Perform the atomic update for hardware management of the access flag.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-13-richard.henderson@linaro.org
[PMM: Fix accidental PROT_WRITE to PAGE_WRITE; add missing
main-loop.h include]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace some gotos with some nested if statements.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both GP and DBM are in the upper attribute block.
Extend the computation of attrs to include them,
then simplify the setting of guarded.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leave the upper and lower attributes in the place they originate
from in the descriptor. Shifting them around is confusing, since
one cannot read the bit numbers out of the manual. Also, new
attributes have been added which would alter the shifts.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221024051851.3074715-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Always overriding fi->type was incorrect, as we would not properly
propagate the fault type from S1_ptw_translate, or arm_ldq_ptw.
Simplify things by providing a new label for a translation fault.
For other faults, store into fi directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The unconditional loop was used both to iterate over levels
and to control parsing of attributes. Use an explicit goto
in both cases.
While this appears less clean for iterating over levels, we
will need to jump back into the middle of this loop for
atomic updates, which is even uglier.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fault type is to be used with FEAT_HAFDBS when
the guest enables hw updates, but places the tables
in memory where atomic updates are unsupported.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Separate S1 translation from the actual lookup.
Will enable lpae hardware updates.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MMFR1 field may indicate support for hardware update of
access flag alone, or access flag and dirty bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hoist the computation of the mmu_idx for the ptw up to
get_phys_addr_with_struct and get_phys_addr_twostage.
This removes the duplicate check for stage2 disabled
from the middle of the walk, performing it only once.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20221024051851.3074715-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reduce the amount of typing required for this check.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221024051851.3074715-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The semantic difference between the deprecated device_legacy_reset()
function and the newer device_cold_reset() function is that the new
function resets both the device itself and any qbuses it owns,
whereas the legacy function resets just the device itself and nothing
else. In hyperv_synic_reset() we reset a SynICState, which has no
qbuses, so for this purpose the two functions behave identically and
we can stop using the deprecated one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-id: 20221013171817.1447562-1-peter.maydell@linaro.org
The code for handling the reset level count in the Resettable code
has two issues:
The reset count is only decremented for the 1->0 case. This means
that if there's ever a nested reset that takes the count to 2 then it
will never again be decremented. Eventually the count will exceed
the '50' limit in resettable_phase_enter() and QEMU will trip over
the assertion failure. The repro case in issue 1266 is an example of
this that happens now the SCSI subsystem uses three-phase reset.
Secondly, the count is decremented only after the exit phase handler
is called. Moving the reset count decrement from "just after" to
"just before" calling the exit phase handler allows
resettable_is_in_reset() to return false during the handler
execution.
This simplifies reset handling in resettable devices. Typically, a
function that updates the device state will just need to read the
current reset state and not anymore treat the "in a reset-exit
transition" as a special case.
Note that the semantics change to the *_is_in_reset() functions
will have no effect on the current codebase, because only two
devices (hw/char/cadence_uart.c and hw/misc/zynq_sclr.c) currently
call those functions, and in neither case do they do it from the
device's exit phase methed.
Fixes: 4a5fc890 ("scsi: Use device_cold_reset() and bus_cold_reset()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1266
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Michael Peter <michael.peter@hensoldt-cyber.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20221020142749.3357951-1-peter.maydell@linaro.org
Buglink: https://bugs.launchpad.net/qemu/+bug/1905297
Reported-by: Michael Peter <michael.peter@hensoldt-cyber.com>
[PMM: adjust the docs paragraph changed to get the name of the
'enter' phase right and to clarify exactly when the count is
adjusted; rewrite the commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An exception targeting EL2 from lower EL is actually maskable when
HCR_E2H and HCR_TGE are both set. This applies to both secure and
non-secure Security state.
We can remove the conditions that try to suppress masking of
interrupts when we are Secure and the exception targets EL2 and
Secure EL2 is disabled. This is OK because in that situation
arm_phys_excp_target_el() will never return 2 as the target EL. The
'not if secure' check in this function was originally written before
arm_hcr_el2_eff(), and back then the target EL returned by
arm_phys_excp_target_el() could be 2 even if we were in Secure
EL0/EL1; but it is no longer needed.
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Message-id: 20221017092432.546881-1-ake@igel.co.jp
[PMM: Add commit message paragraph explaining why it's OK to
remove the checks on secure and SCR_EEL2]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "PCI Bus Binding to: IEEE Std 1275-1994" defines the compatible
string for a PCIe bus or endpoint as "pci<vendorid>,<deviceid>" or
similar. Since the initial binding for PCI virtio-iommu didn't follow
this rule, it was modified to accept both strings and ensure backward
compatibility. Also, the unit-name for the node should be
"device,function".
Fix corresponding dt-validate and dtc warnings:
pcie@10000000: virtio_iommu@16:compatible: ['virtio,pci-iommu'] does not contain items matching the given schema
pcie@10000000: Unevaluated properties are not allowed (... 'virtio_iommu@16' were unexpected)
From schema: linux/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
virtio_iommu@16: compatible: 'oneOf' conditional failed, one must be fixed:
['virtio,pci-iommu'] is too short
'pci1af4,1057' was expected
From schema: dtschema/schemas/pci/pci-bus.yaml
Warning (pci_device_reg): /pcie@10000000/virtio_iommu@16: PCI unit address format error, expected "2,0"
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
FEAT_E0PD adds new bits E0PD0 and E0PD1 to TCR_EL1, which allow the
OS to forbid EL0 access to half of the address space. Since this is
an EL0-specific variation on the existing TCR_ELx.{EPD0,EPD1}, we can
implement it entirely in aa64_va_parameters().
This requires moving the existing regime_is_user() to internals.h
so that the code in helper.c can get at it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20221021160131.3531787-1-peter.maydell@linaro.org
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
=u7pS
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When number of CPUs utilized by guest Windows is less than defined in
QEMU (i.e., desktop versions of Windows severely limits number of CPU
sockets), patch_and_save_context routine accesses non-existent PRCB and
fails. So, limit number of processed PRCBs by NumberProcessors taken
from guest Windows driver.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221019235948.656411-1-viktor.prutyanov@redhat.com>
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
Let's add a few bits of code which hide the new KVM PV dump API from
us via new functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
[ Marc-André: fix up for compilation issue ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-10-frankja@linux.ibm.com>
Adding two s390x note types
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-9-frankja@linux.ibm.com>
Introduce an interface over which we can get information about UV data.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-8-frankja@linux.ibm.com>
All targets have been updated. Use the tcg_ops target hook
exclusively, which allows the compat code to be removed.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
