Commit Graph

153 Commits

Author SHA1 Message Date
Yifan Luo 09be82ce53 pc-bios/s390-ccw/net: fix a possible memory leak in get_uuid()
There is a possible memory leak in get_uuid(). Should free allocated mem
before
return NULL.

Signed-off-by: Yifan Luo <luoyifan@cmss.chinamobile.com>
Message-Id: <02cf01d55267$86cf2850$946d78f0$@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-18 17:47:27 +02:00
Thomas Huth 6673ded76c pc-bios/s390-ccw: Do not pre-initialize empty array
Since commit 339686a358 ("pc-bios/s390-ccw:
zero out bss section"), we are clearing now the BSS in start.S, so there
is no need to pre-initialize the loadparm_str array with zeroes anymore.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-18 17:47:27 +02:00
Jason J. Herne 2497b4a3c0 s390-bios: Skip bootmap signature entries
Newer versions of zipl have the ability to write signature entries to the boot
script for secure boot. We don't yet support secure boot, but we need to skip
over signature entries while reading the boot script in order to maintain our
ability to boot guest operating systems that have a secure bootloader.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1556543381-12671-1-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-08 10:52:14 +02:00
Markus Armbruster d796588ba1 pc-bios/s390-ccw: Clean up harmless misuse of isdigit()
atoui() and get_index() pass char values to isdigit().  With a
standard isdigit(), we'd get undefined behavior when the value is
negative.  Can't happen as char is unsigned on s390x.  Even if it
ould, we're actually using isdigit() from pc-bios/s390-ccw/libc.h
here, which works fine for negative values.  Clean up anyway, just
to avoid setting a bad example.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190418145355.21100-6-armbru@redhat.com>
[thuth: updated the commit message]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-08 10:52:14 +02:00
Jason J. Herne 2880469c95 s390-bios: Use control unit type to find bootable devices
When the user does not specify which device to boot from then we end
up guessing. Instead of simply grabbing the first available device let's
be a little bit smarter and only choose devices that might be bootable
like disk, and not console devices.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <1554388475-18329-17-git-send-email-jjherne@linux.ibm.com>
[thuth: Added fix for virtio_is_supported() not being called anymore]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne efa47d36da s390-bios: Support booting from real dasd device
Allows guest to boot from a vfio configured real dasd device.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 69333c36dc s390-bios: Add channel command codes/structs needed for dasd-ipl
The dasd IPL procedure needs to execute a few previously unused
channel commands. Let's define them and their associated data
structures.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-15-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 3668cb7ce8 s390-bios: Use control unit type to determine boot method
The boot method is different depending on which device type we are
booting from. Let's examine the control unit type to determine if we're
a virtio device. We'll eventually add a case to check for a real dasd device
here as well.

Since we have to call enable_subchannel() in main now, might as well
remove that call from virtio.c : run_ccw(). This requires adding some
additional enable_subchannel calls to not break calls to
virtio_is_supported().

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-14-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 9de6cbb152 s390-bios: Refactor virtio to run channel programs via cio
Now that we have a Channel I/O library let's modify virtio boot code to
make use of it for running channel programs.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-13-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 7b361db37b s390-bios: Factor finding boot device out of virtio code path
Make a new routine find_boot_device to locate the boot device for all
cases, not just virtio.

The error message for the case where no boot device has been specified
and a suitable boot device cannot be auto detected was specific to
virtio devices. We update this message to remove virtio specific wording.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-12-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 930072d2bf s390-bios: Extend find_dev() for non-virtio devices
We need a method for finding the subchannel of a dasd device. Let's
modify find_dev to handle this since it mostly does what we need. Up to
this point find_dev has been specific to only virtio devices.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-11-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 86c58705bb s390-bios: cio error handling
Add verbose error output for when unexpected i/o errors happen. This eases the
burden of debugging and reporting i/o errors. No error information is printed
in the success case, here is an example of what is output on error:

cio device error
  ssid  : 0x0000000000000000
  cssid : 0x0000000000000000
  sch_no: 0x0000000000000000

Interrupt Response Block Data:
    Function Ctrl : [Start]
    Activity Ctrl : [Start-Pending]
    Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
    Device Status : [Unit-Check]
    Channel Status :
    cpa=: 0x000000007f8d6038
    prev_ccw=: 0x0000000000000000
    this_ccw=: 0x0000000000000000
Eckd Dasd Sense Data (fmt 32-bytes):
    Sense Condition Flags :
    Residual Count     =: 0x0000000000000000
    Phys Drive ID      =: 0x000000000000009e
    low cyl address    =: 0x0000000000000000
    head addr & hi cyl =: 0x0000000000000000
    format/message     =: 0x0000000000000008
    fmt-dependent[0-7] =: 0x0000000000000004
    fmt-dependent[8-15]=: 0xe561282305082fff
    prog action code   =: 0x0000000000000016
    Configuration info =: 0x00000000000040e0
    mcode / hi-cyl     =: 0x0000000000000000
    cyl & head addr [0]=: 0x0000000000000000
    cyl & head addr [1]=: 0x0000000000000000
    cyl & head addr [2]=: 0x0000000000000000

The Sense Data section is currently only printed for ECKD DASD.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-10-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 3083a1bbb8 s390-bios: Support for running format-0/1 channel programs
Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.

Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1554388475-18329-9-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 1fb3e5cde8 s390-bios: ptr2u32 and u32toptr
Introduce inline functions to convert between pointers and unsigned 32-bit
ints. These are used to hide the ugliness required to  avoid compiler
warnings.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-8-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne c95df3d108 s390-bios: Map low core memory
Create a new header for basic architecture specific definitions and add a
mapping of low core memory. This mapping will be used by the real dasd boot
process.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-7-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 120d04103e s390-bios: Decouple channel i/o logic from virtio
Create a separate library for channel i/o related code. This decouples
channel i/o operations from virtio and allows us to make use of them for
the real dasd boot path.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-6-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne d96c5db77f s390-bios: Clean up cio.h
Add proper typedefs to all structs and modify all bit fields to use consistent
formatting.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-5-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne a5f6e0975b s390-bios: decouple common boot logic from virtio
Create a boot_setup function to handle getting boot information from
the machine/hypervisor. This decouples common boot logic from the
virtio code path and allows us to make use of it for the real dasd boot
scenario.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-4-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Jason J. Herne 87f910c142 s390-bios: decouple cio setup from virtio
Move channel i/o setup code out to a separate function. This decouples cio
setup from the virtio code path and allows us to make use of it for booting
dasd devices.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-3-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-12 12:40:35 +02:00
Thomas Huth 0d3a761398 pc-bios/s390-ccw: Use proper register names for Clang
When compiling the s390-ccw firmware with Clang 7.0.1, I get the
following errors:

pc-bios/s390-ccw/start.S:62:19: error: invalid use of length addressing
        stctg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:63:12: error: invalid use of length addressing
        oi 6(15), 0x2
           ^
pc-bios/s390-ccw/start.S:64:19: error: invalid use of length addressing
        lctlg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:76:19: error: invalid use of length addressing
        stctg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:77:12: error: invalid use of length addressing
        ni 6(15), 0xfd
           ^
pc-bios/s390-ccw/start.S:78:19: error: invalid use of length addressing
        lctlg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:79:12: error: invalid operand for instruction
        br 14
           ^

Let's use proper register names like in the rest of this file to fix it.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1547123559-30476-1-git-send-email-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18 11:52:00 +01:00
Thomas Huth 63c93fac18 pc-bios/s390-ccw: Optimize the s390-netboot.img for size
The -O2 optimization flag is passed via CFLAGS to the firmware Makefile,
but in netbook.mak, we've got some rules that only use QEMU_CFLAGS for
compiling the libc and libnet from SLOF, so these files get compiled
without optimization so far. Use CFLAGS here, too, to create faster
and smaller code.

We can additionally save some more bytes in the firmware images by compi-
ling the code with -fno-asynchronous-unwind-tables. This will omit some
ELF sections (used for stack unwinding for example) from the image that
we do not need in the firmware.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-18 15:08:44 +02:00
Thomas Huth 0d8261b506 pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
With the STSI instruction, we can get the UUID of the current VM instance,
so we can support loading pxelinux config files via UUID in the file name,
too.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-18 15:08:44 +02:00
Thomas Huth ec623990b3 pc-bios/s390-ccw/net: Add support for pxelinux-style config files
Since it is quite cumbersome to manually create a combined kernel with
initrd image for network booting, we now support loading via pxelinux
configuration files, too. In these files, the kernel, initrd and command
line parameters can be specified seperately, and the firmware then takes
care of glueing everything together in memory after the files have been
downloaded. See this URL for details about the config file layout:
https://www.syslinux.org/wiki/index.php?title=PXELINUX

The user can either specify a config file directly as bootfile via DHCP
(but in this case, the file has to start either with "default" or a "#"
comment so we can distinguish it from binary kernels), or a folder (i.e.
the bootfile name must end with "/") where the firmware should look for
the typical pxelinux.cfg file names, e.g. based on MAC or IP address.
We also support the pxelinux.cfg DHCP options 209 and 210 from RFC 5071.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-18 15:08:44 +02:00
Thomas Huth 134f0b3d7c pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
The ip_version information now has to be stored in the filename_ip_t
structure, and there is now a common function called tftp_get_error_info()
which can be used to get the error string for a TFTP error code.
We can also get rid of some superfluous "(char *)" casts now.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-18 15:08:44 +02:00
Collin Walling a0e11b617b pc-bios/s390-ccw: define loadparm length
Loadparm is defined by the s390 architecture to be 8 bytes
in length. Let's define this size in the s390-ccw bios.

Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-06-18 15:08:44 +02:00
Thomas Huth a6e4385dea pc-bios/s390-ccw: struct tpi_info must be declared as aligned(4)
I've run into a compilation error today with the current version of GCC 8:

In file included from s390-ccw.h:49,
                 from main.c:12:
cio.h:128:1: error: alignment 1 of 'struct tpi_info' is less than 4 [-Werror=packed-not-aligned]
 } __attribute__ ((packed));
 ^
cc1: all warnings being treated as errors

Since the struct tpi_info contains an element ("struct subchannel_id schid")
which is marked as aligned(4), we've got to mark the struct tpi_info as
aligned(4), too.

CC: qemu-stable@nongnu.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525774672-11913-1-git-send-email-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-05-14 17:10:02 +02:00
Cornelia Huck 63d8b5ace3 s390-ccw: force diag 308 subcode to unsigned long
We currently pass an integer as the subcode parameter. However,
the upper bits of the register containing the subcode need to
be 0, which is not guaranteed unless we explicitly specify the
subcode to be an unsigned long value.

Fixes: d046c51dad ("pc-bios/s390-ccw: Get device address via diag 308/6")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 15:35:19 +02:00
Thomas Huth c4942ee942 pc-bios/s390-ccw/net: Add support for .INS config files
The .INS config files can normally be found on CD-ROM ISO images,
so by supporting these files, it is now possible to boot directly
when the TFTP server is set up with the contents of such an CD-ROM
image.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:15 +02:00
Thomas Huth 9a848adf45 pc-bios/s390-ccw/net: Use diag308 to reset machine before jumping to the OS
The netboot firmware so far simply jumped directly into the OS kernel
after the download has been completed. This, however, bears the risk
that the virtio-net device still might be active in the background and
incoming packets are still placed into the buffers - which could destroy
memory of the now-running Linux kernel in case it did not take over the
device fast enough. Also the SCLP console is not put into a well-defined
state here. We should hand over the system in a clean state when jumping
into the kernel, so let's use the same mechanism as it's done in the
main s390-ccw firmware and reset the machine with diag308 into a clean
state before jumping into the OS kernel code. To be able to share the
code with the main s390-ccw firmware, the related functions are now
extracted from bootmap.c into a new file called jump2ipl.c.

Since we now also set the boot device schid at address 184 for the network
boot device, this patch also slightly changes the way how we detect the
entry points for non-ELF binary images: The code now looks for the "S390EP"
magic first and then jumps to 0x10000 in case it has been found. This is
necessary for booting from network devices, since the normal kernel code
(where the PSW at ddress 0 points to) tries to do a block load from the
boot device. This of course fails for a virtio-net device and causes the
kernel to abort with a panic-PSW silently.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Thomas Huth 0c18822953 pc-bios/s390-ccw/net: Split up net_load() into init, load and release parts
When we want to support pxelinux-style network booting later, we've got
to do several TFTP transfers - and we do not want to apply for a new IP
address via DHCP each time. So split up net_load into three parts:

1. net_init(), which initializes virtio-net, gets an IP address via DHCP
   and prints out the related information.

2. The tftp_load call is now moved directly into the main() function

3. A new net_release() function which should tear down the network stack
   before we are done in the firmware.

This will make it easier to extend the code in the next patches.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Collin Walling 622b391780 pc-bios/s390-ccw: fix non-sequential boot entries (enum)
zIPL boot menu entries can be non-sequential. Let's account
for this issue for the s390 enumerated boot menu. Since we
can no longer print a range of available entries to the
user, we have to present a list of each available entry.

An example of this menu:

  s390-ccw Enumerated Boot Menu.

   [0] default

   [1]
   [2]
   [7]
   [8]
   [9]
  [11]
  [12]

  Please choose:

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Collin Walling 7385e947fc pc-bios/s390-ccw: fix non-sequential boot entries (eckd)
zIPL boot menu entries can be non-sequential. Let's account
for this issue for the s390 zIPL boot menu. Since this boot
menu is actually an imitation and is not completely capable
of everything the real zIPL menu can do, let's also print a
different banner to the user.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Collin Walling 074afe60d4 pc-bios/s390-ccw: fix loadparm initialization and int conversion
Rename the loadparm char array in main.c to loadparm_str and
increased the size by one byte to account for a null termination
when converting the loadparm string to an int  via atoui. We
also allow the boot menu to be enabled when loadparm is set to
an empty string or a series of spaces.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Collin Walling 6df2a829df pc-bios/s390-ccw: rename MAX_TABLE_ENTRIES to MAX_BOOT_ENTRIES
The MAX_TABLE_ENTRIES constant has a name that is too generic. As we
want to declare a limit for boot menu entries, let's rename it to a more
fitting MAX_BOOT_ENTRIES and set its value to 31 (30 boot entries and
1 default entry). Also we move it from bootmap.h to s390-ccw.h to make
it available for menu.c in a later patch.

Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Thomas Huth e4f8696212 pc-bios/s390-ccw: size_t should be unsigned
"size_t" should be an unsigned type according to the C standard.
Thus we should also use this convention in the s390-ccw firmware to avoid
confusion. I checked the sources, and apart from one spot in libc.c, the
code should all be fine with this change.

Buglink: https://bugs.launchpad.net/qemu/+bug/1753437
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-05-02 11:27:14 +02:00
Viktor Mihajlovski e8c7ef288a s390: Do not pass inofficial IPL type to the guest
IPL over a virtio-scsi device requires special handling not
available in the real architecture. For this purpose the IPL
type 0xFF has been chosen as means of communication between
QEMU and the pc-bios. However, a guest OS could be confused
by seeing an unknown IPL type.

This change sets the IPL parameter type to 0x02 (CCW) to prevent
this. Pre-existing Linux has looked up the IPL parameters only in
the case of FCP IPL. This means that the behavior should stay
the same even if Linux checks for the IPL type unconditionally.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Message-Id: <1522940844-12336-4-git-send-email-mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-09 13:50:31 +02:00
Thomas Huth 23bf419c1c pc-bios/s390-ccw: Increase virtio timeout to 30 seconds
The current timeout is set to only three seconds - and considering that
vring_wait_reply() or rather get_second() is not doing any rounding,
the real timeout is likely rather 2 seconds in most cases. When the
host is really badly loaded, it's possible that we hit this timeout by
mistake; it's even more likely if we run the guest in TCG mode instead
of KVM.

So let's increase the timeout to 30 seconds instead to ease this situation
(30 seconds is also the timeout that is used by the Linux SCSI subsystem
for example, so this seems to be a sane value for block IO timeout).

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1549079
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1522316251-16399-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[CH: tweaked commit message]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-03 10:03:38 +02:00
Thomas Huth 6af978ae8b pc-bios/s390-ccw: Move string arrays from bootmap header to .c file
bootmap.h can currently only be included once - otherwise the linker
complains about multiple definitions of the "magic" strings. It's a
bad style to define string arrays in header files, so let's better
move these to the bootmap.c file instead where they are used.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1520317081-5341-1-git-send-email-thuth@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-03-08 15:49:23 +01:00
Collin L. Walling ffb4a1c807 s390-ccw: interactive boot menu for scsi
Interactive boot menu for scsi. This follows a similar procedure
as the interactive menu for eckd dasd. An example follows:

    s390x Enumerated Boot Menu.

    3 entries detected. Select from index 0 to 2.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Added additional "break;" statement to avoid analyzer warnings]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling 53b310ce53 s390-ccw: use zipl values when no boot menu options are present
If no boot menu options are present, then flag the boot menu to
use the zipl options that were set in the zipl configuration file
(and stored on disk by zipl). These options are found at some
offset prior to the start of the zipl boot menu banner. The zipl
timeout value is limited to a 16-bit unsigned integer and stored
as seconds, so we take care to convert it to milliseconds in order
to conform to the rest of the boot menu functionality. This is
limited to CCW devices.

For reference, the zipl configuration file uses the following
fields in the menu section:

      prompt=1      enable the boot menu
      timeout=X     set the timeout to X seconds

To explicitly disregard any boot menu options, then menu=off or
<bootmenu enable='no' ... /> must be specified.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling dbf2091aba s390-ccw: set cp_receive mask only when needed and consume pending service irqs
It is possible while waiting for multiple types of external
interrupts that we might have pending irqs remaining between
irq consumption and irq-type disabling. Those interrupts
could potentially propagate to the guest after IPL completes
and cause unwanted behavior.

As it is today, the SCLP will only recognize write events that
are enabled by the control program's send and receive masks. To
limit the window for, and prevent further irqs from, ASCII
console events (specifically keystrokes), we should only enable
the control program's receive mask when we need it.

While we're at it, remove assignment of the (non control program)
send and receive masks, as those are actually set by the SCLP.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling ff5dbf1bc3 s390-ccw: read user input for boot index via the SCLP console
Implements an sclp_read function to capture input from the
console and a wrapper function that handles parsing certain
characters and adding input to a buffer. The input is checked
for any erroneous values and is handled appropriately.

A prompt will persist until input is entered or the timeout
expires (if one was set). Example:

      Please choose (default will boot in 10 seconds):

Correct input will boot the respective boot index. If the
user's input is empty, 0, or if the timeout expires, then
the default zipl entry will be chosen. If the input is
within the range of available boot entries, then the
selection will be booted. Any erroneous input will cancel
the timeout and re-prompt the user.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling f717891084 s390-ccw: print zipl boot menu
When the boot menu options are present and the guest's
disk has been configured by the zipl tool, then the user
will be presented with an interactive boot menu with
labeled entries. An example of what the menu might look
like:

zIPL v1.37.1-build-20170714 interactive boot menu.

0. default (linux-4.13.0)

  1. linux-4.13.0
  2. performance
  3. kvm

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling ba831b2526 s390-ccw: read stage2 boot loader data to find menu
Read the stage2 boot loader data block-by-block. We scan the
current block for the string "zIPL" to detect the start of the
boot menu banner. We then load the adjacent blocks (previous
block and next block) to account for the possibility of menu
data spanning multiple blocks.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling 9eaa654ab3 s390-ccw: set up interactive boot menu parameters
Reads boot menu flag and timeout values from the iplb and
sets the respective fields for the menu.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:55 +01:00
Collin L. Walling 26b2a2a491 s390-ccw: parse and set boot menu options
Set boot menu options for an s390 guest and store them in
the iplb. These options are set via the QEMU command line
option:

    -boot menu=on|off[,splash-time=X]

or via the libvirt domain xml:

    <os>
      <bootmenu enable='yes|no' timeout='X'/>
    </os>

Where X represents some positive integer representing
milliseconds.

Any value set for loadparm will override all boot menu options.
If loadparm=PROMPT, then the menu will be enabled without a
timeout.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:54 +01:00
Collin L. Walling 118ee80f79 s390-ccw: move auxiliary IPL data to separate location
The s390-ccw firmware needs some information in support of the
boot process which is not available on the native machine.
Examples are the netboot firmware load address and now the
boot menu parameters.

While storing that data in unused fields of the IPL parameter block
works, that approach could create problems if the parameter block
definition should change in the future. Because then a guest could
overwrite these fields using the set IPLB diagnose.

In fact the data in question is of more global nature and not really
tied to an IPL device, so separating it is rather logical.

This commit introduces a new structure to hold firmware relevant
IPL parameters set by QEMU. The data is stored at location 204 (dec)
and can contain up to 7 32-bit words. This area is available to
programming in the z/Architecture Principles of Operation and
can thus safely be used by the firmware until the IPL has completed.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
[thuth: fixed "4 + 8 * n" comment]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:54 +01:00
Collin L. Walling fc0e208774 s390-ccw: update libc
Moved:
  memcmp from bootmap.h to libc.h (renamed from _memcmp)
  strlen from sclp.c to libc.h (renamed from _strlen)

Added C standard functions:
  isdigit

Added non C-standard function:
  uitoa
  atoui

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:54 +01:00
Collin L. Walling ac4c5958b1 s390-ccw: refactor IPL structs
ECKD DASDs have different IPL structures for CDL and LDL
formats. The current Ipl1 and Ipl2 structs follow the CDL
format, so we prepend "EckdCdl" to them. Boot info for LDL
has been moved to a new struct: EckdLdlIpl1.

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:54 +01:00
Collin L. Walling 80beedcc38 s390-ccw: refactor eckd_block_num to use CHS
Add new cylinder/head/sector struct. Use it to calculate
eckd block numbers instead of a BootMapPointer (which used
eckd chs anyway).

Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-02-26 07:56:54 +01:00