecutive inline asm blocks with a single one with proper
outputs/inputs/clobbers rather than making assumptions about register
values being carried between separate blocks.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-10-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a test that sets USR multiple times in a packet
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-9-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tests to confirm floating point instructions are properly
setting exception bits in USR
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-8-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Hexagon has ~200 instructions that set the saturate bit in USR, these
were broken into groups of similar instructions and one instruction
from each group is tested with at least one input that does not
saturate and at least one input that does saturate.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-7-tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
The float??_minnum implementation differs from Hexagon for SNaN,
it returns NaN, but Hexagon returns the other input. So, we use
float??_minimum_number.
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220308190410.22355-1-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The arch_sf_recip_common function was calling float32_getexp which
adjusts for denorm, but the we actually need the raw exponent bits.
This function is called from 3 instructions
sfrecipa
sffixupn
sffixupd
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20220210021556.9217-6-tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Richard Henderson